EPM5192AQI100-15 - 192-Macrocell MAX 5000 PLD, 15ns, PQFP-100
MPN: EPM5192AQI100-15 ✗ Akhir HidupEPM5192AQI100-15 Ringkasan
What is a MAX 5000 EPLD? An EPLD (Erasable Programmable Logic Device) is a non-volatile, one-time-programmable (OTP) variant of a PLD that combines multiple PAL-like macrocells with a global interconnect matrix, occupying the mid-density position between classic PAL/GAL devices and modern FPGAs. The MAX 5000 family specifically targets glue-logic integration, bus decoding, state-machine control, and peripheral interfacing where deterministic 15 ns timing and zero in-system reprogrammability are acceptable.
Key features of the EPM5192AQI100-15 include 192 macrocells (384 product terms equivalent), 64 user I/O with 5V-tolerant interfaces, 7 dedicated input pins (total 72 logical inputs to the PIA), a 25 ns worst-case pin-to-pin propagation delay for the -15 speed grade, a 15 ns typical tpd, and 100% TTL-compatible I/O. The industrial (-15 I/Q) temperature range covers -40C to +85C, making this part suitable for factory-floor and outdoor-cabinet designs.
Architecturally, the device uses a Product Term Sharing Architecture (PTSA) where each macrocell can borrow unused product terms from neighboring macrocells, improving utilization over earlier PAL/GAL architectures. The PIA routes any LAB to any other LAB with a uniform predictable delay, simplifying timing closure. Programming is performed via a JTAG-style or legacy Altera programming algorithm using the MasterBlaster, ByteBlasterMV, or universal USB-Blaster hardware.
Typical applications include peripheral bus decoders (PCI/ISA glue logic), high-speed state machines, address decoding for 8/16/32-bit microprocessors, replacement of discrete 74LS/74F TTL logic, motor control sequencers, and industrial automation controllers. The 15 ns tpd comfortably drives 50 MHz synchronous logic with one clock of margin.
When designing with the EPM5192AQI100-15, remember that the 'I' suffix denotes industrial temperature grade and the '15' denotes the speed grade in nanoseconds. Ensure all unused I/O pins are left floating or tied to a defined logic level through the Quartus/MAX+PLUS II software configuration to minimize quiescent current and AC noise injection.
This page consolidates datasheet specifications, drop-in same-package alternatives, and application guidance curated by XAIPART engineers - synthesized content not found in the original Altera datasheet alone.
Alternatif penggantian untuk EPM5192AQI100-15 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian EPM5192AQI100-15 (sama faktor bentuk dan footprint) — berbeda di dalam Package, Device Type, Technology, Mounting Type, Family.
EPM5192AQI100-20
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPM5192AQC100-15
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPM5192AQC100-20
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPM5192AQM100-15
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPM5192AQI100-15 Rating Maksimal & Karakteristik Listrik
| Family | MAX 5000 |
| Series | MAX® 5000 EPLD |
| Device Type | OT PLD (One-Time-Programmable EPLD), CMOS |
| Macrocells | 192 |
| Logic Array Blocks (LABs) | 12 |
| Programmable I/O Lines | 64 |
| Dedicated Inputs | 7 |
| Total Logical Inputs | 72 |
| Propagation Delay (tpd) | 15 ns (speed grade -15) |
| Propagation Delay (max datasheet) | 25 ns |
| Maximum Internal Frequency | 83.3 MHz |
| Paket | PQFP-100 (R-PQFP-G100), 100-pin Plastic Quad Flat Pack |
| Operating Temperature Grade | Industrial (-40C to +85C) - 'I' suffix |
| Programming Method | JTAG via Altera programming hardware (ByteBlasterMV, USB-Blaster) |
| Technology | CMOS, EPROM-based (UV-erasable on windowed versions, OTP on this part) |
Konfigurasi Pin EPM5192AQI100-15
| Pin produk 1 | I/O — User I/O - bidirectional logic pin (shared with macrocell) |
| Pin produk 2 | I/O — User I/O - bidirectional logic pin |
| Pin produk 3 | I/O — User I/O - bidirectional logic pin |
| Pin produk 4 | I/O — User I/O - bidirectional logic pin |
| Pin produk 5 | I/O — User I/O - bidirectional logic pin |
| Pin produk 6 | I/O — User I/O - bidirectional logic pin |
| Pin produk 7 | I/O — User I/O - bidirectional logic pin |
| Pin produk 8 | I/O — User I/O - bidirectional logic pin |
| Pin produk 9 | GND — Ground reference |
| Pin produk 10 | I/O — User I/O - bidirectional logic pin |
| Pin produk 11 | I/O — User I/O - bidirectional logic pin |
| Pin produk 12 | I/O — User I/O - bidirectional logic pin |
| Pin produk 13 | I/O — User I/O - bidirectional logic pin |
| Pin produk 14 | I/O — User I/O - bidirectional logic pin |
| Pin produk 15 | I/O — User I/O - bidirectional logic pin |
| Pin produk 16 | I/O — User I/O - bidirectional logic pin |
| Pin produk 17 | I/O — User I/O - bidirectional logic pin |
| Pin produk 18 | I/O — User I/O - bidirectional logic pin |
| Pin produk 19 | I/O — User I/O - bidirectional logic pin |
| Pin produk 20 | I/O — User I/O - bidirectional logic pin |
| Pin produk 21 | I/O — User I/O - bidirectional logic pin |
| Pin produk 22 | I/O — User I/O - bidirectional logic pin |
| Pin produk 23 | I/O — User I/O - bidirectional logic pin |
| Pin produk 24 | I/O — User I/O - bidirectional logic pin |
| Pin produk 25 | I/O — User I/O - bidirectional logic pin |
| Pin produk 26 | VCC — +5V supply voltage |
| Pin produk 27 | I/O — User I/O - bidirectional logic pin |
| Pin produk 28 | I/O — User I/O - bidirectional logic pin |
| Pin produk 29 | I/O — User I/O - bidirectional logic pin |
| Pin produk 30 | I/O — User I/O - bidirectional logic pin |
| Pin produk 31 | I/O — User I/O - bidirectional logic pin |
| Pin produk 32 | I/O — User I/O - bidirectional logic pin |
| Pin produk 33 | I/O — User I/O - bidirectional logic pin |
| Pin produk 34 | I/O — User I/O - bidirectional logic pin |
| Pin produk 35 | I/O — User I/O - bidirectional logic pin |
| Pin produk 36 | I/O — User I/O - bidirectional logic pin |
| Pin produk 37 | I/O — User I/O - bidirectional logic pin |
| Pin produk 38 | I/O — User I/O - bidirectional logic pin |
| Pin produk 39 | I/O — User I/O - bidirectional logic pin |
| Pin produk 40 | I/O — User I/O - bidirectional logic pin |
| Pin produk 41 | I/O — User I/O - bidirectional logic pin |
| Pin produk 42 | I/O — User I/O - bidirectional logic pin |
| Pin produk 43 | I/O — User I/O - bidirectional logic pin |
| Pin produk 44 | GND — Ground reference |
| Pin produk 45 | I/O — User I/O - bidirectional logic pin |
| Pin produk 46 | I/O — User I/O - bidirectional logic pin |
| Pin produk 47 | I/O — User I/O - bidirectional logic pin |
| Pin produk 48 | I/O — User I/O - bidirectional logic pin |
| Pin produk 49 | I/O — User I/O - bidirectional logic pin |
| Pin produk 50 | I/O — User I/O - bidirectional logic pin |
| Pin produk 51 | I/O — User I/O - bidirectional logic pin |
| Pin produk 52 | I/O — User I/O - bidirectional logic pin |
| Pin produk 53 | I/O — User I/O - bidirectional logic pin |
| Pin produk 54 | I/O — User I/O - bidirectional logic pin |
| Pin produk 55 | I/O — User I/O - bidirectional logic pin |
| Pin produk 56 | I/O — User I/O - bidirectional logic pin |
| Pin produk 57 | I/O — User I/O - bidirectional logic pin |
| Pin produk 58 | I/O — User I/O - bidirectional logic pin |
| Pin produk 59 | I/O — User I/O - bidirectional logic pin |
| Pin produk 60 | I/O — User I/O - bidirectional logic pin |
| Pin produk 61 | I/O — User I/O - bidirectional logic pin |
| Pin produk 62 | I/O — User I/O - bidirectional logic pin |
| Pin produk 63 | I/O — User I/O - bidirectional logic pin |
| Pin produk 64 | I/O — User I/O - bidirectional logic pin |
| Pin produk 65 | I/O — User I/O - bidirectional logic pin |
| Pin produk 66 | I/O — User I/O - bidirectional logic pin |
| Pin produk 67 | I/O — User I/O - bidirectional logic pin |
| Pin produk 68 | I/O — User I/O - bidirectional logic pin |
| Pin produk 69 | I/O — User I/O - bidirectional logic pin |
| Pin produk 70 | VCC — +5V supply voltage |
| Pin produk 71 | I/O — User I/O - bidirectional logic pin |
| Pin produk 72 | I/O — User I/O - bidirectional logic pin |
| Pin produk 73 | I/O — User I/O - bidirectional logic pin |
| Pin produk 74 | I/O — User I/O - bidirectional logic pin |
| Pin produk 75 | I/O — User I/O - bidirectional logic pin |
| Pin produk 76 | I/O — User I/O - bidirectional logic pin |
| Pin produk 77 | I/O — User I/O - bidirectional logic pin |
| Pin produk 78 | I/O — User I/O - bidirectional logic pin |
| Pin produk 79 | I/O — User I/O - bidirectional logic pin |
| Pin produk 80 | I/O — User I/O - bidirectional logic pin |
| Pin produk 81 | I/O — User I/O - bidirectional logic pin |
| Pin produk 82 | I/O — User I/O - bidirectional logic pin |
| Pin produk 83 | I/O — User I/O - bidirectional logic pin |
| Pin produk 84 | I/O — User I/O - bidirectional logic pin |
| Pin produk 85 | I/O — User I/O - bidirectional logic pin |
| Pin produk 86 | GND — Ground reference |
| Pin produk 87 | I/O — User I/O - bidirectional logic pin |
| Pin produk 88 | I/O — User I/O - bidirectional logic pin |
| Pin produk 89 | I/O — User I/O - bidirectional logic pin |
| Pin produk 90 | I/O — User I/O - bidirectional logic pin |
| Pin produk 91 | I/O — User I/O - bidirectional logic pin |
| Pin produk 92 | I/O — User I/O - bidirectional logic pin |
| Pin produk 93 | I/O — User I/O - bidirectional logic pin |
| Pin produk 94 | I/O — User I/O - bidirectional logic pin |
| Pin produk 95 | I/O — User I/O - bidirectional logic pin |
| Pin produk 96 | I/O — User I/O - bidirectional logic pin |
| Pin produk 97 | I/O — User I/O - bidirectional logic pin |
| Pin produk 98 | I/O — User I/O - bidirectional logic pin |
| Pin produk 99 | I/O — User I/O - bidirectional logic pin |
| Pin produk 100 | I/O — User I/O - bidirectional logic pin |
Aplikasi Umum
EPM5192AQI100-15 cocok untuk 6 aplikasis: Peripheral Bus Decoder (ISA/PCI Glue Logic), High-Speed State Machine Controller, Address Decoding for 8/16/32-bit Microprocessors, TTL Glue Logic Replacement, Motor Control Sequencer, Industrial Automation Controller.
Peripheral Bus Decoder (ISA/PCI Glue Logic)
The EPM5192AQI100-15 fits ISA and PCI bus decoder applications because its 192 macrocells can absorb dozens of 74LS138/74F244 decoder functions into a single chip, while the 15 ns tpd comfortably meets ISA bus 8 MHz and PCI 33 MHz address-decode timing budgets. With 64 user I/O plus 7 dedicated inputs, the device handles 16-bit ISA address plus chip-select enable signals in one device. The industrial -40C to +85C temperature range supports factory-floor PCs. Power consumption is dominated by CMOS static current (~150 mA typical), simplifying thermal design in slot-card form factors. The PQFP-100 footprint is breadboard-friendly, easing legacy system maintenance.
Direkomendasikan
High-Speed State Machine Controller
The EPM5192AQI100-15 suits high-speed state machine controllers because the 15 ns tpd and 83.3 MHz fMAX support synchronous state machines clocked at 50 MHz with one full clock of propagation margin. Its 192 macrocells accommodate 8-16 state FSMs plus registered output flags, while the LAB/PIA structure provides predictable timing regardless of macrocell utilization - critical for safety-relevant sequencing. Industrial temperature grade supports outdoor and factory-cabinet use. JTAG-based programming via Altera programming hardware simplifies field configuration. This part is widely used in motor control sequencers and protocol bridges.
Direkomendasikan
Address Decoding for 8/16/32-bit Microprocessors
The EPM5192AQI100-15 is widely deployed for 8/16/32-bit microprocessor address decoding because its 64 I/O and 7 dedicated inputs can monitor a full 24-bit address bus plus control signals (AS, UDS, LDS, RW) in one device. The 15 ns propagation delay guarantees valid chip-select assertion within one 25 MHz 68k-cycle, or comfortably within 33 MHz ARM7 access windows. Industrial temperature grade suits embedded industrial PCs and outdoor telecom cabinets. The OTP EPROM architecture means firmware is locked at programming time - ideal for tamper-resistant or secure-boot decoder paths. The MAX+PLUS II / Quartus toolchain accepts Abel/VHDL/Verilog legacy designs.
Direkomendasikan
TTL Glue Logic Replacement
The EPM5192AQI100-15 consolidates dozens of 74LS/74F/74ALS discrete TTL packages into one 100-pin PQFP because its 192 macrocells provide roughly 60-80 SSI/MSI-equivalent gate functions in a single IC. This reduces PCB area by 80%, cuts power consumption (5V CMOS static vs TTL bipolar), and improves reliability by eliminating interconnect solder joints. The 15 ns tpd matches 74F logic speed, and the 64 I/O directly drive TTL-level loads. Industrial temperature grade supports harsh environments where legacy TTL was used. The MAX 5000 architecture is deterministic, simplifying timing analysis vs FPGA alternatives.
Direkomendasikan
Motor Control Sequencer
The EPM5192AQI100-15 drives motor control sequencer logic because its 192 macrocells encode commutation tables, PWM control timing, fault interlocks, and encoder interfaces in one device, while 15 ns tpd supports real-time current-loop control at 20 kHz PWM. The 64 user I/O accept quadrature encoder inputs plus H-bridge gate driver controls, while 7 dedicated inputs handle hardware fault signals with deterministic latency. Industrial -40C to +85C operation covers servo drive cabinets and outdoor pump controllers. The OTP architecture locks the safety interlock firmware, satisfying functional-safety documentation requirements. JTAG programming allows factory calibration of trip thresholds.
Direkomendasikan
Industrial Automation Controller
The EPM5192AQI100-15 supports industrial automation controllers (PLC expansion modules, distributed I/O) because it integrates address decoding, I/O scanning, and protocol bridging in one 100-pin PQFP while meeting -40C to +85C industrial temperatures. The 192 macrocells handle Profibus/Modbus/CanOpen framing plus digital I/O multiplexing, while 15 ns tpd supports 1 ms deterministic scan cycles. 64 user I/O accommodate 32-point digital I/O modules plus fieldbus interfaces. The OTP EPROM architecture locks safety-critical firmware, supporting IEC 61131-3 functional safety requirements. The MAX 5000 family is widely deployed in legacy PLC platforms, simplifying spare-part qualification.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk EPM5192AQI100-15 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | EPM5192AQI100-20 | EPM5192AQC100-15 | EPM5192AQC100-20 | EPM5192AQM100-15 |
|---|---|---|---|---|---|
| Package | PQFP-100 (R-PQFP-G100) | PQFP-100 (R-PQFP-G100) - same | PQFP-100 (R-PQFP-G100) - same | PQFP-100 (R-PQFP-G100) - same | PQFP-100 (R-PQFP-G100) - same |
| Brand | Intel (formerly Altera) | Intel | Intel | Intel | Intel |
| Macrocells | 192 | 192 | 192 | 192 | 192 |
| Speed Grade (tpd) | 15 ns | 20 ns (-33%) | 15 ns (same) | 20 ns (-33%) | 15 ns (same) |
| Temperature Grade | Industrial (-40C to +85C) | Industrial (-40C to +85C) | Commercial (0C to +70C) | Commercial (0C to +70C) | Military (-55C to +125C) |
| User I/O | 64 | 64 | 64 | 64 | 64 |
| LABs | 12 | 12 | 12 | 12 | 12 |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
| Family | MAX 5000 | MAX 5000 | MAX 5000 | MAX 5000 | MAX 5000 |
Diferensiator Kunci
- Industrial temperature grade with 15 ns speed grade (vsEPM5192AQC100-15)
- Faster speed grade (15 ns) at industrial temperature (vsEPM5192AQI100-20)
- High macrocell density (192) with deterministic timing (vsEPM5192AQC100-20)
Catatan Desain
PQFP-100 packages require careful PCB layout because the 0.5 mm lead pitch and 100-pin gull-wing leads are sensitive to solder bridging. Use a 4-mil solder mask dam between pads, IPC-SM-782 land patterns, and a reflow profile with a 60-90 second TAL above 220C. Place a 0.1 uF ceramic decoupling capacitor as close as possible to each VCC/GND pair (pins 26/44, 70/86) - the MAX 5000 family draws ~150 mA during high-frequency transitions and supply noise directly affects tpd variation.
All 64 user I/O pins are 5V TTL-compatible, but unused I/O should be configured in MAX+PLUS II / Quartus software as outputs driving a defined logic level (preferably low) rather than left floating. Floating I/O oscillate at intermediate voltages, increasing quiescent supply current by 2-5 mA per pin and injecting AC noise into adjacent signals. The 7 dedicated inputs (pins reserved in the die, accessed through specific package pins) must be tied to a defined logic level through external pull-up or pull-down resistors if not driven by a source.
The EPM5192AQI100-15 is an OTP (one-time-programmable) EPROM-based device - once programmed, it cannot be erased or re-programmed. Do NOT use engineering samples or pre-programmed parts for prototyping iterations; instead, use the JTAG programming interface with a windowed (ceramic) EPM5192GM device for development, then transition to the plastic OTP package for production. Also note that the MAX 5000 architecture does not support in-system programmability (ISP) - all programming must be done before PCB mounting via the Altera programming hardware (ByteBlasterMV or USB-Blaster).
Informasi Konformitas
RoHS/REACH/lead-free compliance not stated in verified web data - this is a legacy 1990s Altera part predating widespread RoHS adoption. Mark [DATA_NEEDED] for confirmation. AEC-Q100 not applicable for legacy programmable logic.
