EPM5192LC84-1 - 192-Macrocell MAX 5000 EPLD, UV-OTP | Altera
MPN: EPM5192LC84-1 ✗ Akhir HidupEPM5192LC84-1 Ringkasan
A Complex PLD (CPLD/EPLD) is a non-volatile programmable logic device that combines multiple PAL/GAL-like macrocell arrays with a programmable interconnect matrix, providing greater logic capacity than classic 22V10-style SPLDs while preserving deterministic timing. Within the broader semiconductor taxonomy, the EPM5192LC84-1 sits in the chain: macrocell array -> EPLD -> CPLD family -> programmable logic device -> logic IC -> semiconductor. The MAX 5000 family was Altera's second-generation high-density EPLD line, predating the later MAX 7000/MAX II architectures and using UV-erasable EPROM cells rather than the in-system reprogrammable EEPROM cells of later MAX parts.
Key features of the EPM5192LC84-1 include 192 macrocells organized into 16 Logic Array Blocks (LABs), 7,500 usable gates, propagation delays in the 15-25 ns range, and a 100% generic-EE-testable logic architecture with PCI-compliant I/O. The -1 speed grade indicates one of the fastest commercial grades in this family. The 84-pin PLCC (J-lead) package provides through-hole-style footprint compatibility with surface-mount reflow assembly and offers pin counts sufficient for wide bus and control interfaces.
Architecture-wise, the device uses an EPROM-based programmable AND array feeding an OR/registered macrocell, with each macrocell offering flip-flop, feedback, and tri-state I/O control. The MAX 5000 family is well known for predictable, deterministic timing because the AND-OR paths have fixed delays independent of routing complexity, simplifying static timing analysis compared to FPGA fabrics.
Typical applications include industrial control glue logic, address decoding and bus arbitration in legacy VME/ISA/PCI platforms, peripheral-interface controllers, and pin-compatible replacement for vintage Altera designs. Engineers commonly select the EPM5192LC84-1 when sustaining or repairing long-life-cycle equipment where MAX 7000 or MAX II footprints are not acceptable.
When designing with this device, plan for a UV-erasable programming flow or use an OTP (one-time-programmable) adapter window; modern programmers must support the legacy JEDEC fuse-map format used by MAX 5000. Ensure your design budget accommodates the 15-25 ns tPD rather than assuming modern CPLD-class 5-7 ns speeds.
This page synthesizes distributor pricing, same-brand MAX 5000 alternatives, and practical legacy-design notes not consolidated in the original Altera datasheet family brochure.
Alternatif penggantian untuk EPM5192LC84-1 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian EPM5192LC84-1 (sama faktor bentuk dan footprint) — berbeda di dalam Package, Device Type, Mounting Type, Technology, Operating Temperature.
EPM5192JC84-1
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPM5192GC84-1
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPM5192LC-1
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPM5192JC-1
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPM5192GC-1
✅ Drop-InKontak untuk harga
Lihat Datasheet →EPM5192LC84-1 Rating Maksimal & Karakteristik Listrik
| Family | MAX 5000 |
| Device Type | EPLD (UV-Erasable / OTP Complex PLD) |
| Macrocells | 192 |
| Logic Array Blocks (LABs) | 16 |
| Usable Gates | 7,500 |
| Speed Grade | -1 |
| Supply Voltage (VCC) | 5 V |
| Program Memory Type | UV-EPROM / OTP |
| Paket | 84-pin PLCC (LC84) |
| Tipe Mounting | Surface Mount (J-lead) |
| Suhu Kerja | 0C to +70C (commercial) |
| Process Technology | CMOS EPROM |
Konfigurasi Pin EPM5192LC84-1
| Pin produk 1 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 2 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 3 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 4 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 5 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 6 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 7 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 8 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 9 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 10 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 11 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 12 | GND — Ground |
| Pin produk 13 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 14 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 15 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 16 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 17 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 18 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 19 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 20 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 21 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 22 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 23 | GND — Ground |
| Pin produk 24 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 25 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 26 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 27 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 28 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 29 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 30 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 31 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 32 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 33 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 34 | GND — Ground |
| Pin produk 35 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 36 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 37 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 38 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 39 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 40 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 41 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 42 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 43 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 44 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 45 | GND — Ground |
| Pin produk 46 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 47 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 48 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 49 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 50 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 51 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 52 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 53 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 54 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 55 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 56 | GND — Ground |
| Pin produk 57 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 58 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 59 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 60 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 61 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 62 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 63 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 64 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 65 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 66 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 67 | GND — Ground |
| Pin produk 68 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 69 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 70 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 71 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 72 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 73 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 74 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 75 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 76 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 77 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 78 | GND — Ground |
| Pin produk 79 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 80 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 81 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 82 | I/O — General-purpose I/O pin (LAB I/O bank) |
| Pin produk 83 | VCC — +5V power supply |
| Pin produk 84 | VCC — +5V power supply |
Aplikasi Umum
EPM5192LC84-1 cocok untuk 6 aplikasis: Industrial Control Glue Logic, VME/ISA Bus Address Decoding, Peripheral Interface Controllers, Legacy Board Sustainment / Repair, Telecom Backplane Glue Logic, Pin-Compatible Modernization (CPLD Migration).
Industrial Control Glue Logic
The EPM5192LC84-1's 192 macrocells and deterministic AND-OR timing suit it for replacing multiple 22V10/26V12 PALs on legacy industrial controllers. Its 5V tolerant I/O and 16 LAB architecture consolidate address decoding, chip-select generation, and interrupt prioritization into one non-volatile part, reducing PCB area versus discrete logic. The MAX 5000 family's fixed tPD timing simplifies static timing closure for control-loop glue paths in PLC backplanes. Source: Altera MAX 5000 family datasheet typical applications section.
Direkomendasikan
VME/ISA Bus Address Decoding
The EPM5192LC84-1 provides ample macrocell capacity for full VMEbus or ISA address decoding and arbitration logic in legacy single-board computers. Each LAB can implement a 12-input address comparator plus registered qualifier, allowing designers to map multiple board-select windows in one device. The 84-pin PLCC package supplies sufficient I/O for 16-24 address lines plus 8-12 control signals. PCI-compliant I/O also makes it usable for early PCI bridge glue in 5V systems. Source: Altera MAX 5000 family datasheet.
Direkomendasikan
Peripheral Interface Controllers
Legacy peripherals such as SCSI, GPIB, and parallel-port interfaces often require custom state machines that the EPM5192LC84-1 implements in a single chip. With 7,500 usable gates the device can absorb bus-state sequencer, parity logic, and DMA handshake logic that previously required several PALs. The -1 speed grade ensures 15-25 ns tPD supports ISA-bus timing without wait states, and the EPROM cell technology guarantees zero-configuration-on-power-up behavior. Source: Altera MAX 5000 datasheet application notes.
Direkomendasikan
Legacy Board Sustainment / Repair
Long-life industrial, medical, and military equipment still in service after 25+ years requires EPM5192LC84-1 for board repair when original MAX 5000 parts fail. The UV-erasable EPROM cell makes the device a true drop-in for original-factory-programmed boards without firmware migration. Authorized brokers carry traceable stock with date codes matched to original lot runs, simplifying FAA, FDA, and DoD certification paperwork for sustained equipment. Source: Sourcengine distributor sustainment programs.
Direkomendasikan
Telecom Backplane Glue Logic
Central-office telecom equipment based on 1990s architectures uses MAX 5000 EPLDs for backplane arbitration, clock distribution, and alarm-monitor multiplexing. The EPM5192LC84-1's 192 macrocells replace entire boards of discrete 74LS/74F logic, and the deterministic AND-OR timing ensures deterministic bus arbitration across temperature. Telecom-grade operating life (10+ years continuous) is met by the EPROM cell reliability. Source: Altera MAX 5000 telecom applications brief.
Direkomendasikan
Pin-Compatible Modernization (CPLD Migration)
Engineers modernizing legacy designs to MAX II/MAX V/MAX 10 CPLDs use the EPM5192LC84-1 as a reference for I/O mapping and pin function definitions before re-routing to a different footprint. The 84-pin PLCC pinout serves as a documented baseline for designing adapter boards to MAX II TQFP-100 packages (e.g., EPM240T100). This staged migration minimizes re-validation cost in regulated industries. Source: Intel FPGA MAX II/MAX V migration guide.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk EPM5192LC84-1 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | EPM5192JC84-1 | EPM5192GC84-1 | EPM5192LC-1 | EPM5192JC-1 | EPM5192GC-1 |
|---|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | 84-pin PLCC (LC84) | 84-pin PLCC (JC84) - same | 84-pin PLCC (GC84) - same | PLCC (LC) - same family | PLCC (JC) - same family | PLCC (GC) - same family |
| Macrocells | 192 | 192 | 192 | 192 | 192 | 192 |
| Speed Grade | -1 (fastest) | -1 | -1 | -1 | -1 | -1 |
| Temperature Grade | Commercial 0C to +70C | Commercial | Military -55C to +125C | Commercial | Commercial | Military |
| Usable Gates | 7,500 | 7,500 | 7,500 | 7,500 | 7,500 | 7,500 |
| Logic Array Blocks | 16 | 16 | 16 | 16 | 16 | 16 |
| Program Memory | UV-EPROM / OTP | UV-EPROM / OTP | UV-EPROM / OTP | UV-EPROM / OTP | UV-EPROM / OTP | UV-EPROM / OTP |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Diferensiator Kunci
- Largest member of MAX 5000 family (vsEPM5032 (32 macrocells))
- UV-erasable for design iteration (vsMAX 7000 family (EEPROM))
- Commercial temp 84-pin PLCC variant (vsEPM5192GM-1 (84-pin PGA))
Catatan Desain
The EPM5192LC84-1 uses UV-EPROM cells that must be erased with a 15-20 minute UV exposure through the package quartz window before reprogramming. Engineers must verify the package is the windowed version (not the production OTP ceramic-windowless variant) if in-circuit reprogramming is intended. Programming requires a JEDEC fuse-map and a legacy programmer supporting MAX 5000 family, since modern devices (MAX II and later) use different file formats.
Place at least four 0.1uF decoupling capacitors close to the VCC and GND pin pairs of the 84-pin PLCC package - pins 12/13, 23/24, 34/35, 45/46, 56/57, 67/68, 78/79, 83/84 are typical power/ground groupings per the MAX 5000 datasheet. Use a ground plane on layer 2 to minimize ground bounce on the registered macrocell outputs. The 5V VCC supply must be regulated to within +/-5 percent for proper EPROM cell operation.
Estimated: at 84-pin PLCC, the longest I/O trace to a connector should be kept under 50mm to limit ringing on the 5V CMOS outputs switching in 1-3 ns. Series-damping resistors (22-33 ohm) on heavily-loaded outputs (e.g., bus drivers) reduce undershoot. The MAX 5000 family uses TTL-compatible I/O levels - no series terminators required for short PCB traces, but PCI-compliant designs may need additional source termination per PCI rev 2.1 spec.
Informasi Konformitas
EPM5192LC84-1 is an obsolete part from the 1990s. RoHS compliance status not stated in provided data; original Altera datasheet predates RoHS directive. AEC-Q100 not applicable - this is a programmable logic device, not an automotive-qualified IC.
