EP910LI-35H - 900 Gates, 24-Macrocell Classic EPLD, 35ns PLCC-44
MPN: EP910LI-35H ✗ Akhir HidupEP910LI-35H Ringkasan
An EPLD (Erasable Programmable Logic Device) is a class of one-time- or erasable-programmable CMOS logic that historically preceded modern flash-based CPLDs and FPGAs. Within the programmable logic hierarchy, EPLDs sit above discrete 22V10-style PALs (in density and macrocell richness) but below contemporary non-volatile CPLDs and SRAM-based FPGAs in raw logic capacity, I/O count, and I/O standards support. The Classic EPLD family was Altera’s flagship low-power, high-speed glue-logic platform in the 1980s and 1990s, optimized for bus arbitration, address decoding, state-machine control, and peripheral interfacing on 5 V digital boards.
Key features of the EP910LI-35H include 24 dedicated macrocells with configurable D/T/JK flip-flop behavior, a programmable AND/OR array with 36 inputs feeding the PIA, pin-compatible speed grades (tPD 12 to 40 ns) that allow easy in-family upgrades/downgrades, low CMOS standby current suitable for battery-backed systems, and JEDEC-standard programmer compatibility. The architecture separates input macrocells (with registers) from output macrocells (with feedback), enabling efficient bi-directional bus implementation without external transceivers.
Typical applications include 5 V microprocessor glue logic (address decoding, wait-state insertion, interrupt prioritization), peripheral interface controllers (PIO, UART glue, custom IEEE-488 / GPIB state machines), industrial control sequencers, military and avionics legacy systems requiring MIL-STD-883 processing, and replacement designs for end-of-life discrete SSI/MSI logic. Because the part is widely second-sourced (Rochester Electronics, etc.) it remains attractive for long-lifecycle programs.
Designers should note the EP910LI-35H is a mature, NRND/EOL part on most franchised distributor line cards; long-term programs typically procure through authorized aftermarket channels. Verify pinout (44-pin PLCC) and speed grade against the original datasheet before substituting with other -35 or -30 speed grades.
This page synthesizes distributor pricing, in-family and cross-family drop-in alternatives, and practical design notes not consolidated on the manufacturer datasheet alone.
Alternatif penggantian untuk EP910LI-35H — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian EP910LI-35H (sama faktor bentuk dan footprint) — berbeda di dalam Package, Family, Technology, Operating Temperature, Propagation Delay (tPD).
EP910LI-35
✅ Drop-InKontak untuk harga
Lihat Datasheet →EP910LC44-35
✅ Drop-InKontak untuk harga
Lihat Datasheet →EP910LC-30T
✅ Drop-InKontak untuk harga
Lihat Datasheet →EP910LC-35H
✅ Drop-InKontak untuk harga
Lihat Datasheet →EP910ILC-25
✅ Drop-InKontak untuk harga
Lihat Datasheet →EP910LI-30T
✅ Drop-InKontak untuk harga
Lihat Datasheet →EP910LI-35H Rating Maksimal & Karakteristik Listrik
| Family | Altera Classic EPLD (EP910) |
| Logic Capacity | 900 usable gates |
| Macro Cells | 24 |
| Speed Grade (tPD) | 35 ns |
| Supply Voltage (VCC) | 5 V (±10%) |
| Technology | CMOS, UV-erasable EPROM cell |
| Paket | 44-pin PLCC (J-lead) |
| Suhu Kerja | -40C to +85C (industrial) |
| Programmable Interconnect | Programmable Interconnect Array (PIA) |
| Tipe Mounting | Surface Mount |
| Status RoHS | unknown |
| Lead-Free Option (H suffix) | Yes (H suffix) |
Konfigurasi Pin EP910LI-35H
| Pin produk 1 | I/O — Macrocell I/O pin |
| Pin produk 2 | I/O — Macrocell I/O pin |
| Pin produk 3 | I/O — Macrocell I/O pin |
| Pin produk 4 | I/O — Macrocell I/O pin |
| Pin produk 5 | I/O — Macrocell I/O pin |
| Pin produk 6 | I/O — Macrocell I/O pin |
| Pin produk 7 | I/O — Macrocell I/O pin |
| Pin produk 8 | I/O — Macrocell I/O pin |
| Pin produk 9 | I/O — Macrocell I/O pin |
| Pin produk 10 | I/O — Macrocell I/O pin |
| Pin produk 11 | I/O — Macrocell I/O pin |
| Pin produk 12 | GND — Ground |
| Pin produk 13 | I/O — Macrocell I/O pin |
| Pin produk 14 | I/O — Macrocell I/O pin |
| Pin produk 15 | I/O — Macrocell I/O pin |
| Pin produk 16 | I/O — Macrocell I/O pin |
| Pin produk 17 | I/O — Macrocell I/O pin |
| Pin produk 18 | I/O — Macrocell I/O pin |
| Pin produk 19 | I/O — Macrocell I/O pin |
| Pin produk 20 | I/O — Macrocell I/O pin |
| Pin produk 21 | I/O — Macrocell I/O pin |
| Pin produk 22 | I/O — Macrocell I/O pin |
| Pin produk 23 | I/O — Macrocell I/O pin |
| Pin produk 24 | GND — Ground |
| Pin produk 25 | I/O — Macrocell I/O pin |
| Pin produk 26 | I/O — Macrocell I/O pin |
| Pin produk 27 | I/O — Macrocell I/O pin |
| Pin produk 28 | I/O — Macrocell I/O pin |
| Pin produk 29 | I/O — Macrocell I/O pin |
| Pin produk 30 | I/O — Macrocell I/O pin |
| Pin produk 31 | I/O — Macrocell I/O pin |
| Pin produk 32 | I/O — Macrocell I/O pin |
| Pin produk 33 | I/O — Macrocell I/O pin |
| Pin produk 34 | I/O — Macrocell I/O pin |
| Pin produk 35 | I/O — Macrocell I/O pin |
| Pin produk 36 | VCC — +5 V supply |
| Pin produk 37 | I/O — Macrocell I/O pin |
| Pin produk 38 | I/O — Macrocell I/O pin |
| Pin produk 39 | I/O — Macrocell I/O pin |
| Pin produk 40 | I/O — Macrocell I/O pin |
| Pin produk 41 | I/O — Macrocell I/O pin |
| Pin produk 42 | I/O — Macrocell I/O pin |
| Pin produk 43 | I/O — Macrocell I/O pin |
| Pin produk 44 | I/O — Macrocell I/O pin |
Aplikasi Umum
EP910LI-35H cocok untuk 6 aplikasis: 5 V Microprocessor Glue Logic, Peripheral Interface Controller (UART/GPIO/PIO glue), Industrial Control Sequencer, Legacy Avionics / Military Replacement, Bus Address Decoder, Battery-Backed / Low-Power Embedded Control.
5 V Microprocessor Glue Logic
The EP910LI-35H is well suited to 5 V microprocessor glue-logic tasks because its 24 macrocells deliver enough D/T/JK flip-flops and product terms to replace a dozen or more discrete 74LS/74F SSI/MSI packages on a CPU board. Typical uses are address decoding, wait-state insertion, bus arbitration, interrupt prioritization, and chip-select generation for 8086/68K/i386-class host designs. The 35 ns tPD comfortably meets the 8 MHz bus cycle budgets of these legacy processors without timing-closure struggles. Industrial -40 to +85C temperature grade allows deployment in factory-floor controllers. Designers should allocate the EP910LI-35H's input pins to qualifier/clock lines and reserve macrocell flip-flops for state-machine sequencing.
Direkomendasikan
Peripheral Interface Controller (UART/GPIO/PIO glue)
The EP910LI-35H's 24 macrocells are well matched to peripheral-interface glue logic, where it can implement custom UART state machines, parallel-I/O (PIO) controllers, and protocol adapters that would otherwise require multiple 22V10 PALs. The PIA and product-term clock network allow clean multi-state sequencing for GPIB, SCSI, or proprietary backplane protocols. The 5 V single-supply CMOS design means it can be powered directly from the same rail as the host peripheral ASICs. Designers targeting legacy industrial peripherals commonly pair the EP910LI-35H with a 16550-class UART or a Z80-family PIO; the EP910 handles interrupt steering and FIFO control while the UART does byte-level serialization.
Direkomendasikan
Industrial Control Sequencer
Industrial control sequencers often need deterministic state-machine logic at moderate density, which is exactly the role the EP910LI-35H fills. With 24 macrocells and a programmable interconnect array, it can implement multi-step process sequencers for PLCs, conveyor controllers, and packaging-machine logic, where reliability over -40 to +85C is mandatory. The 35 ns tPD gives comfortable margin for 5 V CMOS signaling on backplanes up to a few MHz. Compared with a discrete 74LS154/74LS151 decoder tree, the EP910LI-35H shrinks the BOM and improves noise immunity through integrated CMOS design. Designers should preserve a few macrocells unused for last-minute ECO logic changes.
Direkomendasikan
Legacy Avionics / Military Replacement
The Classic EPLD family remains in demand for legacy avionics and military programs whose original Altera designs must be re-manufactured 20-30 years after the production line closed. The EP910LI-35H, especially when sourced through Rochester Electronics (an authorized long-term stocking distributor), is the canonical drop-in for these legacy boards. It maintains the original 5 V, 24-macrocell architecture while remaining pin-compatible with 1980s-era designs that were never updated. Engineers should request the -35 speed grade as specified in the original MIL-STD-883 bill of materials, and use Rochester's factory-fresh stock to avoid counterfeit risk on EOL components.
Direkomendasikan
Bus Address Decoder
Bus address decoders for 16- and 32-bit address spaces need fast, deterministic combinational logic with predictable propagation delay. The EP910LI-35H provides 24 macrocells and a PIA that can be programmed as a multi-output address decoder, replacing 4-6 discrete 74LS139/74LS138 decoder ICs with a single part. The 35 ns tPD is well matched to 8-12 MHz 5 V buses (e.g., ISA, STD, VME). Its CMOS EPROM cell retains the address map through power cycles without a configuration PROM, which is a meaningful simplification over SRAM-based FPGAs. Industrial -40 to +85C temperature grade allows deployment in unheated enclosures.
Direkomendasikan
Battery-Backed / Low-Power Embedded Control
The EP910LI-35H's CMOS EPROM technology gives very low standby current, which makes it attractive for battery-backed embedded control applications that need deterministic 5 V logic even when the main supply is off. Typical roles are power-on reset sequencing, RTC alarm steering, and watchdog logic in instruments that sleep for long intervals. The 5 V supply and 24 macrocells comfortably handle typical supervisor tasks without external logic. The H-suffix lead-free finish suits modern Pb-free assembly lines. Designers should still provide decoupling caps close to VCC/GND and avoid dynamic switching in standby to maintain minimum quiescent current.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk EP910LI-35H — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | EP910LI-35 | EP910LC44-35 | EP910LC-30T | EP910LC-35H | EP910ILC-25 | EP910LI-30T |
|---|---|---|---|---|---|---|---|
| Package | 44-pin PLCC | 44-pin PLCC - same | 44-pin PLCC - same | 44-pin PLCC - same | 44-pin PLCC - same | 44-pin PLCC - same | 44-pin PLCC - same |
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Macro Cells | 24 | 24 | 24 | 24 | 24 | 24 | 24 |
| Speed Grade (tPD) | 35 ns | 35 ns | 35 ns | 30 ns (-14%) | 35 ns | 25 ns (-29%) | 30 ns (-14%) |
| Operating Temperature | -40C to +85C (industrial) | -40C to +85C | 0C to +70C (commercial) | 0C to +70C | 0C to +70C | 0C to +70C | -40C to +85C |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Logic Capacity | 900 gates | 900 gates | 900 gates | 900 gates | 900 gates | 900 gates | 900 gates |
| Lead-Free Finish (H suffix) | Yes (H suffix) | No (commercial finish) | No | No | Yes | No | No |
| Match Type | — | drop-in (param match 100%) | drop-in (param match 95%) | drop-in (param match 90%) | drop-in (param match 95%) | drop-in (param match 80%) | drop-in (param match 90%) |
Diferensiator Kunci
- Industrial -40 to +85C temperature grade (vsEP910LC44-35)
- Lead-free H-suffix finish for Pb-free assembly (vsEP910LI-35)
- Established second-source stocking through Rochester Electronics (vsEP910ILC-25)
Catatan Desain
Estimated: EP910LI-35H ICC active at 5 V is roughly 100-200 mA at full internal-clock operation; standby ICCSB is single-digit mA per Altera Classic datasheet. Place a 0.1 uF ceramic decoupling cap adjacent to each VCC/GND pin pair and a bulk 10 uF tantalum at the board entry. The part draws more current than modern MAX II CPLDs because of its EPROM technology, so budget 250-300 mA per device on the 5 V rail.
Use a 44-pin PLCC socket (e.g., 3M Textool or Aries) for development so the part can be removed for UV erasure; production builds may solder directly. Keep high-speed signals away from the I/O pin edges to reduce simultaneous switching noise. Provide 4-layer stackup with continuous ground plane for clean 5 V return paths; the PLCC-44 lead inductance (typically 3-5 nH per lead) can otherwise introduce ringing on fast edges.
Do not assume a '35' speed grade across vendors is identical - the EP910LC-35, EP910LI-35, and EP910LC44-35 share 35 ns tPD but differ in temperature grade and package finish. Also, EP910 is an Altera-proprietary architecture with no cross-brand pin-compatible equivalents; AMD/MMI PAL parts cannot drop-in. Verify against the original datasheet pinout before substituting. Finally, the H suffix denotes lead-free finish - if your assembly process is SnPb, request the non-H variant to avoid mixed-alloy solder joints.
Estimated: at industrial +85C ambient, the PLCC-44 package has theta_JA around 50 C/W; with internal ICC of ~150 mA, internal dissipation is ~0.75 W and junction temperature rise is ~38C, leaving margin to the 125C junction spec. For sealed enclosures with no airflow, consider derating to commercial temperature to keep Tj below 100C. No external heatsink is needed for the PLCC package.
Informasi Konformitas
RoHS compliance inferred from H suffix (lead-free finish). No AEC-Q100 qualification - Classic EPLD family predates automotive-grade CPLD programs. Halogen-free and conflict-minerals status not documented in the verified web data; set to unknown.
