EP4CE15E22C8LN - 15,408-Logic-Element Cyclone IV E FPGA | Altera
MPN: EP4CE15E22C8LN ✓ AktifEP4CE15E22C8LN Ringkasan
A field-programmable gate array is a semiconductor whose digital logic, memory, and programmable I/O resources are configured after fabrication. An FPGA belongs to the broader programmable-logic hierarchy, combining configurable logic elements, block RAM, programmable input/output, and dedicated clock resources on one integrated circuit. Cyclone IV E devices are intended for embedded systems requiring moderate logic density, deterministic parallel interfaces, and reprogrammable control logic without the cost and complexity of a larger FPGA family.
The EP4CE15E22C8LN offers 15,408 logic elements and 504 Kb of embedded block RAM. Its 81 memory blocks support designs that require local data storage, packet buffering, or moderate-width data paths. The 144-pin exposed-pad package provides access to the device's user I/O while supporting thermal dissipation through a PCB land pattern and copper area. The listed 1.2 V core supply is distinct from the external I/O voltage supplies required by the selected banks.
The E22 package assigns the Cyclone IV E I/O and core resources to a 144-pin footprint. Because an FPGA design depends on the exact package pinout, bank voltage limits, configuration pins, and dedicated power pins, hardware substitution cannot be based only on logic-cell count. Configuration and programming behavior are also determined by the complete device ordering code rather than by the EP4CE15 family name alone.
Typical uses include industrial control, test and measurement equipment, communications interfaces, video or display control, embedded instrumentation, and general-purpose prototyping. The 15,408-logic-element device is appropriate when parallel data acquisition, protocol bridging, control sequencing, or multiple I/O interfaces must be consolidated into a single programmable device. Designs requiring substantially more logic, memory, high-speed transceivers, or hard processors should be compared with larger Cyclone devices.
PCB implementation should follow the manufacturer package drawing and pin-information document. Decoupling must be placed at the appropriate core and I/O supply pins, and the exposed thermal pad requires a compatible land pattern and adequate copper. Confirm every signal, voltage bank, configuration connection, and unused pin against the package-specific documentation before releasing a layout.
This product page organizes the exact EP4CE15E22C8LN ordering information, verified device attributes, source documents, commercial inquiry path, and drop-in qualification analysis. It also highlights which package and electrical details must still be confirmed directly in the Cyclone IV E documentation before schematic or layout signoff.
Alternatif penggantian untuk EP4CE15E22C8LN — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian EP4CE15E22C8LN (sama faktor bentuk dan footprint).
EP4CE15E22C8N
✅ Drop-InKontak untuk harga
Lihat Datasheet →EP4CE15E22C8LN Rating Maksimal & Karakteristik Listrik
| Device Type | FPGA |
| Device Family | Cyclone IV E |
| Base Device | EP4CE15 |
| Package Configuration | E22 |
| Logic Elements | 15,408 |
| Logic Blocks | 47 |
| Embedded Memory | 516,096 bits |
| Block RAM Capacity | 504 Kb |
| Embedded Memory Blocks | 81 |
| Core Supply Voltage | 1.2 V |
| Package Type | EQFP-144 with exposed pad |
| Package Pin Count | 144 pins |
| Package Dimensions | 20 mm × 20 mm |
| Technology | 60 nm |
| Speed Grade | 8 |
| Commercial Junction Temperature Range | 0 °C to 85 °C |
| Tipe Mounting | Surface mount |
EP4CE15E22C8LN 20 mm × 20 mm Diamant Konfigurasi Panduan
Konfigurasi pin untuk EP4CE15E22C8LN (20 mm × 20 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk EP4CE15E22C8LN.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
EP4CE15E22C8LN cocok untuk 6 aplikasis: Industrial Control Logic, Test and Measurement Instrumentation, Communications Interface Bridging, Parallel Video Timing Control, Embedded Data Acquisition, Programmable Protocol and Security Controller.
Industrial Control Logic
The EP4CE15E22C8LN fits industrial control logic requiring coordinated digital inputs, outputs, sequencing, and local data buffering. Its 15,408 logic elements and 47 logic blocks provide capacity for multiple control channels, while 504 Kb of block RAM can hold state, counters, diagnostics, and communication buffers. The 144-pin exposed-pad package also gives the designer access to a substantial I/O count for digital sensors, actuators, interlocks, and machine-control interfaces. The C8 speed grade and 0 °C to 85 °C commercial junction specification should be checked against the actual control cabinet environment. For motor drives, safety loops, or isolated interfaces, external protection and isolation hardware remain necessary because the FPGA does not provide those functions internally.
Direkomendasikan
Test and Measurement Instrumentation
The EP4CE15E22C8LN is useful in programmable test and measurement equipment that must coordinate several data paths without relying on a microcontroller for every timing operation. The 15,408 logic elements can implement acquisition control, trigger logic, sequencing, and digital signal conditioning, while 516,096 bits of block RAM can buffer parallel samples or intermediate results. Its 144-pin package supports interfaces to converters, memory devices, communication transceivers, and front-panel controllers. Design closure depends on whether required timing interfaces are implemented directly in FPGA I/O or through external converters. Clocking, jitter, input thresholds, and analog accuracy must therefore be evaluated at the system level rather than inferred from the FPGA’s logic and RAM totals.
Direkomendasikan
Communications Interface Bridging
The EP4CE15E22C8LN can bridge parallel and serial interfaces when a design needs protocol conversion, packet buffering, or custom framing. Its 504 Kb of embedded RAM and 81 memory blocks provide local storage for receive and transmit FIFOs, while the programmable logic can terminate multiple interface domains and perform clock-domain crossing using appropriate constraints and synchronization methods. The 144-pin package makes it practical to connect the FPGA to transceivers, PHYs, and embedded processors in a communications subsystem. The exact supported transceiver standards are not inherent properties of the FPGA, so protocol rates and electrical signaling should be assigned to suitable companion devices. Configuration, reset, and clock distribution must be designed to avoid data loss or metastability during interface transfers.
Direkomendasikan
Parallel Video Timing Control
The EP4CE15E22C8LN fits parallel video timing, pixel and line timing, overlay generation, and display-control functions where a dedicated display controller is unnecessary. Its programmable I/O permits multiple synchronized output or input signals, and 15,408 logic elements are sufficient for many timing-generation, blanking, cursor, and control functions. The 504 Kb of block RAM can support limited frame buffering or line-based processing, although full high-resolution frame buffering may require external memory. Actual pixel rate, lane timing, color depth, and I/O voltage determine whether the design is practical. External memory interface timing and panel constraints must be verified in the Cyclone IV E device documentation, and PCB signal-integrity checks should include clock jitter, impedance, and connector losses.
Direkomendasikan
Embedded Data Acquisition
The EP4CE15E22C8LN is appropriate for embedded acquisition systems that must combine multiple parallel data sources, perform digital preprocessing, and transfer results through a communication link. Its 81 embedded memory blocks and 504 Kb capacity can hold samples, thresholding results, or acquisition descriptors, while the 47 logic blocks and remaining programmable logic support counters, filters, and control sequences. The 144-pin package provides I/O for converters, sensors, clocks, and network interfaces, but analog bandwidth and conversion performance are not provided by the FPGA. A complete design must account for converter resolution, sampling clock quality, anti-alias filtering, data latency, and buffer depth. Synchronous sampling and clocking strategy should be selected before assigning logic resources so that timing margins are not reduced by late architectural changes.
Direkomendasikan
Programmable Protocol and Security Controller
The EP4CE15E22C8LN can serve as a programmable protocol controller or hardware-assisted security node when the design benefits from parallel logic and dedicated block RAM. Resource blocks can implement finite-state machines, packet checks, encryption pipelines, key schedules, or command filters, while the 144-pin interface supports external nonvolatile storage, secure elements, and management processors. These functions are design-dependent and are not guaranteed by the device specifications. Safe implementation requires a defined threat model, correct key handling, fault detection, startup behavior, and update strategy. Timing attacks and side-channel resistance require system-level review of the selected algorithm and implementation. The device should also be evaluated for security updates because programmable FPGA configurations can alter firmware-like behavior and require a controlled configuration path.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk EP4CE15E22C8LN — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | EP4CE15E22C8N |
|---|---|---|
| Manufacturer | Altera | Altera |
| Package | EQFP-144 with exposed pad | 144-LQFP exposed pad |
| Device Family | Cyclone IV E | Cyclone IV E |
| Base Device | EP4CE15 | EP4CE15 |
| Logic Elements | 15,408 | 15,408 |
| Logic Blocks | 47 | 47 |
| Embedded Memory | 516,096 bits | 516,096 bits |
| Block RAM Capacity | 504 Kb | 504 Kb |
| Embedded Memory Blocks | 81 | 81 |
| Core Supply Voltage | 1.2 V | 1.2 V |
| Technology | 60 nm | 60 nm |
| Speed Grade | 8 | 8 |
Diferensiator Kunci
- Exact E22 package configuration (vsEP4CE15E22C8N)
- Integrated medium-density programmable resources (vsEP4CE15E22C8N)
- Match to the original 144-pin system footprint (vsEP4CE15E22C8N)
Catatan Desain
Treat the exposed pad as a mandatory thermal and electrical connection rather than an optional package feature. Follow the manufacturer land-pattern guidance for the 20 mm × 20 mm E22 package, provide a continuous solderable pad area, and connect it to the specified ground plane. Validate junction temperature under maximum operating activity and the highest ambient temperature. Estimate: thermal performance depends on the actual exposed-pad geometry, copper area, via count, board stack-up, airflow, and neighboring heat sources, which are not available here.
Separate the 1.2 V core-supply design from the configurable I/O-bank supplies. Place the required decoupling capacitors at the corresponding core and I/O pins using the values and tolerances defined in the Cyclone IV E power-guidance document, then keep high-current return paths short. Confirm each bank voltage against every signal assigned to that bank. Do not infer I/O tolerance solely from the core voltage, because programmable banks can support different voltage ranges than the internal core.
Use the package-specific E22 footprint and pin-information table rather than a generic 144-pin library symbol. Verify every power, ground, configuration, clock, and user I/O assignment against the manufacturer data before release. Route clocks as controlled-length or differential structures where the design requires them, and preserve the ground reference beneath high-speed routes. Independent schematic, footprint, and pin-assignment reviews help prevent errors caused by visually similar but electrically different package variants.
Do not treat EP4CE15E22C8N as an unconditional substitute for EP4CE15E22C8LN. Although both identify the EP4CE15 E22 platform and use a 144-pin exposed-pad format, the final ordering suffix may distinguish lifecycle, temperature, or other ordering conditions. Obtain the current ordering-information table and compare the exact suffixes before schematic or BOM approval. Also confirm that the design fits 15,408 logic elements, 504 Kb of block RAM, the available user I/O, and the required timing performance.
Informasi Konformitas
The available device listings do not provide a conclusive RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration for the exact ordering part number. Consult the current manufacturer product page and applicable compliance documentation before procurement.