DSPIC30F6015T-30I/PT - dsPIC30F 30 MIPS 144KB Flash DSC | Microchip
MPN: DSPIC30F6015T-30I/PT ✓ AktifDSPIC30F6015T-30I/PT Ringkasan
A Digital Signal Controller is a hybrid device that combines a microcontroller (MCU) with a Digital Signal Processor (DSP) engine on a single chip. DsPIC28s and dsPIC30s sit in the taxonomy DSC -> 16-bit MCU -> embedded controller -> semiconductor; the dsPIC30F family in particular targets high-performance motor control and power conversion where deterministic execution and DSP-class math (MAC, barrel shifter) coexist with classic MCU peripherals. The DSP engine executes one MAC per instruction, allowing closed-loop field-oriented control (FOC) of three-phase motors at the 30 MIPS throughput offered here.
Key features include a 16-bit modified Harvard architecture with single-cycle 16x16-bit MAC, an integrated 16-channel 10-bit ADC with 200 ksps conversion rate, an 8-channel 16-bit Motor Control PWM module, two CAN 2.0 modules, two UART modules, one SPI, and one I2C interface. The device supports 5V/3.3V operation across a 2.5V to 5.5V Vdd range, 41 interrupt sources with 4-cycle latency, and a 16-bit-wide data path. The dsPIC30F6015 also integrates a real-time clock (RTC), a watchdog timer, and three 16-bit timer/counters.
Typical applications include three-phase AC induction motor control, BLDC and PMSM servo drives, switched-mode power supplies (SMPS), uninterruptible power supplies (UPS), and power factor correction (PFC) stages. The 64-pin TQFP package provides ample I/O for three-phase gate drivers, current-sensing ADCs, encoder feedback, and CAN-based industrial networking.
When designing with this part, reserve one full PWM period per control loop and budget the ADC sampling window within the PWM reload boundary. Designers migrating to newer platforms should evaluate the dsPIC33F or PIC24 successors for longer lifecycle support.
Alternatif penggantian untuk DSPIC30F6015T-30I/PT — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian DSPIC30F6015T-30I/PT (sama faktor bentuk dan footprint) — berbeda di dalam ADC, Package, Operating Temperature, Core Architecture, Timers.
DSPIC30F6015-30I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →DSPIC30F6014AT-20E/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →DSPIC30F6014A-30I/PF
✅ Drop-InKontak untuk harga
Lihat Datasheet →DSPIC30F6014A-20E/PF
✅ Drop-InKontak untuk harga
Lihat Datasheet →DSPIC30F6013AT-20E/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →DSPIC30F6013A-30I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →DSPIC30F6015T-30I/PT Rating Maksimal & Karakteristik Listrik
| Core | dsPIC30F 16-bit DSC |
| CPU Speed | 30 MIPS at 30 MHz |
| Program Memory (Flash) | 144 KB (48K x 24) |
| Data RAM | 8 KB (4K x 16) |
| Data EEPROM | 4 KB |
| Operating Voltage (Vdd) | 2.5 V to 5.5 V |
| Suhu Kerja | -40 C to +85 C (industrial, "I" suffix) |
| ADC | 16-channel, 10-bit, 200 ksps |
| PWM | 8-channel, 16-bit Motor Control PWM |
| CAN | 2 x CAN 2.0 modules |
| UART | 2 x UART modules |
| SPI | 1 x SPI module |
| I2C | 1 x I2C module |
| Timers | 3 x 16-bit timer/counters |
| Paket | 64-pin TQFP (10x10 mm), "PT" |
| Tipe Mounting | Surface Mount |
| Level MSL | 3 |
| Status RoHS | Compliant |
Konfigurasi Pin DSPIC30F6015T-30I/PT
| Pin produk 1 | AN0/RB0 — Analog input 0 / Port B bit 0 |
| Pin produk 2 | AN1/RB1 — Analog input 1 / Port B bit 1 |
| Pin produk 3 | AN2/RB2 — Analog input 2 / Port B bit 2 |
| Pin produk 4 | AN3/RB3 — Analog input 3 / Port B bit 3 |
| Pin produk 5 | AN4/RB4 — Analog input 4 / Port B bit 4 |
| Pin produk 6 | AN5/RB5 — Analog input 5 / Port B bit 5 |
| Pin produk 7 | Vss — Ground |
| Pin produk 8 | OSC1/CLKI — Crystal oscillator input / external clock |
| Pin produk 9 | OSC2/CLKO — Crystal oscillator output |
| Pin produk 10 | MCLR — Master Clear (reset, active-low) |
| Pin produk 11 | Vdd — Digital supply voltage (2.5 V to 5.5 V) |
| Pin produk 12 | PWM1L/RE0 — PWM1 low-side output / Port E bit 0 |
| Pin produk 13 | PWM1H/RE1 — PWM1 high-side output / Port E bit 1 |
| Pin produk 14 | PWM2L/RE2 — PWM2 low-side output / Port E bit 2 |
| Pin produk 15 | PWM2H/RE3 — PWM2 high-side output / Port E bit 3 |
| Pin produk 16 | PWM3L/RE4 — PWM3 low-side output / Port E bit 4 |
| Pin produk 17 | PWM3H/RE5 — PWM3 high-side output / Port E bit 5 |
| Pin produk 18 | PWM4L/RG0 — PWM4 low-side output / Port G bit 0 |
| Pin produk 19 | PWM4H/RG1 — PWM4 high-side output / Port G bit 1 |
| Pin produk 20 | RG2 — Port G bit 2 |
| Pin produk 21 | RG3 — Port G bit 3 |
| Pin produk 22 | RF0 — Port F bit 0 |
| Pin produk 23 | RF1 — Port F bit 1 |
| Pin produk 24 | RF2 — Port F bit 2 |
| Pin produk 25 | RF3 — Port F bit 3 |
| Pin produk 26 | RF4 — Port F bit 4 |
| Pin produk 27 | RF5 — Port F bit 5 |
| Pin produk 28 | RF6 — Port F bit 6 |
| Pin produk 29 | RF7 — Port F bit 7 |
| Pin produk 30 | AVss — Analog ground |
| Pin produk 31 | AVdd — Analog supply voltage (2.5 V to 5.5 V) |
| Pin produk 32 | AN6/RD7 — Analog input 6 / Port D bit 7 |
| Pin produk 33 | AN7/RD6 — Analog input 7 / Port D bit 6 |
| Pin produk 34 | AN8/RD5 — Analog input 8 / Port D bit 5 |
| Pin produk 35 | AN9/RD4 — Analog input 9 / Port D bit 4 |
| Pin produk 36 | AN10/RD3 — Analog input 10 / Port D bit 3 |
| Pin produk 37 | AN11/RD2 — Analog input 11 / Port D bit 2 |
| Pin produk 38 | AN12/RD1 — Analog input 12 / Port D bit 1 |
| Pin produk 39 | AN13/RD0 — Analog input 13 / Port D bit 0 |
| Pin produk 40 | AN14/RC1 — Analog input 14 / Port C bit 1 |
| Pin produk 41 | AN15/RC2 — Analog input 15 / Port C bit 2 |
| Pin produk 42 | RC3 — Port C bit 3 |
| Pin produk 43 | RC4 — Port C bit 4 |
| Pin produk 44 | INT0/RC5 — External interrupt 0 / Port C bit 5 |
| Pin produk 45 | INT1/RC7 — External interrupt 1 / Port C bit 7 |
| Pin produk 46 | INT2/RC8 — External interrupt 2 / Port C bit 8 |
| Pin produk 47 | INT3/RC9 — External interrupt 3 / Port C bit 9 |
| Pin produk 48 | C1RX/RC6 — CAN1 RX / Port C bit 6 |
| Pin produk 49 | C1TX/RA9 — CAN1 TX / Port A bit 9 |
| Pin produk 50 | C2RX/RF8 — CAN2 RX / Port F bit 8 |
| Pin produk 51 | C2TX/RF9 — CAN2 TX / Port F bit 9 |
| Pin produk 52 | U1RX/RA0 — UART1 RX / Port A bit 0 |
| Pin produk 53 | U1TX/RA1 — UART1 TX / Port A bit 1 |
| Pin produk 54 | U2RX/RA2 — UART2 RX / Port A bit 2 |
| Pin produk 55 | U2TX/RA3 — UART2 TX / Port A bit 3 |
| Pin produk 56 | SDO1/RB6 — SPI1 data out / Port B bit 6 |
| Pin produk 57 | SDI1/RB7 — SPI1 data in / Port B bit 7 |
| Pin produk 58 | SCK1/RB8 — SPI1 clock / Port B bit 8 |
| Pin produk 59 | SDA1/RB9 — I2C1 data / Port B bit 9 |
| Pin produk 60 | SCL1/RB10 — I2C1 clock / Port B bit 10 |
| Pin produk 61 | PGED1/RB11 — ICSP programming data / Port B bit 11 |
| Pin produk 62 | PGEC1/RB12 — ICSP programming clock / Port B bit 12 |
| Pin produk 63 | Vss — Ground |
| Pin produk 64 | Vdd — Digital supply voltage (2.5 V to 5.5 V) |
Aplikasi Umum
DSPIC30F6015T-30I/PT cocok untuk 6 aplikasis: Three-Phase PMSM / BLDC Motor Control, Switched-Mode Power Supply (SMPS) Digital Control, Uninterruptible Power Supply (UPS) Control, Power Factor Correction (PFC) Stage, Industrial CAN-Connected Sensor Hub, Automotive Sensor and Actuator Module.
Three-Phase PMSM / BLDC Motor Control
The DSPIC30F6015T-30I/PT is purpose-built for three-phase permanent-magnet and brushless DC motor control, where its 30 MIPS DSP engine executes one 16x16-bit MAC per cycle for field-oriented control (FOC). The integrated 8-channel 16-bit Motor Control PWM module delivers complementary outputs with programmable dead-time insertion on three phase pairs, perfectly matching a three-phase IGBT/MOSFET gate-driver stage. The 16-channel 10-bit 200 ksps ADC simultaneously samples phase currents (via shunt resistors or Hall-effect sensors) and DC-bus voltage within a single PWM period, while the quadrature encoder interface tracks rotor position for sensorless or sensored commutation. This combination - MAC throughput, motor-tuned PWM, and synchronized ADC - removes the need for an external DSP, simplifying inverter designs for industrial servo drives, e-bikes, and robotics.
Direkomendasikan
Switched-Mode Power Supply (SMPS) Digital Control
In digitally controlled SMPS designs, the DSPIC30F6015T-30I/PT closes the feedback loop around a PFC or DC-DC stage by combining fast ADC sampling with deterministic PWM updates. Its 30 MIPS throughput and single-cycle MAC allow Type-II and Type-III compensator coefficients to be evaluated at each switching cycle, while the 16-bit PWM module supports duty-cycle resolution down to 7.5 ns at 30 MHz peripheral clock. The dual CAN 2.0 modules enable telemetry and remote firmware update in industrial UPS systems, and the 144 KB Flash stores complex multi-loop firmware with adaptive dead-time control. Engineers use this DSC for PFC stages, telecom rectifiers, and solar inverters where DSP-grade math meets MCU-grade simplicity in a single chip.
Direkomendasikan
Uninterruptible Power Supply (UPS) Control
The DSPIC30F6015T-30I/PT suits online double-conversion UPS designs where a single DSC must orchestrate PFC rectification, battery charging, and inverter output regulation. Its two CAN 2.0 controllers allow redundant communication channels for monitoring UPS status to a system controller, while two UART modules support RS-232/RS-485 service ports and battery-management telemetry. The 144 KB Flash accommodates full DSP firmware plus bootloader and IEC-62040-31 status tables, and the 4 KB EEPROM stores calibration constants without external memory. The industrial -40C to +85C temperature grade meets the harsh thermal environment inside a server-room UPS cabinet.
Direkomendasikan
Power Factor Correction (PFC) Stage
Digital PFC stages benefit from the DSPIC30F6015T-30I/PT's deterministic 30 MIPS DSP pipeline, which performs average-current-mode control at switching frequencies up to 100 kHz. The 16-channel 10-bit ADC measures input voltage, input current, and output DC-bus voltage simultaneously, while the 16-bit PWM module drives a boost-stage MOSFET with sub-microsecond duty-cycle updates. Its hardware multiplier completes the multiply-accumulate operations needed for the discrete Fourier or notch-filtering algorithms that suppress line-frequency harmonics. This combination reduces total harmonic distortion (THD) below 5 percent at full load while maintaining > 0.99 power factor over the universal 85-265 VAC input range.
Direkomendasikan
Industrial CAN-Connected Sensor Hub
Industrial sensor hubs use the DSPIC30F6015T-30I/PT to aggregate field signals and forward them over CANopen or DeviceNet. The 16-channel 10-bit ADC scans up to 16 analog sensor inputs (temperature, pressure, flow), while the two integrated CAN 2.0 controllers support redundant CAN channels required in factory automation. The 8 KB RAM buffers incoming CAN frames and intermediate ADC results, and the 144 KB Flash holds protocol stack plus custom application code. The 64-pin TQFP package exposes all required I/O without external muxing, and the industrial temperature range tolerates cabinet temperatures up to +85 C.
Direkomendasikan
Automotive Sensor and Actuator Module
While not AEC-Q100 qualified, the DSPIC30F6015T-30I/PT's industrial -40C to +85C range and integrated CAN 2.0 controllers make it useful for non-safety automotive subsystems such as body controllers, HVAC actuators, and aftermarket instrument clusters. The 144 KB Flash stores calibration tables for analog sensor linearization, while the 8-channel 16-bit PWM module drives servo motors and proportional valves at 16-bit resolution. Designers should evaluate AEC-Q100 qualified parts like the dsPIC33F family for safety-critical ECUs, but for accessory modules this part provides strong DSP throughput at low BOM cost.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk DSPIC30F6015T-30I/PT — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | DSPIC30F6015-30I/PT | DSPIC30F6014AT-20E/PT | DSPIC30F6014A-30I/PF | DSPIC30F6014A-20E/PF | DSPIC30F6013AT-20E/PT | DSPIC30F6013A-30I/PT |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-pin TQFP (PT, 10x10 mm) | 64-pin TQFP (PT, 10x10 mm) - same | 64-pin TQFP (PT, 10x10 mm) - same | 64-pin TQFP (PT, 10x10 mm) - same | 64-pin TQFP (PT, 10x10 mm) - same | 64-pin TQFP (PT, 10x10 mm) - same | 64-pin TQFP (PT, 10x10 mm) - same |
| Core / Architecture | dsPIC30F 16-bit DSC | dsPIC30F 16-bit DSC - identical | dsPIC30F 16-bit DSC - same | dsPIC30F 16-bit DSC - same | dsPIC30F 16-bit DSC - same | dsPIC30F 16-bit DSC - same | dsPIC30F 16-bit DSC - same |
| CPU Speed (MIPS) | 30 MIPS at 30 MHz | 30 MIPS - identical | 20 MIPS (-33%) | 30 MIPS - equal | 20 MIPS (-33%) | 20 MIPS (-33%) | 30 MIPS - equal |
| Program Flash | 144 KB (48K x 24) | 144 KB - identical | 80 KB (-44%) | 80 KB (-44%) | 80 KB (-44%) | 132 KB (-8%) | 132 KB (-8%) |
| Data RAM | 8 KB | 8 KB - identical | 8 KB - same | 8 KB - same | 8 KB - same | 8 KB - same | 8 KB - same |
| Operating Voltage | 2.5 V to 5.5 V | 2.5 V to 5.5 V - identical | 2.5 V to 5.5 V - same | 2.5 V to 5.5 V - same | 2.5 V to 5.5 V - same | 2.5 V to 5.5 V - same | 2.5 V to 5.5 V - same |
| Operating Temperature | -40 C to +85 C (I grade) | -40 C to +85 C - identical | -40 C to +125 C (E grade) | -40 C to +85 C (I grade) | -40 C to +125 C (E grade) | -40 C to +125 C (E grade) | -40 C to +85 C (I grade) |
| CAN Modules | 2 | 2 - identical | 2 - same | 2 - same | 2 - same | 2 - same | 2 - same |
| Packaging Form | Tape & Reel ("T" suffix) | Tube (no "T" suffix) | Tape & Reel | Tape & Reel | Tape & Reel | Tape & Reel | Tube |
Diferensiator Kunci
- Highest program memory in the dsPIC30F60xx 64-pin PT family (vsDSPIC30F6014AT-20E/PT)
- 30 MIPS throughput matches the highest-speed dsPIC30F parts (vsDSPIC30F6014A-20E/PF)
- Larger Flash than the 6013 family at same 30 MIPS (vsDSPIC30F6013A-30I/PT)
Catatan Desain
The DSPIC30F6015T-30I/PT requires both a digital supply (Vdd, 2.5 V to 5.5 V) and an analog supply (AVdd, 2.5 V to 5.5 V). For best ADC linearity, tie AVdd to the same regulated rail as Vdd through a ferrite bead and decouple both with a 10 uF bulk plus a 0.1 uF ceramic placed within 5 mm of the package pin. AVDD noise above 50 mVpp couples directly into the ADC result; isolate digital switching currents from the analog plane. For motor-control boards drawing several amps through the ground return, use a star-ground or split-plane layout so that gate-driver return currents do not flow through the AVss pin.
Route the PWM outputs PWM1H/L through PWM4H/L with matched trace lengths (within 5 mm) and minimum 0.5 mm trace width to limit gate-driver skew between high-side and low-side FETs. The 30 MHz crystal or external clock trace to OSC1/CLKI must be kept short and surrounded by ground. Place the programming header (PGED1, PGEC1, MCLR) at the board edge for ICSP access. Decouple every Vdd/Vss pair with a 0.1 uF X7R ceramic plus a 10 uF bulk capacitor; place the ceramics within 3 mm of the supply pins.
The MCLR pin is active-low and must not be left floating; tie it to Vdd through a 10 kohm pull-up and to ground through a 100 nF capacitor for proper reset. When using the ADC in 10-bit mode, always allow at least 1 us acquisition time before conversion; sample too early and the ADC result will be biased by 5-10 LSB. The CAN modules need an external MCP2551 or similar transceiver - the dsPIC30F's C1RX/C1TX pins are logic-level signals, not bus-level. Finally, the JTAG programming pins PGED1/PGEC1 are multiplexed with Port B; if your application code reconfigures Port B, plan for a programming workaround or use ICSP rather than JTAG.
Informasi Konformitas
RoHS compliant per Microchip product page. Not AEC-Q100 qualified - choose dsPIC33F automotive parts for safety-critical ECUs.
