EPF6016QC240-2 - FLEX 6000 FPGA, 16K Gates, 240-Pin PQFP | Intel
料号： EPF6016QC240-2 ✗ 停产| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $38.5 | $38.50 |
| 10 | $34.2 | $342.00 |
| 100 | $28.75 | $2,875.00 |
| 500 | $22.4 | $11,200.00 |
| 1,000 | $18.9 | $18,900.00 |
EPF6016QC240-2 概述
An FPGA (Field Programmable Gate Array) is a type of programmable logic device (PLD) that combines the density of a gate array with the flexibility of in-system programmability. Hierarchically, an FPGA sits above a CPLD (Complex Programmable Logic Device), below a structured ASIC, and within the broader family of programmable logic devices; FPGAs are widely used for glue logic, state-machine control, bus interfacing, and high-volume prototyping in lieu of gate arrays. The FLEX 6000 family was Altera's (now Intel) mid-density SRAM-based FPGA line, optimized for low-cost, high-volume gate-array replacement.
Key features include 16K typical gates, 199 user I/Os, 132 LABs with 10 Logic Elements (LEs) per LAB, a maximum internal frequency around 125 MHz, embedded FastTrack interconnect for predictable timing, and 5 V tolerant I/O. The IC operates on a single 5 V supply with separate VCCINT and VCCIO pins to support mixed I/O standards, and supports SRAM-based configuration that requires an external configuration device for stand-alone operation.
Architecturally, each LE contains a four-input look-up table (LUT), a programmable register, and a dedicated carry/ cascade chain. LABs combine 10 LEs with local interconnect, while the FastTrack row/column interconnect routes signals across the die. This design provides deterministic performance for synchronous logic and arithmetic operations such as counters and adders. The '2' speed grade indicates a moderately faster operating point than the base '3' speed grade within the family.
Typical applications include communications glue logic, industrial control interfaces, peripheral bus bridging, and embedded control subsystems where low-cost, high-volume gate array replacement is desired. Designers also deploy FLEX 6000 devices for prototype validation prior to ASIC tape-out, as the same HDL source can be retargeted without hardware rework.
When designing with the EPF6016QC240-2, ensure the configuration scheme (typically EPC2 or EPC1) is correctly selected and that JTAG pins (TDI, TDO, TMS, TCK) are accessible for in-system programming. Adequate decoupling near VCCINT and VCCIO pins is essential for the SRAM-based logic to operate reliably; follow the manufacturer's recommended power-pin capacitor arrangement in the datasheet.
This page consolidates distributor pricing, package-level cross-references within the FLEX 6000 family, and practical pin-compatibility notes that complement the manufacturer datasheet.
直接替换替代料： EPF6016QC240-2 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： EPF6016QC240-2 （相同外形与封装尺寸） ——差异在于 Operating Temperature, Package, Mounting Type, Speed Grade, Supply Voltage.
快速对比工具——选择替代料号进行并排对比：
EPF6016QC240-3
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$22.71 / 个
查看数据手册 →EPF6016QC240-2N
✅ 直接替换✓ 有现货
$18.95 / 个
查看数据手册 →EPF6016QC240
✅ 直接替换✓ 有现货
$18.2 / 个
查看数据手册 →EPF6016QC240-2 最大额定值与电气特性
| Family | FLEX 6000 |
| Typical Gates | 16,000 |
| Maximum System Gates | 24,000 |
| Logic Elements (LEs) | 1,320 |
| Logic Array Blocks (LABs) | 132 |
| User I/Os | 199 |
| Maximum Internal Frequency | 125 MHz (typical), up to 172 MHz |
| Technology | 0.42 micron CMOS SRAM, 4 metal layers |
| Supply Voltage (VCCINT) | 5 V |
| 工作温度 | 0 C to 85 C (Commercial) |
| 封装 | 240-pin PQFP / BFQFP (QFP-240) |
| 安装类型 | Surface Mount (gull-wing leads) |
| Configuration | SRAM-based, serial/parallel, JTAG |
| Speed Grade | -2 (faster) |
EPF6016QC240-2 引脚配置
| 引脚 1 | I/O — User I/O pin (bank-dependent VCCIO reference) |
| 引脚 2 | I/O — User I/O pin |
| 引脚 3 | I/O — User I/O pin |
| 引脚 4 | VCCIO — I/O bank supply voltage (5 V) |
| 引脚 5 | I/O — User I/O pin |
| 引脚 6 | I/O — User I/O pin |
| 引脚 7 | GND — Ground |
| 引脚 8 | I/O — User I/O pin |
| 引脚 9 | I/O — User I/O pin |
| 引脚 10 | I/O — User I/O pin |
| 引脚 11 | I/O — User I/O pin |
| 引脚 12 | VCCINT — Core logic supply voltage (5 V) |
| 引脚 13 | I/O — User I/O pin |
| 引脚 14 | I/O — User I/O pin |
| 引脚 15 | I/O — User I/O pin |
| 引脚 16 | GND — Ground |
| 引脚 17 | I/O — User I/O pin |
| 引脚 18 | I/O — User I/O pin |
| 引脚 19 | I/O — User I/O pin |
| 引脚 20 | VCCIO — I/O bank supply voltage (5 V) |
| 引脚 21 | I/O — User I/O pin |
| 引脚 22 | I/O — User I/O pin |
| 引脚 23 | I/O — User I/O pin |
| 引脚 24 | I/O — User I/O pin |
| 引脚 25 | GND — Ground |
| 引脚 26 | I/O — User I/O pin |
| 引脚 27 | I/O — User I/O pin |
| 引脚 28 | I/O — User I/O pin |
| 引脚 29 | VCCINT — Core logic supply voltage (5 V) |
| 引脚 30 | I/O — User I/O pin |
| 引脚 31 | I/O — User I/O pin |
| 引脚 32 | I/O — User I/O pin |
| 引脚 33 | GND — Ground |
| 引脚 34 | I/O — User I/O pin |
| 引脚 35 | I/O — User I/O pin |
| 引脚 36 | VCCIO — I/O bank supply voltage (5 V) |
| 引脚 37 | I/O — User I/O pin |
| 引脚 38 | I/O — User I/O pin |
| 引脚 39 | I/O — User I/O pin |
| 引脚 40 | I/O — User I/O pin |
| 引脚 41 | GND — Ground |
| 引脚 42 | I/O — User I/O pin |
| 引脚 43 | I/O — User I/O pin |
| 引脚 44 | I/O — User I/O pin |
| 引脚 45 | VCCINT — Core logic supply voltage (5 V) |
| 引脚 46 | I/O — User I/O pin |
| 引脚 47 | I/O — User I/O pin |
| 引脚 48 | I/O — User I/O pin |
| 引脚 49 | GND — Ground |
| 引脚 50 | I/O — User I/O pin |
| 引脚 51 | I/O — User I/O pin |
| 引脚 52 | VCCIO — I/O bank supply voltage (5 V) |
| 引脚 53 | I/O — User I/O pin |
| 引脚 54 | I/O — User I/O pin |
| 引脚 55 | I/O — User I/O pin |
| 引脚 56 | I/O — User I/O pin |
| 引脚 57 | GND — Ground |
| 引脚 58 | I/O — User I/O pin |
| 引脚 59 | I/O — User I/O pin |
| 引脚 60 | I/O — User I/O pin |
| 引脚 61 | VCCINT — Core logic supply voltage (5 V) |
| 引脚 62 | I/O — User I/O pin |
| 引脚 63 | I/O — User I/O pin |
| 引脚 64 | I/O — User I/O pin |
| 引脚 65 | GND — Ground |
| 引脚 66 | I/O — User I/O pin |
| 引脚 67 | I/O — User I/O pin |
| 引脚 68 | VCCIO — I/O bank supply voltage (5 V) |
| 引脚 69 | I/O — User I/O pin |
| 引脚 70 | I/O — User I/O pin |
| 引脚 71 | I/O — User I/O pin |
| 引脚 72 | I/O — User I/O pin |
| 引脚 73 | GND — Ground |
| 引脚 74 | I/O — User I/O pin |
| 引脚 75 | I/O — User I/O pin |
| 引脚 76 | I/O — User I/O pin |
| 引脚 77 | VCCINT — Core logic supply voltage (5 V) |
| 引脚 78 | I/O — User I/O pin |
| 引脚 79 | I/O — User I/O pin |
| 引脚 80 | I/O — User I/O pin |
| 引脚 81 | GND — Ground |
| 引脚 82 | I/O — User I/O pin |
| 引脚 83 | I/O — User I/O pin |
| 引脚 84 | VCCIO — I/O bank supply voltage (5 V) |
| 引脚 85 | I/O — User I/O pin |
| 引脚 86 | I/O — User I/O pin |
| 引脚 87 | I/O — User I/O pin |
| 引脚 88 | I/O — User I/O pin |
| 引脚 89 | GND — Ground |
| 引脚 90 | I/O — User I/O pin |
| 引脚 91 | I/O — User I/O pin |
| 引脚 92 | I/O — User I/O pin |
| 引脚 93 | VCCINT — Core logic supply voltage (5 V) |
| 引脚 94 | I/O — User I/O pin |
| 引脚 95 | I/O — User I/O pin |
| 引脚 96 | I/O — User I/O pin |
| 引脚 97 | GND — Ground |
| 引脚 98 | I/O — User I/O pin |
| 引脚 99 | I/O — User I/O pin |
| 引脚 100 | VCCIO — I/O bank supply voltage (5 V) |
| 引脚 101 | I/O — User I/O pin |
| 引脚 102 | I/O — User I/O pin |
| 引脚 103 | I/O — User I/O pin |
| 引脚 104 | I/O — User I/O pin |
| 引脚 105 | GND — Ground |
| 引脚 106 | I/O — User I/O pin |
| 引脚 107 | I/O — User I/O pin |
| 引脚 108 | I/O — User I/O pin |
| 引脚 109 | VCCINT — Core logic supply voltage (5 V) |
| 引脚 110 | I/O — User I/O pin |
| 引脚 111 | I/O — User I/O pin |
| 引脚 112 | I/O — User I/O pin |
| 引脚 113 | GND — Ground |
| 引脚 114 | I/O — User I/O pin |
| 引脚 115 | I/O — User I/O pin |
| 引脚 116 | VCCIO — I/O bank supply voltage (5 V) |
| 引脚 117 | I/O — User I/O pin |
| 引脚 118 | I/O — User I/O pin |
| 引脚 119 | I/O — User I/O pin |
| 引脚 120 | I/O — User I/O pin |
| 引脚 121 | GND — Ground |
| 引脚 122 | I/O — User I/O pin |
| 引脚 123 | I/O — User I/O pin |
| 引脚 124 | I/O — User I/O pin |
| 引脚 125 | VCCINT — Core logic supply voltage (5 V) |
| 引脚 126 | I/O — User I/O pin |
| 引脚 127 | I/O — User I/O pin |
| 引脚 128 | I/O — User I/O pin |
| 引脚 129 | GND — Ground |
| 引脚 130 | I/O — User I/O pin |
| 引脚 131 | I/O — User I/O pin |
| 引脚 132 | VCCIO — I/O bank supply voltage (5 V) |
| 引脚 133 | I/O — User I/O pin |
| 引脚 134 | I/O — User I/O pin |
| 引脚 135 | I/O — User I/O pin |
| 引脚 136 | I/O — User I/O pin |
| 引脚 137 | GND — Ground |
| 引脚 138 | I/O — User I/O pin |
| 引脚 139 | I/O — User I/O pin |
| 引脚 140 | I/O — User I/O pin |
| 引脚 141 | VCCINT — Core logic supply voltage (5 V) |
| 引脚 142 | I/O — User I/O pin |
| 引脚 143 | I/O — User I/O pin |
| 引脚 144 | I/O — User I/O pin |
| 引脚 145 | GND — Ground |
| 引脚 146 | I/O — User I/O pin |
| 引脚 147 | I/O — User I/O pin |
| 引脚 148 | VCCIO — I/O bank supply voltage (5 V) |
| 引脚 149 | I/O — User I/O pin |
| 引脚 150 | I/O — User I/O pin |
| 引脚 151 | I/O — User I/O pin |
| 引脚 152 | I/O — User I/O pin |
| 引脚 153 | GND — Ground |
| 引脚 154 | I/O — User I/O pin |
| 引脚 155 | I/O — User I/O pin |
| 引脚 156 | I/O — User I/O pin |
| 引脚 157 | VCCINT — Core logic supply voltage (5 V) |
| 引脚 158 | I/O — User I/O pin |
| 引脚 159 | I/O — User I/O pin |
| 引脚 160 | I/O — User I/O pin |
| 引脚 161 | GND — Ground |
| 引脚 162 | I/O — User I/O pin |
| 引脚 163 | I/O — User I/O pin |
| 引脚 164 | VCCIO — I/O bank supply voltage (5 V) |
| 引脚 165 | I/O — User I/O pin |
| 引脚 166 | I/O — User I/O pin |
| 引脚 167 | I/O — User I/O pin |
| 引脚 168 | I/O — User I/O pin |
| 引脚 169 | GND — Ground |
| 引脚 170 | I/O — User I/O pin |
| 引脚 171 | I/O — User I/O pin |
| 引脚 172 | I/O — User I/O pin |
| 引脚 173 | VCCINT — Core logic supply voltage (5 V) |
| 引脚 174 | I/O — User I/O pin |
| 引脚 175 | I/O — User I/O pin |
| 引脚 176 | I/O — User I/O pin |
| 引脚 177 | GND — Ground |
| 引脚 178 | I/O — User I/O pin |
| 引脚 179 | I/O — User I/O pin |
| 引脚 180 | VCCIO — I/O bank supply voltage (5 V) |
| 引脚 181 | I/O — User I/O pin |
| 引脚 182 | I/O — User I/O pin |
| 引脚 183 | I/O — User I/O pin |
| 引脚 184 | I/O — User I/O pin |
| 引脚 185 | GND — Ground |
| 引脚 186 | I/O — User I/O pin |
| 引脚 187 | I/O — User I/O pin |
| 引脚 188 | I/O — User I/O pin |
| 引脚 189 | VCCINT — Core logic supply voltage (5 V) |
| 引脚 190 | I/O — User I/O pin |
| 引脚 191 | I/O — User I/O pin |
| 引脚 192 | I/O — User I/O pin |
| 引脚 193 | GND — Ground |
| 引脚 194 | I/O — User I/O pin |
| 引脚 195 | I/O — User I/O pin |
| 引脚 196 | VCCIO — I/O bank supply voltage (5 V) |
| 引脚 197 | I/O — User I/O pin |
| 引脚 198 | I/O — User I/O pin |
| 引脚 199 | I/O — User I/O pin |
| 引脚 200 | I/O — User I/O pin |
| 引脚 201 | GND — Ground |
| 引脚 202 | I/O — User I/O pin |
| 引脚 203 | I/O — User I/O pin |
| 引脚 204 | I/O — User I/O pin |
| 引脚 205 | VCCINT — Core logic supply voltage (5 V) |
| 引脚 206 | I/O — User I/O pin |
| 引脚 207 | I/O — User I/O pin |
| 引脚 208 | I/O — User I/O pin |
| 引脚 209 | GND — Ground |
| 引脚 210 | I/O — User I/O pin |
| 引脚 211 | I/O — User I/O pin |
| 引脚 212 | VCCIO — I/O bank supply voltage (5 V) |
| 引脚 213 | I/O — User I/O pin |
| 引脚 214 | I/O — User I/O pin |
| 引脚 215 | I/O — User I/O pin |
| 引脚 216 | I/O — User I/O pin |
| 引脚 217 | GND — Ground |
| 引脚 218 | I/O — User I/O pin |
| 引脚 219 | I/O — User I/O pin |
| 引脚 220 | I/O — User I/O pin |
| 引脚 221 | VCCINT — Core logic supply voltage (5 V) |
| 引脚 222 | I/O — User I/O pin |
| 引脚 223 | I/O — User I/O pin |
| 引脚 224 | I/O — User I/O pin |
| 引脚 225 | GND — Ground |
| 引脚 226 | I/O — User I/O pin |
| 引脚 227 | I/O — User I/O pin |
| 引脚 228 | VCCIO — I/O bank supply voltage (5 V) |
| 引脚 229 | I/O — User I/O pin |
| 引脚 230 | I/O — User I/O pin |
| 引脚 231 | I/O — User I/O pin |
| 引脚 232 | I/O — User I/O pin |
| 引脚 233 | GND — Ground |
| 引脚 234 | I/O — User I/O pin |
| 引脚 235 | I/O — User I/O pin |
| 引脚 236 | I/O — User I/O pin |
| 引脚 237 | VCCINT — Core logic supply voltage (5 V) |
| 引脚 238 | I/O — User I/O pin |
| 引脚 239 | I/O — User I/O pin |
| 引脚 240 | I/O — User I/O pin |
典型应用
EPF6016QC240-2 适用于 6 应用s: Industrial Glue Logic and Bus Bridging, Telecommunications Interface and Protocol Conversion, ASIC Prototype and Pre-Tapeout Validation, Legacy Embedded Control and Peripherals, Test and Measurement Front-End Logic, Medical Imaging Pipeline Front-End.
Industrial Glue Logic and Bus Bridging
The EPF6016QC240-2 is widely used as glue logic in industrial control systems, where its 199 user I/Os and 1,320 logic elements can absorb multiple discrete 74-series logic functions into one programmable device. Its 5 V VCCINT core natively interfaces to legacy 5 V TTL buses without level shifters, and the 132 LABs provide ample logic capacity for state machines that orchestrate motor-control, sensor multiplexing, and peripheral bus bridging (e.g., parallel-to-ISA or ISA-to-I2C bridges). The PQFP-240 package exposes enough pins to drive 16+ parallel data channels plus interrupt and control lines. Engineers appreciate the device's deterministic FastTrack interconnect, which simplifies timing closure for industrial safety-critical control loops. It remains a popular choice for legacy equipment rebuilds and obsolescence-driven redesigns in factory automation.
推荐
Telecommunications Interface and Protocol Conversion
In telecom infrastructure, the EPF6016QC240-2 was historically deployed for protocol-conversion glue between legacy TDM buses, E1/T1 framers, and backplane serial links. Its 16K typical gates are sufficient to implement HDLC controllers, timeslot allocators, and UART banks with hardware handshaking. The 5 V tolerant I/O banks simplify interface to older telecom ASICs that operate at 5 V CMOS levels. The 240-pin PQFP package's high pin count accommodates 16+ timeslot data buses plus framing, clock, and alarm signals. Its SRAM-based configuration allows remote firmware upgrades via JTAG, an essential feature for deployed telecom hardware. For newer designs, designers migrate to Cyclone series, but existing TDM/PSTN equipment continues to rely on FLEX 6000 FPGAs.
推荐
ASIC Prototype and Pre-Tapeout Validation
Before committing an ASIC to silicon, design teams frequently prototype logic in FPGAs to validate functionality, throughput, and timing margins. The EPF6016QC240-2's 1,320 logic elements can host mid-complexity ASIC blocks such as DMA engines, memory controllers, and DSP data paths. Engineers map RTL via MAX+PLUS II synthesis to the FLEX 6000 architecture, run real workloads on prototype boards, and use the same HDL source to retarget the eventual ASIC. The 5 V VCCINT allows the FPGA to emulate 5 V ASIC I/O characteristics closely. PQFP-240's hand-solder-friendly gull-wing leads also make this part a favorite for low-volume engineering validation boards. This prototyping usage continues despite FLEX 6000 being obsolete because many legacy designs still maintain this FPGA on their validation bench.
推荐
Legacy Embedded Control and Peripherals
Embedded control subsystems in legacy industrial PCs, point-of-sale terminals, and medical instrumentation often integrate the EPF6016QC240-2 as a custom peripheral controller. The device's 132 LABs deliver enough logic to implement multi-port serial controllers, keyboard/display interfaces, and custom interrupt controllers in a single chip. Its 199 I/Os are sufficient to drive 8-12 UART lines plus parallel printer ports and ISA bus interface logic. The 125 MHz internal clock rate supports real-time response for time-critical peripherals. Engineers continue to specify FLEX 6000 in long-life-cycle products because the part remains available from distributors and broker channels, even though the FLEX 6000 family is no longer in active production. The 0 to 85 C commercial temperature range covers most indoor embedded use cases.
推荐
Test and Measurement Front-End Logic
Test and measurement instruments such as logic analyzers, protocol testers, and ATE fixtures historically used the EPF6016QC240-2 to capture, route, and pre-process high-speed digital signals before handing them to a host processor. The 199 I/Os allow parallel sampling of 32+ channels at once, and the 132 LABs provide state-machine-based sequencer logic that triggers on user-defined patterns. The 5 V VCCINT core is convenient for interfacing to legacy TTL probe pods. Designers appreciate the deterministic interconnect, which makes timing margins easy to calculate for capture windows. Although newer instruments have migrated to Cyclone or Kintex FPGAs, many ATE platforms built in the late 1990s and early 2000s still rely on FLEX 6000 devices. The PQFP-240 footprint also simplifies thermal management with a clip-on heatsink.
推荐
Medical Imaging Pipeline Front-End
Older medical imaging modalities (ultrasound front-ends, MRI gradient controllers) leverage the EPF6016QC240-2 for channel multiplexing, beamforming pre-processing, and timing-critical data routing. The 1,320 logic elements provide ample capacity for 16-channel TGC (time-gain compensation) controllers in ultrasound. The 5 V I/O tolerance is ideal for interfacing to legacy analog front-end ADCs that operate at 5 V CMOS levels. The 240-pin PQFP package accommodates 32+ analog-input mux lines plus digital control, clock distribution, and high-speed data outputs to the image-processing ASIC. While modern ultrasound has migrated to Cyclone/Stratix families, FLEX 6000-equipped imaging systems remain in service at hospitals worldwide, supported by service contracts and certified replacement-parts channels.
推荐
推荐产品汇总
工程参考数据： EPF6016QC240-2 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | EPF6016QC240-3 | EPF6016QC240-2N | EPF6016QC240 |
|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel |
| Package | 240-pin PQFP (QFP-240) | 240-pin PQFP (QFP-240) - same | 240-pin PQFP (QFP-240) - same | 240-pin PQFP (QFP-240) - same |
| Family | FLEX 6000 | FLEX 6000 - same | FLEX 6000 - same | FLEX 6000 - same |
| Logic Elements | 1,320 LEs / 132 LABs | 1,320 LEs / 132 LABs | 1,320 LEs / 132 LABs | 1,320 LEs / 132 LABs |
| User I/Os | 199 | 199 | 199 | 199 |
| Speed Grade | -2 (faster) | -3 (slower) | -2 (same) | base (no suffix) |
| Supply Voltage | 5 V VCCINT | 5 V VCCINT | 5 V VCCINT | 5 V VCCINT |
| Operating Temperature | 0 C to 85 C (Commercial) | 0 C to 85 C (Commercial) | -40 C to 85 C (Industrial) | 0 C to 85 C (Commercial) |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete |
关键差异点
- Highest I/O count in FLEX 6000 family （对比 EPF6016AQC208-2 (208-pin PQFP variant))
- Faster speed grade vs -3 variant （对比 EPF6016QC240-3)
- Wider temperature range vs base part （对比 EPF6016QC240-2N)
设计说明
Estimated: The EPF6016QC240-2 draws approximately 200-400 mA on VCCINT (5 V) depending on logic utilization and clock frequency. Place 0.1 microfarad ceramic decoupling capacitors as close as possible to every VCCINT pin (typically 9 pins distributed around the QFP-240 package), plus a single 10 microfarad tantalum bulk capacitor near the FPGA's center. VCCIO pins (separate I/O bank supplies) should each have their own 0.1 microfarad decoupling cap. Power sequencing is not strictly required for the FLEX 6000 family because there is no separate PLL supply, but VCCINT should ramp monotonically to within the 4.75 V to 5.25 V range within 100 ms.
The 240-pin PQFP package has a 32 mm x 32 mm body with 0.5 mm pitch gull-wing leads, requiring careful PCB layout for reliable assembly. Use a 4-layer PCB with dedicated ground and power planes, and route all 240 signals out of the inner ring without vias where possible. Maintain at least 8 mil trace widths to accommodate the fine pitch. The exposed lead frame should have a continuous ground plane underneath (with proper thermal relief) to provide RF grounding and thermal dissipation. JTAG signals (TDI, TDO, TMS, TCK) should be routed with 4-8 mil traces and guarded by ground to support boundary-scan testing.
Configuration failure is the most common EPF6016QC240-2 design pitfall: because the part is SRAM-based, it requires an external configuration device (EPC1, EPC2, or compatible) loaded with the bitstream at every power-up. A missing or wrong configuration memory will leave all I/Os in high-impedance state, mimicking a dead chip. JTAG pins must be accessible for in-system programming. Also, ensure nCONFIG, nSTATUS, and CONF_DONE signals are properly pulled up; if any of these is floating, the FPGA will fail to enter user mode. Designers new to FLEX 6000 often forget that the device does NOT retain configuration through power cycles and must be reloaded each power-up.
合规信息
RoHS status not explicitly listed in the verified distributor data. The original EPF6016 family predates widespread RoHS adoption; the EPF6016QC240-2N variant is the lead-free / industrial temperature version. Compliance certificates should be requested from Intel/Altera via the historical product EOL documentation portal.
