Renesas Electronics

ICS574MI - 160 MHz PLL Zero-Delay Fanout Buffer | Renesas

MPN: ICS574MI ✓ Aktif
3.3 V Vdss 8-SOIC, 0.154 inch body width, 3.90 mm width Package 160 MHz Speed
MOQ: 1 |

ICS574MI Ringkasan

The Renesas Electronics ICS574MI is a PLL-based zero-delay fanout buffer designed for high-speed clock distribution, operating up to 160 MHz and providing four low-skew CMOS outputs from one clock input. The device is packaged in an 8-SOIC and is identified as a 1:4 fanout, zero-delay buffer with an integrated PLL. Its primary role is to align a distributed clock with the source clock while compensating for propagation delay introduced by board traces, connectors, and loading.

A zero-delay buffer is a clock-and-timing integrated circuit that uses phase-locked-loop technology to reproduce an input clock at its outputs with nearly zero net propagation delay. It belongs to the fanout-buffer hierarchy within clock and timing ICs, where PLL-based devices trade additional internal complexity for improved edge alignment and predictable output skew. This makes the ICS574MI suitable for systems in which several circuits must receive a related clock without accumulating cumulative trace-delay differences.

According to the Renesas 574 Datasheet, the ICS574 is based on proprietary low-jitter PLL techniques. The documented operating point includes speeds up to 160 MHz at 3.3 V, with four low-skew outputs. When one output is returned directly to the FBIN input, the rising edge of each output can be aligned with the rising edge of the feedback signal, allowing the feedback path to compensate for clock distribution delay around the board.

Typical uses include processor and FPGA clock distribution, memory-interface clock fanout, backplane clock replication, communications equipment, and test-and-measurement systems. The 1:4 ratio reduces the number of separate clock-driver channels required when four destinations need a common timing reference. Because a fanout buffer does not regenerate data content, its outputs are intended for clock or low-fanout control signals rather than high-speed data traffic.

The key design consideration is output loading and board topology. Short, matched traces, terminated clock networks, and appropriate supply decoupling help preserve edge quality and limit skew. When cascading multiple fanout devices, engineers should verify cumulative jitter, output-to-output skew, duty-cycle distortion, and loading with the complete clock distribution network rather than relying on individual device specifications.

Alternatif penggantian untuk ICS574MI — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

574MILF

✅ Drop-In
📦 8-SOIC
Same 160 MHz PLL-based 1:4 zero-delay function and four CMOS outputs; the order-code suffix differs by 0 MHz, 0 outputs, and 0% on the documented core timing function

📋 Alternatif referensi (tidak dalam katalog)

ICS574MI Spesifikasi

Device Type Fanout Buffer (Distribution), Zero Delay Buffer
Architecture PLL-based zero-delay buffer
Maximum Frequency 160 MHz
Number of Circuits 1
Jumlah Output 4
Input to Output Ratio 1:4
Input Logic Level CMOS
Output Logic Level CMOS
Documented Supply Voltage 3.3 V
Propagation Delay Zero delay (PLL compensated)
Output Skew Low skew
Jitter Low jitter
Feedback Compensation FBIN feedback input for output-edge alignment
Paket 8-SOIC, 0.154 inch body width, 3.90 mm width
Tipe Mounting Surface mount

ICS574MI 8-soic, 0.154 inch body width, 3.90 mm width Diamant Konfigurasi Panduan

Konfigurasi pin untuk ICS574MI (8-soic, 0.154 inch body width, 3.90 mm width pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.

Diamant diagram pakai pakai 8-soic, 0.154 inch body width, 3.90 mm width untuk ICS574MI

Tidak ada data diatribut pin yang tersedia untuk ICS574MI.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

ICS574MI cocok untuk 6 aplikasis: FPGA Clock Fanout, Processor and SoC Clock Distribution, Memory-Interface Clock Fanout, Backplane and Communications Clock Replication, Test and Measurement Clock Fanout, Synchronous Data Acquisition Systems.

🖥️

FPGA Clock Fanout

The ICS574MI fits FPGA clock-distribution trees because its PLL-based zero-delay function can align four output edges to a feedback reference rather than allowing trace delay to accumulate independently on each branch. Operating up to 160 MHz at 3.3 V, it is suitable for feeding several FPGA clock resources from one source clock. Route a controlled-impedance clock network, connect one output to FBIN, and keep matched branches electrically similar. The main benefit is reduced timing uncertainty at the receiving devices; the trade-off is that PLL loop behavior, input jitter, and output loading must be verified with the complete board rather than treated as ideal clock copies.

🏭

Processor and SoC Clock Distribution

The ICS574MI can distribute a common reference clock to a processor, SoC, memory controller, and peripheral blocks when four destinations must launch from a tightly related edge. Its 1:4 fanout ratio avoids placing four separate drivers near the source, and the FBIN path allows the PLL to compensate for board propagation delay. Use it only where the clock rate remains within the documented 160 MHz limit at 3.3 V. Keep the source slew rate clean, isolate the feedback route from noisy loads, and verify duty-cycle distortion at each receiver. This arrangement improves edge alignment but adds a PLL-based device and feedback loop that must be validated during timing sign-off.

💾

Memory-Interface Clock Fanout

The ICS574MI is appropriate for clock distribution to memory-interface logic when a single source must reach several receivers with controlled relative timing. Its four low-skew CMOS outputs can feed address, command, or data-path clock domains that require a common launch relationship. The PLL feedback topology helps compensate for unequal clock-trace delays that would otherwise shift setup and hold margins between endpoints. Place the device near the clock source, use series damping where needed, and keep the FBIN trace short and shielded from switching-current paths. Because memory interfaces are sensitive to duty-cycle distortion and jitter, validate the design with realistic loading and the highest specified operating frequency.

🌐

Backplane and Communications Clock Replication

In communications equipment, the ICS574MI can replicate one reference clock into four outputs for protocol engines, transceivers, and interface controllers distributed across a chassis or backplane. The 160 MHz capability accommodates many legacy parallel-bus and fabric-clock applications, while FBIN feedback addresses the skew accumulated through connectors and board routing. Keep each output on a separate, impedance-controlled branch, and place termination at the appropriate endpoint. The device is best suited to clock signals rather than high-speed data, and its benefits depend on disciplined board topology. Compare end-to-end skew and jitter at the connector rather than relying only on the chip's nominal output timing.

🧪

Test and Measurement Clock Fanout

The ICS574MI can fan a laboratory or instrument clock into four synchronized channels, giving multiple acquisition, conversion, or processing sections a common timing reference. Its PLL-based alignment helps keep channel-to-channel skew predictable across a multi-board instrument, which is valuable for time-domain measurements and synchronous sampling. Use short output routes, matched input/output loading, and a single-point reference concept to minimize connector-induced delay differences. The trade-off is that a PLL can add jitter and the zero-delay function does not eliminate all trace skew by itself. Characterize the complete distribution path with the intended instrument settings and verify that the 160 MHz operating limit covers the fastest clock mode required.

📡

Synchronous Data Acquisition Systems

The ICS574MI is useful when several converters or digital processors must sample from a common clock edge in a synchronous acquisition system. Four low-skew outputs provide clock copies without replicating the source driver at every load, and the feedback path lets the PLL align output edges with the distributed network. Keep the clock network free of aggressive capacitive stubs and confirm that each output drives a stable, well-terminated load. The device improves relative edge placement but cannot compensate for random jitter already present on the source clock. Use a low-jitter reference upstream, provide local supply bypassing, and measure skew across the complete acquisition chain before treating the timing margin as fixed.

Ringkasan Produk Direkomendasikan

574MILF Alternate orderable member of the same 574 fanout-buffer family Digunakan di dalam: FPGA Clock Fanout, Processor and SoC Clock Distribution, Memory-Interface Clock Fanout, Backplane and Communications Clock Replication, Test and Measurement Clock Fanout, Synchronous Data Acquisition Systems TS932IDT STMicroelectronics Digunakan di dalam: FPGA Clock Fanout, Backplane and Communications Clock Replication, Synchronous Data Acquisition Systems TS922AID STMicroelectronics Digunakan di dalam: Processor and SoC Clock Distribution, Test and Measurement Clock Fanout
What is the ICS574MI?
The ICS574MI is a Renesas PLL-based zero-delay fanout buffer that converts one CMOS clock input into four low-skew CMOS clock outputs. According to the Renesas 574 Datasheet, it uses proprietary low-jitter phase-locked-loop techniques and operates at speeds up to 160 MHz at 3.3 V. It is classified as a 1:4 fanout buffer and is intended for high-speed clock distribution rather than data signals.
What is the maximum operating frequency of ICS574MI?
The ICS574MI operates at speeds up to 160 MHz at a 3.3 V supply, as stated in the Renesas 574 Datasheet. This frequency describes the maximum documented clock rate for the PLL-based zero-delay buffer. The device provides one input and four outputs with a 1:4 input-to-output ratio, making it useful where a single source clock must feed four separately routed destinations.
Where can I download the ICS574MI datasheet?
The official ICS574MI datasheet is available on the Renesas Electronics document page at https://www.renesas.com/en/document/dst/574-datasheet. The document describes the PLL-based zero-delay architecture, the FBIN feedback arrangement, four low-skew outputs, and operation up to 160 MHz at 3.3 V. Use the manufacturer document for the authoritative pin-description table and electrical characteristics.
Where can I find the ICS574MI pinout?
The ICS574MI pinout should be taken from the pin-description table in the Renesas 574 Datasheet, not inferred from a distributor category listing. The device is an 8-SOIC package, and its functional connections include the clock input, four clock outputs, and the FBIN feedback input used for edge alignment. Request the manufacturer datasheet through the product documentation before assigning PCB tracks or net names.
How does the FBIN feedback connection work in ICS574MI?
The FBIN input allows the ICS574MI to compare its distributed outputs with a feedback clock. According to the Renesas 574 Datasheet, connecting one output directly to FBIN aligns the rising edge of each output with the rising edge of the feedback signal. This arrangement compensates for the propagation delay of the board clock network and reduces the effective skew seen by the receiving circuits.
What can replace the ICS574MI?
The closest documented same-family replacement is the Renesas 574MILF, which appears in cross-reference listings for the ICS574MI and represents the alternate suffix of the 574 family. Confirm the temperature grade, package dimensions, pin arrangement, supply limits, and lifecycle status against the 574 Datasheet before approving it as a drop-in substitute. Use the Request a Quote form on this page for current sourcing support.
Is ICS574MI the same as 574MILF?
ICS574MI and 574MILF belong to the same 574 PLL-based zero-delay buffer family, but their orderable suffixes can denote different grade or packaging options. Both are associated with the four-output, 1:4 fanout function. Before treating 574MILF as a direct substitute, compare its ordering code, temperature range, package dimensions, pinout, and lifecycle status in the Renesas documentation.
When should I choose ICS574MI over a plain clock buffer?
Choose ICS574MI when a single clock must reach four destinations with tightly controlled edge alignment across a distributed board network. Its PLL feedback arrangement compensates for trace and component delay that accumulates in a conventional fanout tree. A plain clock buffer may be sufficient for short, lightly loaded routes, but it does not provide the same feedback-based edge-alignment function.
Is ICS574MI suitable for FPGA clock distribution?
Yes, ICS574MI is suitable for FPGA clock distribution when the design operates within its documented 160 MHz limit and uses the recommended PLL feedback topology. The four low-skew CMOS outputs allow one source clock to feed several FPGA clock resources or peripheral blocks. Validate input slew rate, output loading, trace length matching, and supply decoupling against the manufacturer datasheet.
What is the difference between ICS574MI and a standard fanout buffer?
The main difference is the PLL-based zero-delay architecture with an FBIN feedback path. A standard fanout buffer reproduces the input edge after a fixed propagation delay, while ICS574MI can use feedback alignment to compensate for distribution-path delay and reduce output-to-output timing error. Both provide four outputs in this configuration, but only the feedback-connected ICS574MI offers the alignment mechanism described in the 574 Datasheet.
What are the key specifications of ICS574MI that engineers should know?
The essential ICS574MI specifications are its 160 MHz maximum clock rate, 1:4 input-to-output ratio, four CMOS outputs, PLL-based zero-delay operation, low-jitter and low-skew performance, and 8-SOIC package. The Renesas 574 Datasheet also describes operation at 3.3 V and FBIN-based output-edge alignment. These parameters determine its suitability for high-speed, multi-destination clock networks.
How much clock skew should I expect from ICS574MI?
The Renesas 574 Datasheet describes the ICS574MI as a low-skew device, but a single numeric skew limit must be taken from the manufacturer timing-characteristics table rather than guessed. Actual board skew also depends on trace length, output loading, termination, supply noise, and PLL loop behavior. Evaluate the assembled clock network with an oscilloscope or timing analyzer when skew limits are safety-critical.
Does ICS574MI require a crystal or external clock source?
The ICS574MI accepts a CMOS clock input and generates four buffered clock outputs; it is not described as a crystal-oscillator-based clock generator. The system must therefore provide a clean, low-jitter reference clock to the input and route one output back to FBIN when distributed-edge alignment is required. The input slew and jitter requirements should be confirmed in the manufacturer timing characteristics.
Where can I buy ICS574MI online?
Use the Request a Quote form on this page to request current ICS574MI availability, volume pricing, and lead time from XAIPART. Because commercial terms and inventory change frequently, request a written quotation for the required quantity and date rather than relying on a static price listing. The manufacturer part number for quotation should be written exactly as ICS574MI.
What is the price and lead time of ICS574MI?
Current ICS574MI pricing, stock status, and lead time should be requested through the Request a Quote form on this page. A quote provides the quantity break, currency, and confirmed delivery schedule for the exact order code. Ask the supplier to state whether the 8-SOIC is supplied in tape-and-reel, tube, or another packing format before releasing the purchase order.
Is ICS574MI in stock?
ICS574MI availability is confirmed through the Request a Quote form on this page, which can return current stock and scheduled delivery for the requested quantity. Market conditions and allocation can change between quotation and order, so treat a quotation as the commercial record. Specify your required date, annual usage, and acceptable packing format when requesting the update.
Which design rules apply when routing ICS574MI outputs?
Route ICS574MI clock outputs as controlled-impedance, short, matched clock-network traces rather than as general-purpose digital signals. Keep the feedback connection from FBIN short and follow the reference topology in the Renesas 574 Datasheet. Decouple the supply locally, provide clean return paths, avoid loading the outputs with unsuitable capacitance, and verify edge quality at the far end of the longest branch.

Data referensi engineering untuk ICS574MI — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose ICS574MI when one CMOS source clock must feed four destinations and edge alignment across the board matters more than simple replication. Its PLL-based zero-delay operation and FBIN feedback path are especially useful in FPGA, processor, memory-interface, and test-system clock trees operating at or below the documented 160 MHz limit. Consider 574MILF when the same 574-family function and 8-SOIC arrangement fit the design but the alternate order code provides a better sourcing path; verify its suffix-specific grade and documentation before substitution. A plain fixed-delay clock buffer may be simpler for short, lightly loaded nets, but it does not provide the same feedback-based alignment. If the design requires more than four destinations, build a hierarchical clock tree and recheck cumulative jitter, duty-cycle distortion, and skew at every stage.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini 574MILF
Package 8-SOIC, 0.154 inch body width, 3.90 mm width 8-SOIC
Brand Renesas Electronics Renesas Electronics
Device Type Fanout Buffer (Distribution), Zero Delay Buffer 574-family zero-delay fanout buffer

Diferensiator Kunci

  • Feedback-aligned four-output clock distribution (vs574MILF)
  • Single-package 1:4 fanout (vs574MILF)
  • Low-skew and low-jitter PLL architecture (vs574MILF)

Catatan Desain

Treat the ICS574MI outputs as a controlled clock network rather than ordinary logic traces. Use short, matched routes with continuous reference planes, avoid long stubs, and place the FBIN connection as a dedicated feedback path. Connect one output back to FBIN following the manufacturer topology so the PLL can compensate for propagation delay in the distributed clock network. Confirm the physical dimensions and pin assignments against the Renesas 574 Datasheet before releasing the PCB layout.

Keep output loading within the device's recommended range and measure edge rate, duty-cycle distortion, and skew at the far end of the longest clock branch. Series damping or source termination may be required when traces are long or receivers have high capacitance. Validate the complete network with realistic loading because PLL compensation can correct systematic propagation delay but cannot remove random jitter, crosstalk, or reflections caused by poor routing.

Place the supply-decoupling capacitor close to the device and provide a low-impedance return path for each clock output. Follow the capacitor values and layout recommended in the Renesas 574 Datasheet when they are specified. Do not assume that the 3.3 V operating point permits any supply tolerance; confirm the full input-voltage range and maximum operating frequency from the manufacturer timing and electrical tables before release.

A common implementation error is treating a zero-delay buffer like an ideal logic inverter with no feedback alignment. Another is routing the clock outputs as long, unterminated traces that amplify noise and distortion. Use a clean source clock, verify the PLL feedback topology, keep the device within its documented 160 MHz limit, and test skew across all four destinations rather than measuring only at the device pins.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The Renesas 574 Datasheet and distributor listings do not establish RoHS, REACH, AEC-Q100, halogen-free, or conflict-minerals status for this order code. Confirm current declarations with the manufacturer before making a compliance claim.

Data disahkan pada: 2026-11-11 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

ICS574MI datasheet ICS574MI pinout ICS574MI datasheet pdf ICS574MI 160 MHz ICS574MI zero delay buffer Renesas ICS574MI ICS574MI 8-SOIC ICS574MI equivalent ICS574MI replacement 574MILF vs ICS574MI ICS574MI FPGA clock distribution ICS574MI price ICS574MI stock ICS574MI clock fanout

Komponen dan Istilah Terkait

Renesas Electronics ICS574MI 574MILF 574 PLL-based zero-delay buffer fanout buffer clock distribution clock and timing IC low jitter low skew CMOS FBIN feedback input 1:4 fanout 160 MHz 3.3 V 8-SOIC FPGA clock distribution processor clock distribution memory-interface clocking backplane clock replication synchronous data acquisition edge alignment controlled-impedance routing
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ