Intel

EPF10K10AQC208-2 - 10K-Gate FLEX-10KA FPGA, 208-PQFP | Intel

MPN: EPF10K10AQC208-2 ✗ Akhir Hidup

3.0 V to 3.6 V Vdss 208-Pin PQFP (BFQFP) 28x28 mm Package 142.86 MHz Speed

Ajukan Diskon

MOQ: 1 |

Lihat Datasheet (PDF) Lihat Alternatif

Kuantitas

EPF10K10AQC208-2 Ringkasan

The Intel EPF10K10AQC208-2 is a member of the FLEX-10KA family of Field-Programmable Gate Arrays (FPGAs) housed in a 208-pin Plastic Quad Flat Pack (PQFP/BFQFP) measuring 28x28 mm. The device integrates 576 logic elements, 72 logic array blocks (LABs), and 134 user I/O pins, with 6144 bits of embedded RAM. It operates from a 3.0 V to 3.6 V supply, uses 0.3 um CMOS SRAM process technology, and supports a maximum internal frequency of 142.86 MHz. Speed grade -2 corresponds to a maximum internal propagation delay in the medium-speed range.

What is an FPGA? A Field-Programmable Gate Array is a semiconductor integrated circuit built around an array of configurable logic blocks (CLBs/LABs), programmable interconnects, and I/O cells, allowing the designer to implement arbitrary digital logic after fabrication. FPGAs occupy the middle ground between fixed-function ASICs and software-programmable microcontrollers, providing hardware-timed parallelism and reprogrammability. The FLEX-10KA family sits within the broader taxonomy of programmable logic devices (PLDs) -> FPGAs -> SRAM-based LUT FPGAs -> legacy/low-density FPGAs, and was historically used for glue logic, bus interfacing, and DSP pre-processing in telecom and industrial systems.

Key features of the EPF10K10AQC208-2 include embedded array blocks (EABs) for memory or multiplier functions, JTAG-compliant boundary-scan test support, in-system programmability via the serial configuration EPROM interface, and 5V-tolerant I/O on selected pins. Each LAB combines 8 logic elements with a carry chain, while each EAB provides up to 2048 bits of dual-port RAM.

Architecture: the FLEX-10KA device fabric uses a four-input look-up table (LUT) per logic element, fast row-and-column interconnect, and dedicated carry chains for arithmetic. The 0.3 um process delivers predictable timing closure for designs up to several thousand gates, with the FastTrack interconnect minimizing routing congestion.

Typical applications include legacy industrial control, telecom glue logic, prototyping interfaces to legacy buses (PCI, ISA, VME), DSP pre-processing, and educational platforms. The 208-pin PQFP footprint is still widely supported in long-lifecycle industrial designs.

Design consideration: the EPF10K10AQC208-2 requires an external configuration EPROM (EPC1/EPC2) on every power-up, since the SRAM-based fabric is volatile; designers must budget for the configuration circuit and the POR (power-on reset) timing.

This page synthesizes distributor pricing, FLEX-10KA family variants, and practical configuration/design notes that go beyond what is printed in the original Altera FLEX-10KA datasheet.

Alternatif penggantian untuk EPF10K10AQC208-2 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian EPF10K10AQC208-2 (sama faktor bentuk dan footprint) — berbeda di dalam Package, Family, Process Technology, Speed Grade, Configuration Method.

EPF10K10AQC208-3

Altera

Package: 208-BQFP / 208-PQFP, 0.5 mm pitch, gull-wing

Family: FLEX 10KA Embedded Programmable Logic Device

Process Technology: 0.42 µm CMOS SRAM