KSZ8765CLXCC - 5-Port Managed Ethernet Switch | Microchip
MPN: KSZ8765CLXCC ✓ NakahandaKSZ8765CLXCC Ulas
An Ethernet switch is a semiconductor that forwards Ethernet frames between multiple physical ports while reducing the need for separate switching hardware on each link. The KSZ8765 belongs to the managed-switch hierarchy: Ethernet switch, Layer 2 network switch, interface IC, and integrated circuit. Its five-port arrangement combines copper Ethernet connectivity with a gigabit uplink, making it suitable for compact embedded network infrastructure where board area and interface flexibility are important.
The primary features include four 10/100 Mbps copper ports, one Gigabit port, integrated 10/100 Base-FX/T/TX PHY support, and both legacy MII/RMII and gigabit GMII/RGMII interfaces. Layer 2 management adds value in access equipment, industrial controls, network appliances, and test systems where individual port configuration, traffic prioritization, or centralized switching behavior can simplify firmware and board design.
The combination of MII, RMII, GMII, and RGMII support distinguishes the KSZ8765 from simpler unmanaged Ethernet switches. A host processor can connect through RMII or MII for 10/100 Mbps designs, while GMII or RGMII supports a Gigabit data path. This range of host interfaces permits one switch platform to address multiple processor architectures and clocking arrangements without changing the external Ethernet-port topology.
Typical uses include industrial Ethernet gateways, embedded network appliances, communication equipment, test and measurement systems, and access-control infrastructure. The four copper ports support device-to-device links, while the Gigabit port can provide a higher-bandwidth uplink to a router, control processor, or backplane. Fiber-capable operation is useful where longer-distance links or galvanic-isolation requirements make copper unsuitable.
PCB design must account for the 10 x 10 mm LQFP footprint, high-speed interface constraints, proper decoupling, and controlled impedance routing for GMII and RGMII links. Review the Microchip reference design and pin-description table to assign power, ground, clocks, management signals, and PHY connections before releasing the layout.
This page combines the Microchip product definition, package and interface information, application guidance, and same-family drop-in alternatives. It also highlights the design decisions that matter when moving between temperature-grade variants of the KSZ8765 while retaining the same 80-pin LQFP footprint.
Mga alternatibo na pwedeng ilagay na KSZ8765CLXCC — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
KSZ8765CLXCM
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
KSZ8765CLXCT
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
KSZ8765CLXCB
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
KSZ8765CLXC
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
KSZ8765CLXCC Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | Layer 2-managed Ethernet switch |
| Total Port Count | 5 ports |
| 10/100 Mbps Copper Port Count | 4 ports |
| Gigabit Port Count | 1 port |
| Maximum Gigabit Ethernet Rate | 1000 Mbps |
| Maximum 10/100 Ethernet Rate | 100 Mbps per copper port |
| Copper Media Support | 10/100 Base-TX |
| Fiber Media Support | 10/100 Base-FX/T/TX PHY |
| Management Layer | Layer 2 |
| Host Interface Support | GMII, RGMII, MII, and RMII |
| Packhaging | 80-pin LQFP, 10 x 10 mm |
| Uri ng Pagpapasok | Surface mount |
Gabay sa Pin Configuration ng KSZ8765CLXCC 80-pin lqfp, 10 x 10 mm
Pin configuration para sa KSZ8765CLXCC (80-pin lqfp, 10 x 10 mm package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa KSZ8765CLXCC.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
KSZ8765CLXCC ay nararapat para sa 6 aplikasyons: Industrial Ethernet Gateway, Embedded Network Appliance, Communication Equipment, Fiber-to-Copper Network Bridge, Test and Measurement System, Network Access Equipment.
Industrial Ethernet Gateway
The KSZ8765CLXCC fits an industrial gateway that must aggregate four 10/100 Mbps field-device connections while maintaining a 1,000 Mbps uplink to a controller or network server. The four copper ports provide direct links for sensors, HMIs, and remote equipment, while the Gigabit port separates backbone traffic from slower local traffic. Its GMII and RGMII options allow a high-performance embedded processor to connect without requiring separate switching devices. The 80-pin LQFP package also consolidates five network positions into a 10 x 10 mm footprint. For industrial deployment, confirm the ordering code's temperature range, power regulation, isolation strategy, and grounding requirements before releasing the production design.
Inirekomenda
Embedded Network Appliance
The KSZ8765CLXCC is useful in compact network appliances that combine several Fast Ethernet device ports with a higher-speed uplink. Its Layer 2-managed architecture provides a more capable switching platform than a basic repeater or hub, while four 10/100 Mbps copper ports support downstream service modules. The fifth Gigabit connection can carry aggregated traffic toward a host processor or upstream router. MII and RMII options help simplify designs based on 10/100 Mbps processors, whereas GMII and RGMII support Gigabit-class host connections. A key design consideration is maintaining signal integrity on parallel high-speed interfaces through short, impedance-controlled traces, continuous reference planes, and correct clocking.
Inirekomenda
Communication Equipment
The KSZ8765CLXCC supports communication equipment architectures that need to consolidate several copper endpoints before presenting a single uplink to the system. Four 10/100 Mbps ports can serve management, data, and service connections, while the Gigabit port provides a high-bandwidth path to a baseband processor, FPGA, or switching fabric. Managed Layer 2 operation can support organized traffic handling in access, transport, or customer-premises equipment. Its 80-pin LQFP package limits board footprint but requires careful escape routing from all 80 leads. Designers should use the Microchip reference design to plan power-plane distribution, decoupling, media magnetics isolation, and RGMII or GMII timing topology.
Inirekomenda
Fiber-to-Copper Network Bridge
The KSZ8765CLXCC is appropriate for mixed-media infrastructure because it combines four 10/100 Mbps copper ports with 10/100 Base-FX/T/TX PHY support. Copper links can connect nearby Ethernet devices, while a fiber-capable connection can extend the network where link distance, electrical isolation, or cabling topology makes copper less suitable. The host-facing side can use RGMII, GMII, RMII, or MII according to the processing platform and required throughput. This makes the switch useful at the boundary between local wired equipment and a fiber uplink. Fiber implementation requires compatible optical components and proper isolation, while copper ports require correctly selected magnetics and a layout that preserves Ethernet return-path performance.
Inirekomenda
Test and Measurement System
The KSZ8765CLXCC can serve as the network hub in test and measurement equipment that must connect several instruments, service computers, or embedded controllers. Four 10/100 Mbps ports handle routine management and synchronization traffic, while the Gigabit port provides a higher-bandwidth path for bulk test data. Layer 2 management supports a structured switched network instead of an unmanaged shared-medium arrangement. RMII is particularly useful with modest embedded controllers, while RGMII or GMII offers more bandwidth when an FPGA or high-performance processor drives the switch. Layout quality is essential: isolate Ethernet media circuits from sensitive analog sections, provide low-impedance power distribution, and follow the manufacturer's clock and termination recommendations.
Inirekomenda
Network Access Equipment
The KSZ8765CLXCC is suitable for access equipment where multiple endpoint connections must be consolidated behind a single managed uplink. Its four Fast Ethernet copper ports can connect service terminals or local network nodes, while the Gigabit port connects the equipment to a router, aggregation switch, or processor-based control plane. Layer 2 management is valuable where operators need controlled traffic behavior without introducing a higher-cost packet-processing architecture. Because the device offers MII, RMII, GMII, and RGMII, it can support both legacy 10/100 Mbps controllers and newer Gigabit host processors. Before layout release, verify the exact suffix temperature grade, confirm regulator headroom for all five ports, and implement the Microchip reference network topology for media interfaces.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for KSZ8765CLXCC — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | KSZ8765CLXCM | KSZ8765CLXCT | KSZ8765CLXCB | KSZ8765CLXC |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 80-pin LQFP (10 x 10 mm) | 80-pin LQFP (10 x 10 mm) | 80-pin LQFP (10 x 10 mm) | 80-pin LQFP (10 x 10 mm) | 80-pin LQFP (10 x 10 mm) |
| Product Type | Layer 2-managed Ethernet switch | Layer 2-managed Ethernet switch | Layer 2-managed Ethernet switch | Layer 2-managed Ethernet switch | Layer 2-managed Ethernet switch |
| Total Port Count | 5 ports | 5 ports | 5 ports | 5 ports | 5 ports |
| 10/100 Mbps Copper Ports | 4 ports | 4 ports | 4 ports | 4 ports | 4 ports |
| Gigabit Uplink | 1 port at up to 1000 Mbps | 1 port at up to 1000 Mbps | 1 port at up to 1000 Mbps | 1 port at up to 1000 Mbps | 1 port at up to 1000 Mbps |
| Host Interfaces | GMII, RGMII, MII, and RMII | GMII, RGMII, MII, and RMII | GMII, RGMII, MII, and RMII | GMII, RGMII, MII, and RMII | GMII, RGMII, MII, and RMII |
| Fiber PHY Support | 10/100 Base-FX/T/TX PHY | KSZ8765 family fiber-capable configuration | KSZ8765 family fiber-capable configuration | KSZ8765 family fiber-capable configuration | KSZ8765 family fiber-capable configuration |
Pangunahing mga Pagkakaiba
- Combines four Fast Ethernet copper ports with one Gigabit uplink (kumpara saKSZ8765CLXCM)
- Supports four host-interface styles on the same switch family (kumpara saKSZ8765CLXCT)
- Adds fiber-capable PHY support to the managed switch (kumpara saKSZ8765CLXCB)
Talaan ng Disenyo
Route GMII and RGMII signals over continuous reference planes with short point-to-point connections, compliant via transitions, and no stubs. Keep clock distribution symmetric and isolate high-speed switching nodes from analog and magnetics areas. The 80-pin LQFP has closely spaced perimeter leads, so careful escape routing is necessary to maintain the timing margin expected of Gigabit and 100 MHz-class interfaces.
Divide the supply network into dedicated analog, digital, and I/O branches where the manufacturer reference design recommends separation. Place bulk and high-frequency decoupling capacitors at the associated pins, with short ground paths and a low-impedance ground plane. Validate regulator headroom with all four copper ports and the Gigabit port operating simultaneously; Ethernet switching transients must not pull the core supply outside its operating limits.
Do not treat every KSZ8765 ordering suffix as an unconditional substitute. Confirm the exact temperature grade, lead-free finish, tray or reel configuration, lifecycle status, and exposed thermal requirements in the Microchip ordering information. Also verify management access, PHY strap settings, reference-clock source, and media-magnetics choices against the reference design, since a footprint match alone does not guarantee identical board behavior.
Impormasyon ng Pagsunod sa Kautusan
Compliance attributes require confirmation from the manufacturer product page or the exact ordering information.