Infineon

CY7C68300A-56PVXC USB 2.0 ATA Bridge | Infineon

부품 번호: CY7C68300A-56PVXC ✓ 활성
56-pin SSOP Package
MOQ: 1 |

CY7C68300A-56PVXC 개요

The Infineon Technologies CY7C68300A-56PVXC is a fixed-function USB 2.0 to ATA or ATAPI bridge packaged in a 56-pin SSOP. It connects one USB port with one ATA- or ATAPI-based mass-storage device port and implements the USB Mass Storage Class Bulk-Only Transport specification. The device is intended for self-powered USB storage equipment. Its USB 2.0 interface, dedicated ATA/ATAPI port, and fixed-function architecture make the CY7C68300A-56PVXC suitable for external storage enclosures, backup appliances, archival systems, and embedded mass-storage products. The -56PVXC ordering code identifies the 56-SSOP package option, while the A version denotes the associated CY7C68300A product family.

A USB-to-ATA bridge is an interface controller that allows a USB host to communicate with a conventional parallel ATA or ATAPI storage device. Within the broader hierarchy, it is a USB interface controller, then a mass-storage interface IC, then a peripheral interface integrated circuit. This fixed-function category differs from a software-programmable USB controller: the bridge performs the USB mass-storage protocol conversion directly, reducing the host-side processing required for a compliant storage transfer.

The principal device characteristics are a USB 2.0 host connection, a dedicated ATA/ATAPI mass-storage connection, Mass Storage Class Bulk-Only Transport support, a 56-SSOP package, and operation in self-powered systems. Because it bridges USB to a parallel ATA device rather than directly driving a flash-based device, the design must also account for ATA signal integrity, connector pin assignment, cable or enclosure geometry, and power-supply capacity. The bridge consolidates these host-interface and mass-storage functions into one fixed-function controller.

Functionally, the CY7C68300A implements the command and data-path translation required for a USB host to exchange Bulk-Only Transport data with an ATA or ATAPI device. The USB side provides the external computer interface, while the ATA side communicates with the internal storage mechanism. This separation allows an existing ATA-based drive design to be reused in a USB enclosure, provided that the enclosure supplies adequate power, USB signaling, ATA wiring, and mechanical support.

Typical implementations include USB-to-IDE storage bridges, external hard-drive enclosures, portable backup appliances, media-copy systems, and industrial data-capture equipment with local storage. In these systems, the bridge can be placed directly between the USB connector and the ATA device connector, simplifying firmware requirements on the storage controller. Designers should also consider whether a direct USB-to-SATA interface would be more appropriate when the mechanical enclosure is designed specifically for SATA devices rather than legacy ATA connectors.

For layout, follow the pin-description table and reference layout in the manufacturer datasheet for the 56-SSOP footprint, signal routing, and decoupling. Pay particular attention to USB differential pair routing, ATA signal integrity, ground-return paths, and power-supply isolation between the USB and drive domains. Prototype the interface with the intended enclosure, cable, and storage device, and verify enumeration and sustained transfer behavior before releasing the PCB.

This page consolidates the manufacturer datasheet information, distributor catalog records, package details, protocol coverage, and practical interface-design guidance for engineers evaluating the CY7C68300A-56PVXC as a USB 2.0 mass-storage interface solution.

드롭인 대체품: CY7C68300A-56PVXC — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: CY7C68300A-56PVXC (동일 폼 팩터 및 풋프린트) — 차이점: Product Type, Package, Supply Voltage, Device Classification.

Infineon
Product Type: ROMless EZ-USB FX2LP USB 2.0 peripheral controller
Supply Voltage: 3 V to 3.6 V
비교 대상: CY7C68300A-56PVXC →
Infineon
Product Type: USB 2.0 to ATA/ATAPI interface controller
Package: 56-SSOP
Supply Voltage: 3.3 V
비교 대상: CY7C68300A-56PVXC →
Infineon
Product Type: USB 2.0 to ATA/ATAPI bridge controller
Supply Voltage: 3.3 V
Device Classification: Line or bus controller
비교 대상: CY7C68300A-56PVXC →

CY7C68300C-56PVXC

✅ 드롭인
Infineon
📦 56-SSOP
USB 2.0 to ATA/ATAPI bridge controller · USB 2.0 · Full Speed and High Speed · ATA/ATAPI · 3.3 V · 0°C to 70°C · Line or bus controller · 56-pin SSOP

가격 문의

데이터시트 보기 →

CY7C68300C-56PVC

✅ 드롭인 ⚠️ 사양 미검증
📦 56-SSOP
Same 56-pin SSOP outline and C-revision family; the available catalog listing does not quantify the A-versus-C functional differences.

📋 참조 대체품 (카탈로그에 없음)

CY7C68300A-56PVC

✅ 드롭인
Infineon
📦 56-SSOP
USB 2.0 to ATA/ATAPI interface controller · USB 2.0 · ATA/ATAPI · 3.3 V · 0°C to 70°C · 56-SSOP · 56 pins · Line and bus controller

가격 문의

데이터시트 보기 →

CY7C68013A-56PVXC

✅ 드롭인
Infineon
📦 56-SSOP
ROMless EZ-USB FX2LP USB 2.0 peripheral controller · 8051 EZ-USB · USB 2.0 · 16 KB · 24 GPIOs · 3 V to 3.6 V · 56-pin SSOP · 0.295 in, 7.50 mm

가격 문의

데이터시트 보기 →

CY7C68300A-56PVXC

✅ 드롭인 ⚠️ 사양 미검증
Infineon
📦 56-SSOP
Fixed-function USB to ATA/ATAPI bridge · USB 2.0 · 1 USB port · 1 ATA or ATAPI device port · USB Mass Storage Class Bulk-Only Transport · Fixed-function · 56-pin SSOP · Surface mount

가격 문의

데이터시트 보기 →

CY7C68300A-56PVXC 사양

Product Type Fixed-function USB to ATA/ATAPI bridge
USB Interface Version USB 2.0
Host Port Count 1 USB port
Storage Port Count 1 ATA or ATAPI device port
Supported Mass Storage Protocol USB Mass Storage Class Bulk-Only Transport
Architecture Fixed-function
패키지 56-pin SSOP
실장 유형 Surface mount
Intended Power Configuration Self-powered devices
Device Category USB bridge controller
Storage Interface ATA/ATAPI
Data Path USB host to ATA/ATAPI mass-storage device

CY7C68300A-56PVXC 56-pin ssop 핀 구성 가이드

CY7C68300A-56PVXC(56-pin ssop 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

CY7C68300A-56PVXC의 56-pin ssop 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: CY7C68300A-56PVXC.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

CY7C68300A-56PVXC 적합 용도: 6 애플리케이션s: USB-to-IDE External Storage Enclosure, Portable Backup and Media-Copy Appliance, Industrial Data-Logging Terminal, USB Storage Adapter for Legacy ATA Equipment, Self-Powered Archive and Imaging Station, AV and Broadcast Asset Transfer System.

💾

USB-to-IDE External Storage Enclosure

The Infineon CY7C68300A-56PVXC fits an enclosure that exposes a USB 2.0 connector to a host but stores data on a parallel ATA or ATAPI device. Place the bridge between the USB connector and the internal drive interface so the computer can access the drive through Mass Storage Class Bulk-Only Transport. Its fixed-function architecture removes the need to implement a USB mass-storage protocol stack in the storage controller. Because the manufacturer positions the device for self-powered systems, the enclosure must provide suitable local power for both the bridge and the storage mechanism. Validate the complete enclosure with the intended USB cable because USB signal integrity, ATA routing, and connector geometry all affect practical reliability.

📱

Portable Backup and Media-Copy Appliance

The CY7C68300A-56PVXC can bridge a USB 2.0 host connection to an ATA or ATAPI storage device in a portable backup appliance. The dedicated mass-storage interface allows the equipment to present a standard Bulk-Only Transport device to the host while keeping ATA handling in a dedicated controller. This arrangement is useful when the appliance uses a legacy parallel storage mechanism but needs a modern external connection. Power budgeting is essential because the part is intended for self-powered devices, and the attached storage mechanism may draw substantially more current than the bridge itself. Validate suspend, resume, and repeated-removal behavior in addition to sustained transfers.

🏭

Industrial Data-Logging Terminal

Use the CY7C68300A-56PVXC when an industrial data-logging terminal must transfer locally recorded information from an ATA or ATAPI device to a USB host. The bridge provides a fixed-function USB 2.0 mass-storage path and adheres to the Bulk-Only Transport specification, allowing a host to mount the storage device for file transfer. This can simplify the terminal's firmware compared with an embedded host that must implement USB mass-storage commands itself. The self-powered target architecture supports designs with an industrial battery or local supply. Keep the ATA path away from noisy actuator and power-conversion circuitry, and test read/write integrity over the full operating-temperature range required by the equipment.

🔧

USB Storage Adapter for Legacy ATA Equipment

The CY7C68300A-56PVXC is suitable for retrofitting USB connectivity to legacy equipment that retains an ATA or ATAPI device port. The fixed-function bridge translates between the USB host and the mass-storage device rather than requiring the legacy controller to be redesigned. A USB-to-ATA adapter board can therefore concentrate connector protection, data routing, and storage interfacing in one small assembly. The 56-SSOP package supports compact adapter construction, although the complete board still needs appropriate ATA signal routing, decoupling, and drive-power distribution. Confirm all connector assignments against the manufacturer pin-description table and verify hot-plug, removal, and error-recovery behavior with the actual storage mechanism.

🖥️

Self-Powered Archive and Imaging Station

The Infineon CY7C68300A-56PVXC can connect an ATA or ATAPI imaging drive to a USB 2.0 workstation in a self-powered archive or imaging station. The standard Bulk-Only Transport interface allows the workstation to recognize the attached storage device and exchange bulk data without a custom host-side protocol. Because the bridge is a fixed-function part, the design team can focus on power delivery, drive connectors, and mechanical reliability rather than USB protocol development. The self-powered design intent is particularly relevant for stations that must operate without relying on USB bus power. Validate command timing, sustained transfer stability, and recovery after a power interruption with the target drive selected for production.

🎥

AV and Broadcast Asset Transfer System

The CY7C68300A-56PVXC can support a USB-connected media-transfer system built around an ATA or ATAPI storage device. The bridge provides a standardized path for moving captured audio, video, or configuration files from the embedded storage to a workstation using USB Mass Storage Class Bulk-Only Transport. Its fixed-function operation is advantageous when the embedded system has limited processing capacity and cannot absorb an additional USB host stack. The design must maintain clean separation between the USB and ATA interfaces, especially when high-power media drives share the enclosure. Test with representative file sizes and multiple host operating systems, and verify that the enclosure's power supply maintains all required levels during sustained transfers.

What is the CY7C68300A-56PVXC?
The CY7C68300A-56PVXC is an Infineon Technologies fixed-function USB 2.0 to ATA or ATAPI bridge in a 56-pin SSOP package. According to the manufacturer datasheet, it implements a bridge between one USB port and one ATA- or ATAPI-based mass-storage device port. It supports the USB Mass Storage Class Bulk-Only Transport specification and is intended for self-powered devices.
Where can I download the CY7C68300A-56PVXC datasheet PDF?
The CY7C68300A-56PVXC datasheet PDF is available through the manufacturer document linked on this page. The document is titled for the EZ-USB AT2 USB 2.0 to ATA/ATAPI bridge and describes the fixed-function USB-to-storage architecture, Bulk-Only Transport behavior, package information, and application guidance. Use the pin-description and reference-layout sections before assigning PCB tracks.
What package does the CY7C68300A-56PVXC use?
The CY7C68300A-56PVXC uses a 56-pin SSOP package. Distributor catalog records identify the device as a 56-SSOP USB bridge with a USB 2.0 ATA interface. The manufacturer datasheet contains the definitive pin-description table and land pattern. Confirm pin functions and exposed connections from that table before laying out a replacement board.
What is the difference between CY7C68300A-56PVXC and CY7C68300C-56PVXC?
Both devices are listed as Infineon Technologies USB 2.0 ATA-interface bridge ICs in the 56-SSOP package, so they share the same mechanical footprint. The revision-specific functional differences between the A and C versions are not quantified in the available catalog records, and pin-level equivalence should not be assumed without reviewing each datasheet. Treat them as related family members rather than automatic drop-in replacements.
Can the CY7C68300A-56PVXC replace CY7C68013A-56PVXC?
The CY7C68013A-56PVXC appears in the same USB-to-ATA bridge cross-reference context, but the available records do not establish a complete pin-for-pin functional match. Because both devices use a 56-SSOP footprint, mechanical fit alone is insufficient for substitution. Compare the pin-description tables, power requirements, ATA feature support, and USB enumeration behavior from both manufacturer datasheets before approving the interchange.
What is the best drop-in replacement for the CY7C68300A-56PVXC?
The closest mechanically related options are the 56-SSOP CY7C68300 family variants, including CY7C68300C-56PVXC, CY7C68300C-56PVC, and CY7C68013A-56PVXC. No alternative has been confirmed as a complete pin-for-pin drop-in replacement because the available records do not compare all functional pins and operating conditions. A replacement should be qualified with a datasheet-level pin comparison and prototype testing.
When should I choose the CY7C68300A-56PVXC over a USB-to-SATA bridge?
Choose the CY7C68300A-56PVXC when the mechanical design already uses a parallel ATA or ATAPI device and you need a USB 2.0 bridge rather than a direct SATA interface. Its fixed-function Mass Storage Class Bulk-Only Transport implementation simplifies the host-to-drive path. A USB-to-SATA bridge is preferable when the enclosure is built around SATA connectors and native SATA signaling rather than legacy ATA.
Is the CY7C68300A-56PVXC suitable for external storage enclosures?
Yes, the CY7C68300A-56PVXC fits external storage enclosures that expose a USB connection and use an internal ATA or ATAPI device. Its fixed-function USB 2.0 to ATA/ATAPI bridge and Bulk-Only Transport support match the classic USB-to-IDE enclosure architecture. The enclosure must also meet the device's intended self-powered configuration and provide the required storage and interface circuitry.
How do I design the USB and ATA layout for the CY7C68300A-56PVXC?
Route the USB differential pair as a controlled-impedance pair and keep ATA signals short and properly referenced to a continuous ground plane. Follow the manufacturer datasheet's reference layout for decoupling, placement, and routing, and separate noisy drive-supply currents from sensitive interface areas. Validate signal integrity with the intended cable, enclosure, connector, and storage device because lead lengths can materially affect behavior.
What power supply configuration does the CY7C68300A-56PVXC require?
The manufacturer datasheet states that the CY7C68300A-56PVXC is intended for self-powered devices. The device therefore belongs in designs where the USB host or another local source supplies the system and drive power rather than relying on the USB bus alone. Use the datasheet's electrical requirements to set supply levels, sequencing, and current capacity for both the bridge and the attached storage device.
Where can I buy the CY7C68300A-56PVXC online?
Use the Request a Quote form on this page to request the CY7C68300A-56PVXC and obtain a current quotation, stock confirmation, and lead time from XAIPART. The manufacturer datasheet and distributor catalog records on this page support the part identification and technical specifications. Request the exact -56PVXC ordering code when submitting the inquiry.
What is the price of the CY7C68300A-56PVXC?
Submit the CY7C68300A-56PVXC through the Request a Quote form on this page to receive the current commercial quotation. Quote conditions, availability, and lead time can change with the exact package suffix, order quantity, and current inventory, so the live form is the appropriate source for this order. Request pricing for CY7C68300A-56PVXC specifically to avoid confusion with other family variants.
What is the lead time for the CY7C68300A-56PVXC?
Request the current lead time for CY7C68300A-56PVXC through the Request a Quote form on this page. Lead time depends on available stock, the exact package and suffix, and the requested quantity. Include your forecast volume and target date in the inquiry so the commercial response reflects the production schedule you actually need to support.
Is the CY7C68300A-56PVXC in stock?
Confirm current stock for the CY7C68300A-56PVXC through the Request a Quote form on this page. The part is presented as an active Infineon Technologies product with distributor catalog listings, but live inventory can vary by region, suffix, and quantity. Use the form for an availability response tied to your order quantity and delivery schedule.
What are the key specifications of CY7C68300A-56PVXC that engineers should know?
The key CY7C68300A-56PVXC specifications are a fixed-function architecture, one USB 2.0 host port, one ATA/ATAPI mass-storage port, USB Mass Storage Class Bulk-Only Transport support, and a 56-pin SSOP package. The manufacturer datasheet also identifies the intended application class as self-powered devices. Maximum transfer rate, supply voltage, and temperature limits require confirmation from the electrical tables.
What can replace the CY7C68300A-56PVXC?
Related 56-SSOP candidates include CY7C68300C-56PVXC, CY7C68300C-56PVC, and CY7C68013A-56PVXC, but the available records do not prove complete drop-in equivalence for any of them. Confirm pin compatibility, ATA command behavior, electrical limits, and USB enumeration with a manufacturer-level comparison. Treat the recommended alternatives as design-review candidates until that verification is complete.

엔지니어링 참조 데이터: CY7C68300A-56PVXC — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the CY7C68300A-56PVXC when the product must expose a USB 2.0 mass-storage connection while retaining a parallel ATA or ATAPI device interface. Its fixed-function implementation of the USB Mass Storage Class Bulk-Only Transport specification is the clearest fit for legacy-drive enclosures, backup appliances, and embedded transfer systems that do not need a programmable USB controller. Select CY7C68300C-56PVXC or CY7C68300C-56PVC only after comparing the C-revision electrical and pin details. Consider CY7C68013A-56PVXC when the associated bridge feature set better matches the storage mechanism, but do not approve it on package similarity alone. For new SATA-based products, a native USB-to-SATA controller may be a better architectural choice. Whatever part is selected, qualify the complete design with the intended drive, cable, enclosure, power supply, and host system.

대체품과의 비교

파라미터 이 제품 CY7C68300C-56PVXC CY7C68300C-56PVC CY7C68300A-56PVC CY7C68013A-56PVXC
Brand Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies
Package 56-SSOP 56-SSOP 56-SSOP 56-SSOP 56-SSOP

주요 차별점

  • Dedicated fixed-function USB-to-ATA bridge (vs CY7C68013A-56PVXC)
  • Established 56-pin SSOP mechanical footprint (vs CY7C68300C-56PVXC)
  • Direct USB 2.0 ATA interface integration (vs CY7C68300A-56PVC)

설계 노트

Use the manufacturer datasheet's reference layout as the basis for component placement and signal routing. Route the USB differential pair as a compact impedance-controlled pair, provide a continuous ground reference, and place decoupling capacitance close to the associated supply pins. Keep ATA traces away from switching-converter outputs and high-current drive-supply paths. Because no public pin list was confirmed for this page, use the pin-description table in the manufacturer datasheet when assigning every footprint location.

Design the enclosure around the self-powered architecture identified in the manufacturer datasheet. The bridge and the attached ATA or ATAPI storage device may require local supply capacity beyond what the USB host can provide. Separate the bridge's clean interface supply from drive-related current where practical, and confirm voltage tolerances, startup sequencing, and maximum load current from the electrical characteristics tables before releasing the power design.

Do not treat the 56-SSOP footprint as proof that any CY7C68300 or CY7C68013 family member is automatically interchangeable. Verify every pin, the ATA feature set, USB enumeration behavior, supply limits, and operating-temperature requirements against the manufacturer datasheets. Prototype with the intended storage device and cable, and test enumeration, sustained transfers, unexpected removal, power interruption, and recovery before approving a replacement for production.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

No explicit compliance declarations were present in the retrieved manufacturer and distributor records. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status with the current manufacturer documentation before release.

데이터 검증일: 2026-11-10 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

CY7C68300A-56PVXC CY7C68300A-56PVXC datasheet CY7C68300A-56PVXC datasheet pdf CY7C68300A-56PVXC pinout CY7C68300A-56PVXC equivalent CY7C68300A-56PVXC replacement CY7C68300A-56PVXC cross reference CY7C68300A-56PVXC vs CY7C68300C-56PVXC Infineon CY7C68300A-56PVXC CY7C68300A-56PVXC USB 2.0 ATA bridge CY7C68300A 56-SSOP USB bridge CY7C68300A-56PVXC external storage CY7C68300A-56PVXC schematic CY7C68300A-56PVXC price CY7C68300A-56PVXC stock

관련 부품 & 용어

Infineon Technologies CY7C68300A-56PVXC CY7C68300A EZ-USB AT2 USB bridge controller USB-to-ATA bridge USB 2.0 ATA ATAPI USB Mass Storage Class Bulk-Only Transport fixed-function controller mass-storage interface IC peripheral interface integrated circuit 56-pin SSOP surface-mount package self-powered device USB host port mass-storage device port USB differential pair ATA signal integrity bulk data transfer Cypress Semiconductor
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기