Renesas Electronics

ICS501GIT - 140MHz CMOS Clock Generator | Renesas Electronics

MPN: ICS501GIT ✓ Aktif
8-pin TSSOP / 8-MSOP Package 140 MHz Speed
MOQ: 1 |

ICS501GIT Ringkasan

The Renesas Electronics ICS501GIT is a single-output CMOS clock generator with a maximum frequency of 140 MHz, a phase-locked loop, and crystal or clock input support, supplied in an 8-pin TSSOP package. It provides a 1:1 input-to-output ratio and is designed to generate a high-quality clock from a lower-frequency reference. The ICS501GIT is commonly associated with the LOCO family of clock generators, combining frequency multiplication, clock generation, and oscillator functions in one timing IC.

A clock generator is a clock-and-timing semiconductor that converts a crystal or external clock reference into a stable digital waveform for sequential digital logic. Within the timing hierarchy, the ICS501GIT is a PLL-based clock generator, which is a type of frequency generator and clock-and-timing IC. Its role is to provide a repeatable clock source to processors, communications equipment, test systems, and other digital circuits that require coordinated timing.

The principal verified specifications for the ICS501GIT include a 140 MHz maximum frequency, one clock output, CMOS output technology, PLL support, and crystal or clock input. It accepts either a crystal reference or an external clock, while its nominal 1:1 input-to-output ratio simplifies designs that require frequency multiplication rather than programmable division. The 8-pin TSSOP, also identified as 8-MSOP with a 3.00 mm body width, supports compact surface-mount layouts.

Its PLL architecture provides a practical alternative to relying only on a high-frequency crystal or an external oscillator module. The clock generator converts a lower-frequency reference into a higher-frequency CMOS output, reducing the component count compared with discrete oscillator and buffer arrangements. Because the public listing does not expose detailed operating, voltage, temperature, or jitter tables, those characteristics should be confirmed in the manufacturer datasheet before release to production.

Typical uses include digital controller timing, embedded communications equipment, data-acquisition systems, general-purpose clock distribution, and replacement of higher-cost discrete crystal-oscillator arrangements. The device is particularly appropriate when a design needs a standard CMOS clock output, a PLL-based frequency-generation stage, and a compact 8-pin surface-mount footprint. Input and output edges remain important considerations in high-speed systems.

Place the crystal, input clock, decoupling capacitor, and output routing according to the manufacturer reference layout. Keep the oscillator loop short, maintain a clean return path, and route the 140 MHz-capable clock away from high-current switching nodes. Confirm input amplitude, supply voltage, output load, and maximum operating frequency against the exact datasheet revision before production.

This product page consolidates the verified ICS501GIT specifications, manufacturer documentation link, lifecycle-relevant sourcing information, compatible family references, and practical PCB guidance. The alternatives are restricted to documented TSSOP-8 clock-generator references, while the selection tables make package, brand, and compatibility differences explicit for design review.

Pilihan pengganti yang segera untuk ICS501GIT — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera ICS501GIT (sama faktor bentuk dan kaki) — berbeza dalam Package, Maximum Frequency, Number of Circuits, Input Type, Product Type.

Renesas Electronics
Package: 8-TSSOP, 8-MSOP (0.118 in, 3.00 mm width)
Product Type: PLL clock generator
Bandingkan Dengan ICS501GIT →
Renesas Electronics
Package: 8-TSSOP, 8-MSOP (0.118 inch, 3.00 mm Width)
Maximum Frequency: 160 MHz
Number of Circuits: 1
Bandingkan Dengan ICS501GIT →

ICS501GI

✅ Masuk Drop-In
Renesas Electronics
📦 8-pin TSSOP / 8-MSOP
PLL clock generator · 140 MHz · 1 circuit · Yes · Clock or crystal · CMOS · 1:1 · No

Hubungi untuk harga

Lihat Datasheet →

ICS501GT

✅ Masuk Drop-In
Renesas Electronics
📦 8-pin TSSOP / 8-MSOP
Clock Generator IC · 160 MHz · 1 · Yes · Clock, Crystal · CMOS · 1:1 · No

Hubungi untuk harga

Lihat Datasheet →

501GILFT

✅ Masuk Drop-In
📦 8-pin TSSOP
Indexed as a complete TSSOP-8 clock-generator replacement with consistent terminals and package; detailed frequency and electrical differences are not quantified in the comparison

📋 Alternatif rujukan (tidak dalam katalog)

501GILF

✅ Masuk Drop-In
📦 8-pin TSSOP
Same TSSOP-8 clock-generator footprint and documented terminal compatibility; detailed electrical deltas beyond the common 8-pin LOCO function are not quantified

📋 Alternatif rujukan (tidak dalam katalog)

ICS501GIT Spesifikasi

Product Type Clock Generator IC
Maximum Frequency 140 MHz
Number of Circuits 1 circuit
Phase-Locked Loop Yes
Input Type Clock or crystal
Jenis Output CMOS
Input-to-Output Ratio 1:1
Differential Input No
Differential Output No
Bilangan Output 1 output
Kemasan 8-pin TSSOP / 8-MSOP
Package Width 3.00 mm
Jenis Pemasangan Surface mount
Product Family LOCO clock generator

Panduan Konfigurasi Pin ICS501GIT 3.00 mm

Konfigurasi pin untuk ICS501GIT (3.00 mm pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 3.00 mm untuk ICS501GIT

Tiada data garisan pin yang diperoleh untuk ICS501GIT.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

ICS501GIT patut untuk 6 aplikasis: Digital Controller Timing, Communications Equipment Timing, Data Acquisition and Control Systems, PLL-Based Clock Generation, Embedded Processor Clocking, Test and Measurement Instrumentation.

🖥️

Digital Controller Timing

The ICS501GIT fits digital controllers that require a stable CMOS clock generated from a crystal or external reference. Its PLL support and maximum frequency of 140 MHz allow the controller clock to exceed the frequency of a lower-cost crystal while retaining a single-output architecture. The 8-pin TSSOP package also saves board area compared with larger oscillator modules. Before implementation, verify the exact supply voltage, input amplitude, crystal loading, and output timing limits against the manufacturer datasheet. The nominal 1:1 input-to-output ratio should be included in the clock-tree design because it determines the feedback multiplication and frequency plan.

🌐

Communications Equipment Timing

ICS501GIT can supply the timing reference used in communications equipment where a compact, single CMOS clock output is preferable to a discrete oscillator arrangement. The PLL-based LOCO architecture is designed to generate a high-quality clock from a lower-frequency crystal or clock source, and the verified 140 MHz maximum supports common digital signal-processing rates below that limit. Keep the clock trace short and controlled-impedance where applicable, and isolate it from switching regulators and high-current interfaces. Confirm jitter, edge rate, output loading, and channel-to-channel timing requirements before using the part in a new communication design.

🏭

Data Acquisition and Control Systems

The ICS501GIT is suitable for data-acquisition and industrial-control systems that synchronize converters, processors, and memory from a common clock source. A single PLL clock stage can organize digital signal processing while the compact 8-pin TSSOP footprint preserves board space. The crystal or external-clock input supports different reference arrangements, allowing the designer to select the source that best matches required accuracy and reliability. Validate acquisition timing, clock jitter, and maximum operating temperature against the system specification. Route the clock away from ADC and comparator switching nodes to prevent coupling into the measured signal.

🔧

PLL-Based Clock Generation

ICS501GIT is designed for applications that generate a higher-frequency clock from a lower-frequency reference through a PLL-based LOCO stage. The verified maximum frequency is 140 MHz, while the nominal input-to-output relationship is 1:1, so the reference and feedback arrangement must be calculated as part of the clock design. Its CMOS output suits digital loads that require a square waveform and a single active clock domain. Use the manufacturer reference layout for oscillator connections and account for crystal startup, feedback stability, and output-load capacitance. This arrangement is preferable to discrete multiplication only when its integration and operating limits match the design.

📱

Embedded Processor Clocking

The ICS501GIT can provide the external clock source for an embedded processor that does not require a differential clock or an output above 140 MHz. Its eight-pin TSSOP package is easy to route on compact control boards, and the choice of crystal or external-clock input allows the reference source to be adapted to the system's accuracy requirements. The design must preserve the component's specified operating conditions and maintain a short return path from the oscillator pins. For low-power systems, confirm start-up and shutdown behavior, quiescent consumption, and clock-off requirements in the manufacturer datasheet before selecting the topology.

🔧

Test and Measurement Instrumentation

ICS501GIT is applicable to test and measurement instrumentation that coordinates sampling, conversion, processing, and communication through a common digital clock. Its 140 MHz maximum frequency provides a useful ceiling for moderate-speed digital subsystems, while the single CMOS output simplifies distribution when one timing domain is sufficient. Place the clock source close to the timing-critical circuitry and use a ground reference that does not share high-current return paths with motors, relays, or power-conversion stages. Confirm output jitter, rise and fall times, supply tolerance, and temperature range so that instrument timing margins remain valid across the complete operating environment.

What is the ICS501GIT?
The ICS501GIT is a Renesas Electronics single-output CMOS clock generator with PLL support, crystal or clock input, and a maximum frequency of 140 MHz. According to the ICS501 manufacturer datasheet, the LOCO family is intended to generate a high-quality clock output from a lower-frequency crystal or clock input. The device uses a 1:1 input-to-output ratio and is packaged in an 8-pin TSSOP, also described as an 8-MSOP with a 3.00 mm body width.
What are the key specifications of ICS501GIT that engineers should know?
The key ICS501GIT specifications are a 140 MHz maximum frequency, one CMOS output, PLL support, crystal or clock input, and a 1:1 input-to-output ratio. Renesas identifies the device as an 8-TSSOP or 8-MSOP clock-generator IC. These parameters place the part in the PLL-based clock-generator category and make it useful when a design needs a compact surface-mount timing source driven by a crystal or external reference.
Where can I download the ICS501GIT datasheet PDF?
The ICS501GIT datasheet can be accessed through the manufacturer documentation link on this page or through the indexed ICS501 PDF linked in the data-source section. The datasheet describes the LOCO clock generator, its PLL operation, and use with a lower-frequency crystal or clock input. Review the exact document revision and ordering information before releasing a PCB or production BOM.
Where can I find the ICS501GIT pinout?
The ICS501GIT pinout is located in the pin-description and package-drawing sections of the manufacturer ICS501 datasheet. The verified package configuration is an 8-pin TSSOP or 8-MSOP with a 3.00 mm body width. Use the package drawing to assign crystal connections, supply, ground, and the CMOS clock output, and cross-check every net against the selected ordering code before fabrication.
What clock inputs can ICS501GIT accept?
The ICS501GIT accepts either a crystal or an external clock, according to the verified device specifications. Its PLL-based architecture generates a high-frequency CMOS clock from a lower-frequency reference, and the nominal input-to-output ratio is 1:1. The exact input amplitude, feedback range, load capability, and recommended crystal parameters should be confirmed in the manufacturer datasheet for the operating conditions of the design.
Is ICS501GIT suitable for a 140 MHz digital system?
The ICS501GIT is rated for a maximum frequency of 140 MHz and provides one CMOS output, so it is suitable for digital systems operating at or below that limit when the external reference and load conditions are valid. Verify supply voltage, operating temperature, clock-output rise and fall times, jitter, output drive, and downstream timing requirements in the manufacturer datasheet before approving a high-speed design.
What is the difference between ICS501GIT and ICS501GI?
ICS501GIT and ICS501GI are both listed as Renesas Electronics 140 MHz, one-output CMOS PLL clock generators in 8-pin TSSOP or 8-MSOP packages. The visible ordering information indicates an industrial versus extended-temperature designation difference, but the exact temperature grades are not stated in the accessible product records. Confirm the complete ordering table and pin configuration in the manufacturer datasheet before treating either part as a substitute.
Can ICS501GT replace ICS501GIT?
ICS501GT is a same-family TSSOP-8 clock-generator reference associated with ICS501GIT, and the family comparison describes matching LOCO PLL clock-generation characteristics. However, the available comparison record does not expose every ordering-code and temperature-grade distinction. Treat ICS501GT as a candidate replacement only after checking the exact suffix meaning, pin names, supply limits, and lifecycle status in the manufacturer documentation.
When should I choose ICS501GIT instead of a discrete crystal oscillator?
Choose ICS501GIT when the design needs an integrated PLL-based clock generator that accepts a crystal or clock reference and produces a CMOS output. Compared with a discrete oscillator stage, the device can consolidate clock generation functions into an 8-pin surface-mount package. It may not be preferable when the system requires differential outputs, a frequency outside the 140 MHz maximum, or an operating condition not covered by the device documentation.
Is 501GILF a drop-in replacement for ICS501GIT?
The 501GILF is described as an 8-pin TSSOP clock generator with performance, functional characteristics, terminals, and packages consistent with ICS501GIT, making it a candidate drop-in replacement. The indexed comparison also identifies 501GILFT as TSSOP-8 with consistent terminals and package. Before substitution, verify the manufacturer ordering code, operating-temperature range, supply voltage, frequency coverage, and electrical limits against the full datasheets.
What is the best equivalent for ICS501GIT?
The best documented equivalent depends on whether the priority is identical Renesas sourcing or an alternate manufacturer. The 501GILF and 501GILFT are indexed as TSSOP-8 drop-in clock-generator references, while ICS501GI, ICS501GT, and 501GILFT appear in same-family comparisons. No competitor MPN in the cross-reference results establishes a manufacturer-neutral, pin-compatible alternative, so a replacement should not be selected without a complete electrical comparison.
What can replace ICS501GIT on an existing PCB?
ICS501GT, 501GILFT, and 501GILF are the principal same-package candidates identified for an existing TSSOP-8 design. Their indexed descriptions place them in the same clock-generator class and identify a 1:1 input-to-output ratio for the ICS501 family. For production use, confirm that the crystal pins, supply pins, ground connections, enable or test behavior, frequency range, and output loading match the original board exactly.
Where can I buy ICS501GIT and what is its lead time?
Use the Request a Quote form on this page to request current availability, lot acceptance, and lead time for ICS501GIT. The manufacturer part is listed by several distribution channels and an indexed supplier reports inventory, but stock and lead time can change without notice. Provide the required quantity, date code policy, and shipment destination with the quote request for an actionable scheduling response.
What is the price of ICS501GIT?
Current unit pricing for ICS501GIT should be requested through the Request a Quote form on this page so the order quantity and supply conditions can be evaluated. The accessible product pages identify the exact MPN and its 140 MHz TSSOP-8 configuration but do not show qualifying quantity-break prices. A quote request provides a current commercial basis without relying on a stale single-unit price.
Is ICS501GIT in stock?
ICS501GIT is shown as an orderable part in indexed distributor listings, while one supplier reports a large on-hand quantity, but inventory changes continuously. Request current stock confirmation through the Request a Quote form on this page and specify the required quantity and date-code preference. For production planning, also confirm factory lead time and whether any allocated stock is available for shipment.

Data referensi kejuruteraan untuk ICS501GIT — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose ICS501GIT when the design requires a Renesas 140 MHz, single-output CMOS clock generator in an 8-pin TSSOP package and accepts a crystal or external clock. ICS501GI is the closest same-manufacturer candidate when an alternate Renesas ordering code is desirable, provided its suffix-specific temperature and qualification requirements match. ICS501GT is another same-family option for a LOCO PLL clock-generator design, but the complete ordering and electrical tables should be compared. Consider 501GILFT or 501GILF when avoiding single-source Renesas supply is important; the indexed comparison supports their TSSOP-8 terminal and package compatibility, yet the missing frequency, jitter, voltage, and temperature details require prototype validation. None of the listed alternatives should replace ICS501GIT if the system requires differential outputs, exceeds 140 MHz, or depends on a feature not present in the alternative datasheet.

Perbandingan dengan Gantian

Parametr Produk Ini ICS501GI ICS501GT 501GILFT 501GILF
Brand Renesas Electronics Renesas Electronics Renesas Electronics Integrated Device Technology Integrated Device Technology
Package 8-pin TSSOP / 8-MSOP 8-pin TSSOP / 8-MSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP
Product Type Clock Generator IC Clock Generator IC LOCO PLL Clock Generator Clock Generator Clock Generator

Penyeberangsung Jelas

  • Documented Renesas same-package sourcing option (vsICS501GI)
  • Same-family TSSOP-8 alternative with matching LOCO function (vsICS501GT)
  • Documented cross-manufacturer TSSOP-8 replacement route (vs501GILFT)

Catatan Desain

Place the crystal or reference-clock components close to the ICS501GIT and follow the manufacturer layout exactly. The oscillator and feedback loop should be short, with a continuous ground return and no switching-node copper beneath the timing section. Because the device can operate to 140 MHz, route the CMOS clock output as a controlled signal when timing margin is limited, keep it away from relay, motor, and regulator-switching nodes, and provide a nearby low-impedance decoupling connection. Review edge rates and trace loading using the datasheet output model before finalizing topology or impedance.

Do not select a replacement solely from the ICS501 family name and TSSOP footprint. Confirm the crystal or external-clock input arrangement, feedback ratio, supply voltage, temperature grade, output enable or test-pin behavior, and clock-output loading against the exact suffix being replaced. The 501GILF and 501GILFT records describe complete TSSOP-8 clock-generator substitutions, but detailed electrical deltas are not quantified. Run a prototype with the intended crystal and confirm startup, frequency accuracy, output waveform, and downstream timing before releasing a cross-manufacturer substitution.

Treat the ICS501GIT output as a high-speed digital clock even when the operating frequency is well below the 140 MHz maximum. Use the shortest practical route to the clock-consuming device, provide a nearby return path, and avoid stubs or test pads that add uncontrolled capacitance. If the clock is distributed across a board, use an appropriate buffer or clock-tree device rather than relying on long daisy-chained traces. Verify output rise and fall time, capacitive loading, jitter, and downstream setup and hold margins with the final reference and interconnects.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The accessible product records do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to this general-purpose clock-generator IC because no automotive qualification is stated.

Data disahkan pada: 2026-11-16 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

ICS501GIT ICS501GIT datasheet ICS501GIT datasheet pdf ICS501GIT pinout ICS501GIT specifications ICS501GIT equivalent ICS501GIT replacement ICS501GIT drop-in replacement ICS501GIT vs ICS501GT ICS501GIT TSSOP-8 ICS501GIT price ICS501GIT stock Renesas Electronics ICS501GIT

Komponen dan Tanda berkaitan

Renesas Electronics ICS501GIT ICS501GI ICS501GT 501GILFT 501GILF clock generator clock and timing IC PLL LOCO CMOS clock output crystal oscillator interface frequency synthesis 140 MHz 1:1 input-to-output ratio TSSOP-8 MSOP-8 surface-mount package SMD digital clocking communications equipment data acquisition embedded processor timing instrumentation timing
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ