Microchip Technology

KSZ8765CLXCC - 5-Port Managed Ethernet Switch | Microchip

MPN: KSZ8765CLXCC ✓ Aktif
80-pin LQFP, 10 x 10 mm Package
MOQ: 1 |

KSZ8765CLXCC Ringkasan

Microchip Technology KSZ8765CLXCC is an integrated Layer 2-managed Ethernet switch with four 10/100 Mbps copper ports, one 10/100/1000 Mbps Gigabit uplink, and fiber support in an 80-pin LQFP package measuring 10 x 10 mm. It supports GMII, RGMII, MII, and RMII interfaces, allowing flexible connection to network processors, switching fabrics, and embedded Ethernet equipment.

An Ethernet switch is a semiconductor that forwards Ethernet frames between multiple physical ports while reducing the need for separate switching hardware on each link. The KSZ8765 belongs to the managed-switch hierarchy: Ethernet switch, Layer 2 network switch, interface IC, and integrated circuit. Its five-port arrangement combines copper Ethernet connectivity with a gigabit uplink, making it suitable for compact embedded network infrastructure where board area and interface flexibility are important.

The primary features include four 10/100 Mbps copper ports, one Gigabit port, integrated 10/100 Base-FX/T/TX PHY support, and both legacy MII/RMII and gigabit GMII/RGMII interfaces. Layer 2 management adds value in access equipment, industrial controls, network appliances, and test systems where individual port configuration, traffic prioritization, or centralized switching behavior can simplify firmware and board design.

The combination of MII, RMII, GMII, and RGMII support distinguishes the KSZ8765 from simpler unmanaged Ethernet switches. A host processor can connect through RMII or MII for 10/100 Mbps designs, while GMII or RGMII supports a Gigabit data path. This range of host interfaces permits one switch platform to address multiple processor architectures and clocking arrangements without changing the external Ethernet-port topology.

Typical uses include industrial Ethernet gateways, embedded network appliances, communication equipment, test and measurement systems, and access-control infrastructure. The four copper ports support device-to-device links, while the Gigabit port can provide a higher-bandwidth uplink to a router, control processor, or backplane. Fiber-capable operation is useful where longer-distance links or galvanic-isolation requirements make copper unsuitable.

PCB design must account for the 10 x 10 mm LQFP footprint, high-speed interface constraints, proper decoupling, and controlled impedance routing for GMII and RGMII links. Review the Microchip reference design and pin-description table to assign power, ground, clocks, management signals, and PHY connections before releasing the layout.

This page combines the Microchip product definition, package and interface information, application guidance, and same-family drop-in alternatives. It also highlights the design decisions that matter when moving between temperature-grade variants of the KSZ8765 while retaining the same 80-pin LQFP footprint.

Alternatif penggantian untuk KSZ8765CLXCC — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

KSZ8765CLXCM

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 80-pin LQFP (10 x 10 mm)
Same KSZ8765 five-port architecture, GMII/RGMII/MII/RMII interfaces, and 80-pin LQFP footprint; ordering suffix differs by 0% in core port and interface ratings, while temperature-grade limits require verification.

📋 Alternatif referensi (tidak dalam katalog)

KSZ8765CLXCT

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 80-pin LQFP (10 x 10 mm)
Same five-port managed-switch configuration and 80-pin LQFP pinout; ordering suffix differs by 0% in port count and named host-interface support, while temperature-grade limits require verification.

📋 Alternatif referensi (tidak dalam katalog)

KSZ8765CLXCB

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 80-pin LQFP (10 x 10 mm)
Same KSZ8765 package and managed five-port interface architecture; suffix changes the ordering configuration with 0% difference in stated port counts and interface types, subject to suffix-level qualification review.

📋 Alternatif referensi (tidak dalam katalog)

KSZ8765CLXC

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 80-pin LQFP (10 x 10 mm)
Base KSZ8765CLXC ordering code retains the same 80-pin LQFP footprint and 0% difference in core port and host-interface counts; verify the exact commercial suffix and temperature grade before substitution.

📋 Alternatif referensi (tidak dalam katalog)

KSZ8765CLXCC Rating Maksimal & Karakteristik Listrik

Product Type Layer 2-managed Ethernet switch
Total Port Count 5 ports
10/100 Mbps Copper Port Count 4 ports
Gigabit Port Count 1 port
Maximum Gigabit Ethernet Rate 1000 Mbps
Maximum 10/100 Ethernet Rate 100 Mbps per copper port
Copper Media Support 10/100 Base-TX
Fiber Media Support 10/100 Base-FX/T/TX PHY
Management Layer Layer 2
Host Interface Support GMII, RGMII, MII, and RMII
Paket 80-pin LQFP, 10 x 10 mm
Tipe Mounting Surface mount

KSZ8765CLXCC 80-pin lqfp, 10 x 10 mm Diamant Konfigurasi Panduan

Konfigurasi pin untuk KSZ8765CLXCC (80-pin lqfp, 10 x 10 mm pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.

Diamant diagram pakai pakai 80-pin lqfp, 10 x 10 mm untuk KSZ8765CLXCC

Tidak ada data diatribut pin yang tersedia untuk KSZ8765CLXCC.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

KSZ8765CLXCC cocok untuk 6 aplikasis: Industrial Ethernet Gateway, Embedded Network Appliance, Communication Equipment, Fiber-to-Copper Network Bridge, Test and Measurement System, Network Access Equipment.

🏭

Industrial Ethernet Gateway

The KSZ8765CLXCC fits an industrial gateway that must aggregate four 10/100 Mbps field-device connections while maintaining a 1,000 Mbps uplink to a controller or network server. The four copper ports provide direct links for sensors, HMIs, and remote equipment, while the Gigabit port separates backbone traffic from slower local traffic. Its GMII and RGMII options allow a high-performance embedded processor to connect without requiring separate switching devices. The 80-pin LQFP package also consolidates five network positions into a 10 x 10 mm footprint. For industrial deployment, confirm the ordering code's temperature range, power regulation, isolation strategy, and grounding requirements before releasing the production design.

🖥️

Embedded Network Appliance

The KSZ8765CLXCC is useful in compact network appliances that combine several Fast Ethernet device ports with a higher-speed uplink. Its Layer 2-managed architecture provides a more capable switching platform than a basic repeater or hub, while four 10/100 Mbps copper ports support downstream service modules. The fifth Gigabit connection can carry aggregated traffic toward a host processor or upstream router. MII and RMII options help simplify designs based on 10/100 Mbps processors, whereas GMII and RGMII support Gigabit-class host connections. A key design consideration is maintaining signal integrity on parallel high-speed interfaces through short, impedance-controlled traces, continuous reference planes, and correct clocking.

🌐

Communication Equipment

The KSZ8765CLXCC supports communication equipment architectures that need to consolidate several copper endpoints before presenting a single uplink to the system. Four 10/100 Mbps ports can serve management, data, and service connections, while the Gigabit port provides a high-bandwidth path to a baseband processor, FPGA, or switching fabric. Managed Layer 2 operation can support organized traffic handling in access, transport, or customer-premises equipment. Its 80-pin LQFP package limits board footprint but requires careful escape routing from all 80 leads. Designers should use the Microchip reference design to plan power-plane distribution, decoupling, media magnetics isolation, and RGMII or GMII timing topology.

🔧

Fiber-to-Copper Network Bridge

The KSZ8765CLXCC is appropriate for mixed-media infrastructure because it combines four 10/100 Mbps copper ports with 10/100 Base-FX/T/TX PHY support. Copper links can connect nearby Ethernet devices, while a fiber-capable connection can extend the network where link distance, electrical isolation, or cabling topology makes copper less suitable. The host-facing side can use RGMII, GMII, RMII, or MII according to the processing platform and required throughput. This makes the switch useful at the boundary between local wired equipment and a fiber uplink. Fiber implementation requires compatible optical components and proper isolation, while copper ports require correctly selected magnetics and a layout that preserves Ethernet return-path performance.

🔬

Test and Measurement System

The KSZ8765CLXCC can serve as the network hub in test and measurement equipment that must connect several instruments, service computers, or embedded controllers. Four 10/100 Mbps ports handle routine management and synchronization traffic, while the Gigabit port provides a higher-bandwidth path for bulk test data. Layer 2 management supports a structured switched network instead of an unmanaged shared-medium arrangement. RMII is particularly useful with modest embedded controllers, while RGMII or GMII offers more bandwidth when an FPGA or high-performance processor drives the switch. Layout quality is essential: isolate Ethernet media circuits from sensitive analog sections, provide low-impedance power distribution, and follow the manufacturer's clock and termination recommendations.

🌐

Network Access Equipment

The KSZ8765CLXCC is suitable for access equipment where multiple endpoint connections must be consolidated behind a single managed uplink. Its four Fast Ethernet copper ports can connect service terminals or local network nodes, while the Gigabit port connects the equipment to a router, aggregation switch, or processor-based control plane. Layer 2 management is valuable where operators need controlled traffic behavior without introducing a higher-cost packet-processing architecture. Because the device offers MII, RMII, GMII, and RGMII, it can support both legacy 10/100 Mbps controllers and newer Gigabit host processors. Before layout release, verify the exact suffix temperature grade, confirm regulator headroom for all five ports, and implement the Microchip reference network topology for media interfaces.

What is the KSZ8765CLXCC?
The KSZ8765CLXCC is a Microchip Technology Layer 2-managed Ethernet switch with four 10/100 Mbps copper ports, one 10/100/1000 Mbps Gigabit port, and fiber support. According to the Microchip KSZ8765 product page, the device is intended for cost-sensitive systems requiring four 10/100 Mbps copper connections and one Gigabit uplink, and it is supplied in an 80-pin LQFP package.
How many Ethernet ports does the KSZ8765CLXCC provide?
The KSZ8765CLXCC provides five physical network positions in total: four 10/100 Mbps copper ports and one 10/100/1000 Mbps Gigabit port. The Microchip KSZ8765 family description identifies four Fast Ethernet copper ports and one Gigabit uplink, allowing a compact device to connect multiple nodes while retaining a higher-bandwidth path to a router or processor.
Which host interfaces are supported by the KSZ8765CLXCC?
The KSZ8765CLXCC supports GMII, RGMII, MII, and RMII host interfaces. According to the Microchip KSZ8765 product information, this combination covers Gigabit parallel interfaces and 10/100 Mbps parallel interfaces, allowing the switch to connect to processors with different data widths, clock arrangements, and media-access requirements.
Does the KSZ8765CLXCC support fiber Ethernet?
Yes, the KSZ8765CLXCC includes support for 10/100 Base-FX/T/TX PHY operation in addition to its 10/100 Mbps copper connectivity. DigiKey describes the device as an Ethernet switch with 10/100 Base-FX/T/TX PHY and MII/RMII interfaces, while the Microchip family description identifies a five-port managed-switch architecture with fiber support.
Where can I download the KSZ8765CLXCC datasheet PDF?
The KSZ8765 datasheet can be accessed through the Microchip KSZ8765 product page at https://www.microchip.com/en-us/product/KSZ8765. Use the manufacturer datasheet for the authoritative pin descriptions, electrical characteristics, interface timing, register map, and recommended application circuit. The package is an 80-pin LQFP measuring 10 x 10 mm.
Where can I find the KSZ8765CLXCC pinout?
The KSZ8765CLXCC pinout is documented in the pin-description table of the Microchip KSZ8765 manufacturer datasheet. The device uses an 80-pin LQFP package, so verify every power, ground, management, PHY, and host-interface assignment against that table before laying out the PCB or assembling a replacement.
What is the KSZ8765CLXCC package?
The KSZ8765CLXCC is packaged in an 80-pin LQFP measuring 10 x 10 mm. The package information appears in the Microchip KSZ8765 family description and the component listing, and it is a surface-mount design intended for compact embedded networking equipment and industrial Ethernet products.
Can KSZ8765CLXCM replace KSZ8765CLXCC without changing the PCB?
The KSZ8765CLXCM is a same-family candidate for a drop-in consideration because it uses the KSZ8765 80-pin LQFP architecture, but the device suffix must be checked for temperature grade and orderable configuration. According to the Microchip KSZ8765 family information, both parts belong to the same five-port managed-switch platform; verify the exact suffix limits before production release.
What is the best drop-in replacement for KSZ8765CLXCC?
The best drop-in candidate is a KSZ8765 family ordering code that retains the 80-pin LQFP footprint while matching the required temperature grade and functional configuration. KSZ8765CLXCM and KSZ8765CLXCT are same-family options for evaluation, but the manufacturer ordering table should determine whether the electrical features, temperature limits, and lifecycle status are identical to the KSZ8765CLXCC.
Is KSZ8765CLXCC suitable for an industrial Ethernet gateway?
The KSZ8765CLXCC is suitable for an industrial Ethernet gateway when its temperature grade, power requirements, and regulatory needs match the deployment. Its four 10/100 Mbps copper ports connect local field devices, while the Gigabit port supports an uplink to a controller or router; industrial qualification still depends on the specific ordering code and operating-temperature limits.
KSZ8765CLXCC vs KSZ8765CLXCM — which is better for extended-temperature operation?
KSZ8765CLXCM may be preferable for extended-temperature operation, but the decision must be based on the exact temperature ranges printed in the Microchip ordering information. Both devices use the same 80-pin LQFP KSZ8765 family architecture and provide four 10/100 Mbps copper ports plus one Gigabit port, so the ordering suffix and operating limits are the decisive engineering checks.
When should I choose KSZ8765CLXCC over a simpler Ethernet switch?
Choose the KSZ8765CLXCC when the system needs four 10/100 Mbps copper links, a Gigabit uplink, fiber-capable connectivity, Layer 2 management, and flexible GMII/RGMII/MII/RMII host attachment. A simpler unmanaged switch is appropriate when only basic frame forwarding is required and local configuration, traffic management, or multiple host-interface options are unnecessary.
How do I request the current price and lead time for KSZ8765CLXCC?
Use the Request a Quote form on this page to request the current price, stock position, and lead time for KSZ8765CLXCC. The form is the appropriate channel because component availability and commercial terms can change quickly. Include the required quantity, package variant, target date, and any automotive or industrial qualification requirements with the request.
Is KSZ8765CLXCC in stock?
The current stock position for KSZ8765CLXCC should be confirmed through the Request a Quote form on this page. Inventory varies by package suffix and order quantity, so a listing that shows one configuration cannot establish universal availability. Providing the required quantity and delivery schedule enables a current supply response.
What are the key specifications engineers should know about KSZ8765CLXCC?
The key KSZ8765CLXCC specifications are five managed Ethernet ports, four 10/100 Mbps copper connections, one 10/100/1000 Mbps Gigabit uplink, 10/100 Base-FX/T/TX fiber support, and GMII/RGMII/MII/RMII host interfaces. According to the Microchip KSZ8765 product page, the device is a Layer 2-managed switch packaged in an 80-pin, 10 x 10 mm LQFP.
What can replace the KSZ8765CLXCC on an existing PCB?
A replacement should use the same KSZ8765 family and 80-pin LQFP footprint, with matching pin assignment and electrical characteristics. KSZ8765CLXCM and KSZ8765CLXCT are same-family candidates to evaluate, but temperature grade, suffix code, lifecycle status, and exposed-pad or thermal requirements must match. A cross-brand replacement should be accepted only after a complete pin and timing comparison.

Data referensi engineering untuk KSZ8765CLXCC — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the KSZ8765CLXCC when the system needs a compact Layer 2-managed switch with four 10/100 Mbps copper ports, one 1,000 Mbps uplink, fiber-capable connectivity, and flexible host attachment through GMII, RGMII, MII, or RMII. It is particularly suitable for industrial gateways, communication equipment, embedded appliances, and test systems where multiple edge connections must be consolidated behind a faster uplink. Consider KSZ8765CLXCM or KSZ8765CLXCT when the same family architecture and 80-pin LQFP footprint are required but the ordering suffix provides a different temperature or configuration option. KSZ8765CLXCB and KSZ8765CLXC are also family candidates that require suffix-level qualification. For every candidate, verify operating-temperature limits, supply requirements, clocking, strap settings, management behavior, and lifecycle status. Do not approve a replacement solely because it fits the PCB footprint.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini KSZ8765CLXCM KSZ8765CLXCT KSZ8765CLXCB KSZ8765CLXC
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 80-pin LQFP (10 x 10 mm) 80-pin LQFP (10 x 10 mm) 80-pin LQFP (10 x 10 mm) 80-pin LQFP (10 x 10 mm) 80-pin LQFP (10 x 10 mm)
Product Type Layer 2-managed Ethernet switch Layer 2-managed Ethernet switch Layer 2-managed Ethernet switch Layer 2-managed Ethernet switch Layer 2-managed Ethernet switch
Total Port Count 5 ports 5 ports 5 ports 5 ports 5 ports
10/100 Mbps Copper Ports 4 ports 4 ports 4 ports 4 ports 4 ports
Gigabit Uplink 1 port at up to 1000 Mbps 1 port at up to 1000 Mbps 1 port at up to 1000 Mbps 1 port at up to 1000 Mbps 1 port at up to 1000 Mbps
Host Interfaces GMII, RGMII, MII, and RMII GMII, RGMII, MII, and RMII GMII, RGMII, MII, and RMII GMII, RGMII, MII, and RMII GMII, RGMII, MII, and RMII
Fiber PHY Support 10/100 Base-FX/T/TX PHY KSZ8765 family fiber-capable configuration KSZ8765 family fiber-capable configuration KSZ8765 family fiber-capable configuration KSZ8765 family fiber-capable configuration

Diferensiator Kunci

  • Combines four Fast Ethernet copper ports with one Gigabit uplink (vsKSZ8765CLXCM)
  • Supports four host-interface styles on the same switch family (vsKSZ8765CLXCT)
  • Adds fiber-capable PHY support to the managed switch (vsKSZ8765CLXCB)

Catatan Desain

Route GMII and RGMII signals over continuous reference planes with short point-to-point connections, compliant via transitions, and no stubs. Keep clock distribution symmetric and isolate high-speed switching nodes from analog and magnetics areas. The 80-pin LQFP has closely spaced perimeter leads, so careful escape routing is necessary to maintain the timing margin expected of Gigabit and 100 MHz-class interfaces.

Divide the supply network into dedicated analog, digital, and I/O branches where the manufacturer reference design recommends separation. Place bulk and high-frequency decoupling capacitors at the associated pins, with short ground paths and a low-impedance ground plane. Validate regulator headroom with all four copper ports and the Gigabit port operating simultaneously; Ethernet switching transients must not pull the core supply outside its operating limits.

Do not treat every KSZ8765 ordering suffix as an unconditional substitute. Confirm the exact temperature grade, lead-free finish, tray or reel configuration, lifecycle status, and exposed thermal requirements in the Microchip ordering information. Also verify management access, PHY strap settings, reference-clock source, and media-magnetics choices against the reference design, since a footprint match alone does not guarantee identical board behavior.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

Compliance attributes require confirmation from the manufacturer product page or the exact ordering information.

Data disahkan pada: 2026-11-14 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

KSZ8765CLXCC datasheet KSZ8765CLXCC pinout KSZ8765CLXCC datasheet pdf KSZ8765CLXCC equivalent KSZ8765CLXCC replacement KSZ8765CLXCC cross reference KSZ8765CLXCC vs KSZ8765CLXCM KSZ8765CLXCC footprint KSZ8765CLXCC application circuit KSZ8765CLXCC price KSZ8765CLXCC stock Microchip KSZ8765CLXCC

Komponen dan Istilah Terkait

Microchip Technology KSZ8765CLXCC KSZ8765CLXCM KSZ8765CLXCT KSZ8765CLXCB KSZ8765CLXC Ethernet switch managed Ethernet switch Layer 2 switch interface IC integrated circuit Ethernet 10/100 Base-TX 10/100 Base-FX Gigabit Ethernet 1000 Mbps GMII RGMII MII RMII 80-pin LQFP LQFP package family surface-mount package industrial Ethernet gateway fiber-to-copper network bridge
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ