Microchip Technology

KSZ8863FLLI-TR - 3-Port 10/100 Managed Ethernet Switch | Microchip Technology (Tape & Reel)

MPN: KSZ8863FLLI-TR ✓ Aktif
48-LQFP (7x7 mm) Package
MOQ: 1 |

KSZ8863FLLI-TR Ringkasan

The Microchip Technology KSZ8863FLLI-TR is a highly integrated 3-port 10/100 managed Ethernet switch with fiber support, packaged in a 48-LQFP 7x7 mm package. It is designed for cost-sensitive, power-efficient low-port-count network systems and provides integrated 10/100 Ethernet PHYs with I2C and SPI control interfaces. The device supports 10 Mbps and 100 Mbps data rates and is identified as a 3-port Ethernet switch controller with Base-FX/T/TX PHY functionality.

An Ethernet switch controller is an interface IC that integrates multiple physical-layer transceivers and switching logic into one device. It sits within the hierarchy of Ethernet interface ICs, network controllers, semiconductors, and broader communications equipment. By combining copper and fiber-oriented connectivity in a compact package, the KSZ8863 family is intended to reduce external component count in embedded gateways, industrial controllers, access equipment, and compact network appliances.

The KSZ8863FLLI-TR includes support for optical fiber, cable diagnostics, programmable LED indication, and a low-power operating mode. Its managed-switch architecture supports controlled network segmentation and status indication, while the integrated PHYs simplify connections to 10/100BASE-T and fiber-capable downstream equipment. The I2C and SPI interfaces provide host access for configuration and management functions. According to the manufacturer product description, the KSZ8863 series is cost-sensitive, power efficient, and optimized for low-port-count switching systems.

The family variants use different suffix options to address product and ordering requirements while retaining a closely related 3-port 10/100 managed-switch architecture. The KSZ8863FLLI-TR is supplied in a 48-LQFP package, enabling conventional surface-mount assembly in industrial and embedded equipment. Its operating temperature range is specified as -40°C to +85°C, making it suitable for extended industrial environments. The 100 Mbps data rate and fiber support distinguish it from basic single-port Ethernet PHY devices.

Typical applications include industrial Ethernet gateways, serial-to-Ethernet equipment, access-point controllers, factory automation nodes, and compact embedded network appliances. Because the device combines managed switching, integrated PHYs, programmable LEDs, and low-power operation, it can simplify board design where a small network topology must operate without a discrete switch and multiple PHY packages.

The main design consideration is power and signal integrity: place the device and its decoupling network according to the manufacturer reference layout, keep high-speed traces controlled, and validate Ethernet magnetics or fiber interfaces in the final board design. Also confirm the exact fiber, LED, and management configuration for the selected KSZ8863 variant before production release.

This product page combines the verified manufacturer and distributor information, identifies package and interface details, and provides practical guidance for Ethernet switch design, sourcing, and qualification. The documented alternatives are organized by manufacturer priority and intended for engineering comparison rather than as automatic substitutions without footprint and configuration verification.

Alternatif penggantian untuk KSZ8863FLLI-TR — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian KSZ8863FLLI-TR (sama faktor bentuk dan footprint) — berbeda di dalam Ethernet Data Rate, Fiber Support, Package, Copper Ethernet Support, Power Consumption.

Microchip Technology
Ethernet Data Rate: 10/100 Mbps
Fiber Support: Supported
Package: 48-LQFP, 7 mm x 7 mm
Bandingkan dengan KSZ8863FLLI-TR →
Microchip Technology
Ethernet Data Rate: 10/100 Mbps
Fiber Support: Supported
Copper Ethernet Support: 10/100BASE-T
Bandingkan dengan KSZ8863FLLI-TR →

KSZ8863MLLI

✅ Drop-In
Microchip Technology
📦 48-LQFP (7x7 mm)
3 ports · 10/100 Mbps · Managed Ethernet switch with integrated PHYs · I2C and SPI · 1 MII interface · Supported · 48-LQFP, 7 mm x 7 mm · Surface mount

Kontak untuk harga

Lihat Datasheet →

KSZ8863RLL

✅ Drop-In
Microchip Technology
📦 48-LQFP (7x7 mm)
Managed Ethernet switch with integrated PHYs · 3 ports · 10/100 Mbps · 10/100BASE-T · Supported · I2C and SPI · 48-LQFP (7x7 mm) · Surface mount

Kontak untuk harga

Lihat Datasheet →

KSZ8851-16MLL

✅ Drop-In
📦 48-LQFP (7x7 mm)
Microchip Ethernet switch alternative with 16-port family positioning; port-count and feature differences require engineering review, with parameter proximity estimated at 70%.

📋 Alternatif referensi (tidak dalam katalog)

KSZ8863FLLI-TR Rating Maksimal & Karakteristik Listrik

Product Type 3-Port 10/100 Managed Ethernet Switch Controller
Number of Ports 3 ports
Ethernet Data Rate 10 Mbps and 100 Mbps
Fiber Support Yes
Copper Ethernet Support 10/100 Base-TX
Management Interface I2C and SPI
Switch Architecture Managed 3-port switch with integrated PHYs
Paket 48-LQFP (7x7 mm)
Jumlah Pin 48 pins
Tipe Mounting Surface Mount
Rentang Suhu Kerja -40°C to +85°C
Cable Diagnostics Supported
Programmable LED Indication Supported
Low-Power Mode Supported
AEC-Q100 Qualification not_applicable

KSZ8863FLLI-TR 48-lqfp (7x7 mm) Diamant Konfigurasi Panduan

Konfigurasi pin untuk KSZ8863FLLI-TR (48-lqfp (7x7 mm) pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.

Diamant diagram pakai pakai 48-lqfp (7x7 mm) untuk KSZ8863FLLI-TR

Tidak ada data diatribut pin yang tersedia untuk KSZ8863FLLI-TR.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

KSZ8863FLLI-TR cocok untuk 6 aplikasis: Industrial Ethernet Gateway, Fiber-Capable Access Equipment, Factory Automation Network Node, Embedded Network Appliance, Serial-to-Ethernet Converter, Compact Network Power Supply Controller.

🏭

Industrial Ethernet Gateway

The KSZ8863FLLI-TR is well suited to a compact industrial Ethernet gateway because it combines a 3-port 10/100 managed switch with integrated PHYs and fiber support in one 48-LQFP 7x7 mm device. A gateway can use the managed architecture to organize copper and fiber-facing links while I2C or SPI provides host access for configuration. Its -40°C to +85°C operating range supports extended industrial environments, while programmable LED indication helps expose port status to operators. Cable diagnostics can reduce commissioning effort by identifying network faults. The design must still account for the specific media interfaces, external magnetics or fiber components, supply requirements, and thermal conditions.

🌐

Fiber-Capable Access Equipment

KSZ8863FLLI-TR is appropriate for access equipment that must combine 10/100 Mbps copper connectivity with a fiber-oriented link in a small board area. The integrated three-port managed switch and fiber support can reduce the number of separate Ethernet interface devices required in compact access nodes. Its cable-diagnostics capability helps installation and maintenance teams identify link problems, while programmable LED indication supports front-panel status design. I2C and SPI interfaces allow a host processor to configure the switch and monitor status. Before layout release, confirm the exact fiber PHY arrangement, isolation strategy, connector requirements, and external component recommendations in the KSZ8863 documentation.

🏭

Factory Automation Network Node

The KSZ8863FLLI-TR can provide a compact, managed Ethernet connection point in factory automation equipment where three 10/100 Mbps ports and extended-temperature operation are useful. Managed switching helps segment equipment traffic, while the low-power mode supports systems that need to reduce energy consumption during idle periods. The 48-LQFP package supports standard surface-mount manufacturing and a relatively compact solution compared with multiple discrete PHY and switch components. Cable diagnostics provide practical field-maintenance benefits, and programmable LEDs can indicate link and activity status. A complete industrial design should still validate electromagnetic immunity, isolation, grounding, Ethernet cable compatibility, and functional safety requirements where applicable.

🖥️

Embedded Network Appliance

The KSZ8863FLLI-TR fits embedded appliances requiring several Ethernet links without the footprint of a larger switch platform. Its three-port 10/100 managed architecture can support equipment-to-equipment links, a service uplink, and a management connection in a single controller. I2C and SPI control allow an embedded host to initialize the switch and implement link policies, while programmable LEDs provide a simple user-facing status indication. The low-power mode is useful in energy-conscious embedded systems. Designers should confirm the target power budget, thermal rise, Ethernet magnetics or fiber implementation, and whether managed features are needed; a simpler unmanaged PHY may be sufficient for less complex products.

🔧

Serial-to-Ethernet Converter

KSZ8863FLLI-TR can be used as the network-switching element in a serial-to-Ethernet converter that needs more than one Ethernet port. A host processor may connect through SPI or I2C, while the switch controller handles multiple 10/100 Mbps links and optional fiber connectivity. This arrangement suits legacy serial equipment that must be connected to several network paths or exposed through a management port. Cable diagnostics and programmable LEDs improve installation and serviceability. Before choosing the device, determine whether the converter requires only one copper port, whether redundancy or managed traffic prioritization is necessary, and whether the added PHY integration is justified compared with using a single Ethernet interface IC.

⚡

Compact Network Power Supply Controller

The KSZ8863FLLI-TR can be integrated into a network power product that requires an Ethernet management connection alongside other monitoring or control functions. Its managed three-port architecture offers flexibility for equipment, uplink, and service connections, while programmable LED indication can communicate operating status without a complex display. Low-power mode can be useful in fanless systems where continuous full-power operation is unnecessary. The component does not directly regulate power, so the application requires a separate power-control and monitoring architecture. Designers should keep Ethernet signal paths away from switching nodes and high-current inductors, observe grounding and decoupling recommendations, and verify the complete enclosure temperature against the -40°C to +85°C device range.

What is the KSZ8863FLLI-TR?
The KSZ8863FLLI-TR is a Microchip Technology 3-port 10/100 managed Ethernet switch controller with integrated PHYs and fiber support. According to the Microchip product page, it is intended for cost-sensitive, power-efficient, low-port-count 10/100 Mbps switching systems. The device is packaged in a 48-LQFP 7x7 mm package and exposes I2C and SPI control interfaces for host configuration and management.
What Ethernet data rates does the KSZ8863FLLI-TR support?
The KSZ8863FLLI-TR supports 10 Mbps and 100 Mbps Ethernet operation. The Microchip KSZ8863 family is described as a three-port 10/100 managed Ethernet switch with integrated PHYs, allowing a compact system to combine copper Ethernet connectivity with fiber support. Its managed-switch architecture is suitable for equipment requiring more than a basic standalone PHY while keeping the port count low.
Where can I download the KSZ8863FLLI-TR datasheet PDF?
The KSZ8863FLLI-TR datasheet is available through the Microchip KSZ8863 product page at https://www.microchip.com/en-us/product/KSZ8863. Search the product documentation area for the KSZ8863 datasheet and related user documentation. The product page is the appropriate starting point because the KSZ8863FLLI-TR is one suffix option within the broader KSZ8863 family.
Where can I find the KSZ8863FLLI-TR pinout?
Use the KSZ8863 family datasheet and its pin-description table to identify all 48-LQFP connections. The KSZ8863FLLI-TR has 48 pins in a 7x7 mm LQFP package, but the individual pin names and alternate functions are not reproduced in this product listing. The pin table is required for assigning management signals, PHY interfaces, LEDs, clocks, supplies, and media-facing connections on the PCB.
Can the KSZ8863FLLI-TR be used for fiber-capable industrial Ethernet equipment?
Yes, the KSZ8863FLLI-TR is a suitable candidate for fiber-capable industrial Ethernet equipment when the board design uses the supported media interface and its -40°C to +85°C operating range. The Microchip product description identifies fiber support, cable diagnostics, programmable LED indication, and low-power operation. Final suitability still depends on the selected PHY configuration, external magnetics or fiber components, and system-level EMC validation.
What are the key specifications of KSZ8863FLLI-TR that engineers should know?
The key KSZ8863FLLI-TR specifications are a three-port managed architecture, 10 Mbps and 100 Mbps operation, integrated PHYs, fiber support, I2C and SPI management, and a 48-LQFP 7x7 mm package. The device also supports cable diagnostics, programmable LED indication, and low-power mode. Its specified operating temperature range is -40°C to +85°C, making it appropriate for industrial embedded networking designs.
Where to buy KSZ8863FLLI-TR online?
Use the Request a Quote form on this page to request KSZ8863FLLI-TR sourcing, current commercial terms, and availability for the exact 48-LQFP orderable MPN. The Microchip product page and manufacturer direct page are the appropriate references for product identity and ordering options. Because commercial terms can change, use the quote form rather than relying on a static price or an unverified stock figure.
What is the price of KSZ8863FLLI-TR?
The current commercial price for KSZ8863FLLI-TR should be requested through the Request a Quote form on this page. The product is listed by Microchip Technology and is offered through manufacturer and distributor channels, but the retrieved listing information does not provide a complete quantity-break table for this exact MPN. The quote request can confirm current unit pricing, lot quantity, and available order configurations.
What is the lead time for KSZ8863FLLI-TR?
The current lead time for KSZ8863FLLI-TR should be confirmed through the Request a Quote form on this page. The manufacturer direct listing indicates that inventory and factory lead-time information can change over time, so a specific delivery date should be tied to the requested quantity and purchase order. The exact current lead time cannot be established from the product identity and package information alone.
Is KSZ8863FLLI-TR in stock?
Stock status for KSZ8863FLLI-TR is best confirmed through the Request a Quote form on this page using the exact MPN KSZ8863FLLI-TR. The manufacturer direct listing reports in-stock units in one result, while distributor availability can vary by region, quantity, and inventory channel. Treat the form response as the current confirmation before committing the BOM or releasing a production order.
What is the difference between KSZ8863FLLI-TR and KSZ8863MLLI?
The KSZ8863FLLI-TR and KSZ8863MLLI are closely related Microchip KSZ8863-family 3-port 10/100 managed Ethernet switch options, but the FLL and MLL suffixes distinguish orderable device variants. The verified family information identifies both as members of the KSZ8863MLL/FLL/RLL group with integrated PHYs and fiber support. Verify the exact pin functions, media configuration, and datasheet tables before treating one as a replacement for the other.
What is the difference between KSZ8863FLLI-TR and KSZ8863RLL?
The KSZ8863FLLI-TR and KSZ8863RLL belong to the same Microchip KSZ8863 family of 3-port 10/100 managed Ethernet switch controllers with integrated PHYs and fiber support. The distinguishing RLL and FLL suffix details are not fully reproduced in the retrieved product information, so the exact variant-specific functions should be confirmed in the manufacturer documentation. For a PCB replacement, compare pin functions, register behavior, media support, and package drawing.
When should I choose KSZ8863FLLI-TR over KSZ8863MLLI?
Choose KSZ8863FLLI-TR when the design specifically calls for the FLL orderable variant and its documented configuration matches the required fiber, copper, LED, and management behavior. Choose KSZ8863MLLI when the MLL variant provides the required interface arrangement for the target design. Because both are members of the same managed-switch family, the decision should be based on the exact suffix-specific datasheet and pin tables rather than the generic Ethernet feature set alone.
Is KSZ8863FLLI-TR suitable for an industrial Ethernet gateway?
The KSZ8863FLLI-TR is suitable for an industrial Ethernet gateway when the design requires three 10/100 Mbps ports, managed switching, fiber support, and operation from -40°C to +85°C. Its low-power mode, cable diagnostics, and programmable LED indication can simplify compact gateway designs. The final design must still validate power consumption, thermal performance, Ethernet magnetics, isolation requirements, and EMC compliance.
What can replace KSZ8863FLLI-TR?
The closest documented replacement candidates are the other Microchip KSZ8863-family variants, including KSZ8863MLLI and KSZ8863RLL, because they share the managed 3-port 10/100 Ethernet switch concept and are identified in the family cross-reference results. No verified cross-brand, same-footprint replacement was identified. Treat family similarity as a shortlist for engineering review, not proof of drop-in equivalence, until pin functions and variant-specific behavior match.
Is KSZ8863FLLI-TR the same as KSZ8863MLLI?
No, the KSZ8863FLLI-TR and KSZ8863MLLI are distinct orderable MPNs within the same KSZ8863 family. Both are associated with the 3-port 10/100 managed Ethernet switch family, but suffix-specific differences can affect ordering configuration, pin functions, or supported features. Use the manufacturer family documentation and exact product suffix tables to establish whether the two devices are functionally interchangeable on a specific PCB.
What is the best Microchip equivalent for KSZ8863FLLI-TR?
The best-supported Microchip alternatives are KSZ8863MLLI and KSZ8863RLL, which are directly identified in the KSZ8863 family comparison material and share the 3-port 10/100 managed-switch positioning. KSZ8851-16MLL is another Microchip Ethernet switch-related candidate, but it is not demonstrated to be pin-compatible with the KSZ8863FLLI-TR in the retrieved information. Verify the exact package, pinout, port count, media interfaces, and register map before selection.

Data referensi engineering untuk KSZ8863FLLI-TR — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose KSZ8863FLLI-TR for a compact three-port 10/100 managed Ethernet design that needs integrated PHYs, fiber support, cable diagnostics, programmable LED indication, low-power mode, and I2C/SPI management. It is particularly appropriate for industrial gateways, factory automation nodes, and access equipment requiring operation from -40°C to +85°C. Consider KSZ8863MLLI or KSZ8863RLL when their suffix-specific configuration better matches the required pin functions or ordering configuration, but verify the manufacturer tables before calling either a drop-in replacement. KSZ8851-16MLL is more relevant when higher port-count family positioning is desired, yet it is not a confirmed functional equivalent for a three-port KSZ8863FLLI-TR board. For a design needing only one or two ports, a simpler Ethernet interface may reduce complexity and cost.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini KSZ8863MLLI KSZ8863RLL KSZ8851-16MLL
Package 48-LQFP (7x7 mm) 48-LQFP (7x7 mm) - family package 48-LQFP (7x7 mm) - family package 48-LQFP (7x7 mm) - verify exact drawing
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Switch Function 3-port managed Ethernet switch KSZ8863 family managed switch KSZ8863 family managed switch 16-port Ethernet switch family positioning

Diferensiator Kunci

  • Integrated three-port managed switching in a compact package (vsKSZ8851-16MLL)
  • Specific low-port-count managed-switch configuration (vsKSZ8863MLLI)
  • Fiber-capable connectivity in the same 48-LQFP footprint class (vsKSZ8863RLL)

Catatan Desain

Follow the manufacturer reference layout for the 48-LQFP device, including input/output decoupling placement and controlled routing for management, clock, and media interfaces. Place the device close to the Ethernet PHY-related circuitry and keep copper structures beneath or around the package from disturbing sensitive signal paths. Confirm land-pattern dimensions and thermal pad requirements against the exact package drawing before fabrication.

Treat Ethernet and fiber-capable connections as high-speed interfaces even though the nominal data rate is 100 Mbps. Use controlled impedance routing where required, minimize discontinuities, provide return paths, and separate communication traces from switching regulators and inductors. Validate the complete board with Ethernet magnetics, connectors, cable lengths, and the intended network environment rather than relying only on schematic-level connectivity.

Use the manufacturer's recommended supply voltage, decoupling capacitors, and power-up sequence for the selected KSZ8863 variant. The supplied product information does not state the supply-voltage range or power consumption, so obtain those values from the family datasheet before sizing the regulator and input capacitance. Check startup current, low-power mode behavior, and the maximum operating temperature against the system power budget.

Do not treat the MLL, FLL, and RLL suffixes as automatically interchangeable. Confirm the exact pin names, alternate functions, media support, LED behavior, and register or configuration differences in the manufacturer documentation for the ordered variant. A family-level compatibility statement is not enough to approve a drop-in replacement; compare the package drawing and complete pin-description tables against the current schematic.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The retrieved comparison material mentions RoHS and REACH status, but no explicit target-device compliance declaration is present in the verified product data. Confirm these attributes using the manufacturer product documentation and the applicable declaration files.

Pencarian Terkait

KSZ8863FLLI-TR datasheet KSZ8863FLLI-TR pinout KSZ8863FLLI-TR datasheet pdf KSZ8863FLLI-TR equivalent KSZ8863FLLI-TR replacement KSZ8863FLLI-TR cross reference KSZ8863FLLI-TR footprint KSZ8863FLLI-TR application circuit KSZ8863FLLI-TR price KSZ8863FLLI-TR stock Microchip KSZ8863FLLI-TR KSZ8863FLLI-TR vs KSZ8863MLLI 48-LQFP managed Ethernet switch 3-port 10/100 Ethernet switch controller

Komponen dan Istilah Terkait

Microchip Technology KSZ8863FLLI-TR KSZ8863MLLI KSZ8863RLL KSZ8851-16MLL KSZ8863 Ethernet switch controller managed Ethernet switch interface IC network controller semiconductor 10/100 Ethernet 10 Mbps 100 Mbps integrated PHY fiber support Base-FX Base-TX I2C SPI cable diagnostics programmable LED indication low-power mode 48-LQFP surface mount
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ