EPM5192JC84-1 - 192-Macrocell UV CPLD, 40ns | Altera
MPN: EPM5192JC84-1 ✗ Akhir HidupEPM5192JC84-1 Ringkasan
A CPLD (Complex Programmable Logic Device) is a non-volatile, instant-on programmable logic device built from multiple PAL-like macrocell blocks interconnected by a central programmable switch matrix. CPLDs sit in the broader taxonomy of programmable logic devices alongside SPLDs, FPGAs, and PALs, offering deterministic timing, predictable I/O behavior, and zero-configuration power-up that make them ideal for address decoding, bus interfacing, state-machine control, and peripheral bridging functions.
Key features of the EPM5192JC84-1 include 192 macrocells of logic capacity, 40 ns worst-case pin-to-pin propagation delay, a wide 5 V ±5 % supply tolerance, and an 84-terminal J-lead ceramic surface-mount package with high-reliability thermal characteristics. CMOS EPROM-based configuration cells provide one-time-programmable (OTP) operation in production, while the UV window variant supports laboratory and prototype erasure. The architecture delivers combinational and registered logic with programmable interconnect, allowing designers to consolidate multiple 74-series MSI/SSI packages into a single device.
Architecturally, the device is built on Altera's CMOS EPROM process with a classic AND-OR array feeding individual product-term allocators per macrocell, a structure that yields deterministic, data-sheet-guaranteed timing independent of routing congestion. Because the configuration is stored in non-volatile EPROM cells, the EPM5192JC84-1 functions as a true instant-on logic device with no boot PROM or in-system programming controller required.
Typical applications include legacy 5 V address decoding, glue logic between microprocessors and peripherals, asynchronous state machines, and bus-interface adapters in industrial and instrumentation equipment. When designing with this part, note that ceramic CQCC84 packages are surface-mountable but require careful thermal profiling and that the UV-erasable variant must be exposed to UV light for ~20 minutes before reprogramming.
Alternatif penggantian untuk EPM5192JC84-1 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian EPM5192JC84-1 (sama faktor bentuk dan footprint) — berbeda di dalam Package, Device Type, Mounting Type, Propagation Delay (tPD), Programming Method.
EPM5192JC84
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
EPM5192JC84-2
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
EPM5192JC-1
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →EPM5192JC-2
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →EPM5192JC
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →EPM5192GC84-1
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →EPM5192GI84
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →EPM5192JC84-1 Rating Maksimal & Karakteristik Listrik
| Device Type | UV-Erasable/OTP Complex Programmable Logic Device (CPLD) |
| Family | MAX 5000 |
| Macrocells | 192 |
| Propagation Delay (tpd) | 40 ns (worst case) |
| Supply Voltage (Vcc) | 4.75 V to 5.25 V (5 V ±5 %) |
| Process Technology | CMOS EPROM |
| Operating Temperature Grade | Commercial |
| Paket | 84-terminal Ceramic Chip Carrier (CQCC84 / J-lead) |
| JESD-30 Package Code | S-CQCC-J84 |
| Terminal Form | J-BEND |
| Package Shape | SQUARE |
| Tipe Mounting | Surface Mount |
| Programmability | UV-erasable (window) / OTP in production |
| Configuration Memory | EPROM (non-volatile, instant-on) |
Konfigurasi Pin EPM5192JC84-1
| Pin produk 1 | GND — Ground reference |
| Pin produk 2 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 3 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 4 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 5 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 6 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 7 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 8 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 9 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 10 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 11 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 12 | GND — Ground reference |
| Pin produk 13 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 14 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 15 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 16 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 17 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 18 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 19 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 20 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 21 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 22 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 23 | GND — Ground reference |
| Pin produk 24 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 25 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 26 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 27 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 28 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 29 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 30 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 31 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 32 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 33 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 34 | GND — Ground reference |
| Pin produk 35 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 36 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 37 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 38 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 39 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 40 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 41 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 42 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 43 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 44 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 45 | GND — Ground reference |
| Pin produk 46 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 47 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 48 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 49 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 50 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 51 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 52 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 53 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 54 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 55 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 56 | GND — Ground reference |
| Pin produk 57 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 58 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 59 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 60 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 61 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 62 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 63 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 64 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 65 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 66 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 67 | GND — Ground reference |
| Pin produk 68 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 69 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 70 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 71 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 72 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 73 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 74 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 75 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 76 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 77 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 78 | GND — Ground reference |
| Pin produk 79 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 80 | VCC — +5 V supply (4.75 V to 5.25 V) |
| Pin produk 81 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 82 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 83 | I/O — General-purpose I/O pin (macrocell I/O) |
| Pin produk 84 | I/O — General-purpose I/O pin (macrocell I/O) |
Aplikasi Umum
EPM5192JC84-1 cocok untuk 6 aplikasis: 5 V Address Decoding Glue Logic, Legacy Microprocessor Bus Interfacing, Asynchronous State Machine Controllers, Peripheral Bridging and Protocol Conversion, Test and Measurement Instrumentation Logic, Legacy Industrial Control I/O Expansion.
5 V Address Decoding Glue Logic
The EPM5192JC84-1 fits 5 V address-decoding applications because of its 192-macrocell density, 40 ns worst-case propagation delay, and 5 V ±5 % supply tolerance. With 192 macrocells it can decode large peripheral or memory address maps and generate chip-select strobes for multiple devices in a single package. Placed between a microprocessor bus and memory/peripheral devices, it replaces several 74LS138/74LS139 decoder trees; unlike an FPGA it provides instant-on non-volatile configuration, so the system boots into a known decoder state without bootloader delay. Designers should budget for the 40 ns tpd when computing the address-to-CSK skew and place the CPLD close to the devices it decodes to minimize board-level propagation.
Direkomendasikan
Legacy Microprocessor Bus Interfacing
The EPM5192JC84-1 is well suited to legacy 8-bit and 16-bit microprocessor bus-interface tasks thanks to its 5 V-tolerant CMOS EPROM I/O and deterministic 40 ns propagation delay. With 192 macrocells the part can implement wait-state generators, bus-watchdog timers, byte-swapping muxes, and read/write strobe combiners in a single device, replacing 4 to 6 MSI packages. Because the configuration is non-volatile, the interface logic is active immediately at power-on, which is critical for cold-boot systems that cannot tolerate FPGA configuration latency. The CQCC84 ceramic package also tolerates the wider industrial temperature range typical of legacy industrial controllers.
Direkomendasikan
Asynchronous State Machine Controllers
The EPM5192JC84-1 is a strong fit for asynchronous and synchronous state-machine controllers in industrial equipment because of its EPROM-based configuration and guaranteed 40 ns worst-case timing. Each macrocell contains a flip-flop with configurable clock, reset, and preset, so 192 flip-flops can implement complex FSMs for protocol handling, sequencing, or machine control in a single package. The ceramic CQCC84 package withstands harsh industrial environments, while the non-volatile instant-on configuration eliminates the boot-up delays and configuration-bitstream risks of SRAM-based FPGAs. Designers should use the Quartus or MAX+PLUS II fitter to balance macrocell utilization and verify that worst-case tpd plus I/O delay still meets the FSM cycle time.
Direkomendasikan
Peripheral Bridging and Protocol Conversion
The EPM5192JC84-1 fits peripheral-bridging and protocol-conversion duties because 192 macrocells are sufficient to bridge legacy 8-bit parallel buses to serial peripherals or to convert between asynchronous and synchronous protocols. The 40 ns tpd gives the device enough timing margin to act as a transparent bus bridge without stalling the master, while the 5 V I/O is directly compatible with TTL/CMOS peripherals of the 1990s. The non-volatile EPROM configuration means the bridge is functional the instant VCC crosses 4.75 V, eliminating FPGA configuration overhead. Suggested adjacent parts: 8255 PPI, 16550 UART, or an 8-bit microcontroller as the peripheral endpoint.
Direkomendasikan
Test and Measurement Instrumentation Logic
The EPM5192JC84-1 is a good match for test-and-measurement front-panel and backplane glue logic because its 192 macrocells can implement counter/divider chains, pulse generators, scan-multiplexer control, and trigger-conditioning logic in a single device. The 40 ns propagation delay supports timing generators up to ~10 MHz, while the 5 V ±5 % supply tolerance is robust against the noisy rails typical of bench instruments. The ceramic CQCC84 package also provides the long-term reliability expected in laboratory-grade equipment. Use the JTAG-style programming pins to update the configuration during calibration, and pair with a precision ADC such as the AD574A for a complete instrument front end.
Direkomendasikan
Legacy Industrial Control I/O Expansion
The EPM5192JC84-1 fits legacy industrial control I/O-expansion applications because its 192 macrocells can implement latched 24 V-compatible input scanners, output mux/demux logic, and isolated-control interfaces. The ceramic CQCC84 package operates reliably across industrial temperature ranges and the EPROM-based configuration retains logic state through power cycles without battery backup - a major reliability advantage over SRAM FPGAs. With 40 ns worst-case tpd the device can scan and refresh dozens of I/O points within a single PLC scan cycle. Designers should place optocoupler isolation upstream of the EPM5192 and follow the Altera MAX 5000 decoupling guidelines (one 0.1 µF per VCC pin) for noise immunity.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk EPM5192JC84-1 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | EPM5192JC84 | EPM5192JC84-2 | EPM5192JC-1 | EPM5192JC-2 | EPM5192GI84 |
|---|---|---|---|---|---|---|
| Package | CQCC84 (J-lead) ceramic | CQCC84 (J-lead) ceramic - same | CQCC84 (J-lead) ceramic - same | CQCC84 (J-lead) ceramic - same | CQCC84 (J-lead) ceramic - same | CQCC84 (J-lead) ceramic - same |
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Macrocells | 192 | 192 | 192 | 192 | 192 | 192 |
| Propagation Delay (tpd) | 40 ns | 55 ns | 25 ns | 40 ns | 25 ns | 40 ns |
| Supply Voltage | 4.75 V to 5.25 V | 4.75 V to 5.25 V | 4.75 V to 5.25 V | 4.75 V to 5.25 V | 4.75 V to 5.25 V | 4.75 V to 5.25 V |
| Temperature Grade | Commercial | Commercial | Commercial | Commercial | Commercial | Industrial |
| Process / Memory | CMOS EPROM | CMOS EPROM | CMOS EPROM | CMOS EPROM | CMOS EPROM | CMOS EPROM |
| Pin Compatibility | 84-pin CQCC84 (J-lead) | 100% pin-compatible | 100% pin-compatible | 100% pin-compatible | 100% pin-compatible | 100% pin-compatible |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Diferensiator Kunci
- 40 ns speed grade in CQCC84 ceramic package (vsEPM5192JC84)
- Faster alternative in the same package (vsEPM5192JC84-2)
- Industrial-temp upgrade path in the same footprint (vsEPM5192GI84)
Catatan Desain
Place one 0.1 µF decoupling capacitor as close as possible to every VCC pin of the EPM5192JC84-1 and a single 1 µF to 10 µF bulk capacitor near the package power-entry point. The MAX 5000 family datasheet recommends a maximum of 1 to 2 inches of trace between each VCC pin and its decoupling cap. Ground returns should be low-impedance: use a ground plane under the CQCC84 footprint and stitch multiple vias around the package perimeter to reduce ground bounce on high-fanout outputs.
Do not exceed the 5 V ±5 % supply tolerance - operation above 5.25 V may corrupt the EPROM configuration cells over time, while operation below 4.75 V can cause timing violations or loss of macrocell state. Programming the part requires a 12.5 V VPP pulse on the appropriate JTAG pin and a fully MAX+PLUS II-generated JEDEC file; using a Quartus-generated JEDEC for a MAX 5000 design without the legacy device support installed is a common failure mode. UV erasure of windowed variants requires ~20 minutes of exposure to a calibrated UV lamp (12 mW/cm² @ 253.7 nm).
Estimated: the ceramic CQCC84 package has a typical θJA of approximately 35 to 45 C/W in still air. With VCC = 5.0 V and the device fully utilized at 192 macrocells switching at 5 MHz, the CMOS EPROM core dissipates an estimated 200 to 400 mW; junction rise above ambient is therefore ~7 to 18 C, well within the commercial operating range. Designers should still avoid placing heat-generating components adjacent to the CQCC84 footprint and should provide copper pours tied to GND on inner PCB layers to spread any localized self-heating.
Informasi Konformitas
RoHS/REACH compliance data not provided in the verified web data; mark as unknown. AEC-Q100 is not applicable to a logic CPLD without automotive qualification. Ceramic CQCC84 packages historically contain lead-bearing terminations; verify RoHS status with the distributor before placing compliant orders.
