ICS501GIT - 140MHz CMOS Clock Generator | Renesas Electronics
MPN: ICS501GIT ✓ AktifICS501GIT Ringkasan
A clock generator is a clock-and-timing semiconductor that converts a crystal or external clock reference into a stable digital waveform for sequential digital logic. Within the timing hierarchy, the ICS501GIT is a PLL-based clock generator, which is a type of frequency generator and clock-and-timing IC. Its role is to provide a repeatable clock source to processors, communications equipment, test systems, and other digital circuits that require coordinated timing.
The principal verified specifications for the ICS501GIT include a 140 MHz maximum frequency, one clock output, CMOS output technology, PLL support, and crystal or clock input. It accepts either a crystal reference or an external clock, while its nominal 1:1 input-to-output ratio simplifies designs that require frequency multiplication rather than programmable division. The 8-pin TSSOP, also identified as 8-MSOP with a 3.00 mm body width, supports compact surface-mount layouts.
Its PLL architecture provides a practical alternative to relying only on a high-frequency crystal or an external oscillator module. The clock generator converts a lower-frequency reference into a higher-frequency CMOS output, reducing the component count compared with discrete oscillator and buffer arrangements. Because the public listing does not expose detailed operating, voltage, temperature, or jitter tables, those characteristics should be confirmed in the manufacturer datasheet before release to production.
Typical uses include digital controller timing, embedded communications equipment, data-acquisition systems, general-purpose clock distribution, and replacement of higher-cost discrete crystal-oscillator arrangements. The device is particularly appropriate when a design needs a standard CMOS clock output, a PLL-based frequency-generation stage, and a compact 8-pin surface-mount footprint. Input and output edges remain important considerations in high-speed systems.
Place the crystal, input clock, decoupling capacitor, and output routing according to the manufacturer reference layout. Keep the oscillator loop short, maintain a clean return path, and route the 140 MHz-capable clock away from high-current switching nodes. Confirm input amplitude, supply voltage, output load, and maximum operating frequency against the exact datasheet revision before production.
This product page consolidates the verified ICS501GIT specifications, manufacturer documentation link, lifecycle-relevant sourcing information, compatible family references, and practical PCB guidance. The alternatives are restricted to documented TSSOP-8 clock-generator references, while the selection tables make package, brand, and compatibility differences explicit for design review.
Alternatif penggantian untuk ICS501GIT — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian ICS501GIT (sama faktor bentuk dan footprint) — berbeda di dalam Package, Maximum Frequency, Number of Circuits, Input Type, Product Type.
ICS501GI
✅ Drop-InKontak untuk harga
Lihat Datasheet →ICS501GT
✅ Drop-InKontak untuk harga
Lihat Datasheet →501GILFT
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
501GILF
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
ICS501GIT Spesifikasi
| Product Type | Clock Generator IC |
| Maximum Frequency | 140 MHz |
| Number of Circuits | 1 circuit |
| Phase-Locked Loop | Yes |
| Input Type | Clock or crystal |
| Tipe Output | CMOS |
| Input-to-Output Ratio | 1:1 |
| Differential Input | No |
| Differential Output | No |
| Jumlah Output | 1 output |
| Paket | 8-pin TSSOP / 8-MSOP |
| Package Width | 3.00 mm |
| Tipe Mounting | Surface mount |
| Product Family | LOCO clock generator |
ICS501GIT 3.00 mm Diamant Konfigurasi Panduan
Konfigurasi pin untuk ICS501GIT (3.00 mm pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.
Tidak ada data diatribut pin yang tersedia untuk ICS501GIT.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
ICS501GIT cocok untuk 6 aplikasis: Digital Controller Timing, Communications Equipment Timing, Data Acquisition and Control Systems, PLL-Based Clock Generation, Embedded Processor Clocking, Test and Measurement Instrumentation.
Digital Controller Timing
The ICS501GIT fits digital controllers that require a stable CMOS clock generated from a crystal or external reference. Its PLL support and maximum frequency of 140 MHz allow the controller clock to exceed the frequency of a lower-cost crystal while retaining a single-output architecture. The 8-pin TSSOP package also saves board area compared with larger oscillator modules. Before implementation, verify the exact supply voltage, input amplitude, crystal loading, and output timing limits against the manufacturer datasheet. The nominal 1:1 input-to-output ratio should be included in the clock-tree design because it determines the feedback multiplication and frequency plan.
Direkomendasikan
Communications Equipment Timing
ICS501GIT can supply the timing reference used in communications equipment where a compact, single CMOS clock output is preferable to a discrete oscillator arrangement. The PLL-based LOCO architecture is designed to generate a high-quality clock from a lower-frequency crystal or clock source, and the verified 140 MHz maximum supports common digital signal-processing rates below that limit. Keep the clock trace short and controlled-impedance where applicable, and isolate it from switching regulators and high-current interfaces. Confirm jitter, edge rate, output loading, and channel-to-channel timing requirements before using the part in a new communication design.
Direkomendasikan
Data Acquisition and Control Systems
The ICS501GIT is suitable for data-acquisition and industrial-control systems that synchronize converters, processors, and memory from a common clock source. A single PLL clock stage can organize digital signal processing while the compact 8-pin TSSOP footprint preserves board space. The crystal or external-clock input supports different reference arrangements, allowing the designer to select the source that best matches required accuracy and reliability. Validate acquisition timing, clock jitter, and maximum operating temperature against the system specification. Route the clock away from ADC and comparator switching nodes to prevent coupling into the measured signal.
Direkomendasikan
PLL-Based Clock Generation
ICS501GIT is designed for applications that generate a higher-frequency clock from a lower-frequency reference through a PLL-based LOCO stage. The verified maximum frequency is 140 MHz, while the nominal input-to-output relationship is 1:1, so the reference and feedback arrangement must be calculated as part of the clock design. Its CMOS output suits digital loads that require a square waveform and a single active clock domain. Use the manufacturer reference layout for oscillator connections and account for crystal startup, feedback stability, and output-load capacitance. This arrangement is preferable to discrete multiplication only when its integration and operating limits match the design.
Direkomendasikan
Embedded Processor Clocking
The ICS501GIT can provide the external clock source for an embedded processor that does not require a differential clock or an output above 140 MHz. Its eight-pin TSSOP package is easy to route on compact control boards, and the choice of crystal or external-clock input allows the reference source to be adapted to the system's accuracy requirements. The design must preserve the component's specified operating conditions and maintain a short return path from the oscillator pins. For low-power systems, confirm start-up and shutdown behavior, quiescent consumption, and clock-off requirements in the manufacturer datasheet before selecting the topology.
Direkomendasikan
Test and Measurement Instrumentation
ICS501GIT is applicable to test and measurement instrumentation that coordinates sampling, conversion, processing, and communication through a common digital clock. Its 140 MHz maximum frequency provides a useful ceiling for moderate-speed digital subsystems, while the single CMOS output simplifies distribution when one timing domain is sufficient. Place the clock source close to the timing-critical circuitry and use a ground reference that does not share high-current return paths with motors, relays, or power-conversion stages. Confirm output jitter, rise and fall times, supply tolerance, and temperature range so that instrument timing margins remain valid across the complete operating environment.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk ICS501GIT — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | ICS501GI | ICS501GT | 501GILFT | 501GILF |
|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Integrated Device Technology | Integrated Device Technology |
| Package | 8-pin TSSOP / 8-MSOP | 8-pin TSSOP / 8-MSOP | 8-pin TSSOP | 8-pin TSSOP | 8-pin TSSOP |
| Product Type | Clock Generator IC | Clock Generator IC | LOCO PLL Clock Generator | Clock Generator | Clock Generator |
Diferensiator Kunci
- Documented Renesas same-package sourcing option (vsICS501GI)
- Same-family TSSOP-8 alternative with matching LOCO function (vsICS501GT)
- Documented cross-manufacturer TSSOP-8 replacement route (vs501GILFT)
Catatan Desain
Place the crystal or reference-clock components close to the ICS501GIT and follow the manufacturer layout exactly. The oscillator and feedback loop should be short, with a continuous ground return and no switching-node copper beneath the timing section. Because the device can operate to 140 MHz, route the CMOS clock output as a controlled signal when timing margin is limited, keep it away from relay, motor, and regulator-switching nodes, and provide a nearby low-impedance decoupling connection. Review edge rates and trace loading using the datasheet output model before finalizing topology or impedance.
Do not select a replacement solely from the ICS501 family name and TSSOP footprint. Confirm the crystal or external-clock input arrangement, feedback ratio, supply voltage, temperature grade, output enable or test-pin behavior, and clock-output loading against the exact suffix being replaced. The 501GILF and 501GILFT records describe complete TSSOP-8 clock-generator substitutions, but detailed electrical deltas are not quantified. Run a prototype with the intended crystal and confirm startup, frequency accuracy, output waveform, and downstream timing before releasing a cross-manufacturer substitution.
Treat the ICS501GIT output as a high-speed digital clock even when the operating frequency is well below the 140 MHz maximum. Use the shortest practical route to the clock-consuming device, provide a nearby return path, and avoid stubs or test pads that add uncontrolled capacitance. If the clock is distributed across a board, use an appropriate buffer or clock-tree device rather than relying on long daisy-chained traces. Verify output rise and fall time, capacitive loading, jitter, and downstream setup and hold margins with the final reference and interconnects.
Informasi Konformitas
The accessible product records do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to this general-purpose clock-generator IC because no automotive qualification is stated.