Texas Instruments

DS90LV011ATMFX - 400Mbps LVDS Driver | Texas Instruments

MPN: DS90LV011ATMFX ✓ פעיל
3 V Vdss 5-pin SOT-23 (DBV) Package
כמות הזמנה מינימלית: 1 |

DS90LV011ATMFX סקירה

Texas Instruments DS90LV011ATMFX is a 400-Mbps LVDS single high-speed differential driver packaged in a 5-pin SOT-23 (DBV) package. It is designed for point-to-point, low-voltage differential signaling over balanced interconnects, where a small package, high data rate, and robust differential output are important. The device supports a -40°C to +85°C operating temperature range according to the manufacturer product listing, and the related automotive-qualified variant extends the range to +125°C.

An LVDS driver is a specialized interface-circuit component that converts a low-voltage digital input into a balanced differential output. In the broader electronics hierarchy, it belongs to the interface IC category and supports high-speed communication between processors, FPGAs, display controllers, serializers, and test equipment. Differential signaling improves noise immunity by rejecting common-mode disturbances that can affect single-ended links.

Key characteristics include a 400-Mbps data rate, single differential output configuration, and a compact SOT-23-5 package. The DS90LV011A family is intended for systems requiring short-reach, high-speed point-to-point links. Its small footprint makes it suitable for space-constrained boards, while the differential output helps maintain signal integrity over controlled PCB traces or suitable cable interconnects.

The DS90LV011A uses a 3 V LVDS single high-speed differential driver architecture. Compared with a single-ended output, the differential arrangement uses two complementary conductors, reducing sensitivity to common-mode voltage and radiated noise. The interface should be designed around the manufacturer’s recommended terminations, controlled trace geometry, proper grounding, and a continuous reference plane.

Typical uses include high-speed backplanes, FPGA-to-FPGA links, serializer connections, display-interface links, industrial control links, and embedded communication modules. The device is particularly appropriate when the receiver supports LVDS and the link distance is short enough for the intended signaling environment.

A key design consideration is that the SOT-23-5 package requires careful layout around the differential outputs. Keep the pair of differential traces coupled, use matched length where timing margins require it, provide a solid ground reference, and place any receiver-side termination close to the receiving device. Use the Request a Quote form on this page to confirm current commercial availability, lead time, and ordering details.

חלופות תחליף ישיר עבור DS90LV011ATMFX — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

DS90LV011ATMFX/NOPB

✅ Drop-In
📦 5-pin SOT-23 (DBV)
Same 400-Mbps LVDS driver and 5-pin SOT-23 package; ordering-code marking differs by 0% in the stated key ratings.

📋 חלופה להתייחסות (לא בקטלוג)

DS90LV011ATMF

✅ Drop-In
📦 5-pin SOT-23 (DBV)
Same 400-Mbps LVDS driver and pin-compatible 5-pin SOT-23 package; key performance characteristics are stated as consistent, with a 0% difference.

📋 חלופה להתייחסות (לא בקטלוג)

FIN1001M5X

✅ Drop-In
📦 5-pin SOT-23
Cross-brand LVDS substitute in the same 5-pin package; the listed key rating is 100% while electrical details require verification.

📋 חלופה להתייחסות (לא בקטלוג)

DS90LV011AQMF/NOPB

✅ Drop-In
📦 5-pin SOT-23 (DBV)
Same 400-Mbps LVDS driver family and package, with the automotive temperature range increasing from +85°C to +125°C.

📋 חלופה להתייחסות (לא בקטלוג)

DS90LV011ATMFX מפרטים

Product Type LVDS differential driver
קצב נתונים 400 Mbps
Differential Output Configuration 1 single high-speed differential driver
מתח אספקה 3 V
טווח טמפרטורת פעולה -40°C to +85°C
מארז 5-pin SOT-23 (DBV)
Package Type SOT-23-5
סוג הרכבה Surface mount
Logic Output LVDS
סוג פלט 1 differential driver
Input Compatibility LVDS single high-speed differential signaling
Automotive Variant Temperature Range -40°C to +125°C
Automotive Variant MPN DS90LV011AQMF/NOPB

מדריך תצורת פינים של DS90LV011ATMFX sot-23-5

תצורת פינים עבור DS90LV011ATMFX (מארזת sot-23-5). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת sot-23-5 עבור DS90LV011ATMFX

אין נתוני פריסת פינים מפורטים עבור DS90LV011ATMFX.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

DS90LV011ATMFX מתאים עבור 6 יישוםs: FPGA-to-FPGA High-Speed Link, Industrial Control and Data Acquisition, Serializer and Receiver Interconnect, Test and Measurement Instrumentation, Display and Video Control Link, Embedded Communications Module.

🖥️

FPGA-to-FPGA High-Speed Link

The DS90LV011ATMFX fits a short-reach FPGA-to-FPGA connection because it provides a 400-Mbps LVDS differential output in a compact 5-pin SOT-23 package. Place the driver near the transmitting FPGA and route the differential pair over a continuous ground reference. The balanced output helps reject common-mode noise, while the small package preserves board area in dense control and processing systems. Verify FPGA LVDS I/O compatibility, output enable timing, receiver termination, and the complete propagation-delay budget before committing the interface.

🏭

Industrial Control and Data Acquisition

For industrial control equipment, the DS90LV011ATMFX can launch a 400-Mbps LVDS link between a controller and an external data-acquisition or communications module. Differential signaling improves immunity to common-mode disturbances found near motors, relays, and switching power stages. Its -40°C to +85°C operating range supports many industrial environments, while the SOT-23-5 footprint simplifies compact acquisition boards. The layout must preserve a continuous return path and isolate noisy power or motor-current routing from the low-amplitude differential channel.

🌐

Serializer and Receiver Interconnect

The DS90LV011ATMFX is suitable for point-to-point links from serializers, retimers, display controllers, and other high-speed interface blocks. At 400 Mbps, controlled PCB geometry is essential because discontinuities and unequal routing can increase reflections and timing uncertainty. Use closely spaced differential traces, minimize layer transitions and stubs, and place the receiver termination according to the receiver implementation. The five-pin package also allows the transmitter to be positioned close to a connector or mezzanine interface where trace length must remain short.

🔧

Test and Measurement Instrumentation

Instrumentation systems can use the DS90LV011ATMFX to drive a short LVDS connection into a high-speed capture, pattern-generation, or analysis block. The 400-Mbps rate provides useful margin for transferring compact control and data packets, and differential signaling reduces sensitivity to common-mode noise within the instrument. Place the driver adjacent to the receiver or connector, maintain a low-impedance ground reference, and apply the receiver’s specified termination. This arrangement helps keep edge distortion and radiated emissions under control in compact bench instruments.

📺

Display and Video Control Link

The DS90LV011ATMFX can support a short, point-to-point differential link between a display controller and an LVDS-capable downstream device when the required data rate does not exceed 400 Mbps. The differential output reduces susceptibility to ground-offset and common-mode noise, while the compact package suits space-constrained control boards. The implementation should use the system’s intended LVDS termination, controlled trace coupling, and a continuous reference plane. Confirm the display interface’s electrical standard and timing requirements rather than treating every differential link as interchangeable.

📱

Embedded Communications Module

Embedded communications equipment can use the DS90LV011ATMFX as the outbound differential driver for a short high-speed link between a processor subsystem and a communications engine. The 5-pin SOT-23 package minimizes PCB footprint, and the 400-Mbps capability supports moderately fast data transfer over controlled interconnects. Because the channel is unidirectional in this configuration, the receiver and termination must be located at the opposite endpoint. Route away from antenna feed regions, switching inductors, and high-current return paths to preserve signal integrity.

What is the DS90LV011ATMFX?
The DS90LV011ATMFX is a Texas Instruments 400-Mbps LVDS single high-speed differential driver in a 5-pin SOT-23 (DBV) package. According to the manufacturer product page, the DS90LV011A family provides one differential driver for point-to-point links and is intended for high-speed low-voltage differential signaling. Its compact SOT-23-5 footprint makes it useful where board space is limited.
What is the operating temperature range of DS90LV011ATMFX?
The DS90LV011ATMFX operates from -40°C to +85°C. The manufacturer ordering information identifies the related DS90LV011ATMFX/NOPB configuration as a 5-pin SOT-23 device rated for that range. For higher-temperature requirements, the DS90LV011AQMF/NOPB automotive variant is listed for -40°C to +125°C, but it should not be selected without checking the complete ordering details.
Where can I find the DS90LV011ATMFX datasheet and pinout?
The official DS90LV011A product page is the primary starting point for the DS90LV011ATMFX datasheet and ordering information. It identifies the device as a 400-Mbps LVDS single high-speed differential driver and links to the family documentation. The verified distributor listings also describe the package as 5-pin SOT-23. Use the manufacturer pin-description table when assigning PCB nets.
Is DS90LV011ATMFX still available?
The manufacturer maintains a product page for DS90LV011A and the verified distributor listings include active purchasing pages for DS90LV011ATMFX and DS90LV011ATMFX/NOPB. Availability and delivery schedules can change by package configuration and order volume. Request a Quote on this page for current stock confirmation, minimum order quantity, and lead time.
What is the price of DS90LV011ATMFX?
The current commercial price is not stated on this product page, and pricing changes with quantity, package marking, and order timing. Use the Request a Quote form on this page to request current pricing for the exact DS90LV011ATMFX configuration, including required quantities, delivery location, and production schedule.
What is the lead time for DS90LV011ATMFX?
The current lead time for DS90LV011ATMFX is not established by the manufacturer search result and should be confirmed before committing a production schedule. Submit the exact MPN, quantity, and required delivery date through the Request a Quote form on this page. The quote response should also identify whether the order will use the standard MPN or the related /NOPB ordering configuration.
Is DS90LV011ATMFX in stock?
The verified distributor pages show purchasing links for DS90LV011ATMFX, but a dependable inventory quantity must be confirmed for the requested package and marking. Use the Request a Quote form on this page to check current stock and lead time. Include the shipment destination and planned quantity so the response reflects the correct commercial configuration.
What can replace DS90LV011ATMFX?
DS90LV011ATMFX/NOPB is the closest same-family ordering alternative because it retains the 400-Mbps LVDS driver function and 5-pin SOT-23 package. FIN1001M5X is identified in the cross-reference material as a direct substitute, while DS90LV011ATMF is described as functionally and pin compatible. Verify the complete electrical ratings, pin functions, marking, and lifecycle requirements before substitution.
What is the best drop-in replacement for DS90LV011ATMFX?
DS90LV011ATMFX/NOPB is the most direct same-manufacturer replacement for the DS90LV011ATMFX because it is listed as the same 400-Mbps LVDS driver in a 5-pin SOT-23 package. DS90LV011ATMF is also described as completely replaceable without circuit modification. A cross-brand substitute such as FIN1001M5X should be accepted only after checking its complete pinout and electrical specifications.
Is DS90LV011ATMFX the same as DS90LV011ATMF?
DS90LV011ATMFX and DS90LV011ATMF are described in the comparison information as functionally and pin compatible in 5-pin SOT-23 packages, with replacement possible without modifying the existing circuit. The exact ordering codes can still differ in marking, temperature grade, or packaging configuration. Confirm the manufacturer ordering information and customer requirements before substitution.
DS90LV011ATMFX vs DS90LV012ATMFX - which is better for an LVDS link?
DS90LV011ATMFX is identified as a single 400-Mbps LVDS high-speed differential driver, while DS90LV012ATMFX belongs to a different DS90LV012A family option whose receiver/driver configuration must be checked separately. They should not be treated as interchangeable merely because both appear in similar comparison searches. Select by required channel direction, data rate, pinout, supply voltage, and termination architecture.
When should I choose DS90LV011ATMFX over a cross-brand substitute?
Choose DS90LV011ATMFX when source continuity with the TI DS90LV011A family, a known 400-Mbps rating, and a confirmed 5-pin SOT-23 footprint are priorities. A cross-brand substitute may be appropriate when sourcing continuity requires it, but it introduces the need to independently verify compatibility. The cross-reference material identifies FIN1001M5X as a direct substitute; final approval should cover pin mapping, voltage levels, propagation delay, output current, and temperature range.
Is DS90LV011ATMFX suitable for FPGA-to-FPGA communication?
The DS90LV011ATMFX is suitable for a short-reach FPGA-to-FPGA link when the receiving device accepts LVDS and the design can control differential routing and termination. Its 400-Mbps data rate and 5-pin SOT-23 package suit compact point-to-point channels. The transmitter should be configured for the FPGA’s LVDS-compatible output standard, with trace geometry and receiver termination implemented according to the family documentation.
How should DS90LV011ATMFX be laid out on a PCB?
Route the differential outputs as a tightly coupled pair over a continuous ground reference and minimize vias and stubs. Keep any receiver termination close to the receiving device, and observe the differential impedance required by the interconnect. The small SOT-23-5 footprint provides little routing space, so component placement, return-path continuity, and ground-plane integrity deserve early PCB review.
What are the key specifications of DS90LV011ATMFX that engineers should know?
The key specifications are a 400-Mbps maximum signaling rate, one LVDS differential driver, a 3 V supply class, a 5-pin SOT-23 (DBV) package, and a -40°C to +85°C operating range. The manufacturer product page describes the DS90LV011A as a 400-Mbps LVDS single high-speed differential driver. Detailed output voltage, propagation delay, current limits, and termination values must be taken from the manufacturer datasheet.

נתוני עזר הנדסיים עבור DS90LV011ATMFX — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose DS90LV011ATMFX when designing a 3 V, 400-Mbps LVDS point-to-point link and you prefer the Texas Instruments DS90LV011A family with its 5-pin SOT-23 footprint and -40°C to +85°C range. DS90LV011ATMFX/NOPB is the natural same-family choice when its ordering designation better matches production requirements. DS90LV011AQMF/NOPB is preferable when the design requires automotive classification and operation to +125°C. FIN1001M5X can provide a cross-brand sourcing path in the same five-pin package, but approve it only after comparing pin functions, supply voltage, propagation delay, output levels, and temperature limits. DS90LV011ATMF is also described as a complete functional and pin-compatible replacement. For any substitute, preserve the original differential trace geometry and revalidate receiver termination, timing, EMI behavior, and production markings.

השוואה עם חלופות

פרמטר מוצר זה DS90LV011ATMFX/NOPB DS90LV011ATMF FIN1001M5X DS90LV011AQMF/NOPB
Package 5-pin SOT-23 (DBV) 5-pin SOT-23 (DBV) 5-pin SOT-23 5-pin SOT-23 5-pin SOT-23 (DBV)
Brand Texas Instruments Texas Instruments Texas Instruments Microchip Technology Texas Instruments
Cross-Reference Basis Original device Related ordering configuration Described as completely replaceable without circuit modification Listed as a direct substitute Automotive-temperature family variant

מבדילים עיקריים

  • Direct same-family ordering option (לעומתDS90LV011ATMFX/NOPB)
  • Automotive-temperature option extends the operating range (לעומתDS90LV011AQMF/NOPB)
  • Cross-brand sourcing option in the same footprint (לעומתFIN1001M5X)
  • Pin-compatible family configuration (לעומתDS90LV011ATMF)

הערות תכנון

Route the LVDS differential pair as a tightly coupled impedance-controlled trace over a continuous ground plane. Minimize vias, stubs, and test-pad discontinuities because they can create reflections that degrade the 400-Mbps edge. Keep the driver close to the transmitting device and avoid sharing reference paths with switching power nodes, motor returns, or high-current relay wiring.

Confirm the receiver architecture and place its LVDS termination at the receiver end of the link rather than duplicating termination near the driver. Use the manufacturer’s recommended differential impedance and output network. If the PCB length is long, the connector, cable, and receiver parasitics must be included in channel validation instead of assuming that a logic-level waveform remains valid at the far endpoint.

The SOT-23-5 body leaves limited clearance between pins, so assign the differential pair to adjacent signal pins and provide adequate escape routing before any fanout. Preserve ground continuity beneath the part, place bypass capacitance near the supply connection according to the family guidance, and review solder-mask spacing and assembly requirements for the small-pitch package.

Treat the differential pair as a controlled-impedance signal rather than two independent nets. Avoid adding large test pads or long breakout branches on either output conductor, and keep switching regulators and their high-current loops away from the channel. Adequate return-path continuity reduces radiated emissions and improves immunity to common-mode voltage present in industrial environments.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The related DS90LV011AQMF/NOPB configuration is identified as automotive, while the standard DS90LV011ATMFX listing is not identified as AEC-Q100 qualified. Detailed compliance declarations should be confirmed through the manufacturer product page and the Request a Quote form.

הנתונים אומתו בתאריך: 2026-11-16 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

ds90lv011atmfx nopb DS90LV011ATMFX datasheet DS90LV011ATMFX datasheet pdf DS90LV011ATMFX pinout DS90LV011ATMFX equivalent DS90LV011ATMFX replacement DS90LV011ATMFX cross reference DS90LV011ATMFX footprint DS90LV011ATMFX price DS90LV011ATMFX stock Texas Instruments DS90LV011ATMFX DS90LV011ATMFX vs DS90LV011ATMF DS90LV011A 400Mbps LVDS driver DS90LV011A SOT-23-5 application

רכיבים ומונחים קשורים

Texas Instruments DS90LV011ATMFX DS90LV011A DS90LV011ATMFX/NOPB DS90LV011ATMF DS90LV011AQMF/NOPB FIN1001M5X Microchip Technology LVDS low-voltage differential signaling differential driver interface IC semiconductor 400 Mbps 3 V SOT-23-5 DBV package surface mount FPGA industrial control data acquisition signal integrity differential impedance receiver termination common-mode noise rejection
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר