DS90LV011ATMFX - 400Mbps LVDS Driver | Texas Instruments
MPN: DS90LV011ATMFX ✓ AktifDS90LV011ATMFX Ringkasan
An LVDS driver is a specialized interface-circuit component that converts a low-voltage digital input into a balanced differential output. In the broader electronics hierarchy, it belongs to the interface IC category and supports high-speed communication between processors, FPGAs, display controllers, serializers, and test equipment. Differential signaling improves noise immunity by rejecting common-mode disturbances that can affect single-ended links.
Key characteristics include a 400-Mbps data rate, single differential output configuration, and a compact SOT-23-5 package. The DS90LV011A family is intended for systems requiring short-reach, high-speed point-to-point links. Its small footprint makes it suitable for space-constrained boards, while the differential output helps maintain signal integrity over controlled PCB traces or suitable cable interconnects.
The DS90LV011A uses a 3 V LVDS single high-speed differential driver architecture. Compared with a single-ended output, the differential arrangement uses two complementary conductors, reducing sensitivity to common-mode voltage and radiated noise. The interface should be designed around the manufacturer’s recommended terminations, controlled trace geometry, proper grounding, and a continuous reference plane.
Typical uses include high-speed backplanes, FPGA-to-FPGA links, serializer connections, display-interface links, industrial control links, and embedded communication modules. The device is particularly appropriate when the receiver supports LVDS and the link distance is short enough for the intended signaling environment.
A key design consideration is that the SOT-23-5 package requires careful layout around the differential outputs. Keep the pair of differential traces coupled, use matched length where timing margins require it, provide a solid ground reference, and place any receiver-side termination close to the receiving device. Use the Request a Quote form on this page to confirm current commercial availability, lead time, and ordering details.
Alternatif penggantian untuk DS90LV011ATMFX — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
DS90LV011ATMFX/NOPB
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
DS90LV011ATMF
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
FIN1001M5X
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
DS90LV011AQMF/NOPB
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
DS90LV011ATMFX Spesifikasi
| Product Type | LVDS differential driver |
| Laju Data | 400 Mbps |
| Differential Output Configuration | 1 single high-speed differential driver |
| Tegangan Pemuat | 3 V |
| Rentang Suhu Kerja | -40°C to +85°C |
| Paket | 5-pin SOT-23 (DBV) |
| Package Type | SOT-23-5 |
| Tipe Mounting | Surface mount |
| Logic Output | LVDS |
| Tipe Output | 1 differential driver |
| Input Compatibility | LVDS single high-speed differential signaling |
| Automotive Variant Temperature Range | -40°C to +125°C |
| Automotive Variant MPN | DS90LV011AQMF/NOPB |
DS90LV011ATMFX sot-23-5 Diamant Konfigurasi Panduan
Konfigurasi pin untuk DS90LV011ATMFX (sot-23-5 pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.
Tidak ada data diatribut pin yang tersedia untuk DS90LV011ATMFX.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
DS90LV011ATMFX cocok untuk 6 aplikasis: FPGA-to-FPGA High-Speed Link, Industrial Control and Data Acquisition, Serializer and Receiver Interconnect, Test and Measurement Instrumentation, Display and Video Control Link, Embedded Communications Module.
FPGA-to-FPGA High-Speed Link
The DS90LV011ATMFX fits a short-reach FPGA-to-FPGA connection because it provides a 400-Mbps LVDS differential output in a compact 5-pin SOT-23 package. Place the driver near the transmitting FPGA and route the differential pair over a continuous ground reference. The balanced output helps reject common-mode noise, while the small package preserves board area in dense control and processing systems. Verify FPGA LVDS I/O compatibility, output enable timing, receiver termination, and the complete propagation-delay budget before committing the interface.
Direkomendasikan
Industrial Control and Data Acquisition
For industrial control equipment, the DS90LV011ATMFX can launch a 400-Mbps LVDS link between a controller and an external data-acquisition or communications module. Differential signaling improves immunity to common-mode disturbances found near motors, relays, and switching power stages. Its -40°C to +85°C operating range supports many industrial environments, while the SOT-23-5 footprint simplifies compact acquisition boards. The layout must preserve a continuous return path and isolate noisy power or motor-current routing from the low-amplitude differential channel.
Direkomendasikan
Serializer and Receiver Interconnect
The DS90LV011ATMFX is suitable for point-to-point links from serializers, retimers, display controllers, and other high-speed interface blocks. At 400 Mbps, controlled PCB geometry is essential because discontinuities and unequal routing can increase reflections and timing uncertainty. Use closely spaced differential traces, minimize layer transitions and stubs, and place the receiver termination according to the receiver implementation. The five-pin package also allows the transmitter to be positioned close to a connector or mezzanine interface where trace length must remain short.
Direkomendasikan
Test and Measurement Instrumentation
Instrumentation systems can use the DS90LV011ATMFX to drive a short LVDS connection into a high-speed capture, pattern-generation, or analysis block. The 400-Mbps rate provides useful margin for transferring compact control and data packets, and differential signaling reduces sensitivity to common-mode noise within the instrument. Place the driver adjacent to the receiver or connector, maintain a low-impedance ground reference, and apply the receiver’s specified termination. This arrangement helps keep edge distortion and radiated emissions under control in compact bench instruments.
Direkomendasikan
Display and Video Control Link
The DS90LV011ATMFX can support a short, point-to-point differential link between a display controller and an LVDS-capable downstream device when the required data rate does not exceed 400 Mbps. The differential output reduces susceptibility to ground-offset and common-mode noise, while the compact package suits space-constrained control boards. The implementation should use the system’s intended LVDS termination, controlled trace coupling, and a continuous reference plane. Confirm the display interface’s electrical standard and timing requirements rather than treating every differential link as interchangeable.
Direkomendasikan
Embedded Communications Module
Embedded communications equipment can use the DS90LV011ATMFX as the outbound differential driver for a short high-speed link between a processor subsystem and a communications engine. The 5-pin SOT-23 package minimizes PCB footprint, and the 400-Mbps capability supports moderately fast data transfer over controlled interconnects. Because the channel is unidirectional in this configuration, the receiver and termination must be located at the opposite endpoint. Route away from antenna feed regions, switching inductors, and high-current return paths to preserve signal integrity.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk DS90LV011ATMFX — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | DS90LV011ATMFX/NOPB | DS90LV011ATMF | FIN1001M5X | DS90LV011AQMF/NOPB |
|---|---|---|---|---|---|
| Package | 5-pin SOT-23 (DBV) | 5-pin SOT-23 (DBV) | 5-pin SOT-23 | 5-pin SOT-23 | 5-pin SOT-23 (DBV) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Microchip Technology | Texas Instruments |
| Cross-Reference Basis | Original device | Related ordering configuration | Described as completely replaceable without circuit modification | Listed as a direct substitute | Automotive-temperature family variant |
Diferensiator Kunci
- Direct same-family ordering option (vsDS90LV011ATMFX/NOPB)
- Automotive-temperature option extends the operating range (vsDS90LV011AQMF/NOPB)
- Cross-brand sourcing option in the same footprint (vsFIN1001M5X)
- Pin-compatible family configuration (vsDS90LV011ATMF)
Catatan Desain
Route the LVDS differential pair as a tightly coupled impedance-controlled trace over a continuous ground plane. Minimize vias, stubs, and test-pad discontinuities because they can create reflections that degrade the 400-Mbps edge. Keep the driver close to the transmitting device and avoid sharing reference paths with switching power nodes, motor returns, or high-current relay wiring.
Confirm the receiver architecture and place its LVDS termination at the receiver end of the link rather than duplicating termination near the driver. Use the manufacturer’s recommended differential impedance and output network. If the PCB length is long, the connector, cable, and receiver parasitics must be included in channel validation instead of assuming that a logic-level waveform remains valid at the far endpoint.
The SOT-23-5 body leaves limited clearance between pins, so assign the differential pair to adjacent signal pins and provide adequate escape routing before any fanout. Preserve ground continuity beneath the part, place bypass capacitance near the supply connection according to the family guidance, and review solder-mask spacing and assembly requirements for the small-pitch package.
Treat the differential pair as a controlled-impedance signal rather than two independent nets. Avoid adding large test pads or long breakout branches on either output conductor, and keep switching regulators and their high-current loops away from the channel. Adequate return-path continuity reduces radiated emissions and improves immunity to common-mode voltage present in industrial environments.
Informasi Konformitas
The related DS90LV011AQMF/NOPB configuration is identified as automotive, while the standard DS90LV011ATMFX listing is not identified as AEC-Q100 qualified. Detailed compliance declarations should be confirmed through the manufacturer product page and the Request a Quote form.