Altera

EP4CE15E22C8LN - 15,408-Logic-Element Cyclone IV E FPGA | Altera

MPN: EP4CE15E22C8LN ✓ فعال
1.2 V Vdss E22 Package 8 Speed 516,096 bits Memory
MOQ: 1 |

EP4CE15E22C8LN جائزہ

The Altera EP4CE15E22C8LN is a Cyclone IV E field-programmable gate array built around the EP4CE15 device and E22 package configuration. It provides 15,408 logic elements, 516,096 bits of block RAM, 81 embedded memory blocks, a 1.2 V supply, and 144 package pins in a 20 mm × 20 mm EQFP with an exposed thermal pad. The C8 speed designation identifies the performance grade, while the E22 suffix identifies the supported package configuration.

A field-programmable gate array is a semiconductor whose digital logic, memory, and programmable I/O resources are configured after fabrication. An FPGA belongs to the broader programmable-logic hierarchy, combining configurable logic elements, block RAM, programmable input/output, and dedicated clock resources on one integrated circuit. Cyclone IV E devices are intended for embedded systems requiring moderate logic density, deterministic parallel interfaces, and reprogrammable control logic without the cost and complexity of a larger FPGA family.

The EP4CE15E22C8LN offers 15,408 logic elements and 504 Kb of embedded block RAM. Its 81 memory blocks support designs that require local data storage, packet buffering, or moderate-width data paths. The 144-pin exposed-pad package provides access to the device's user I/O while supporting thermal dissipation through a PCB land pattern and copper area. The listed 1.2 V core supply is distinct from the external I/O voltage supplies required by the selected banks.

The E22 package assigns the Cyclone IV E I/O and core resources to a 144-pin footprint. Because an FPGA design depends on the exact package pinout, bank voltage limits, configuration pins, and dedicated power pins, hardware substitution cannot be based only on logic-cell count. Configuration and programming behavior are also determined by the complete device ordering code rather than by the EP4CE15 family name alone.

Typical uses include industrial control, test and measurement equipment, communications interfaces, video or display control, embedded instrumentation, and general-purpose prototyping. The 15,408-logic-element device is appropriate when parallel data acquisition, protocol bridging, control sequencing, or multiple I/O interfaces must be consolidated into a single programmable device. Designs requiring substantially more logic, memory, high-speed transceivers, or hard processors should be compared with larger Cyclone devices.

PCB implementation should follow the manufacturer package drawing and pin-information document. Decoupling must be placed at the appropriate core and I/O supply pins, and the exposed thermal pad requires a compatible land pattern and adequate copper. Confirm every signal, voltage bank, configuration connection, and unused pin against the package-specific documentation before releasing a layout.

This product page organizes the exact EP4CE15E22C8LN ordering information, verified device attributes, source documents, commercial inquiry path, and drop-in qualification analysis. It also highlights which package and electrical details must still be confirmed directly in the Cyclone IV E documentation before schematic or layout signoff.

کے لیے ڈراپ اِن متبادل EP4CE15E22C8LN — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں EP4CE15E22C8LN (یکساں فارم فیکٹر اور فٹ پرنٹ).

EP4CE15E22C8N

✅ ڈراپ-اِن
Intel
📦 EQFP-144 with exposed pad
Cyclone IV E · 15,408 · 516,096 · 504 · 56 · 4 · 81 · 1.2 V

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

EP4CE15E22C8LN زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Device Type FPGA
Device Family Cyclone IV E
Base Device EP4CE15
Package Configuration E22
Logic Elements 15,408
Logic Blocks 47
Embedded Memory 516,096 bits
Block RAM Capacity 504 Kb
Embedded Memory Blocks 81
Core Supply Voltage 1.2 V
Package Type EQFP-144 with exposed pad
Package Pin Count 144 pins
Package Dimensions 20 mm × 20 mm
Technology 60 nm
Speed Grade 8
Commercial Junction Temperature Range 0 °C to 85 °C
ماؤنٹنگ ٹائپ Surface mount

EP4CE15E22C8LN 20 mm × 20 mm پن کنفیگریشن گائیڈ

EP4CE15E22C8LN (20 mm × 20 mm پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔

EP4CE15E22C8LN کے لیے 20 mm × 20 mm پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں EP4CE15E22C8LN.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

EP4CE15E22C8LN کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Control Logic, Test and Measurement Instrumentation, Communications Interface Bridging, Parallel Video Timing Control, Embedded Data Acquisition, Programmable Protocol and Security Controller.

🏭

Industrial Control Logic

The EP4CE15E22C8LN fits industrial control logic requiring coordinated digital inputs, outputs, sequencing, and local data buffering. Its 15,408 logic elements and 47 logic blocks provide capacity for multiple control channels, while 504 Kb of block RAM can hold state, counters, diagnostics, and communication buffers. The 144-pin exposed-pad package also gives the designer access to a substantial I/O count for digital sensors, actuators, interlocks, and machine-control interfaces. The C8 speed grade and 0 °C to 85 °C commercial junction specification should be checked against the actual control cabinet environment. For motor drives, safety loops, or isolated interfaces, external protection and isolation hardware remain necessary because the FPGA does not provide those functions internally.

🔧

Test and Measurement Instrumentation

The EP4CE15E22C8LN is useful in programmable test and measurement equipment that must coordinate several data paths without relying on a microcontroller for every timing operation. The 15,408 logic elements can implement acquisition control, trigger logic, sequencing, and digital signal conditioning, while 516,096 bits of block RAM can buffer parallel samples or intermediate results. Its 144-pin package supports interfaces to converters, memory devices, communication transceivers, and front-panel controllers. Design closure depends on whether required timing interfaces are implemented directly in FPGA I/O or through external converters. Clocking, jitter, input thresholds, and analog accuracy must therefore be evaluated at the system level rather than inferred from the FPGA’s logic and RAM totals.

🌐

Communications Interface Bridging

The EP4CE15E22C8LN can bridge parallel and serial interfaces when a design needs protocol conversion, packet buffering, or custom framing. Its 504 Kb of embedded RAM and 81 memory blocks provide local storage for receive and transmit FIFOs, while the programmable logic can terminate multiple interface domains and perform clock-domain crossing using appropriate constraints and synchronization methods. The 144-pin package makes it practical to connect the FPGA to transceivers, PHYs, and embedded processors in a communications subsystem. The exact supported transceiver standards are not inherent properties of the FPGA, so protocol rates and electrical signaling should be assigned to suitable companion devices. Configuration, reset, and clock distribution must be designed to avoid data loss or metastability during interface transfers.

📺

Parallel Video Timing Control

The EP4CE15E22C8LN fits parallel video timing, pixel and line timing, overlay generation, and display-control functions where a dedicated display controller is unnecessary. Its programmable I/O permits multiple synchronized output or input signals, and 15,408 logic elements are sufficient for many timing-generation, blanking, cursor, and control functions. The 504 Kb of block RAM can support limited frame buffering or line-based processing, although full high-resolution frame buffering may require external memory. Actual pixel rate, lane timing, color depth, and I/O voltage determine whether the design is practical. External memory interface timing and panel constraints must be verified in the Cyclone IV E device documentation, and PCB signal-integrity checks should include clock jitter, impedance, and connector losses.

🧩

Embedded Data Acquisition

The EP4CE15E22C8LN is appropriate for embedded acquisition systems that must combine multiple parallel data sources, perform digital preprocessing, and transfer results through a communication link. Its 81 embedded memory blocks and 504 Kb capacity can hold samples, thresholding results, or acquisition descriptors, while the 47 logic blocks and remaining programmable logic support counters, filters, and control sequences. The 144-pin package provides I/O for converters, sensors, clocks, and network interfaces, but analog bandwidth and conversion performance are not provided by the FPGA. A complete design must account for converter resolution, sampling clock quality, anti-alias filtering, data latency, and buffer depth. Synchronous sampling and clocking strategy should be selected before assigning logic resources so that timing margins are not reduced by late architectural changes.

🔒

Programmable Protocol and Security Controller

The EP4CE15E22C8LN can serve as a programmable protocol controller or hardware-assisted security node when the design benefits from parallel logic and dedicated block RAM. Resource blocks can implement finite-state machines, packet checks, encryption pipelines, key schedules, or command filters, while the 144-pin interface supports external nonvolatile storage, secure elements, and management processors. These functions are design-dependent and are not guaranteed by the device specifications. Safe implementation requires a defined threat model, correct key handling, fault detection, startup behavior, and update strategy. Timing attacks and side-channel resistance require system-level review of the selected algorithm and implementation. The device should also be evaluated for security updates because programmable FPGA configurations can alter firmware-like behavior and require a controlled configuration path.

What is the EP4CE15E22C8LN?
The EP4CE15E22C8LN is an Altera Cyclone IV E FPGA with 15,408 logic elements, 516,096 bits of block RAM, and 144 pins in an exposed-pad EQFP package. According to the manufacturer product page, it is the EP4CE15 device in the E22 package configuration, a 20 mm × 20 mm surface-mount package. It is intended for embedded control, interface bridging, instrumentation, and other designs requiring configurable digital logic.
How much logic and memory does the EP4CE15E22C8LN contain?
The EP4CE15E22C8LN contains 15,408 logic elements organized into 47 logic blocks. It also provides 516,096 bits, or 504 Kb, of embedded block RAM distributed across 81 memory blocks. These figures identify it as the EP4CE15 density level within the Cyclone IV E family and allow designers to estimate parallel logic and buffered-data requirements before beginning a Quartus Prime compilation.
What package does the EP4CE15E22C8LN use?
The EP4CE15E22C8LN uses the E22 package configuration, identified in the device documentation as an EQFP-144 with exposed pad and 144 pins. The package measures 20 mm × 20 mm. Because this is a programmable device, the exposed pad, power pins, configuration pins, and I/O assignments must follow the exact package drawing rather than a generic 144-pin footprint.
What is the core supply voltage of the EP4CE15E22C8LN?
The EP4CE15E22C8LN uses a 1.2 V core supply. The 1.2 V figure applies to the internal core and must not be treated as the voltage permitted on every user I/O pin. External I/O banks can require separate supply levels, so each bank voltage and pin tolerance must be verified against the package-specific pin information before schematic approval.
Where can I download the EP4CE15E22C8LN datasheet and pin information?
The EP4CE15E22C8LN manufacturer product page provides access to detailed electrical, packaging, and performance information for this ordering part number. For PCB implementation, use the Cyclone IV E pin-information document and package drawing corresponding to the E22 configuration. The available Intel pin-information listing covers the EP4CE22 device, so individual EP4CE15E22C8LN pin assignments should be confirmed against the matching device and package tables.
Where can I buy the EP4CE15E22C8LN and check current availability?
Use the Request a Quote form on this page to ask about EP4CE15E22C8LN availability, current lead time, minimum order quantity, and shipment terms. The component is an FPGA ordering part number rather than a generic catalog description, so its exact suffix, speed grade, and package must remain unchanged when the quotation is prepared. Current availability should be confirmed through the quotation process.
What is the price of the EP4CE15E22C8LN?
The current price of the EP4CE15E22C8LN should be requested through the Request a Quote form on this page. A quotation should identify the complete EP4CE15E22C8LN ordering part number so that price, stock status, and lead time correspond to the exact 144-pin exposed-pad FPGA rather than a related Cyclone IV E speed grade or package configuration.
What is the lead time for the EP4CE15E22C8LN?
Request the current EP4CE15E22C8LN lead time through the Request a Quote form on this page. Lead time can vary with order quantity, purchase scheduling, and market availability, so it should not be inferred from generic FPGA inventory. Include the required quantity and target delivery date in the request to obtain a schedule suitable for production planning.
Is the EP4CE15E22C8LN currently in stock?
Current stock status for the EP4CE15E22C8LN is best confirmed through the Request a Quote form on this page. Stock should be quoted against the complete suffix, including the E22 package, C8 speed grade, and LN ordering characters. This avoids treating the related EP4CE15E22C8N listing as confirmation of inventory for the exact requested device.
Is the EP4CE15E22C8LN suitable for industrial control and instrumentation?
The EP4CE15E22C8LN is suitable for many embedded control and instrumentation designs because it combines 15,408 logic elements, 504 Kb of block RAM, and programmable I/O in a compact 144-pin package. Suitability also depends on temperature grade, I/O voltage requirements, timing closure, and system qualification. The available specification lists a 0 °C to 85 °C commercial junction range, so harsher environments require separate qualification.
EP4CE15E22C8LN vs EP4CE15E22C8N - which is better?
Both orderings identify an EP4CE15 device in the E22 package with the C8 speed designation, but they are not automatically interchangeable because the final suffix can encode lifecycle, temperature, or ordering distinctions. The EP4CE15E22C8N is explicitly listed as a 144-LQFP exposed-pad device. Compare the complete ordering tables, temperature grade, availability, and package documentation before treating it as a substitute.
When should I choose the EP4CE15E22C8LN over another Cyclone IV E device?
Choose the EP4CE15E22C8LN when a design fits within 15,408 logic elements and 504 Kb of block RAM and specifically requires the E22 144-pin exposed-pad configuration. Select a smaller EP4CE device for lower resource demand or a larger device for more logic, memory, I/O, or timing margin. The package must also match the PCB, so device density alone does not make a different Cyclone IV E order a drop-in replacement.
Is the EP4CE15E22C8LN suitable for a video or display control application?
The EP4CE15E22C8LN can suit parallel video timing, control, and data-processing tasks when its logic, RAM, and I/O resources meet the design. Its 15,408 logic elements and 504 Kb of block RAM support moderate acquisition and buffering functions, while the 144-pin package provides programmable user I/O. Video interface speed, voltage standards, external memory, and timing closure remain system-level constraints that the device totals alone do not resolve.
What can replace the EP4CE15E22C8LN?
The closest identified ordering candidate is the EP4CE15E22C8N, which uses the same EP4CE15 E22 configuration and 144-pin exposed-pad format. It should be treated as a conditional candidate until the final suffix, temperature grade, lifecycle status, and exact pin assignments are compared. No cross-manufacturer FPGA was identified as a pin-compatible drop-in replacement, because FPGA equivalence requires identical package pins, voltage banks, configuration behavior, and device resources.
What are the key specifications of EP4CE15E22C8LN that engineers should know?
The EP4CE15E22C8LN combines 15,408 logic elements, 47 logic blocks, 516,096 bits of block RAM, 81 embedded memory blocks, and 144 pins in a 20 mm × 20 mm exposed-pad EQFP. Its core supply is 1.2 V, its technology is 60 nm, and its speed grade is C8. The device uses 47 logic blocks according to the indexed specifications, while the manufacturer identifies the product as part of the Cyclone IV E EP4CE15 E22 family.

کے لیے انجینئرنگ ریفرنس ڈیٹا EP4CE15E22C8LN — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the EP4CE15E22C8LN when the design requires the exact E22 144-pin exposed-pad configuration and fits within 15,408 logic elements, 504 Kb of block RAM, 81 memory blocks, and the available user I/O. It is appropriate for programmable control, protocol conversion, acquisition, timing, and general embedded logic where the 1.2 V core supply and external bank-voltage plan are acceptable. Consider EP4CE15E22C8N only after confirming that the final suffix does not change the required temperature grade, lifecycle conditions, or ordering status. Do not select a smaller EP4CE10 device merely to reuse the footprint: its lower logic capacity can create timing and resource-compilation problems. A larger Cyclone IV E device may be necessary when routing, RAM depth, I/O count, or timing margin is insufficient. For any alternative, validate configuration pins, power banks, exposed-pad layout, and Quartus Prime device support before release.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ EP4CE15E22C8N
Manufacturer Altera Altera
Package EQFP-144 with exposed pad 144-LQFP exposed pad
Device Family Cyclone IV E Cyclone IV E
Base Device EP4CE15 EP4CE15
Logic Elements 15,408 15,408
Logic Blocks 47 47
Embedded Memory 516,096 bits 516,096 bits
Block RAM Capacity 504 Kb 504 Kb
Embedded Memory Blocks 81 81
Core Supply Voltage 1.2 V 1.2 V
Technology 60 nm 60 nm
Speed Grade 8 8

اہم امتیازی خصوصیات

  • Exact E22 package configuration (بمقابلہEP4CE15E22C8N)
  • Integrated medium-density programmable resources (بمقابلہEP4CE15E22C8N)
  • Match to the original 144-pin system footprint (بمقابلہEP4CE15E22C8N)

ڈیزائن نوٹس

Treat the exposed pad as a mandatory thermal and electrical connection rather than an optional package feature. Follow the manufacturer land-pattern guidance for the 20 mm × 20 mm E22 package, provide a continuous solderable pad area, and connect it to the specified ground plane. Validate junction temperature under maximum operating activity and the highest ambient temperature. Estimate: thermal performance depends on the actual exposed-pad geometry, copper area, via count, board stack-up, airflow, and neighboring heat sources, which are not available here.

Separate the 1.2 V core-supply design from the configurable I/O-bank supplies. Place the required decoupling capacitors at the corresponding core and I/O pins using the values and tolerances defined in the Cyclone IV E power-guidance document, then keep high-current return paths short. Confirm each bank voltage against every signal assigned to that bank. Do not infer I/O tolerance solely from the core voltage, because programmable banks can support different voltage ranges than the internal core.

Use the package-specific E22 footprint and pin-information table rather than a generic 144-pin library symbol. Verify every power, ground, configuration, clock, and user I/O assignment against the manufacturer data before release. Route clocks as controlled-length or differential structures where the design requires them, and preserve the ground reference beneath high-speed routes. Independent schematic, footprint, and pin-assignment reviews help prevent errors caused by visually similar but electrically different package variants.

Do not treat EP4CE15E22C8N as an unconditional substitute for EP4CE15E22C8LN. Although both identify the EP4CE15 E22 platform and use a 144-pin exposed-pad format, the final ordering suffix may distinguish lifecycle, temperature, or other ordering conditions. Obtain the current ordering-information table and compare the exact suffixes before schematic or BOM approval. Also confirm that the design fits 15,408 logic elements, 504 Kb of block RAM, the available user I/O, and the required timing performance.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The available device listings do not provide a conclusive RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration for the exact ordering part number. Consult the current manufacturer product page and applicable compliance documentation before procurement.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-14 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

EP4CE15E22C8LN EP4CE15E22C8LN datasheet EP4CE15E22C8LN specifications EP4CE15E22C8LN pinout EP4CE15E22C8LN datasheet pdf EP4CE15E22C8LN equivalent EP4CE15E22C8LN replacement EP4CE15E22C8LN cross reference EP4CE15E22C8LN vs EP4CE15E22C8N EP4CE15E22C8LN footprint EP4CE15E22C8LN price EP4CE15E22C8LN stock Altera EP4CE15E22C8LN EP4CE15E22C8LN 144 pin EP4CE15E22C8LN industrial control

متعلقہ اجزاء اور اصطلاحات

Altera Intel EP4CE15E22C8LN EP4CE15E22C8N Cyclone IV E EP4CE15 field-programmable gate array FPGA programmable logic logic element logic block block RAM embedded memory EQFP-144 LQFP exposed pad QFN family surface-mount package SMD 1.2 V core supply configurable I/O 60 nm FPGA technology C8 speed grade E22 package configuration Quartus Prime industrial control
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں