CY8C6247BZI-D34 - Dual-Core Cortex-M4/M0+ PSoC 6 MCU, 1MB Flash | Infineon
MPN: CY8C6247BZI-D34 ✓ فعالCY8C6247BZI-D34 جائزہ
What is a PSoC 6 microcontroller? A PSoC (Programmable System-on-Chip) is a mixed-signal microcontroller that integrates a CPU core with programmable analog and digital peripheral blocks on a single die. It sits in the hierarchy: MCU -> embedded microcontroller -> mixed-signal microcontroller -> semiconductor. Unlike a plain microcontroller, a PSoC 6 gives the designer configurable analog peripherals, capacitive-sensing blocks, and a hardware accelerator structure alongside the Arm cores, so a small number of external components can replace many discrete ones.
Key differentiating specifications of this device include the dual-core architecture (Cortex-M4F at up to 150 MHz plus Cortex-M0+ at 100 MHz), 1 MB of flash for firmware and bootloader space, 288 kB of SRAM for buffer and working memory, 32 KB of additional SRAM available through the external memory interface, and the 124-VFBGA package with a 9x9 mm footprint. The Infineon product page identifies the device as a PSoC 62x7 member intended for smart door lock designs, which tells you the peripheral mix is optimized for security and human-interface workloads.
Technically, the device integrates Bluetooth Low Energy radio capability alongside the PSoC 6 programmable analog and digital fabric, capacitive sensing, USB Full-Speed device connectivity, and security accelerators. Two independent Arm cores let firmware partition real-time peripheral servicing from application logic, which shortens interrupt latency paths in designs that would otherwise need two discrete MCUs. Because the analog and digital peripherals are fabric-based, clocking, routing, and interrupt assignments can be reconfigured in firmware rather than fixed in silicon.
Typical applications include smart door locks and access-control panels, wireless sensor nodes and IoT gateways, Bluetooth Low Energy accessories, capacitive-sensing user interfaces, industrial HMI terminals, and low-energy battery-powered consumer devices. The -40 °C to +85 °C range and 1.7 V to 3.6 V supply make it a fit for industrial and connected consumer equipment rather than extreme automotive environments.
A key design consideration is that the 124-VFBGA package is a fine-pitch BGA intended for multilayer board construction: fanout vias and careful escape routing are required, and board assembly is not compatible with simple two-layer hand-soldering. Plan decoupling close to the supply pins and keep antenna keep-out regions clear where the integrated radio is used. Where footprint risk is unacceptable, the same PSoC 6 family is available in larger packages.
کے لیے ڈراپ اِن متبادل CY8C6247BZI-D34 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں CY8C6247BZI-D34 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Mounting Type, Package.
CY8C6247BZI-D54
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →CY8C6246BZI-D34
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
CY8C6245BZI-D34
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
CY8C6248BZI-D34
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
CY8C6247LQI-D34
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
CY8C6247BZI-D34T
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
CY8C6247BZI-D34 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | Dual-core mixed-signal microcontroller (PSoC 6, 62x7) |
| CPU Cores | ARM Cortex-M4F + ARM Cortex-M0+ |
| Instruction Set | 32-bit ARMv7E-M / ARMv6-M, RISC |
| Maximum Clock Frequency (M4F) | 150 MHz |
| Maximum Clock Frequency (M0+) | 100 MHz |
| Flash Memory | 1 MB (1M x 8) |
| SRAM | 288 kB |
| External Memory Interface SRAM | 32 kB |
| Supply Voltage Range | 1.7 V to 3.6 V |
| آپریٹنگ درجہ حرارت رینج | -40 °C to +85 °C |
| پیکیج | 124-VFBGA (9x9 mm) |
| ماؤنٹنگ ٹائپ | Surface Mount, BGA |
| Packaging | Tray |
| Wireless | Bluetooth Low Energy radio integrated |
| Peripheral Type | Programmable analog and digital peripherals, capacitive sensing |
| USB | USB Full-Speed device |
| Target Application | Smart door lock |
CY8C6247BZI-D34 124-vfbga (9x9 mm) پن کنفیگریشن گائیڈ
CY8C6247BZI-D34 (124-vfbga (9x9 mm) پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں CY8C6247BZI-D34.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
CY8C6247BZI-D34 کے لیے موزوں ہے 6 ایپلیکیشنs: Smart Door Lock and Access Control, Bluetooth Low Energy Wearable and Sensor Node, Capacitive Sensing User Interface, Industrial Sensor Gateway, Battery-Powered Security and Personal Devices, Consumer IoT and Connected Appliance.
Smart Door Lock and Access Control
The CY8C6247BZI-D34 is the part Infineon itself designates for smart door lock designs, and its dual-core structure maps directly onto the lock's two workloads. The Cortex-M0+ core can service the keypad scan, capacitive-touch sensing, and motor drive feedback with deterministic latency, while the Cortex-M4F runs the BLE protocol stack, credential handling, and the user interface. With 1 MB of flash and 288 kB of SRAM, a bootloader, radio stack, encrypted credential store, and logging code all fit on one device without external flash. The integrated Bluetooth Low Energy radio lets the lock pair directly with a phone or gateway, avoiding a separate radio chip. Unlike a discrete MCU plus radio combination, the single-die approach shrinks the PCB area that matters most in a slim deadbolt housing and reduces the number of failure-prone solder joints.
تجویز کردہ
Bluetooth Low Energy Wearable and Sensor Node
For battery-powered BLE accessories, the CY8C6247BZI-D34 combines the radio, the two Arm cores, and the programmable analog peripherals in one package, which is exactly the mix a coin-cell sensor node needs. The Cortex-M0+ core can run a low-power always-on duty cycle for periodic sensing and radio advertisement while the Cortex-M4F wakes for heavier processing, giving a two-level power strategy on one die. The 1.7 V minimum operating voltage supports operation directly from a single lithium cell or a regulated 1.8 V rail, and the 288 kB of SRAM is sufficient for radio buffers plus local sample storage between transmissions. The programmable analog blocks let a design set up amplifiers, comparators, and ADC channels in firmware instead of populating discrete front-end components. A trade-off to plan for is the fine-pitch 124-VFBGA, which demands multilayer PCB construction and a defined assembly process rather than prototype hand-soldering.
تجویز کردہ
Capacitive Sensing User Interface
The PSoC 6 programmable peripheral fabric is what makes the CY8C6247BZI-D34 a natural fit for capacitive touch panels and slider controls. Scan timing, filter settings, and the touch-detection algorithm can be reconfigured in firmware, so a single silicon design can cover several panel geometries without respinning the board. The two cores divide the work cleanly: the Cortex-M0+ runs the deterministic touch-scan and debounce loop, and the Cortex-M4F handles the display, the BLE link, and application logic, preventing UI lag during scanning. Because the sensing front end is on-chip, a rugged industrial panel can use a single trace on the PCB rather than a separate controller board behind a glass window. For HMI products the 288 kB SRAM is also useful for a partial framebuffer or touch history buffer, and the 1 MB of flash leaves room for a bootloader that supports field firmware update over BLE.
تجویز کردہ
Industrial Sensor Gateway
The CY8C6247BZI-D34 fits industrial sensor gateways because it combines several analog inputs, a fast core, and connectivity in a single device. The programmable analog and digital peripherals can be configured to acquire thermocouple, RTD, and bridge sensor signals without a bank of external amplifiers, and the Cortex-M4F at 150 MHz has enough performance to run protocol conversion and local filtering in firmware. The Cortex-M0+ can supervise a deterministic sampling schedule and watchdog duties that should not be disturbed by higher-level application code, a separation that improves long-term field reliability. Operating from 1.7 V to 3.6 V with a -40 °C to +85 °C ambient range supports industrial cabinets and unheated enclosures with wide input rails. For connectivity, the integrated Bluetooth Low Energy radio supports short-range local configuration and commissioning, while the USB Full-Speed device port allows direct wired commissioning and log transfer.
تجویز کردہ
Battery-Powered Security and Personal Devices
Battery-operated security hardware places a hard constraint on both quiescent current and standby power, and the CY8C6247BZI-D34's dual-core split lets one core stay in a deep low-power state while the other services the radio. The Cortex-M0+ can retain a minimal event loop that wakes the Cortex-M4F only when a tamper, motion, or door event occurs, so average current stays close to the radio duty cycle rather than the active-processing load. The 1.7 V minimum supply lets the design run from a single CR2032-style cell with a boost or low-dropout front end, and the 288 kB of SRAM comfortably holds the event log and radio stack in a compact package. The BLE radio also removes the need for a separate transmitter, shrinking the enclosure and the number of EMC-sensitive nodes in a product that must pass radio emissions testing. Design consideration: the 124-VFBGA ball pitch calls for vias and multilayer boards, so plan the mechanical enclosure and PCB stack-up together.
تجویز کردہ
Consumer IoT and Connected Appliance
Connected consumer appliances need a low-cost controller that can talk to a phone, run a protocol stack, and control a small number of analog outputs, and the CY8C6247BZI-D34 covers all three without an external radio. The Bluetooth Low Energy radio handles commissioning and direct phone control, while the programmable analog blocks drive indicators, level sensing, and actuator gates. The 288 kB of SRAM supports a stack plus application buffers, and the 1 MB of flash accommodates a secure-boot image and OTA update slot for a product that ships in high volume. Because the analog peripherals are configurable in firmware, one board design can be reused across a family of SKUs by changing the peripheral configuration instead of the schematic, which shortens productization timelines. The trade-offs to evaluate are fine-pitch BGA assembly cost and the limited 3.6 V supply ceiling, which rules out direct 5 V connection and requires regulation or level shifting at the board edge.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا CY8C6247BZI-D34 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | CY8C6247BZI-D54 | CY8C6246BZI-D34 | CY8C6245BZI-D34 | CY8C6248BZI-D34 | CY8C6247LQI-D34 |
|---|---|---|---|---|---|---|
| Package | 124-VFBGA (9x9 mm) | 124-VFBGA (9x9 mm) - same | 124-VFBGA (9x9 mm) - same | 124-VFBGA (9x9 mm) - same | 124-VFBGA (9x9 mm) - same | 124-VFBGA (9x9 mm) - same |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| CPU Cores | ARM Cortex-M4F + ARM Cortex-M0+ | ARM Cortex-M4F + ARM Cortex-M0+ | ARM Cortex-M4F + ARM Cortex-M0+ | ARM Cortex-M4F + ARM Cortex-M0+ | ARM Cortex-M4F + ARM Cortex-M0+ | ARM Cortex-M4F + ARM Cortex-M0+ |
| Shipping Format | Tray | Tray | Tray | Tray | Tray | Tray |
اہم امتیازی خصوصیات
- Adds hardware cryptography without any pin or footprint change (بمقابلہCY8C6247BZI-D54)
- Flash headroom for dual-image boot and OTA field updates (بمقابلہCY8C6246BZI-D34)
- Larger SRAM budget for radio buffers and local data handling (بمقابلہCY8C6245BZI-D34)
- Complete 1 MB flash/288 kB SRAM configuration in a production tray package (بمقابلہCY8C6248BZI-D34)
ڈیزائن نوٹس
The 124-VFBGA (9x9 mm) package has a ball pitch that cannot be routed on a two-layer board. Build the PCB as a multilayer stack-up with a full fanout via field under the device, and follow the ball-map escape routing from the manufacturer datasheet rather than improvising. Keep the analog and digital ground returns separated with a single stitching point near the supply pins, and reserve the USB and radio regions for copper-free keep-out. If the ball pitch is a schedule risk for your assembly house, move the design to a larger-package member of the same PSoC 6 family early, before the PCB layout is frozen.
Plan the supply network for a 1.7 V to 3.6 V rail with dedicated decoupling close to the supply balls: place a bulk capacitor and a high-frequency ceramic capacitor at the entry point and a small ceramic at each supply ball group. Because the dual-core architecture can wake the Cortex-M4F while the Cortex-M0+ stays active, brownout behaviour must be verified for both cores, not just the active one. For single-cell Li-ion operation, remember the 3.6 V maximum - a cell at full charge sits right at the ceiling, so include margin for tolerance and transient overshoot.
Two mistakes are common on this platform. First, the JTAG device ID differs between CY8C6247BZI-D34 and CY8C6247BZI-D54, so a board built with the -D54 will not attach with the -D34 target and vice versa; re-select the device in the programming tool before debugging. Second, programming tools and bootloaders must be pointed at the correct derivative, and firmware images generally need recompiling because the crypto block changes available peripherals. Verify the flashing configuration and boot option settings in the programmer before bringing up a new board revision.
Where the integrated Bluetooth Low Energy radio is used, keep the antenna region free of copper, ground pour, and shielding metal on all layers, and follow the manufacturer's antenna clearance guidance in the layout rules. Place the decoupling and any crystal or reference components on the same side as the device to minimise loop area on the sensitive supply nets. Programmable analog blocks on this part are placed on dedicated supply domains, so keep analog routing short and away from the Cortex-M4F digital switching return paths to avoid coupling noise into the ADC front end.
Both cores clocking at 150 MHz and 100 MHz plus an active radio create a demanding emissions environment in a small enclosure. Enable spread-spectrum clocking where the design allows it to reduce narrowband peaks on the mains harmonics, and verify with pre-compliance scans before tooling. If the product is battery powered, average and peak current behaviour matters more than radiated emissions for battery life, so profile the radio duty cycle in the power budget and confirm that deep-sleep entry on the Cortex-M0+ really removes the M4F clock tree from the active power budget.
تعمیل کی معلومات
The device is a commercial/industrial temperature part (-40 °C to +85 °C) with no automotive qualification indicated, so AEC-Q100 does not apply. RoHS, REACH, lead-free and halogen-free statements were not found in the available listings; consult the Infineon product page and the material declaration for the exact ordering code.