CY8C3665AXI-017 - 32KB Flash 67MHz PSoC 3 | Infineon
MPN: CY8C3665AXI-017 ✓ AktifCY8C3665AXI-017 Ringkasan
A PSoC, or programmable system-on-chip, belongs to the microcontroller and embedded-signal-processing hierarchy. Unlike a conventional fixed-function MCU, a PSoC integrates a CPU, flash memory, digital programmable blocks, analog resources, and configurable I/O into a common embedded architecture. This allows designers to adapt peripheral behavior through firmware rather than relying entirely on discrete logic or fixed silicon functions. The CY8C3665AXI-017 belongs to the CY8C36xx PSoC 3 family.
Key features include 32KB flash, an 8-bit 8051-compatible processor operating up to 67MHz, a 0.5V to 5.5V operating range, and 62 I/O pins. The configurable peripheral architecture supports application-specific digital and analog functions, while the 100-pin TQFP package provides a substantial pin count for mixed-signal and connectivity-oriented designs. These characteristics make the device suitable for industrial control, sensing, communications, and embedded automation systems.
Technical performance depends on the selected PSoC configuration, clock settings, analog components, firmware, and external circuit implementation. The 67MHz figure is the stated maximum MCU operating frequency rather than a guarantee that every peripheral configuration runs at that rate. Because the device includes configurable blocks, designers should review the applicable Infineon PSoC 3 family documentation for clock trees, interrupt behavior, analog specifications, pin multiplexing, memory organization, and electrical limits before finalizing a PCB.
Typical applications include industrial sensor controllers, building automation interfaces, compact data acquisition modules, communications equipment, consumer accessories, and embedded control products. In each case, the MCU manages system sequencing while configurable digital and analog blocks implement timing, signal conditioning, conversions, or interface functions. The 62 available I/O pins are particularly useful when a design must combine external sensors, status indicators, serial links, and programmable control outputs.
Designers should place decoupling capacitors close to the supply pins, route sensitive analog signals away from high-current switching paths, and validate every pin configuration in the device configuration tool. Firmware must also account for startup behavior, interrupt sharing, and the effects of peripheral configuration on available clocks and I/O. The 100-pin package requires careful fanout and via placement to preserve component accessibility.
This product page combines the exact orderable MPN, core electrical and packaging details, drop-in replacement guidance, application-specific design context, and a parameter comparison. It also highlights the practical checks needed to move from a generic PSoC concept to a manufacturable CY8C3665AXI-017 design.
Alternatif penggantian untuk CY8C3665AXI-017 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian CY8C3665AXI-017 (sama faktor bentuk dan footprint) — berbeda di dalam Package, Product Type, Program Flash Memory, SRAM.
CY8C3665AXI-016T
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
CY8C3665AXI-198
✅ Drop-InKontak untuk harga
Lihat Datasheet →CY8C3665AXI-016
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →CY8C3665AXI-015
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
CY8C3665AXI-014
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
CY8C3665AXI-017 Rating Maksimal & Karakteristik Listrik
| Product Type | Flash-programmable system-on-chip (PSoC 3) |
| CPU Architecture | 8-bit 8051-compatible |
| Maximum CPU Frequency | 67 MHz |
| Program Flash Memory | 32 KB |
| Operating Voltage Range | 0.5 V to 5.5 V |
| Number of I/O Pins | 62 pins |
| Paket | 100-pin TQFP, 14 mm x 14 mm |
| Tipe Mounting | Surface mount |
| Programmable Digital Blocks | 16 universal digital blocks |
| Programming Interface | In-system programming (ISP) |
| Programmable System-on-Chip Family | CY8C36xx PSoC 3 |
| Maximum Operating Frequency | 67 MHz |
CY8C3665AXI-017 100-pin tqfp, 14 mm x 14 mm Diamant Konfigurasi Panduan
Konfigurasi pin untuk CY8C3665AXI-017 (100-pin tqfp, 14 mm x 14 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk CY8C3665AXI-017.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
CY8C3665AXI-017 cocok untuk 6 aplikasis: Industrial Sensor Controller, Building Automation Interface, Compact Data Acquisition Module, Communications Equipment, Embedded Automation Controller, Consumer Accessory Controller.
Industrial Sensor Controller
The CY8C3665AXI-017 fits industrial sensor controllers because its 8-bit 8051-compatible CPU runs up to 67MHz while configurable digital and analog blocks can handle acquisition timing and signal conditioning near the sensor. The 62 available I/O pins support switches, status indicators, actuators, and field-bus or serial transceiver connections without requiring a large external logic device. Its 32KB flash provides room for calibration, filtering, diagnostics, and communications firmware. The principal design consideration is thermal and signal-integrity margin: sensitive sensor traces should remain short, isolated from switching nodes, and referenced to a clean ground plane.
Direkomendasikan
Building Automation Interface
The CY8C3665AXI-017 is suitable for building automation interfaces that combine local sensing, relay control, status feedback, and serial communications. Its 100-pin TQFP package provides 62 I/O pins, allowing one controller to connect digital inputs, occupancy sensors, outputs, and communication transceivers while retaining resources for timing and protocol handling. The 67MHz maximum CPU frequency supports responsive event processing and periodic diagnostics, while 32KB flash accommodates the application firmware. Designers should use the PSoC configuration tools to prevent peripheral conflicts and should validate output states during reset because field-installed equipment must remain predictable.
Direkomendasikan
Compact Data Acquisition Module
The CY8C3665AXI-017 can serve as the control core of a compact data-acquisition module that must combine sensor inputs, digital triggers, local storage of control parameters, and an isolated communications link. The PSoC 3 architecture lets configurable blocks perform deterministic timing and signal conditioning while the 8-bit CPU handles calibration, sampling control, and protocol processing. With 32KB flash and 62 I/O pins, the device supports a focused measurement product without relying on a separate FPGA. For accurate results, the analog reference, ground arrangement, supply decoupling, and trigger routing must be evaluated as a complete signal chain.
Direkomendasikan
Communications Equipment
The CY8C3665AXI-017 fits communications equipment in which a protocol controller must manage buffering, status, configuration, and several digital interfaces. Its 67MHz 8051-compatible processor provides sufficient headroom for protocol state machines, while the 62 I/O pins can support UART, SPI, or other serial interfaces implemented through the PSoC architecture. The 32KB flash can hold boot logic, protocol handlers, and diagnostics. In a high-speed or electrically noisy enclosure, keep external transceiver interfaces away from sensitive clock and analog routes, use controlled impedance for high-speed edges, and confirm timing margins under the selected peripheral clock configuration.
Direkomendasikan
Embedded Automation Controller
The CY8C3665AXI-017 is appropriate for embedded automation controllers that combine deterministic I/O, configurable timing, local logic, and communication in a single design. The 67MHz processor can execute state machines for pumps, valves, indicators, interlocks, and service interfaces, while the PSoC digital blocks offload repetitive counting, waveform generation, or protocol timing. Its 62 I/O pins reduce the need for external logic in machines with multiple discrete signals. The 100-pin TQFP is appropriate for a multilayer board, though designers should preserve via access beneath fine-pitch leads and validate thermal performance across the full ambient and enclosure temperature range.
Direkomendasikan
Consumer Accessory Controller
The CY8C3665AXI-017 can support consumer accessories that need flexible control, tactile inputs, status LEDs, communications, and low-power behavior. Configurable PSoC blocks can implement timing and interface functions while the 8051-compatible core coordinates the product state machine. The 32KB flash is suitable for a compact application with local configuration, and the 0.5V to 5.5V operating range supports multiple embedded power architectures. For battery-powered products, power consumption must be evaluated with the final clock, analog, and I/O configuration rather than only the CPU headline frequency, and unused pins should be assigned according to the device documentation.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk CY8C3665AXI-017 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | CY8C3665AXI-016T | CY8C3665AXI-198 | CY8C3665AXI-016 | CY8C3665AXI-015 | CY8C3665AXI-014 |
|---|---|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | 100-pin TQFP (14 mm x 14 mm) | 100-pin TQFP (14 mm x 14 mm) | 100-pin TQFP (14 mm x 14 mm) | 100-pin TQFP (14 mm x 14 mm) | 100-pin TQFP (14 mm x 14 mm) | 100-pin TQFP (14 mm x 14 mm) |
Diferensiator Kunci
- High pin count for configurable embedded control (vsCY8C3665AXI-016T)
- Confirmed 32KB flash and 16 universal digital blocks (vsCY8C3665AXI-198)
- 67MHz 8-bit PSoC 3 processing (vsCY8C3665AXI-016)
Catatan Desain
Reserve the 100-pin TQFP footprint exactly as defined by the package drawing and preserve via access beneath the fine-pitch leads. Route sensitive analog inputs away from digital clock and serial interface traces, and use a continuous ground reference where possible. Place the required bypass capacitors adjacent to the device power pins rather than distributing them around the board; their ESR, voltage rating, and placement can materially affect transient response and digital noise.
The listed operating range of 0.5V to 5.5V does not mean every peripheral combination should be evaluated at 0.5V. Establish the actual system rail, clock frequency, active analog blocks, and output-load conditions before release. If the PSoC shares a supply with sensors or communications transceivers, separate noisy load paths from the MCU rail and use local bulk and high-frequency bypass capacitance near the regulator and device.
Do not assign the 62 I/O pins until all fixed-function leads, supply pins, programming pins, clock resources, and shared peripheral functions have been reviewed in the pin-description table. A pin marked as general-purpose I/O may belong to a specific programmable block or alternate function. Export the final configuration and compare it against the schematic to prevent resource conflicts, unintended pin muxing, and programming errors.
Configure external clock, reset, programming, and serial interfaces for the voltage levels and timing margins required by the chosen system. Keep programming and debug access accessible after assembly, provide a deterministic reset path, and avoid long unprotected branches on externally driven signals. For mixed-signal designs, establish analog and digital return paths so switching currents do not share the sensor reference ground segment.
Informasi Konformitas
The manufacturer and distributor product information confirms the device identity, electrical headline specifications, package, and programmable architecture but does not provide explicit compliance declarations for this exact order code.