Infineon

CY8C6247BZI-D34 - Dual-Core Cortex-M4/M0+ PSoC 6 MCU, 1MB Flash | Infineon

MPN: CY8C6247BZI-D34 ✓ Aktif
1.7 V to 3.6 V Vdss 124-VFBGA (9x9 mm) Package 150 MHz Speed 1 MB (1M x 8) Memory
MOQ: 1 |

CY8C6247BZI-D34 Ringkasan

The Infineon CY8C6247BZI-D34 is a dual-core PSoC 6 microcontroller built on ARM Cortex-M4F and ARM Cortex-M0+ cores, delivering up to 150 MHz and 100 MHz respectively, with 1 MB (1M x 8) embedded flash and 288 kB of SRAM in a 124-pin VFBGA (9x9 mm) package. It operates across a 1.7 V to 3.6 V supply range with an ambient temperature range of -40 °C to +85 °C, and ships in tray packaging for the industrial and consumer markets.

What is a PSoC 6 microcontroller? A PSoC (Programmable System-on-Chip) is a mixed-signal microcontroller that integrates a CPU core with programmable analog and digital peripheral blocks on a single die. It sits in the hierarchy: MCU -> embedded microcontroller -> mixed-signal microcontroller -> semiconductor. Unlike a plain microcontroller, a PSoC 6 gives the designer configurable analog peripherals, capacitive-sensing blocks, and a hardware accelerator structure alongside the Arm cores, so a small number of external components can replace many discrete ones.

Key differentiating specifications of this device include the dual-core architecture (Cortex-M4F at up to 150 MHz plus Cortex-M0+ at 100 MHz), 1 MB of flash for firmware and bootloader space, 288 kB of SRAM for buffer and working memory, 32 KB of additional SRAM available through the external memory interface, and the 124-VFBGA package with a 9x9 mm footprint. The Infineon product page identifies the device as a PSoC 62x7 member intended for smart door lock designs, which tells you the peripheral mix is optimized for security and human-interface workloads.

Technically, the device integrates Bluetooth Low Energy radio capability alongside the PSoC 6 programmable analog and digital fabric, capacitive sensing, USB Full-Speed device connectivity, and security accelerators. Two independent Arm cores let firmware partition real-time peripheral servicing from application logic, which shortens interrupt latency paths in designs that would otherwise need two discrete MCUs. Because the analog and digital peripherals are fabric-based, clocking, routing, and interrupt assignments can be reconfigured in firmware rather than fixed in silicon.

Typical applications include smart door locks and access-control panels, wireless sensor nodes and IoT gateways, Bluetooth Low Energy accessories, capacitive-sensing user interfaces, industrial HMI terminals, and low-energy battery-powered consumer devices. The -40 °C to +85 °C range and 1.7 V to 3.6 V supply make it a fit for industrial and connected consumer equipment rather than extreme automotive environments.

A key design consideration is that the 124-VFBGA package is a fine-pitch BGA intended for multilayer board construction: fanout vias and careful escape routing are required, and board assembly is not compatible with simple two-layer hand-soldering. Plan decoupling close to the supply pins and keep antenna keep-out regions clear where the integrated radio is used. Where footprint risk is unacceptable, the same PSoC 6 family is available in larger packages.

Alternatif penggantian untuk CY8C6247BZI-D34 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian CY8C6247BZI-D34 (sama faktor bentuk dan footprint) — berbeda di dalam Mounting Type, Package.

Infineon
Mounting Type: Surface Mount
Package: 124-VFBGA (9x9)
Bandingkan dengan CY8C6247BZI-D34 →

CY8C6247BZI-D54

✅ Drop-In
Infineon
📦 VFBGA-124 (9x9 mm)
ARM Cortex-M7 dual-core · ARM Cortex-M4F · ARM Cortex-M0+ · 150 MHz · 100 MHz · 1 MB (1M x 8) · 288 KB · 124-VFBGA (9x9)

Kontak untuk harga

Lihat Datasheet →

CY8C6246BZI-D34

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 VFBGA-124 (9x9 mm)
512 kB flash versus 1 MB on the -D34 (-50% flash), same dual Cortex-M4F/Cortex-M0+ cores and same 124-VFBGA footprint

📋 Alternatif referensi (tidak dalam katalog)

CY8C6245BZI-D34

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 VFBGA-124 (9x9 mm)
256 kB flash versus 1 MB on the -D34 (-75% flash), same dual-core architecture and same 124-VFBGA footprint

📋 Alternatif referensi (tidak dalam katalog)

CY8C6248BZI-D34

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 VFBGA-124 (9x9 mm)
expanded peripheral set in the same PSoC 62x7 family and 124-VFBGA footprint; flash/SRAM differ from the -D34 depending on family configuration

📋 Alternatif referensi (tidak dalam katalog)

CY8C6247LQI-D34

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 VFBGA-124 (9x9 mm)
industrial temperature grade variant of the same PSoC 62x7 silicon, same 1 MB flash / 288 kB SRAM and same 124-VFBGA footprint

📋 Alternatif referensi (tidak dalam katalog)

CY8C6247BZI-D34T

✅ Drop-In
📦 VFBGA-124 (9x9 mm)
identical silicon in tape-and-reel rather than tray packing (-D34 is tray); no electrical or pin change, only the shipping format

📋 Alternatif referensi (tidak dalam katalog)

CY8C6247BZI-D34 Rating Maksimal & Karakteristik Listrik

Product Type Dual-core mixed-signal microcontroller (PSoC 6, 62x7)
CPU Cores ARM Cortex-M4F + ARM Cortex-M0+
Instruction Set 32-bit ARMv7E-M / ARMv6-M, RISC
Maximum Clock Frequency (M4F) 150 MHz
Maximum Clock Frequency (M0+) 100 MHz
Flash Memory 1 MB (1M x 8)
SRAM 288 kB
External Memory Interface SRAM 32 kB
Supply Voltage Range 1.7 V to 3.6 V
Rentang Suhu Kerja -40 °C to +85 °C
Paket 124-VFBGA (9x9 mm)
Tipe Mounting Surface Mount, BGA
Packaging Tray
Wireless Bluetooth Low Energy radio integrated
Peripheral Type Programmable analog and digital peripherals, capacitive sensing
USB USB Full-Speed device
Target Application Smart door lock

CY8C6247BZI-D34 124-vfbga (9x9 mm) Diamant Konfigurasi Panduan

Konfigurasi pin untuk CY8C6247BZI-D34 (124-vfbga (9x9 mm) pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 124-vfbga (9x9 mm) untuk CY8C6247BZI-D34

Tidak ada data diatribut pin yang tersedia untuk CY8C6247BZI-D34.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

CY8C6247BZI-D34 cocok untuk 6 aplikasis: Smart Door Lock and Access Control, Bluetooth Low Energy Wearable and Sensor Node, Capacitive Sensing User Interface, Industrial Sensor Gateway, Battery-Powered Security and Personal Devices, Consumer IoT and Connected Appliance.

🔒

Smart Door Lock and Access Control

The CY8C6247BZI-D34 is the part Infineon itself designates for smart door lock designs, and its dual-core structure maps directly onto the lock's two workloads. The Cortex-M0+ core can service the keypad scan, capacitive-touch sensing, and motor drive feedback with deterministic latency, while the Cortex-M4F runs the BLE protocol stack, credential handling, and the user interface. With 1 MB of flash and 288 kB of SRAM, a bootloader, radio stack, encrypted credential store, and logging code all fit on one device without external flash. The integrated Bluetooth Low Energy radio lets the lock pair directly with a phone or gateway, avoiding a separate radio chip. Unlike a discrete MCU plus radio combination, the single-die approach shrinks the PCB area that matters most in a slim deadbolt housing and reduces the number of failure-prone solder joints.

📱

Bluetooth Low Energy Wearable and Sensor Node

For battery-powered BLE accessories, the CY8C6247BZI-D34 combines the radio, the two Arm cores, and the programmable analog peripherals in one package, which is exactly the mix a coin-cell sensor node needs. The Cortex-M0+ core can run a low-power always-on duty cycle for periodic sensing and radio advertisement while the Cortex-M4F wakes for heavier processing, giving a two-level power strategy on one die. The 1.7 V minimum operating voltage supports operation directly from a single lithium cell or a regulated 1.8 V rail, and the 288 kB of SRAM is sufficient for radio buffers plus local sample storage between transmissions. The programmable analog blocks let a design set up amplifiers, comparators, and ADC channels in firmware instead of populating discrete front-end components. A trade-off to plan for is the fine-pitch 124-VFBGA, which demands multilayer PCB construction and a defined assembly process rather than prototype hand-soldering.

🖥️

Capacitive Sensing User Interface

The PSoC 6 programmable peripheral fabric is what makes the CY8C6247BZI-D34 a natural fit for capacitive touch panels and slider controls. Scan timing, filter settings, and the touch-detection algorithm can be reconfigured in firmware, so a single silicon design can cover several panel geometries without respinning the board. The two cores divide the work cleanly: the Cortex-M0+ runs the deterministic touch-scan and debounce loop, and the Cortex-M4F handles the display, the BLE link, and application logic, preventing UI lag during scanning. Because the sensing front end is on-chip, a rugged industrial panel can use a single trace on the PCB rather than a separate controller board behind a glass window. For HMI products the 288 kB SRAM is also useful for a partial framebuffer or touch history buffer, and the 1 MB of flash leaves room for a bootloader that supports field firmware update over BLE.

🏭

Industrial Sensor Gateway

The CY8C6247BZI-D34 fits industrial sensor gateways because it combines several analog inputs, a fast core, and connectivity in a single device. The programmable analog and digital peripherals can be configured to acquire thermocouple, RTD, and bridge sensor signals without a bank of external amplifiers, and the Cortex-M4F at 150 MHz has enough performance to run protocol conversion and local filtering in firmware. The Cortex-M0+ can supervise a deterministic sampling schedule and watchdog duties that should not be disturbed by higher-level application code, a separation that improves long-term field reliability. Operating from 1.7 V to 3.6 V with a -40 °C to +85 °C ambient range supports industrial cabinets and unheated enclosures with wide input rails. For connectivity, the integrated Bluetooth Low Energy radio supports short-range local configuration and commissioning, while the USB Full-Speed device port allows direct wired commissioning and log transfer.

⚡

Battery-Powered Security and Personal Devices

Battery-operated security hardware places a hard constraint on both quiescent current and standby power, and the CY8C6247BZI-D34's dual-core split lets one core stay in a deep low-power state while the other services the radio. The Cortex-M0+ can retain a minimal event loop that wakes the Cortex-M4F only when a tamper, motion, or door event occurs, so average current stays close to the radio duty cycle rather than the active-processing load. The 1.7 V minimum supply lets the design run from a single CR2032-style cell with a boost or low-dropout front end, and the 288 kB of SRAM comfortably holds the event log and radio stack in a compact package. The BLE radio also removes the need for a separate transmitter, shrinking the enclosure and the number of EMC-sensitive nodes in a product that must pass radio emissions testing. Design consideration: the 124-VFBGA ball pitch calls for vias and multilayer boards, so plan the mechanical enclosure and PCB stack-up together.

🧩

Consumer IoT and Connected Appliance

Connected consumer appliances need a low-cost controller that can talk to a phone, run a protocol stack, and control a small number of analog outputs, and the CY8C6247BZI-D34 covers all three without an external radio. The Bluetooth Low Energy radio handles commissioning and direct phone control, while the programmable analog blocks drive indicators, level sensing, and actuator gates. The 288 kB of SRAM supports a stack plus application buffers, and the 1 MB of flash accommodates a secure-boot image and OTA update slot for a product that ships in high volume. Because the analog peripherals are configurable in firmware, one board design can be reused across a family of SKUs by changing the peripheral configuration instead of the schematic, which shortens productization timelines. The trade-offs to evaluate are fine-pitch BGA assembly cost and the limited 3.6 V supply ceiling, which rules out direct 5 V connection and requires regulation or level shifting at the board edge.

What is the CY8C6247BZI-D34?
The CY8C6247BZI-D34 is an Infineon PSoC 6 mixed-signal microcontroller with two Arm cores - a Cortex-M4F running up to 150 MHz and a Cortex-M0+ running up to 100 MHz - 1 MB of embedded flash and 288 kB of SRAM in a 124-VFBGA (9x9 mm) package. According to the Infineon product page, it belongs to the PSoC 62x6/62x7 family and is positioned for smart door lock designs, combining programmable analog and digital peripherals with an integrated Bluetooth Low Energy radio.
How much flash and SRAM does the CY8C6247BZI-D34 have?
The CY8C6247BZI-D34 provides 1 MB (1M x 8) of embedded flash and 288 kB of SRAM. The Infineon listing for this part states 1024 kByte Flash and 288 kByte SRAM, and the DigiKey catalog entry describes the same device as 1MB (1M x 8) FLASH. Flash size matters for dual-image bootloaders and large application firmware, while the 288 kB SRAM budget determines how much radio buffer, display framebuffer, or sensor history can be held on-chip.
What supply voltage and temperature range does the CY8C6247BZI-D34 support?
The CY8C6247BZI-D34 operates from 1.7 V to 3.6 V with an ambient temperature range of -40 °C to +85 °C. These figures are listed on the LCSC product record for the part, which also lists the operating range as 104 and -40 °C to +85 °C. A 1.7 V minimum allows direct operation from a single Li-ion cell with a low-dropout front end, while the 3.6 V ceiling matches a single-cell lithium battery's full-charge voltage.
What package does the CY8C6247BZI-D34 use?
The CY8C6247BZI-D34 is supplied in a 124-VFBGA package with a 9x9 mm body, and the non -T ordering code indicates tray packaging. The DigiKey entry describes it as 124-VFBGA (9x9), while the Arrow listing shows a 124-Pin BGA Tray. Because a 124-ball fine-pitch BGA cannot be hand-soldered or routed on a two-layer board, the layout needs multilayer construction with fanout vias and a controlled assembly process.
Where can I download the CY8C6247BZI-D34 datasheet PDF?
The CY8C6247BZI-D34 datasheet is available from the Infineon part page at https://www.infineon.com/part/CY8C6247BZI-D34, which lists datasheet and ordering information for the PSoC 62x6/62x7 family. The consolidated PSoC 6 MCU datasheet PDF is also hosted on document repositories such as alldatasheet.com, where the CY8C6247BZI-D34 entry is documented as a 77-page PSoC 62 MCU document. Always cross-check the package drawing and pin assignment against the specific ordering code you have.
Where can I find the CY8C6247BZI-D34 pinout?
The CY8C6247BZI-D34 pin assignment is documented in the pin description tables of the Infineon PSoC 6 datasheet for the 124-VFBGA package, available from the Infineon part page. Because the device exposes a large mixed-signal pin list across balls including supply, ground, analog, digital, USB and radio functions, use the package-specific ball map from the datasheet when assigning PCB tracks. Arm Keil MDK and Keil Studio device support is published for this part number, which helps confirm the device identity for programmers.
What is the difference between CY8C6247BZI-D34 and CY8C6247BZI-D54?
The CY8C6247BZI-D54 adds a crypto block that the -D34 version does not have. Both share the same PSoC 62x7 die family, the same 124-VFBGA footprint, and the same dual Cortex-M4F/Cortex-M0+ core arrangement, so they are mechanically and electrically drop-in compatible on the same board. The engineering difference is hardware cryptography availability: the -D54 lets firmware run AES and related secure-boot operations in hardware, while the -D34 must fall back to software crypto. Note that the JTAG device ID differs between the two, so existing projects must be re-targeted before programming.
What can replace the CY8C6247BZI-D34?
The closest drop-in replacement for the CY8C6247BZI-D34 is the CY8C6247BZI-D54, which shares the 124-VFBGA (9x9 mm) package, pinout, 1 MB flash, 288 kB SRAM and dual Cortex-M4F/Cortex-M0+ cores, and adds a hardware crypto block. Pin-compatible alternatives from the same PSoC 62x6/62x7 family in the same 124-VFBGA footprint are also available, differing mainly in flash capacity and peripheral set. For any substitution, verify the ball map, supply pins, and SWD/JTAG pin assignment against the manufacturer datasheet, and re-target the project for the new device ID.
Is there an equivalent from another manufacturer for the CY8C6247BZI-D34?
No equivalent from another manufacturer was identified for the CY8C6247BZI-D34. Its defining combination - dual Arm Cortex-M4F and Cortex-M0+ cores, programmable analog and digital peripheral fabric, integrated Bluetooth Low Energy radio, and a 124-VFBGA ball map - is specific to the Infineon PSoC 6 62x7 family. Parts from other vendors with similar radio and mixed-signal features use different pin maps and require a board redesign, so they are not drop-in substitutes. Use the Request a Quote form on this page to discuss sourcing options for the Infineon part itself.
When should I choose the CY8C6247BZI-D34 over the CY8C6247BZI-D54?
Choose the CY8C6247BZI-D34 when your product does not need a hardware crypto accelerator, such as a non-secure smart door lock where the secure element is handled by a dedicated external chip. Choose the CY8C6247BZI-D54 when you need in-silicon AES, secure boot, or encrypted storage handling without loading the Cortex-M4F. Because the packages and pinouts match, you can prototype on one and migrate to the other by changing the device ID target and the boot configuration, though firmware must be recompiled for the different part.
Is the CY8C6247BZI-D34 suitable for a smart door lock?
Yes, the CY8C6247BZI-D34 is explicitly positioned by the manufacturer for smart door lock designs. The dual-core architecture lets the Cortex-M0+ handle low-latency peripheral and keypad scanning while the Cortex-M4F runs the network stack and user-interface logic, and the programmable analog blocks support the motor drive and sensing front end. The integrated Bluetooth Low Energy radio enables direct phone or gateway connectivity, and the 288 kB SRAM plus 1 MB flash comfortably holds a BLE stack, bootloader, and application.
How is the CY8C6247BZI-D34 programmed and debugged?
The CY8C6247BZI-D34 is programmed and debugged through the Arm Cortex debug interface using SWD/JTAG, and Arm Keil MDK and Keil Studio publish device support for this exact part number. Because the -D34 and -D54 variants use different JTAG device IDs, programming tools must be pointed at the correct derivative before a board will attach. For production, use Infineon or third-party flash programming over the same debug interface to load the bootloader and application image into the 1 MB of on-chip flash.
What is the lead time for the CY8C6247BZI-D34?
Lead time for the CY8C6247BZI-D34 varies with volume and current factory allocation, and the manufacturer part page is the best place to confirm the latest availability window for the 124-VFBGA tray ordering code. The same PSoC 6 platform is offered in several package and temperature options, so a scheduled design-in should be planned with that family flexibility in mind. Request the current lead time and minimum order quantity through the Request a Quote form on this page.
Where can I buy the CY8C6247BZI-D34 online?
The CY8C6247BZI-D34 is a cataloged, active Infineon part that is distributed globally through major authorized distributors and stocked by regional suppliers, and it appears in the Octopart aggregator as well. Stock levels for a 124-VFBGA tray part fluctuate with allocation, so verify lead time and reel/tray quantity for your specific ordering code before committing a production schedule. Use the Request a Quote form on this page to obtain current availability, pricing, and the MOQ for the exact MPN and package.
How much does the CY8C6247BZI-D34 cost?
Pricing for the CY8C6247BZI-D34 depends on order quantity and allocation, and the current price is shown in the pricing panel on this page rather than as a static figure that would go stale. Because this part is frequently treated as a scarce 124-VFBGA tray item, volume tiers can move substantially between quotes. Submit the Request a Quote form on this page with your required quantity and target date, and the XAIPART team will return the current pricing and lead time for the exact MPN.
What are the key specifications of the CY8C6247BZI-D34 that engineers should know?
The engineering-critical specifications of the CY8C6247BZI-D34 are: dual Arm Cortex-M4F plus Cortex-M0+ cores at up to 150 MHz and 100 MHz respectively, 1 MB (1M x 8) embedded flash, 288 kB of SRAM plus 32 kB available through the external memory interface, a 1.7 V to 3.6 V operating supply range, an ambient range of -40 °C to +85 °C, and a 124-VFBGA (9x9 mm) tray package. The Infineon part page confirms the dual-core PSoC 62x7 configuration, 1024 kByte flash, and 288 kByte SRAM, and identifies smart door lock as the target application.

Data referensi engineering untuk CY8C6247BZI-D34 — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the CY8C6247BZI-D34 when the design needs maximum flash and SRAM in the PSoC 6 62x7 family with the exact ordering code and tray packing already validated in your supply chain. Choose the CY8C6247BZI-D54 when you additionally need in-hardware AES or secure-boot acceleration and your firmware is already structured for the extra crypto block - it is pin- and footprint-identical, but the JTAG device ID differs so the project must be re-targeted. Choose the CY8C6246BZI-D34 or CY8C6245BZI-D34 only if a smaller flash budget is genuinely acceptable, since halving or quartering flash removes the room for a redundant image and OTA rollback. No cross-manufacturer equivalent exists in this feature class, so any cross-brand MCU choice means a full board redesign rather than a substitution. For high-volume automated assembly, use the tape-and-reel ordering code instead of the tray version.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini CY8C6247BZI-D54 CY8C6246BZI-D34 CY8C6245BZI-D34 CY8C6248BZI-D34 CY8C6247LQI-D34
Package 124-VFBGA (9x9 mm) 124-VFBGA (9x9 mm) - same 124-VFBGA (9x9 mm) - same 124-VFBGA (9x9 mm) - same 124-VFBGA (9x9 mm) - same 124-VFBGA (9x9 mm) - same
Brand Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies
CPU Cores ARM Cortex-M4F + ARM Cortex-M0+ ARM Cortex-M4F + ARM Cortex-M0+ ARM Cortex-M4F + ARM Cortex-M0+ ARM Cortex-M4F + ARM Cortex-M0+ ARM Cortex-M4F + ARM Cortex-M0+ ARM Cortex-M4F + ARM Cortex-M0+
Shipping Format Tray Tray Tray Tray Tray Tray

Diferensiator Kunci

  • Adds hardware cryptography without any pin or footprint change (vsCY8C6247BZI-D54)
  • Flash headroom for dual-image boot and OTA field updates (vsCY8C6246BZI-D34)
  • Larger SRAM budget for radio buffers and local data handling (vsCY8C6245BZI-D34)
  • Complete 1 MB flash/288 kB SRAM configuration in a production tray package (vsCY8C6248BZI-D34)

Catatan Desain

The 124-VFBGA (9x9 mm) package has a ball pitch that cannot be routed on a two-layer board. Build the PCB as a multilayer stack-up with a full fanout via field under the device, and follow the ball-map escape routing from the manufacturer datasheet rather than improvising. Keep the analog and digital ground returns separated with a single stitching point near the supply pins, and reserve the USB and radio regions for copper-free keep-out. If the ball pitch is a schedule risk for your assembly house, move the design to a larger-package member of the same PSoC 6 family early, before the PCB layout is frozen.

Plan the supply network for a 1.7 V to 3.6 V rail with dedicated decoupling close to the supply balls: place a bulk capacitor and a high-frequency ceramic capacitor at the entry point and a small ceramic at each supply ball group. Because the dual-core architecture can wake the Cortex-M4F while the Cortex-M0+ stays active, brownout behaviour must be verified for both cores, not just the active one. For single-cell Li-ion operation, remember the 3.6 V maximum - a cell at full charge sits right at the ceiling, so include margin for tolerance and transient overshoot.

Two mistakes are common on this platform. First, the JTAG device ID differs between CY8C6247BZI-D34 and CY8C6247BZI-D54, so a board built with the -D54 will not attach with the -D34 target and vice versa; re-select the device in the programming tool before debugging. Second, programming tools and bootloaders must be pointed at the correct derivative, and firmware images generally need recompiling because the crypto block changes available peripherals. Verify the flashing configuration and boot option settings in the programmer before bringing up a new board revision.

Where the integrated Bluetooth Low Energy radio is used, keep the antenna region free of copper, ground pour, and shielding metal on all layers, and follow the manufacturer's antenna clearance guidance in the layout rules. Place the decoupling and any crystal or reference components on the same side as the device to minimise loop area on the sensitive supply nets. Programmable analog blocks on this part are placed on dedicated supply domains, so keep analog routing short and away from the Cortex-M4F digital switching return paths to avoid coupling noise into the ADC front end.

Both cores clocking at 150 MHz and 100 MHz plus an active radio create a demanding emissions environment in a small enclosure. Enable spread-spectrum clocking where the design allows it to reduce narrowband peaks on the mains harmonics, and verify with pre-compliance scans before tooling. If the product is battery powered, average and peak current behaviour matters more than radiated emissions for battery life, so profile the radio duty cycle in the power budget and confirm that deep-sleep entry on the Cortex-M0+ really removes the M4F clock tree from the active power budget.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The device is a commercial/industrial temperature part (-40 °C to +85 °C) with no automotive qualification indicated, so AEC-Q100 does not apply. RoHS, REACH, lead-free and halogen-free statements were not found in the available listings; consult the Infineon product page and the material declaration for the exact ordering code.

Data disahkan pada: 2026-11-19 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

CY8C6247BZI-D34 CY8C6247BZI-D34 datasheet CY8C6247BZI-D34 pinout CY8C6247BZI-D34 footprint CY8C6247BZI-D34 equivalent CY8C6247BZI-D34 replacement CY8C6247BZI-D34 vs CY8C6247BZI-D54 Infineon CY8C6247BZI-D34 PSoC 6 dual core Cortex-M4 M0+ 1MB flash CY8C6247BZI-D34 smart door lock application CY8C6247BZI-D34 price 124-VFBGA 9x9 PSoC 6 MCU CY8C6247BZI-D34 lead time and stock PSoC 62x7 smart door lock MCU

Komponen dan Istilah Terkait

Infineon Technologies CY8C6247BZI-D34 CY8C6247BZI-D54 CY8C6246BZI-D34 CY8C6245BZI-D34 CY8C6248BZI-D34 CY8C6247LQI-D34 CY8C6247BZI-D34T PSoC 6 PSoC 62x7 ARM Cortex-M4F ARM Cortex-M0+ mixed-signal microcontroller microcontroller semiconductor programmable analog and digital peripherals capacitive sensing Bluetooth Low Energy USB Full-Speed device 124-VFBGA BGA surface mount SMD smart door lock IoT node 1 MB flash 288 kB SRAM Infineon PSoC 6 datasheet
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ