Maxim Integrated

DG384ACJ - Dual CMOS Analog Switch, 15V | Maxim Integrated

MPN: DG384ACJ ✓ Aktif
15 V Vdss 50 ohm Rds(on) 16-pin DIP Package
MOQ: 1 |

DG384ACJ Ringkasan

The Maxim Integrated DG384ACJ is a dual general-purpose CMOS analog switch designed for signal-routing applications. It is housed in a 16-pin DIP package and is associated with a maximum supply rating of 15V and an on-resistance of 50 ohms. The part combines low-power CMOS operation with a conventional dual-switch configuration, making it suitable for routing analog signals in instrumentation, test equipment, control systems, and signal-conditioning circuits.

A general-purpose CMOS analog switch is an integrated semiconductor device that connects or disconnects an analog signal path under digital control. Unlike a mechanical relay, a solid-state analog switch changes state rapidly without mechanical wear. Within the broader semiconductor hierarchy, analog switches belong to interface ICs and support the signal-path functions required by measurement, communication, industrial-control, and mixed-signal systems.

The DG384ACJ uses an integrated 16-pin DIP package and is specified as a dual analog switch with a 15V maximum voltage. A reported on-resistance of 50 ohms makes it relevant to designs where the switch resistance is acceptable relative to the input impedance and signal amplitude. The CMOS implementation also supports low-power operation when the application does not require continuously switching the analog path.

The DG384ACJ can be used to select one of two signal sources, connect an instrumentation node to a measurement circuit, or provide controlled isolation between circuit sections. Because the on-resistance contributes to channel loss and can introduce distortion with high-frequency signals, the surrounding amplifier and source impedances must be considered carefully. The device is also intended for positive supply operation, based on its 15V rating.

Typical uses include automated test equipment, data-acquisition systems, analog signal selectors, laboratory instruments, industrial controllers, and communication-interface boards. In these systems, the switch can reduce the number of external relays or mechanical contacts while providing faster operation and compact PCB placement.

Layout should keep the analog input and output traces short, provide a low-impedance return path, and place the device close to the switched node. Supply bypassing and protection should follow the circuit conditions present at each analog pin. This product page combines the documented device characteristics with practical guidance for footprint reuse, signal-path planning, procurement, and drop-in replacement assessment.

Alternatif penggantian untuk DG384ACJ — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Tidak ada alternatif pengganti yang tersedia untuk produk ini.

Permintaan Alternatif

DG384ACJ Rating Maksimal & Karakteristik Listrik

Device Type Dual general-purpose CMOS analog switch
Switch Configuration Dual analog switch
Maximum Voltage 15 V
On Resistance 50 ohm
Package Type 16-pin DIP
Jumlah Pin 16 pins
Tipe Mounting Through-hole
Technology CMOS
Signal Type Analog
Status RoHS Non-compliant

DG384ACJ 16-pin dip Diamant Konfigurasi Panduan

Konfigurasi pin untuk DG384ACJ (16-pin dip pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.

Diamant diagram pakai pakai 16-pin dip untuk DG384ACJ

Tidak ada data diatribut pin yang tersedia untuk DG384ACJ.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

DG384ACJ cocok untuk 6 aplikasis: Automated Test Equipment Signal Routing, Data Acquisition Multiplexing, Industrial Control Signal Selection, Laboratory Instrument Signal Selection, Analog Sensor Interface, Communication Interface Signal Routing.

🖥️

Automated Test Equipment Signal Routing

The DG384ACJ can route a selected analog test signal to an instrumentation channel when the source impedance is compatible with its 50-ohm on-resistance. Its dual-switch arrangement allows two measurement paths to be selected without repeatedly changing external connections. The 16-pin DIP package is useful in legacy test systems designed around through-hole analog boards. Designers should verify control polarity, switching time, and off-state isolation against the required measurement accuracy before using the switch close to the precision measurement front end.

🖥️

Data Acquisition Multiplexing

The DG384ACJ can connect one of two analog inputs to a data-acquisition front end, reducing the number of mechanical contacts in a repeated measurement system. A 50-ohm channel resistance is acceptable when the source impedance is substantially higher or when the downstream amplifier can compensate for signal loss. The design should keep the switched trace short and compare the leakage and isolation specifications with the required accuracy of the acquisition channel.

🏭

Industrial Control Signal Selection

The DG384ACJ can select between two command, feedback, or sensor lines in an industrial controller while avoiding the wear and delay of a mechanical relay. Its dual CMOS switch format and 16-pin DIP package are convenient for retrofitting through-hole control boards. Because industrial environments can experience transients and ground-potential differences, engineers should add suitable input protection, maintain a common reference where required, and verify the operating-temperature range for the selected ordering variant.

🔧

Laboratory Instrument Signal Selection

The DG384ACJ can route a calibration or test signal to the correct front-end section of a laboratory instrument while keeping the implementation compact. The 50-ohm on-resistance must be included in the overall signal-path calculation, particularly for low-amplitude sources and impedance-sensitive sensors. A low-noise grounding strategy, short analog traces, and adequate bypassing help prevent the switch and its supply network from degrading measurement precision.

🧩

Analog Sensor Interface

The DG384ACJ can switch a sensor signal between a measurement amplifier and an alternative processing path, allowing a compact interface to support more than one measurement function. Its suitability depends on source impedance, signal level, and the allowable insertion loss created by the 50-ohm on-resistance. For resistive sensors, calculate the divider ratio formed by the switch resistance and the amplifier input resistance, and confirm that control transitions do not create unacceptable settling behavior.

🌐

Communication Interface Signal Routing

The DG384ACJ can route low-frequency analog or control signals in communication-interface equipment when the circuit uses a 16-pin DIP layout. The solid-state dual switch provides a practical alternative to mechanical contactors in auxiliary signaling paths. Signal integrity must be evaluated with the actual source and termination impedances because the stated 50-ohm on-resistance can alter amplitude and edge behavior. Decoupling, grounding, and protection should be placed close to the relevant device pins.

Ringkasan Produk Direkomendasikan

DG384ACK Related DG384 family member Digunakan di dalam: Automated Test Equipment Signal Routing, Data Acquisition Multiplexing, Industrial Control Signal Selection, Laboratory Instrument Signal Selection, Analog Sensor Interface, Communication Interface Signal Routing DG384AMJ Related DG384 family member Digunakan di dalam: Automated Test Equipment Signal Routing, Data Acquisition Multiplexing, Industrial Control Signal Selection, Laboratory Instrument Signal Selection, Analog Sensor Interface, Communication Interface Signal Routing
What is the DG384ACJ?
The DG384ACJ is a dual general-purpose CMOS analog switch from Maxim Integrated, packaged in a 16-pin DIP. According to the manufacturer datasheet, it is intended for routing analog signals under digital control. The device is associated with a 15V maximum voltage and a 50-ohm on-resistance, making it suitable for moderate-impedance signal-routing and selection circuits.
What are the key specifications of DG384ACJ that engineers should know?
The DG384ACJ is a dual CMOS analog switch in a 16-pin DIP with a 15V maximum voltage and a 50-ohm on-resistance. The manufacturer datasheet identifies it as a general-purpose CMOS analog switch, while the listed package is 16-pin DIP. These characteristics place it between low-cost discrete switching arrangements and application-specific multiplexers where a simple, solid-state analog routing function is required.
What package does the DG384ACJ use?
The DG384ACJ uses a 16-pin DIP package with through-hole mounting. The 16-pin DIP footprint must be matched exactly when replacing the component on a PCB. Use the manufacturer pin-description table to assign control, supply, input, and output nets, and verify orientation from the package markings before soldering.
Where can I download the DG384ACJ datasheet PDF?
The DG384ACJ datasheet PDF can be accessed through the Maxim Integrated datasheet listing linked on this page. The document is titled for general-purpose CMOS analog switches and covers device specifications, pin descriptions, electrical characteristics, and application information. Always check the package and ordering information before treating another member of the DG384 family as a replacement.
Where can I find the DG384ACJ pinout?
The DG384ACJ pinout is presented in the manufacturer datasheet's pin-description table. Because the device uses a 16-pin DIP, inspect the pin-1 end marking before assigning the control and analog nets. The package drawing and electrical-characteristics tables should be used together to confirm signal direction, supply connections, and control polarity.
Is the DG384ACJ suitable for analog signal routing?
The DG384ACJ is suitable for general-purpose analog signal routing because it is a CMOS analog switch with a stated 50-ohm on-resistance and a 15V maximum voltage. It is most appropriate when source and load impedances permit the added channel resistance. For high-frequency, high-precision, or very low-signal-level designs, check the dynamic characteristics and off-state isolation before finalizing the selection.
Where can I buy DG384ACJ online?
Use the Request a Quote form on this page to request current DG384ACJ availability, order quantity, and commercial terms. The form is the appropriate route for quote-based or changing supply conditions. The listing is associated with a 16-pin DIP package, so include that package information and any required screening or temperature-range details in the request.
What is the price of DG384ACJ?
Current commercial terms for DG384ACJ are available through the Request a Quote form on this page. Submit the required quantity, target package, and any production or screening requirements for a responsive quotation. Because distribution status can change for older catalog components, request the current unit price rather than relying on a historical listing.
What is the lead time for DG384ACJ?
The current lead time for DG384ACJ should be requested through the Request a Quote form on this page. Include the annual and per-order quantities because availability may depend on the sourcing plan and exact package configuration. For new production, request confirmation that the supplied configuration matches the 16-pin DIP device and any required operating-temperature grade.
Is DG384ACJ in stock?
Stock status for DG384ACJ should be confirmed through the Request a Quote form on this page. Because the component is an older catalog part and can be offered through multiple sourcing channels, the confirmation should state the exact MPN, package, quantity, and expected delivery schedule. This avoids ambiguity between the base device and other DG384 family variants.
What can replace the DG384ACJ?
The best replacement is the part that matches the 16-pin DIP footprint, control logic, electrical limits, and analog performance of the DG384ACJ. A source listing that names DG384ACK establishes a related family member, but its temperature grade and ordering suffix must be checked before substitution. No unqualified drop-in replacement should be selected without comparing the manufacturer pin descriptions.
Can DG384ACK replace DG384ACJ?
DG384ACK is a related DG384-family member and may be considered when its temperature grade and ordering suffix satisfy the design requirements. Before treating it as a drop-in replacement, compare the 16-pin DIP pinout, control polarity, supply range, on-resistance, switching characteristics, and operating-temperature limits in the manufacturer datasheets.
DG384ACJ vs DG384ACK: which one should I choose?
Choose DG384ACJ when its documented operating-temperature grade matches the application; consider DG384ACK when its broader temperature range is required and all other electrical and pin-compatibility conditions are equivalent. Both are related DG384-family devices, but the ordering suffixes can indicate different environmental or temperature grades, so the suffix definition must be checked in the manufacturer documentation.
When should I choose DG384ACJ over another analog switch?
Choose DG384ACJ when the design specifically uses the 16-pin DIP footprint and can operate with a dual CMOS analog switch having a 50-ohm on-resistance and a 15V maximum voltage. Consider another device when lower resistance, higher bandwidth, lower leakage, different supply tolerance, or a smaller surface-mount package is more important than maintaining the existing through-hole PCB layout.
Is DG384ACJ RoHS compliant?
The DG384ACJ is listed as RoHS non-compliant. RoHS restricts specified hazardous substances in electrical and electronic equipment, so this status should be reviewed before using the component in new RoHS-controlled products. The manufacturer datasheet and current compliance documentation should determine whether any exemption, legacy-use treatment, or alternate part is appropriate.

Data referensi engineering untuk DG384ACJ — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the DG384ACJ when maintaining an existing 16-pin DIP PCB is more important than obtaining the lowest possible on-resistance or the smallest surface-mount footprint. Its dual general-purpose CMOS analog-switch arrangement, 15V maximum voltage, and 50-ohm on-resistance suit moderate-impedance signal-routing and selection circuits. Choose a lower-resistance or higher-bandwidth device when the switched signal is small, the source impedance is low, or settling time is critical. Choose an extended-temperature family member when the DG384ACJ grade is outside the required environmental range. Before approving any replacement, compare the complete pin assignment, control polarity, analog electrical limits, switching characteristics, and ordering suffix against the manufacturer datasheets.

Diferensiator Kunci

  • Legacy-compatible 16-pin DIP implementation (vsSurface-mount analog switch)
  • Documented 50-ohm on-resistance (vsLow-resistance precision analog switch)
  • Dual general-purpose switching (vsSingle analog switch)

Catatan Desain

Include the 50-ohm on-resistance in the complete source-to-load network calculation. It forms a divider with the source impedance and the receiver or amplifier input resistance. For low-amplitude signals, use a high-impedance amplifier and keep the routed trace short. Verify the off-state isolation and leakage requirements before using the switch near a precision measurement node.

The DG384ACJ uses a 16-pin DIP footprint, so mechanical replacement requires the same lead spacing, row spacing, and drill pattern. Confirm the package drawing and pin-1 orientation before assembly. Keep analog input and output traces away from fast digital switching nodes, and provide a continuous ground reference to reduce coupling into the switched signal.

Route supply and ground connections directly to the device with short traces and place the recommended bypass capacitor near the power pins. Keep the switched-node copper compact to minimize parasitic capacitance and susceptibility to induced noise. If any connected source can exceed the 15V maximum rating during startup or fault conditions, add suitable clamping or series resistance before the DG384ACJ pins.

Do not select a replacement solely because its family name or package count matches. Compare control polarity, analog pin assignment, supply limits, on-resistance, switching time, and operating-temperature grade. A same-family ordering suffix can change the environmental grade or qualification without changing the basic function, so each candidate must be checked against the manufacturer pin and ordering tables.

Informasi Konformitas

RoHS
Non Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The device is listed as RoHS non-compliant. No additional compliance status should be assumed without current manufacturer documentation.

Data disahkan pada: 2026-11-16 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

DG384ACJ datasheet DG384ACJ pinout DG384ACJ datasheet pdf Maxim Integrated DG384ACJ DG384ACJ 16 pin DIP DG384ACJ 50 ohm on resistance DG384ACJ 15V analog switch DG384ACJ equivalent DG384ACJ replacement DG384ACJ price DG384ACJ stock DG384ACJ vs DG384ACK

Komponen dan Istilah Terkait

Maxim Integrated DG384ACJ DG384ACK DG384AMJ dual analog switch general-purpose CMOS analog switch analog switch interface IC semiconductor signal routing on resistance 50 ohm 15V 16-pin DIP DIP package family through-hole package surface-mount package analog signal CMOS data acquisition automated test equipment industrial control laboratory instrumentation
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ