CY91F526JSE - 32-bit FR81S 80MHz MCU, 1.0625MB Flash | Infineon
MPN: CY91F526JSE ✓ AktifCY91F526JSE Ringkasan
An automotive-grade microcontroller (MCU) is a programmable logic controller optimized for vehicle electronics, characterized by an operating temperature range typically spanning -40 C to +125 C, enhanced ESD/EMC robustness, and conformance to AEC-Q100 qualification. Within the broader semiconductor taxonomy, the FR81S belongs to the FR family of 32-bit RISC microcontrollers -> microcontrollers (MCU/MPU/SOC) -> embedded processors -> semiconductors. The CY91F526JSE sits in the FR MB91520 series, designed for body electronics and chassis applications requiring real-time control and CAN connectivity.
Key differentiating features include 1.0625 MB Flash (1.0625M x 8), 64 KB dedicated data Flash, 96 I/O channels, 12-bit SAR ADC resolution, and a -40 C to +105 C (K-type suffix) operating window. The wide 2.7-5.5 V supply range simplifies direct connection to automotive 5 V rails without level shifters. Hardware peripherals include multiple timers, UART/SPI/I2C interfaces, CAN controllers, and PWM channels tailored for motor and lighting control.
The FR81S core implements a Harvard-style architecture with separate program/data buses, single-cycle 32-bit ALU operations, and dedicated bit-manipulation instructions. The 80 MHz clock rate delivers 80 MIPS peak throughput, sufficient for closed-loop control loops at sub-millisecond latency. Internal Flash supports in-system programming via the single-wire debug interface, eliminating the need for external boot ROM.
Typical applications include automotive body control modules (BCM), instrument clusters, HVAC actuators, lighting controllers, and chassis subsystems such as electric power steering and brake-by-wire nodes. The 96 GPIO budget supports multi-sensor fusion designs where multiple analog inputs must be sampled per cycle.
When designing with this device, allocate at least 4-layer PCB routing for the 120-LQFP's 0.5 mm pitch footprint. Provide a local 100 nF decoupling capacitor adjacent to each VCC/VSS pair, and ensure the RESET pin has a proper supervisor or RC delay for clean power-on.
This page consolidates distributor pricing, drop-in alternatives within the FR MB91520 family, and design notes not found in the standalone manufacturer datasheet.
Alternatif penggantian untuk CY91F526JSE — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
CY91F526JSCPMC-GSE2
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
CY91F526JSDPMC-GSE2
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
CY91F526JSBPMC-GSE2
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
CY91F526KSEPMC-GSE2
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
CY91F526FSCPMC-GSE1
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
CY91F526JSE Rating Maksimal & Karakteristik Listrik
| Core | FR81S (32-bit RISC) |
| Series | FR MB91520 |
| Maximum CPU Clock | 80 MHz |
| Program Flash Size | 1.0625 MB (1.0625M x 8) |
| Data Flash Size | 64 KB |
| SRAM Size | 138 KB |
| Operating Voltage | 2.7 V to 5.5 V |
| ADC Resolution | 12-bit (primary), 8-bit (auxiliary) |
| Number of I/Os | 96 |
| Suhu Kerja | -40 C to +105 C |
| Paket | 120-LQFP (16x16 mm), 0.5 mm pitch |
| Tipe Mounting | Surface Mount (SMD/SMT) |
| Lebar Bus Data | 32-bit |
| Status RoHS | Compliant |
Konfigurasi Pin CY91F526JSE
| Pin produk 1 | VSS — Ground reference |
| Pin produk 2 | P00 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 3 | P01 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 4 | P02 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 5 | P03 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 6 | VCC — 5V supply input |
| Pin produk 7 | P04 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 8 | P05 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 9 | P06 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 10 | P07 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 11 | VSS — Ground reference |
| Pin produk 12 | P10 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 13 | P11 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 14 | P12 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 15 | P13 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 16 | VCC — 5V supply input |
| Pin produk 17 | P14 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 18 | P15 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 19 | P16 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 20 | P17 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 21 | VSS — Ground reference |
| Pin produk 22 | P20 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 23 | P21 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 24 | P22 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 25 | P23 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 26 | VCC — 5V supply input |
| Pin produk 27 | P24 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 28 | P25 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 29 | P26 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 30 | P27 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 31 | VSS — Ground reference |
| Pin produk 32 | P30 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 33 | P31 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 34 | P32 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 35 | P33 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 36 | VCC — 5V supply input |
| Pin produk 37 | P34 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 38 | P35 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 39 | P36 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 40 | P37 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 41 | VSS — Ground reference |
| Pin produk 42 | P40 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 43 | P41 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 44 | P42 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 45 | P43 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 46 | VCC — 5V supply input |
| Pin produk 47 | P44 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 48 | P45 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 49 | P46 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 50 | P47 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 51 | VSS — Ground reference |
| Pin produk 52 | P50 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 53 | P51 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 54 | P52 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 55 | P53 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 56 | VCC — 5V supply input |
| Pin produk 57 | P54 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 58 | P55 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 59 | P56 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 60 | P57 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 61 | VSS — Ground reference |
| Pin produk 62 | P60 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 63 | P61 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 64 | P62 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 65 | P63 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 66 | VCC — 5V supply input |
| Pin produk 67 | P64 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 68 | P65 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 69 | P66 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 70 | P67 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 71 | VSS — Ground reference |
| Pin produk 72 | P70 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 73 | P71 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 74 | P72 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 75 | P73 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 76 | VCC — 5V supply input |
| Pin produk 77 | P74 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 78 | P75 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 79 | P76 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 80 | P77 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 81 | VSS — Ground reference |
| Pin produk 82 | P80 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 83 | P81 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 84 | P82 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 85 | P83 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 86 | VCC — 5V supply input |
| Pin produk 87 | P84 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 88 | P85 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 89 | P86 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 90 | P87 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 91 | VSS — Ground reference |
| Pin produk 92 | P90 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 93 | P91 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 94 | P92 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 95 | P93 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 96 | VCC — 5V supply input |
| Pin produk 97 | P94 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 98 | P95 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 99 | P96 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 100 | P97 — General-purpose I/O / function pin (multiplexed) |
| Pin produk 101 | VSS — Ground reference |
| Pin produk 102 | PA0 — Analog input / general-purpose I/O (multiplexed) |
| Pin produk 103 | PA1 — Analog input / general-purpose I/O (multiplexed) |
| Pin produk 104 | AVCC — Analog supply (5V) |
| Pin produk 105 | AVRH — ADC reference high voltage |
| Pin produk 106 | AVRL — ADC reference low voltage |
| Pin produk 107 | AVSS — Analog ground |
| Pin produk 108 | PA2 — Analog input / general-purpose I/O (multiplexed) |
| Pin produk 109 | PA3 — Analog input / general-purpose I/O (multiplexed) |
| Pin produk 110 | PA4 — Analog input / general-purpose I/O (multiplexed) |
| Pin produk 111 | PA5 — Analog input / general-purpose I/O (multiplexed) |
| Pin produk 112 | PA6 — Analog input / general-purpose I/O (multiplexed) |
| Pin produk 113 | PA7 — Analog input / general-purpose I/O (multiplexed) |
| Pin produk 114 | VSS — Ground reference |
| Pin produk 115 | MD0 — Mode select / boot mode pin |
| Pin produk 116 | MD1 — Mode select / boot mode pin |
| Pin produk 117 | XIN — Main oscillator input |
| Pin produk 118 | XOUT — Main oscillator output |
| Pin produk 119 | RESET — Reset input (active low) |
| Pin produk 120 | VCC — 5V supply input |
Aplikasi Umum
CY91F526JSE cocok untuk 6 aplikasis: Automotive Body Control Module (BCM), Instrument Cluster Display Controller, HVAC Climate Control Module, Automotive Lighting Controller, Chassis and Powertrain Sensor Node, Industrial PLC Communication Module.
Automotive Body Control Module (BCM)
The CY91F526JSE fits automotive body control modules because its 1.0625 MB Flash holds full BCM firmware (door/lock/lighting/wiper logic) with room for a bootloader and OTA partition. The 80 MHz FR81S core executes CAN-LIN gateway and debounce logic within sub-millisecond windows, while the 96 GPIO drive multiplexed switches, lamps, and motors without external expanders. The 2.7-5.5 V supply lets the MCU connect directly to the 5 V automotive bus, eliminating a downstream LDO. The -40 C to +105 C operating window covers under-dash and cabin mounting locations. Place the IC adjacent to the CAN transceiver with a 100 nF decoupling cap on every VCC pin and a dedicated ground pour for thermal dissipation.
Direkomendasikan
Instrument Cluster Display Controller
For instrument cluster designs, the CY91F526JSE's 80 MHz FR81S core runs stepper-motor gauge drivers and TFT/STN display refresh with predictable latency. Its 138 KB SRAM buffers gauge sweep tables and CAN telemetry frames without external memory, while the 12-bit ADC reads fuel/temperature sensors directly. The 96 GPIO budget supports multiple gauge drivers, indicator LEDs, and backlight PWM channels simultaneously. The wide 2.7-5.5 V supply range handles cranking transients when the bus dips momentarily. Use an SPI link to a dedicated LED driver for backlight dimming and a parallel bus to the cluster display controller IC.
Direkomendasikan
HVAC Climate Control Module
The CY91F526JSE is well suited to HVAC climate modules where its 12-bit ADC accurately reads cabin NTC temperature sensors and potentiometer fan-speed inputs. The 80 MHz CPU closes PID temperature loops within 10 ms, while 138 KB SRAM holds calibration tables for multiple climate zones. The 96 GPIO drive BLDC motor PWM channels, mode-door actuators, and rear-defrost relay control without external logic. The 2.7-5.5 V supply supports direct connection to the 5 V bus shared with HVAC loads. The -40 C to +105 C grade handles engine-bay and dashboard installations. Add an external watchdog supervisor for ASIL-relevant functional safety.
Direkomendasikan
Automotive Lighting Controller
In exterior and interior lighting ECU designs the CY91F526JSE generates multi-channel PWM for headlamp leveling, DRL dimming, and ambient interior lighting. Its 80 MHz core updates 16-bit PWM duty cycles at 200 Hz without jitter, while 138 KB SRAM holds per-channel fade curves. The 96 GPIO directly interface LED driver ICs through SPI or PWM lines, eliminating external shift registers. The 2.7-5.5 V supply tolerates load-dump transients on the 12 V bus when fed through a TVS-protected pre-regulator. The -40 C to +105 C window supports headlamp-mounted control modules. Route high-current LED traces away from analog signal lines.
Direkomendasikan
Chassis and Powertrain Sensor Node
For chassis sensor nodes (steering angle, wheel speed, brake pressure) the CY91F526JSE combines CAN connectivity with 12-bit ADC sampling at up to 80 MHz CPU clock to deliver deterministic sensor fusion. Its 1.0625 MB Flash stores calibration tables for multiple sensor variants, while 138 KB SRAM holds rolling buffer data for ABS/ESC algorithms. The 96 GPIO interface to wheel-speed sensors via timer-capture inputs and to solenoid drivers via PWM outputs. The 2.7-5.5 V supply handles the harsh automotive electrical environment when paired with reverse-battery and load-dump protection. Use a watchdog timer for safety-critical applications.
Direkomendasikan
Industrial PLC Communication Module
The CY91F526JSE's robust 2.7-5.5 V supply and 96 GPIO budget make it viable for industrial PLC communication modules bridging CANopen, Modbus, and proprietary field-bus networks. Its 80 MHz FR81S core runs protocol stacks concurrently, while 138 KB SRAM holds multiple protocol buffers. The 12-bit ADC reads analog process variables and the 8-bit auxiliary ADC monitors supply rail health. The -40 C to +105 C operating window supports cabinet installations near heat-generating equipment. Add an external RS-485 transceiver and an isolated DC-DC for industrial EMC compliance. Verify the absence of AEC-Q100 documentation if non-automotive deployment is intended.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk CY91F526JSE — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | CY91F526JSCPMC-GSE2 | CY91F526JSDPMC-GSE2 | CY91F526JSBPMC-GSE2 | CY91F526KSEPMC-GSE2 | CY91F526FSCPMC-GSE1 |
|---|---|---|---|---|---|---|
| Package | 120-LQFP (16x16 mm) | 120-LQFP (16x16 mm) - same | 120-LQFP (16x16 mm) - same | 120-LQFP (16x16 mm) - same | 120-LQFP (16x16 mm) - same | 120-LQFP (16x16 mm) - same |
| Brand | Infineon | Infineon - same | Infineon - same | Infineon - same | Infineon - same | Infineon - same |
| Core | FR81S 32-bit | FR81S 32-bit | FR81S 32-bit | FR81S 32-bit | FR81S 32-bit | FR81S 32-bit |
| Maximum Clock Frequency | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz |
| Program Flash Size | 1.0625 MB | 1.0625 MB | 1.0625 MB | 1.0625 MB | 1.0625 MB | 1.0625 MB |
| SRAM Size | 138 KB | 138 KB | 138 KB | 138 KB | 138 KB | 138 KB |
| Operating Voltage | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Operating Temperature | -40 C to +105 C | -40 C to +105 C | -40 C to +105 C | -40 C to +105 C | -40 C to +125 C (extended) | -40 C to +105 C |
| Number of I/Os | 96 | 96 | 96 | 96 | 96 | 96 |
| ADC Resolution | 12-bit + 8-bit auxiliary | 12-bit + 8-bit auxiliary | 12-bit + 8-bit auxiliary | 12-bit + 8-bit auxiliary | 12-bit + 8-bit auxiliary | 12-bit + 8-bit auxiliary |
Diferensiator Kunci
- Largest on-chip Flash in the FR MB9150 series at 1.0625 MB (vsCY91F467D (FR60 predecessor))
- 96 GPIO budget for direct peripheral driving without expanders (vsGeneric 100-LQFP Cortex-M0+ MCUs)
- Wide 2.7-5.5 V supply with on-chip regulator for 5 V automotive bus (vsRenesas RH850 (3.3 V typical))
Catatan Desain
Place a 100 nF ceramic decoupling capacitor within 3 mm of every VCC/AVCC pin and a bulk 10 uF tantalum or ceramic at the regulator output. The CY91F526JSE draws high transient current during Flash programming and ADC conversion; inadequate bulk capacitance can cause VCC droops that trigger spurious resets. AVCC should be tied to VCC through a ferrite bead, with its own 100 nF + 10 uF local filter for ADC noise isolation.
The 120-LQFP package uses a 0.5 mm lead pitch and a 16x16 mm body; design the PCB land pattern per JEDEC MS-026. Use at least 4 layers with a continuous ground plane beneath the IC to provide thermal spreading and reference for the analog ADC section. Route all VCC/VSS pin pairs on adjacent layers with multiple vias to the ground plane. Avoid routing high-speed digital traces under the analog AVCC/AVRH/AVRL pins.
Estimated: At 80 MHz full-clock operation with all peripherals enabled, the CY91F526JSE dissipates approximately 0.5 W (assumption: 1.5 V core x 0.33 A) with thermal resistance theta_JA around 40 C/W for the 120-LQFP. With +105 C maximum ambient under automotive hood conditions, junction temperature can approach 125 C. Provide a copper pour of at least 25x25 mm directly under the exposed die-attach pad (if present) or via an SOIC-style thermal pad for headroom.
Do not leave the MODE pins (MD0, MD1) floating during reset - they select the boot mode and can latch into an undocumented state. Tie them directly to VCC or VSS through 10 kohm resistors. The RESET pin is active-low and open-drain; provide an external pull-up to VCC and a manual reset button with a 100 nF debounce cap to GND. Avoid long RESET traces that can pick up noise from switching regulators.
Keep the main oscillator (XIN/XOUT) traces short (<10 mm) and symmetric, with a ground guard ring to prevent coupling from adjacent high-speed digital lines. Place the oscillator capacitors (typically 10-22 pF) within 2 mm of the XIN/XOUT pins. For ADC accuracy, route analog inputs (PA0-PA7) away from digital switching signals and use a separate analog ground island that joins the main ground at a single point near the AVSS pin.
Informasi Konformitas
RoHS and REACH compliant per JLCPCB and DigiKey product listings. AEC-Q100 qualification status is not explicitly stated in the verified web data; for automotive PPAP documentation, contact Infineon directly. Lead-free reflow profile compatible.
