DSPIC33EP128GP502T-I/SO - 70MIPS 16-bit DSC | Microchip
MPN: DSPIC33EP128GP502T-I/SO ✓ AktifDSPIC33EP128GP502T-I/SO Ringkasan
A Digital Signal Controller combines the architectural strengths of a microcontroller (MCU) with the computational features of a digital signal processor (DSP). The dsPIC33E family sits within Microchip's broader 16-bit microcontroller and DSC hierarchy, offering the fastest 70 MIPS core in the portfolio together with DSP multiply-accumulate instructions, high code density, and advanced analog integration, making it a bridge between general-purpose MCUs and dedicated DSPs in embedded power management and control systems.
Key features include the 70 MIPS dsPIC33E core, CAN 2.0B communication, a Charge Time Measurement Unit (CTMU), Peripheral Trigger Generator (PTG), and multiple on-chip op amps and comparators. The enhanced high-speed PWM and superior ADC performance make it especially suitable for closed-loop digital power conversion and sensor-heavy control loops. IrDA, LINbus, I2C, and SPI serial interfaces round out connectivity options, and the device operates from a 3V to 3.6V supply.
Architecturally, the dsPIC33E core uses a modified Harvard pipeline with a 16-bit data path and 24-bit instruction width, supporting DSP-class MAC instructions alongside microcontroller peripherals. The GP (General Purpose) subfamily emphasizes broad peripheral coverage rather than motor-control-specific PWM features.
Typical applications include industrial automation nodes with CAN networking, digital power supplies and battery chargers, and general-purpose sensor interfaces leveraging the CTMU and integrated op amps.
Design consideration: at 70 MIPS ensure a stable 3.3V rail and proper decoupling on all VDD pins, and note that ICSP programming requires PGECx/PGEDx pairs to be used as matched pairs.
This page synthesizes distributor data, same-family drop-in alternatives, pinout, and practical design notes not consolidated in the manufacturer datasheet.
Alternatif penggantian untuk DSPIC33EP128GP502T-I/SO — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian DSPIC33EP128GP502T-I/SO (sama faktor bentuk dan footprint) — berbeda di dalam Package, Core Architecture, Operating Temperature, SRAM, Supply Voltage.
DSPIC33EP256GP502-I/SO
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →DSPIC33EP64GP502-I/SO
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
DSPIC33EP32GP502-I/SO
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →DSPIC33EP128GP502-H/SO
✅ Drop-InKontak untuk harga
Lihat Datasheet →DSPIC33EP64MC202-I/SO
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →DSPIC33EP128GP502-I/SO
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
DSPIC33EP128GP502T-I/SO Rating Maksimal & Karakteristik Listrik
| Core Architecture | 16-bit dsPIC33E DSC |
| Core Speed | 70 MIPS (60 MHz peripheral clock) |
| Flash Program Memory | 128KB (43K x 24) |
| RAM | 16KB |
| Operating Voltage | 3 V to 3.6 V |
| Paket | 28-SOIC (0.295", 7.50mm width) |
| Jumlah Pin | 28 |
| Tipe Mounting | Surface Mount |
| Connectivity | CANbus, I2C, SPI, IrDA, LINbus, UART |
| Peripherals | CTMU, PTG, Op Amps, Comparators, High-Speed PWM |
| Temperature Range | -40C to +85C (I grade) |
| Family | dsPIC33EP GP (General Purpose) |
| Programming/Debug | ICSP via PGECx/PGEDx pairs |
| Packaging Type | Tape & Reel (T suffix) |
| Standard Package Quantity | 1600 |
Konfigurasi Pin DSPIC33EP128GP502T-I/SO
| Pin produk 1 | MCLR — Master clear reset, programming voltage input |
| Pin produk 2 | AN0/CN2/RB0 — Analog input 0 / change notification / port B |
| Pin produk 3 | AN1/CN3/RB1 — Analog input 1 / change notification / port B |
| Pin produk 4 | AN2/SS1/CN4/RB2 — Analog input 2 / SPI slave select / port B |
| Pin produk 5 | AN3/INDX/CN5/RB3 — Analog input 3 / QEA index / port B |
| Pin produk 6 | AN4/CN6/RB4 — Analog input 4 / port B |
| Pin produk 7 | VDD — Power supply (3.0-3.6 V) |
| Pin produk 8 | OSC1/CLKI/RA2 — Crystal oscillator input / external clock |
| Pin produk 9 | OSC0/CLKO/RA3 — Crystal oscillator output / clock out |
| Pin produk 10 | PGED1/AN5/CN7/RB5 — In-circuit debug data channel 1 / analog input 5 |
| Pin produk 11 | PGEC1/AN6/CN8/RB6 — In-circuit debug clock channel 1 / analog input 6 |
| Pin produk 12 | AN7/CN9/RB7 — Analog input 7 / port B |
| Pin produk 13 | VSS — Ground reference |
| Pin produk 14 | VDD — Power supply (3.0-3.6 V) |
| Pin produk 15 | AN9/RB9 — Analog input 9 / port B |
| Pin produk 16 | AN10/RB10 — Analog input 10 / port B |
| Pin produk 17 | AN11/RB11 — Analog input 11 / port B |
| Pin produk 18 | AN12/RB12 — Analog input 12 / port B |
| Pin produk 19 | AN13/RB13 — Analog input 13 / port B |
| Pin produk 20 | AN14/RB14 — Analog input 14 / port B |
| Pin produk 21 | VSS — Ground reference |
| Pin produk 22 | VDD — Power supply (3.0-3.6 V) |
| Pin produk 23 | PGED2/AN8/RB8 — In-circuit debug data channel 2 / analog input 8 |
| Pin produk 24 | PGEC2/RP15/RF15 — In-circuit debug clock channel 2 / remappable pin |
| Pin produk 25 | RP14/RF14 — Peripheral remappable pin / port F |
| Pin produk 26 | RP13/RF13 — Peripheral remappable pin / port F |
| Pin produk 27 | RP12/RTCC/RF12 — Remappable pin / RTCC alarm / port F |
| Pin produk 28 | RP11/RF11 — Peripheral remappable pin / port F |
Aplikasi Umum
DSPIC33EP128GP502T-I/SO cocok untuk 6 aplikasis: Industrial CAN Networking Nodes, Digital Power Supplies and Converters, Analog Sensor Interfaces, Motor Control Subsystems, Secure Embedded Systems, General Purpose Embedded Control.
Industrial CAN Networking Nodes
The integrated CAN 2.0B controller makes the DSPIC33EP128GP502T-I/SO a natural fit for industrial automation nodes on CANopen- or J1939-style buses. Its 70 MIPS dsPIC33E core has the headroom to run the application stack plus message filtering without external co-processors, while LINbus, UART, and SPI cover hybrid networks. 128KB Flash holds protocol stacks (e.g., CANopen) with room for field updates, and the 16KB RAM supports several buffered mailboxes. Place the CAN transceiver (e.g., MCP2551-class) on the C1TX/C1RX pins with a 120-ohm termination; the on-chip DMA offloads message handling so control-loop timing stays deterministic under bus load.
Direkomendasikan
Digital Power Supplies and Converters
The 70 MIPS core combined with high-speed PWM and the Peripheral Trigger Generator (PTG) makes the GP502 well suited to closed-loop buck, boost, and PFC converters. The PTG can sequence ADC sampling and PWM updates autonomously, keeping loop latency predictable, while DSP MAC instructions accelerate PI/PID compensation math. Microchip highlights this family's superior ADC performance for exactly this use case. Use the high-speed PWM module at switching frequencies of 100-500 kHz, feed the ADC through the PTG trigger, and keep the compensation ISR under a few microseconds. Note the GP502's PWM set is general purpose; for multi-phase or motor drives, consider the MC variants of the same dsPIC33E family.
Direkomendasikan
Analog Sensor Interfaces
With on-chip op amps, comparators, and the Charge Time Measurement Unit (CTMU), the DSPIC33EP128GP502T-I/SO can condition and measure sensors with minimal external components. The CTMU provides precise time-based charge measurement for capacitive sensing and current measurement (time-of-flight style), while the internal op amps can buffer or amplify signals at gain settings controlled in firmware. AN0-AN4 arrive directly on pins 2-6 of the SOIC-28. A typical topology feeds a bridge sensor into the internal op amp, samples via the 10/12-bit ADC at PTG-controlled intervals, and applies DSP filtering in the 70 MIPS core - avoiding a separate analog front end and shortening the signal chain.
Direkomendasikan
Motor Control Subsystems
Although the GP subfamily is not motor-control-specific, the 70 MIPS dsPIC33E core and high-speed PWM handles small BLDC/DC motor control tasks effectively, with the 128KB Flash accommodating sensorless estimation code (BEMF observers) plus commutation. The DSP MAC engine computes control loops fast enough for current-loop control in the tens-of-kHz range. Use complementary PWM outputs through gate drivers, sample shunt currents via the on-chip op amps to the ADC, and reserve the comparator module for cycle-by-cycle overcurrent protection. For traction or multi-axis designs, the same-footprint MC202 variants or dsPIC33CK parts provide dedicated motor PWM features and higher throughput.
Direkomendasikan
Secure Embedded Systems
For designs that require cryptographic protection, the drop-in DSPIC33EP128GP502-H/SO variant (identical footprint and die family) adds a Secure Hash accelerator, enabling SHA-256 secure boot and firmware authentication without changing the PCB. The standard GP502T-I/SO can be swapped to the -H part during production to add security, or the -H part can serve as a second-source in a common footprint to hedge supply. 128KB Flash stores the application plus signature verification code; 70 MIPS keeps boot-time authentication under tens of milliseconds. This makes the family attractive to industrial equipment vendors implementing secure firmware update flows over CAN or UART bootloaders.
Direkomendasikan
General Purpose Embedded Control
As a general-purpose 16-bit controller, the GP502 in SOIC-28 offers a balanced peripheral mix - I2C, SPI, two UARTs with IrDA/LIN support, PWM, ADC, CTMU, and PTG - at 70 MIPS, comfortably outperforming classic 8-bit PIC16/18 parts while retaining low cost and wide temperature availability. Typical uses include appliance control, metering front ends, HVAC boards, and instrumentation panels. The hand-migratable peripheral set, free MPLAB X IDE and XC16 compiler, and 5V-tolerant-style robustness make upgrades from dsPIC33F straightforward since code largely ports with minor configuration changes. Reuse of the SOIC-28 footprint across Flash sizes (32/64/128/256KB) simplifies BOM tiering across product lines.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk DSPIC33EP128GP502T-I/SO — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | DSPIC33EP128GP502-H/SO | DSPIC33EP256GP502-I/SO | DSPIC33EP64GP502-I/SO | DSPIC33EP64MC202-I/SO | DSPIC33EP128GP502T-I/MM |
|---|---|---|---|---|---|---|
| Package | 28-SOIC (7.50mm) | 28-SOIC (7.50mm) - same | 28-SOIC (7.50mm) - same | 28-SOIC (7.50mm) - same | 28-SOIC (7.50mm) - same | 28-QFN-S 6x6 (different) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Speed | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS |
| Flash Memory | 128KB | 128KB | 256KB | 64KB | 64KB | 128KB |
| CAN Controller | Yes (CAN 2.0B) | Yes | Yes | Yes | Yes | Yes |
| Crypto / Secure Hash | No | Yes (SHA) | No | No | No | No |
| Peripheral Family | GP (General Purpose) | GP | GP | GP | MC (Motor Control) | GP |
Diferensiator Kunci
- Largest Flash in same SOIC-28 footprint at 256KB (vsDSPIC33EP256GP502-I/SO)
- Crypto-free standard part at lower cost (vsDSPIC33EP128GP502-H/SO)
- General Purpose peripheral set with CAN and CTMU (vsDSPIC33EP64MC202-I/SO)
Catatan Desain
Decouple every VDD pin (pins 7, 14, 22) with a 0.1uF ceramic capacitor placed within 2mm of the pin, tied to the nearest VSS (pins 13, 21) with short return paths. At 70 MIPS with internal PLL, supply ripple couples directly into the ADC and oscillator, so a solid ground plane and one bulk 10uF capacitor per supply region are recommended. Keep the crystal (pins 8-9) within 10mm of the device with guard ground traces.
ICSP programming requires PGECx/PGEDx to be used as matched pairs - if PGEC2 is wired to ICSPCLK, ICSPDAT must go to PGED2. Mixing pairs prevents programming. Also note that analog-capable pins default to analog mode after reset; firmware must clear ANSEL-type registers (AD1PCFGL) before using pins 2-6 and 10-12, 15-20, 23 as digital I/O, a common first-run bring-up failure.
Estimated: core current at 70 MIPS is on the order of 40-60 mA (typical for dsPIC33E family; consult the datasheet electrical characteristics chapter for the exact figure). A 3.3V regulator rated at 150 mA or more per device plus I/O budget provides margin. Sequence MCLR low during power-up and use a supervisor reset for reliable flash programming and PLL lock.
Remappable pins RP11-RP15 (pins 24-28) let you route UART/SPI anywhere, but keep high-speed SPI traces under 10cm and series-terminate 33-ohm if driving off-board. For CAN on remappable pins, route TX/RX as a short differential pair after the transceiver and observe the 120-ohm bus termination at both network ends only.
Informasi Konformitas
Compliance status not stated in the retrieved web data; verify on Microchip's product page. AEC-Q100-qualified variants exist in the broader family (e.g., DSPIC33EP128GP502T-E/SS is listed as AEC-Q100 qualified), but this commercial-grade /SO part is not automotive qualified.
