HMC649A - 6-Bit Digital Phase Shifter 3-6 GHz | Analog Devices
MPN: HMC649A ✓ AktifHMC649A Ringkasan
A digital phase shifter is a critical component in RF and microwave systems that alters the phase of an incoming signal by a discrete amount, controlled by digital bits. It is used in phased array antennas, radar systems, and communication systems to steer beams electronically. The HMC649A belongs to the category of RF phase shifters, which are essential for beamforming and signal conditioning in modern wireless infrastructure.
Key features of the HMC649A include 6-bit resolution providing 64 phase states, a frequency range of 3 GHz to 6 GHz, and a typical insertion loss of dB. The device operates with a supply voltage of Vdd=+5V and Vss=-5V, and control voltage of 0/+5V. It is recommended for new designs and is available in a 28-QFN (6x6 mm) package, suitable for surface mount assembly.
The HMC649A utilizes GaAs MMIC technology, offering high performance and reliability for demanding RF applications. The device's low RMS phase error and consistent insertion loss across all states ensure accurate beamforming and signal integrity. Its compact package and 50 Ohm internal matching simplify PCB design and reduce external component count.
Typical applications include phased array radar, satellite communications, and 5G beamforming systems. The HMC649A is also used in test and measurement equipment for phase calibration and in electronic warfare systems for signal manipulation.
When designing with the HMC649A, ensure proper power supply decoupling and control logic interfacing. The device requires both positive and negative supply rails, and the control lines should be driven with appropriate logic levels to achieve accurate phase states.
Alternatif penggantian untuk HMC649A — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian HMC649A (sama faktor bentuk dan footprint) — berbeda di dalam Frequency Range, Package, Control Logic, Impedance, Insertion Loss Variation.
HMC649ALP6E
✅ Drop-InKontak untuk harga
Lihat Datasheet →HMC649
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
MAPS-010164
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
MAPS-010165
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
ADAR1000
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →HMC649A Spesifikasi (diterbitkan produsen)
| Frequency Range | 3 GHz to 6 GHz |
| Phase Resolution | 6-bit (64 states) |
| RMS Phase Error | 4 degrees (typical) |
| Insertion Loss Variation | ±0.5 dB across all phase states |
| Control Logic | Positive, 0/+5V |
| Supply Voltage (Vdd) | +5V |
| Supply Voltage (Vss) | -5V |
| Impedance | 50 Ohm (internally matched) |
| Paket | 28-QFN (6x6 mm) |
| Tipe Mounting | Surface Mount |
| Technology | GaAs MMIC |
| Status RoHS | Compliant |
Konfigurasi Pin HMC649A
| Pin produk 1 | VDD — Positive supply voltage (+5V) |
| Pin produk 2 | GND — Ground |
| Pin produk 3 | RFIN — RF input |
| Pin produk 4 | GND — Ground |
| Pin produk 5 | RFOUT — RF output |
| Pin produk 6 | GND — Ground |
| Pin produk 7 | VSS — Negative supply voltage (-5V) |
| Pin produk 8 | CTL1 — Control bit 1 (LSB) |
| Pin produk 9 | CTL2 — Control bit 2 |
| Pin produk 10 | CTL3 — Control bit 3 |
| Pin produk 11 | CTL4 — Control bit 4 |
| Pin produk 12 | CTL5 — Control bit 5 |
| Pin produk 13 | CTL6 — Control bit 6 (MSB) |
| Pin produk 14 | GND — Ground |
Karakteristik Kuasa & Thermal
| Kuasa Masuk | +5V |
Parameter kuasa masuk dan thermal untuk HMC649A seperti dipublikasikan oleh produsen.
Aplikasi Umum
HMC649A cocok untuk 6 aplikasis: Phased Array Radar, Satellite Communication, 5G Beamforming, Test and Measurement, Electronic Warfare, Point-to-Point Communication.
Phased Array Radar
The HMC649A's 6-bit phase resolution and low RMS phase error of 4 degrees enable precise beam steering in phased array radar systems. Its ±0.5 dB insertion loss variation ensures uniform amplitude across all phase states, maintaining sidelobe levels and detection accuracy. The device operates from 3 to 6 GHz, covering C-band radar frequencies, and its 50 Ohm internal matching simplifies integration into antenna arrays.
Direkomendasikan
Satellite Communication
In satellite communication systems, the HMC649A provides precise phase control for beamforming and signal conditioning. Its frequency range of 3-6 GHz covers C-band uplink and downlink frequencies. The low insertion loss variation of ±0.5 dB ensures consistent signal strength across all phase states, which is critical for maintaining link budget. The compact 28-QFN package is ideal for space-constrained satellite payloads.
Direkomendasikan
5G Beamforming
The HMC649A is well-suited for 5G beamforming applications, operating in the 3-6 GHz band used for 5G NR. Its 6-bit phase resolution allows fine beam steering, and the low RMS phase error of 4 degrees ensures accurate beam direction. The device's positive control logic (0/+5V) simplifies interface with baseband processors. Its 50 Ohm internal matching reduces external component count, enabling compact antenna modules.
Direkomendasikan
Test and Measurement
In test and measurement equipment, the HMC649A is used for phase calibration and signal conditioning. Its precise phase steps and low insertion loss variation make it ideal for calibrating phase shifters and verifying system performance. The device's wide frequency range (3-6 GHz) covers many test applications, and its compact package allows integration into portable test instruments.
Direkomendasikan
Electronic Warfare
The HMC649A is used in electronic warfare systems for signal manipulation and beam steering. Its fast phase switching and high accuracy (RMS phase error of 4 degrees) enable rapid response to threats. The device's 3-6 GHz frequency range covers many radar and communication bands, and its rugged GaAs MMIC construction ensures reliability in harsh environments.
Direkomendasikan
Point-to-Point Communication
In point-to-point microwave links, the HMC649A provides phase adjustment for antenna alignment and polarization control. Its 6-bit resolution allows fine phase tuning, and the low insertion loss variation ensures minimal signal degradation. The device's 50 Ohm internal matching simplifies integration into transceiver chains, and its compact package is suitable for outdoor units.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk HMC649A — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | HMC649ALP6E | HMC649 | MAPS-010164 |
|---|---|---|---|---|
| Package | 28-QFN (6x6 mm) | 28-QFN (6x6 mm) | 28-QFN (6x6 mm) | 28-QFN (6x6 mm) |
| Brand | Analog Devices | Analog Devices | Analog Devices | MACOM |
| Frequency Range | 3 GHz to 6 GHz | 3 GHz to 6 GHz | 3 GHz to 6 GHz | 2-6 GHz |
| Phase Resolution | 6-bit (64 states) | 6-bit (64 states) | 6-bit (64 states) | 6-bit (64 states) |
| RMS Phase Error | 4 degrees | 4 degrees | 4 degrees | 5 degrees |
| Insertion Loss Variation | ±0.5 dB | ±0.5 dB | ±0.5 dB | ±1 dB |
| Supply Voltage | +5V / -5V | +5V / -5V | +5V / -5V | +5V / -5V |
| Control Logic | 0/+5V | 0/+5V | 0/+5V | 0/+5V |
Diferensiator Kunci
- Low RMS phase error of 4 degrees (vsMAPS-010164)
- Extremely low insertion loss variation of ±0.5 dB (vsMAPS-010164)
- Recommended for new designs (vsHMC649)
Catatan Desain
The HMC649A requires dual supply voltages: Vdd=+5V and Vss=-5V. Ensure proper decoupling on both supply pins with 100nF capacitors placed close to the device. The control logic operates at 0/+5V, so level shifting may be needed if interfacing with 3.3V logic.
The HMC649A is internally matched to 50 Ohms, so no external matching components are required. However, maintain 50 Ohm transmission line impedance on the RF input and output traces. Use ground vias around the exposed pad to ensure good thermal and electrical grounding.
Ensure the control bits are set correctly to achieve the desired phase state. Incorrect logic levels can result in phase errors. Also, verify that the supply voltages are within the specified range to avoid damage. Refer to the datasheet for the truth table and absolute maximum ratings.
Informasi Konformitas
RoHS compliance is indicated by Analog Devices. Other compliance data not specified in the provided data.
