ISO7241MDW - 4-Ch 3/1 150Mbps Digital Isolator | TI
MPN: ISO7241MDW ✓ AktifISO7241MDW Ringkasan
Digital isolators are components that transfer digital signals across an isolation barrier while preventing DC current flow and rejecting common-mode noise. They are essential in systems where safety, noise immunity, or ground potential differences exist between circuit domains. The ISO7241MDW uses a silicon-dioxide (SiO2) isolation barrier, which offers high reliability and long-term stability. It is part of the ISO7240x/ISO7241x/ISO7242x family of quad-channel isolators, which provide various channel configurations and output-enable functions.
Key features of the ISO7241MDW include a low channel-to-channel output skew of 1 ns maximum, low pulse-width distortion (PWD) of 2 ns maximum, and low jitter content of 1 ns typical at 150 Mbps. The device operates over a wide supply voltage range of 3.0 V to 5.5 V on both sides, and it is specified for the industrial temperature range of -40°C to +125°C. The output-enable function allows the outputs to be placed in a high-impedance state, facilitating bus-oriented applications.
The ISO7241MDW is designed for high-speed signal isolation in applications such as industrial fieldbus communication, motor control, power inverters, and isolated SPI/UART interfaces. Its high CMTI ensures reliable operation in noisy environments, and the 2500 Vrms isolation rating meets basic insulation requirements for many industrial standards. The device is RoHS compliant and lead-free, supporting environmentally conscious designs.
When designing with the ISO7241MDW, it is important to provide adequate decoupling capacitors on both supply pins and to ensure proper PCB layout to maintain signal integrity and isolation performance. The device does not require external components for the isolation barrier, simplifying the design. For applications requiring higher isolation or different channel configurations, other members of the ISO724x family can be considered.
Alternatif penggantian untuk ISO7241MDW — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian ISO7241MDW (sama faktor bentuk dan footprint) — berbeda di dalam Data Rate, Number of Channels, Package, Isolation Voltage, CMTI.
ISO7241MDWR
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
ISO7241CDW
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
ISO7241M
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
ISO7240MDW
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
ADUM1401ARWZ
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →ADuM1401BRWZ
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
ISO7241MDW Spesifikasi
| Number of Channels | 4 (3 forward, 1 reverse) |
| Isolation Voltage | 2500 Vrms |
| Laju Data | 150 Mbps |
| Common-Mode Transient Immunity (CMTI) | 25 kV/µs |
| Channel-to-Channel Output Skew | 1 ns max |
| Pulse-Width Distortion (PWD) | 2 ns max |
| Jitter Content | 1 ns typ at 150 Mbps |
| Supply Voltage (VCC1/VCC2) | 3.0 V to 5.5 V |
| Rentang Suhu Kerja | -40°C to +125°C |
| Paket | SOIC-16 (DW) 7.50 mm width |
| Tipe Mounting | Surface Mount |
| Isolation Barrier | Silicon Dioxide (SiO2) |
| Output Enable | Yes |
| Status RoHS | Compliant |
| Lead-Free | Yes |
Konfigurasi Pin ISO7241MDW
| Pin produk 1 | VCC1 — Input side supply voltage (3.0V to 5.5V) |
| Pin produk 2 | GND1 — Input side ground |
| Pin produk 3 | INA — Input channel A (forward) |
| Pin produk 4 | INB — Input channel B (forward) |
| Pin produk 5 | INC — Input channel C (forward) |
| Pin produk 6 | OUTD — Output channel D (reverse) |
| Pin produk 7 | EN — Output enable (active high) |
| Pin produk 8 | GND1 — Input side ground |
| Pin produk 9 | GND2 — Output side ground |
| Pin produk 10 | OUTA — Output channel A (forward) |
| Pin produk 11 | OUTB — Output channel B (forward) |
| Pin produk 12 | OUTC — Output channel C (forward) |
| Pin produk 13 | IND — Input channel D (reverse) |
| Pin produk 14 | NC — No connect |
| Pin produk 15 | GND2 — Output side ground |
| Pin produk 16 | VCC2 — Output side supply voltage (3.0V to 5.5V) |
Aplikasi Umum
ISO7241MDW cocok untuk 6 aplikasis: Industrial Fieldbus Communication, Motor Control and Inverter Drives, Isolated SPI/UART Interfaces, Power Supply and Battery Management, Medical Equipment Isolation, Automotive Electronics.
Industrial Fieldbus Communication
The ISO7241MDW is ideal for industrial fieldbus communication such as PROFIBUS, Modbus, and CAN isolation. Its 150 Mbps data rate and 25 kV/µs CMTI ensure reliable data transfer in noisy factory environments. The 3/1 channel configuration supports bidirectional communication with one reverse channel for acknowledgments. The device's 2500 Vrms isolation protects control electronics from ground loops and voltage transients, enhancing system safety and reliability.
Direkomendasikan
Motor Control and Inverter Drives
In motor control and inverter drives, the ISO7241MDW provides isolation between the microcontroller and gate driver circuits. Its high CMTI (25 kV/µs) prevents false triggering due to fast switching transients from IGBTs or MOSFETs. The 150 Mbps data rate supports high-frequency PWM signals, while the 3/1 channel configuration allows for three forward control signals and one reverse feedback signal. The wide temperature range (-40°C to +125°C) suits harsh industrial environments.
Direkomendasikan
Isolated SPI/UART Interfaces
The ISO7241MDW is well-suited for isolating SPI or UART interfaces between microcontrollers and peripheral devices. Its 150 Mbps data rate easily handles SPI clock speeds up to 50 MHz, and the 3/1 channel configuration matches typical SPI (MOSI, SCLK, CS forward; MISO reverse) or UART (TX forward, RX reverse) signal directions. The low pulse-width distortion (2 ns max) ensures accurate data transmission, and the output enable function allows bus sharing in multi-drop configurations.
Direkomendasikan
Power Supply and Battery Management
In power supply and battery management systems, the ISO7241MDW isolates the control circuitry from high-voltage power stages. It can be used to transmit PWM signals for DC-DC converters or to isolate communication between battery monitoring ICs and the main controller. The 2500 Vrms isolation rating provides protection against voltage spikes, and the high CMTI ensures stable operation in the presence of switching noise. The device's low power consumption is beneficial for battery-powered applications.
Direkomendasikan
Medical Equipment Isolation
The ISO7241MDW is suitable for medical equipment requiring galvanic isolation for patient safety. Its 2500 Vrms isolation rating meets basic insulation requirements for many medical standards. The device's low jitter and high data rate ensure accurate signal transmission in diagnostic and monitoring equipment. The wide temperature range and high reliability make it suitable for long-term use in medical devices. The SiO2 isolation barrier provides stable performance over time.
Direkomendasikan
Automotive Electronics
The ISO7241MDW is designed for automotive applications such as electric vehicle battery management, motor control, and in-vehicle networking. Its -40°C to +125°C temperature range meets automotive requirements, and the 2500 Vrms isolation provides protection against high-voltage transients. The high CMTI (25 kV/µs) ensures reliable operation in the presence of electromagnetic interference from motors and ignition systems. The device is AEC-Q100 qualified, making it suitable for automotive-grade designs.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk ISO7241MDW — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | ISO7241MDWR | ISO7241CDW | ADuM1401ARWZ |
|---|---|---|---|---|
| Package | SOIC-16 (DW) | SOIC-16 (DW) | SOIC-16 (DW) | SOIC-16 (DW) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Analog Devices |
| Number of Channels | 4 (3/1) | 4 (3/1) | 4 (3/1) | 4 (3/1) |
| Isolation Voltage | 2500 Vrms | 2500 Vrms | 2500 Vrms | 2500 Vrms |
| Data Rate | 150 Mbps | 150 Mbps | 150 Mbps | 90 Mbps |
| CMTI | 25 kV/µs | 25 kV/µs | 25 kV/µs | 25 kV/µs |
| Failsafe Output State | Low | Low | High | Low |
| Operating Temperature | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C |
Diferensiator Kunci
- Higher data rate than many competitors (vsADuM1401ARWZ)
- Low pulse-width distortion (vsADuM1401ARWZ)
- Same-brand drop-in variants (vsISO7241CDW)
Catatan Desain
For optimal isolation performance, maintain a minimum creepage distance of 8 mm between the input and output sides on the PCB. Place the isolation barrier under the device and avoid routing copper traces across the barrier. Use a solid ground plane on each side, but do not connect the grounds together except through the isolation barrier. This ensures the 2500 Vrms isolation rating is maintained.
Decouple both VCC1 and VCC2 with 0.1 µF ceramic capacitors placed as close to the pins as possible. Additionally, use a 10 µF bulk capacitor on each supply if the power source is far from the device. This helps maintain stable operation and reduces noise coupling. The device draws minimal quiescent current, but transient currents during switching can cause voltage dips if decoupling is inadequate.
For high-speed signals up to 150 Mbps, keep the trace lengths short and matched between channels to minimize skew. Use controlled impedance traces (e.g., 50 ohms) if the traces are longer than 1 inch. Avoid vias on the signal lines if possible, as they add parasitic capacitance and inductance. The low output skew (1 ns max) of the ISO7241MDW helps maintain timing margins, but PCB layout still plays a critical role.
Informasi Konformitas
RoHS compliant per TI product page. AEC-Q100 qualification not specified for this part; check TI for automotive-grade variants.
