Intel

EPF6016QC240-2 - FLEX 6000 FPGA, 16K Gates, 240-Pin PQFP | Intel

MPN: EPF6016QC240-2 ✗ Akhir Hidup

5 V Vdss 240-pin PQFP / BFQFP (QFP-240) Package 125 MHz (typical), up to 172 MHz Speed

Ajukan Diskon

MOQ: 1 |

Lihat Datasheet (PDF) Lihat Alternatif

Kuantitas

EPF6016QC240-2 Ringkasan

The Intel EPF6016QC240-2 is a FLEX 6000 family Field Programmable Gate Array (FPGA) delivering 16,000 typical gates (with up to 24,000 maximum system gates), 1,320 logic elements distributed across 132 Logic Array Blocks (LABs), and 199 user I/Os, housed in a 240-pin Plastic Quad Flat Pack (PQFP / BFQFP) package. It is built on a 0.42 micrometer CMOS SRAM process with four layers of metal interconnect, supports a 5 V supply core, and is specified to operate over the commercial 0 to 85 degrees C temperature range.

An FPGA (Field Programmable Gate Array) is a type of programmable logic device (PLD) that combines the density of a gate array with the flexibility of in-system programmability. Hierarchically, an FPGA sits above a CPLD (Complex Programmable Logic Device), below a structured ASIC, and within the broader family of programmable logic devices; FPGAs are widely used for glue logic, state-machine control, bus interfacing, and high-volume prototyping in lieu of gate arrays. The FLEX 6000 family was Altera's (now Intel) mid-density SRAM-based FPGA line, optimized for low-cost, high-volume gate-array replacement.

Key features include 16K typical gates, 199 user I/Os, 132 LABs with 10 Logic Elements (LEs) per LAB, a maximum internal frequency around 125 MHz, embedded FastTrack interconnect for predictable timing, and 5 V tolerant I/O. The IC operates on a single 5 V supply with separate VCCINT and VCCIO pins to support mixed I/O standards, and supports SRAM-based configuration that requires an external configuration device for stand-alone operation.

Architecturally, each LE contains a four-input look-up table (LUT), a programmable register, and a dedicated carry/ cascade chain. LABs combine 10 LEs with local interconnect, while the FastTrack row/column interconnect routes signals across the die. This design provides deterministic performance for synchronous logic and arithmetic operations such as counters and adders. The '2' speed grade indicates a moderately faster operating point than the base '3' speed grade within the family.

Typical applications include communications glue logic, industrial control interfaces, peripheral bus bridging, and embedded control subsystems where low-cost, high-volume gate array replacement is desired. Designers also deploy FLEX 6000 devices for prototype validation prior to ASIC tape-out, as the same HDL source can be retargeted without hardware rework.

When designing with the EPF6016QC240-2, ensure the configuration scheme (typically EPC2 or EPC1) is correctly selected and that JTAG pins (TDI, TDO, TMS, TCK) are accessible for in-system programming. Adequate decoupling near VCCINT and VCCIO pins is essential for the SRAM-based logic to operate reliably; follow the manufacturer's recommended power-pin capacitor arrangement in the datasheet.

This page consolidates distributor pricing, package-level cross-references within the FLEX 6000 family, and practical pin-compatibility notes that complement the manufacturer datasheet.

Alternatif penggantian untuk EPF6016QC240-2 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian EPF6016QC240-2 (sama faktor bentuk dan footprint) — berbeda di dalam Operating Temperature, Package, Mounting Type, Speed Grade, Supply Voltage.

EPF6016QC240

Intel

Package: 240-pin BFQFP / PQFP

Mounting Type: Surface Mount