Microchip Technology

KSZ9896CTXI-TR - 6-Port Gigabit Ethernet Switch | Microchip (Tape & Reel)

MPN: KSZ9896CTXI-TR ✓ Aktif
128-pin TQFP with exposed pad, 14 x 14 mm Package
MOQ: 1 |

KSZ9896CTXI-TR Ringkasan

The Microchip Technology KSZ9896CTXI-TR is a managed, fully integrated Layer 2 Ethernet switch with six ports, five integrated 10/100/1000 Mbps Ethernet PHYs, and one configurable MAC interface in a 128-pin TQFP with exposed pad package. The device supports I2C and SPI management interfaces and implements Ethernet switching according to IEEE 802.3.

An Ethernet switch is a network-semiconductor device that receives frames on one port and forwards them to the appropriate destination ports. A managed Layer 2 switch adds configurable port behavior, status monitoring, and traffic control beyond the basic function of an unmanaged switch. The KSZ9896 combines five copper Gigabit Ethernet PHYs with a flexible sixth-port MAC interface, allowing it to serve as the central switching element in industrial, automotive, communications, and embedded Ethernet equipment.

Five of the six ports integrate 10/100/1000 Mbps PHYs, allowing the switch to support gigabit links while retaining 100 Mbps and 10 Mbps compatibility. The sixth port can be configured through GMII, RGMII, MII, or RMII, providing flexibility for connections to another Ethernet controller, FPGA, processor, or network interface. I2C and SPI host interfaces support configuration and status access for embedded systems.

The managed switching architecture operates at Layer 2 and supports the IEEE 802.3 Ethernet functions required by the KSZ9896 family. Integrating five PHYs into the switch reduces the component count of a multi-port network design by eliminating several external PHY devices. The integrated MAC interface provides a configurable path to higher-speed or differently structured network interfaces without requiring a separate switch solely for interface conversion.

Typical uses include industrial Ethernet controllers, automotive in-vehicle networking equipment, industrial gateways, embedded network appliances, and communications equipment with multiple copper ports. The combination of five integrated Gigabit PHYs and one configurable MAC interface is particularly useful when a design requires several local copper links plus a connection to a host processor, FPGA, or additional switching silicon.

PCB implementation requires careful attention to the 128-pin TQFP exposed-pad footprint, high-speed differential routing, and thermal performance. The exposed pad must be connected to the appropriate ground plane with adequate via density, while each Ethernet magnetic interface requires its own carefully terminated network path. Review the manufacturer pin-description table and recommended layout guidance before assigning every power, ground, and signal connection.

This product page combines the manufacturer’s switching capability overview with practical procurement and engineering guidance. It highlights the distinction between the five integrated PHY ports and the configurable sixth MAC port, clarifies interface-selection considerations, and organizes replacement questions around verified package and compatibility requirements rather than treating electrically similar switches as automatic substitutes.

Alternatif penggantian untuk KSZ9896CTXI-TR — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian KSZ9896CTXI-TR (sama faktor bentuk dan footprint) — berbeda di dalam Package, Integrated PHY Data Rates, Product Type, RoHS Status.

Microchip Technology
Package: 128-TQFP-EP, 14 x 14 mm
Integrated PHY Data Rates: 10/100/1000 Mbps per PHY
Product Type: Managed Layer 2 Gigabit Ethernet switch
Bandingkan dengan KSZ9896CTXI-TR →
Microchip Technology
Package: 128-TQFP-EP (14x14 mm) with exposed pad
Product Type: Layer-2 Managed Gigabit Ethernet Switch
RoHS Status: Compliant
Bandingkan dengan KSZ9896CTXI-TR →

KSZ9896CTXC

✅ Drop-In
Microchip Technology
📦 128-pin TQFP with exposed pad
Managed Layer 2 Gigabit Ethernet switch · 6 ports · 5 ports · 10/100/1000 Mbps per PHY · 1 port · GMII, RGMII, MII, and RMII · IEEE 802.3 · I2C and SPI

Kontak untuk harga

Lihat Datasheet →

KSZ9897RTXI

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
Microchip Technology
📦 128-pin TQFP with exposed pad
Layer-2 Managed Gigabit Ethernet Switch · 7 (5 integrated PHY + 2 configurable host/MAC ports) · 10/100/1000 Mbps · 5 x 10/100/1000BASE-T · SGMII, RGMII, MII, RMII · I2C, SPI · Non-blocking wire-speed

Kontak untuk harga

Lihat Datasheet →

KSZ9896CTXI-TR Rating Maksimal & Karakteristik Listrik

Device Type Managed Layer 2 Ethernet switch
Total Port Count 6 ports
Integrated Gigabit Ethernet PHY Ports 5 ports
Configurable MAC Port Count 1 port
Integrated PHY Data Rates 10/100/1000 Mbps per port
Configurable MAC Interface GMII/RGMII/MII/RMII
Management Interfaces I2C and SPI
Ethernet Standard IEEE 802.3
Network Layer Layer 2
Switch Architecture Fully integrated six-port managed switch
Paket 128-pin TQFP with exposed pad, 14 x 14 mm
Tipe Mounting Surface mount

KSZ9896CTXI-TR 128-pin tqfp with exposed pad, 14 x 14 mm Diamant Konfigurasi Panduan

Konfigurasi pin untuk KSZ9896CTXI-TR (128-pin tqfp with exposed pad, 14 x 14 mm pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.

Diamant diagram pakai pakai 128-pin tqfp with exposed pad, 14 x 14 mm untuk KSZ9896CTXI-TR

Tidak ada data diatribut pin yang tersedia untuk KSZ9896CTXI-TR.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

KSZ9896CTXI-TR cocok untuk 6 aplikasis: Industrial Ethernet Gateway, Automotive In-Vehicle Networking, Embedded Network Appliance, Industrial Security and Surveillance, FPGA-Based Network Processing, Communication Equipment Backplane.

🏭

Industrial Ethernet Gateway

The KSZ9896CTXI-TR fits industrial gateways that must aggregate several 10/100/1000 Mbps copper links while communicating with a host processor. Five integrated Gigabit PHYs provide direct device connections, and the sixth GMII/RGMII/MII/RMII port can connect to an embedded controller. I2C and SPI management simplify configuration of port parameters and status monitoring. The principal design benefit is fewer external PHY components and shorter network paths, although each Ethernet channel still requires proper magnetics, impedance-controlled routing, isolation, and surge-protection design for the industrial environment.

🚗

Automotive In-Vehicle Networking

The KSZ9896CTXI-TR can support multi-port Ethernet aggregation in an in-vehicle network when its exact temperature grade and automotive qualification satisfy the platform requirements. Five 10/100/1000 Mbps PHYs support connections to vehicle Ethernet nodes, while the configurable sixth MAC interface links the switching fabric to a vehicle-domain controller, FPGA, or communications processor. I2C and SPI permit a host MCU to initialize and monitor the switch. Design work must include ISO 26262-aware fault analysis, transient protection, grounding, and confirmation that the selected ordering code meets the vehicle program’s qualification requirements.

🖥️

Embedded Network Appliance

The KSZ9896CTXI-TR is suitable for embedded appliances that expose several Ethernet ports to cameras, storage systems, or service equipment. Five integrated Gigabit PHYs reduce board area compared with five independent PHY implementations, and the sixth configurable MAC port connects to the appliance’s main processor through RGMII, RMII, MII, or GMII as required. Layer 2 management through I2C or SPI gives the embedded software a path to configure ports and read status. The design must preserve the manufacturer’s differential-pair geometry and provide isolated magnetics or appropriately designed common-mode filtering at every external copper interface.

🎥

Industrial Security and Surveillance

The KSZ9896CTXI-TR supports network consolidation in surveillance systems that combine multiple camera or access-control nodes with a central recording platform. The five integrated Gigabit PHYs can serve local 10/100/1000 Mbps endpoints, while the sixth MAC interface connects to an NVR, edge processor, or FPGA-based imaging subsystem. The managed Layer 2 architecture and I2C/SPI control path permit firmware-driven port configuration and monitoring. Industrial installations should add surge and overvoltage protection at cable entry points, maintain isolated network domains where required, and validate frame-forwarding behavior under sustained multiport traffic.

🧩

FPGA-Based Network Processing

The KSZ9896CTXI-TR can complement FPGA-based packet-processing systems that require several physical Ethernet ports alongside programmable logic. Five integrated PHYs accept copper links directly, and the configurable sixth port can use GMII or RGMII for a wide parallel interface to the FPGA. I2C and SPI simplify software or hardware initialization. This arrangement allows the FPGA to handle filtering, protocol processing, or traffic aggregation without requiring a separate physical switch. Interface timing, clock domains, reference clocks, and the number of available transceiver resources must be checked carefully because the switch and FPGA must be initialized in a defined order.

🌐

Communication Equipment Backplane

The KSZ9896CTXI-TR fits communication equipment that combines multiple access ports with an uplink or fabric connection. The five integrated Gigabit Ethernet PHYs can connect access devices, while GMII, RGMII, MII, or RMII on the sixth port supports a host controller or another switching block. Managed Layer 2 operation helps implement port-aware traffic handling through the I2C or SPI management interface. Equipment designers should budget for electromagnetic-compatibility margins, chassis grounding, cable surge events, and thermal testing with all six ports active, since sustained traffic can increase switching and I/O power dissipation.

What is the Microchip KSZ9896CTXI-TR?
The Microchip Technology KSZ9896CTXI-TR is a managed, fully integrated Layer 2 Ethernet switch with six ports, five integrated 10/100/1000 Mbps PHYs, and one configurable MAC interface. According to the Microchip KSZ9896 product page, the sixth port can use GMII, RGMII, MII, or RMII, while the device is packaged in a 128-pin TQFP with exposed pad measuring 14 x 14 mm.
How many Ethernet ports does the KSZ9896CTXI-TR have?
The KSZ9896CTXI-TR has six ports in total. Five ports integrate Gigabit Ethernet PHYs operating at 10, 100, or 1000 Mbps, while the remaining port is a configurable MAC interface. According to the Microchip KSZ9896 product overview, this split allows five direct copper-network connections plus a programmable connection to a processor, FPGA, or other Ethernet MAC.
What interfaces can the sixth KSZ9896CTXI-TR port use?
The sixth port can be configured as GMII, RGMII, MII, or RMII. According to the Microchip KSZ9896 product overview, this flexible interface is useful when the switch must connect to a host processor, FPGA, or separate Ethernet controller using the most appropriate data-width and clocking arrangement for that design.
Where can I download the KSZ9896CTXI-TR datasheet PDF?
The official KSZ9896 documentation is available through the Microchip KSZ9896 product page at https://www.microchip.com/en-us/product/KSZ9896. Use the manufacturer’s data sheet and errata documents for the authoritative pin assignments, electrical limits, timing information, initialization sequence, and layout recommendations. The manufacturer also warns that an errata sheet may describe operational differences and recommended workarounds for current devices.
Where can I find the KSZ9896CTXI-TR pinout?
The KSZ9896CTXI-TR pinout is documented in the manufacturer’s KSZ9896 data sheet, beginning with the pin-description table and package drawing. Because this 128-pin TQFP exposed-pad package contains numerous supply, ground, management, PHY, and MAC-interface connections, use the package drawing to cross-check every PCB net before fabrication.
What are the key specifications of KSZ9896CTXI-TR that engineers should know?
The KSZ9896CTXI-TR combines six switch ports, five integrated 10/100/1000 Mbps Ethernet PHYs, one configurable GMII/RGMII/MII/RMII MAC port, IEEE 802.3 operation, and I2C/SPI management in a 128-pin TQFP exposed-pad package. According to the Microchip KSZ9896 product page, the device is a managed Layer 2 switch intended for systems needing integrated Gigabit copper interfaces.
Can the KSZ9896CTXI-TR replace a discrete multi-port Ethernet design?
The KSZ9896CTXI-TR can replace several discrete switch and PHY building blocks when the design uses its five integrated Gigabit PHYs and compatible management architecture. It also provides one configurable MAC port for connection to a host processor or FPGA. The replacement still requires review of pin assignments, clocking, management firmware, power rails, and Ethernet physical-layer implementation.
What can replace the KSZ9896CTXI-TR?
A true drop-in replacement should use the same 128-pin TQFP exposed-pad footprint, provide five integrated Gigabit PHYs, and retain a compatible sixth-port MAC interface plus management functions. The KSZ9896CTXC is the closest identified same-family alternative, but engineers must verify its temperature grade, ordering code, and electrical limits against the manufacturer’s data sheet before replacing the target.
Is the KSZ9896CTXI-TR the same as the KSZ9896CTXC?
The KSZ9896CTXI-TR and KSZ9896CTXC belong to the same KSZ9896 family and appear in a direct comparison, but they are not automatically identical ordering codes. The C suffix generally identifies package-related ordering information while the final suffix identifies the temperature grade, so confirm the exact grade, production status, pinout, and electrical limits before treating the CTXC as a drop-in replacement.
KSZ9896CTXI-TR vs KSZ9897STXI: which is better for an embedded switch design?
Choose the KSZ9896CTXI-TR when its five integrated 10/100/1000 Mbps PHYs and configurable sixth MAC port satisfy the required Layer 2 topology. Choose the KSZ9897STXI only after confirming that its port count, PHY arrangement, MAC interface, management interface, package, and electrical limits match the design. The two devices should not be treated as interchangeable solely because both are managed Ethernet switches.
When should I choose the KSZ9896CTXI-TR over another six-port Ethernet switch?
Choose the KSZ9896CTXI-TR when a design needs five direct Gigabit Ethernet copper ports and a sixth port that can adapt through GMII, RGMII, MII, or RMII. Its I2C and SPI management paths suit embedded host control. If a replacement offers fewer integrated PHYs, a different sixth-port architecture, or another package, it may require schematic and PCB-layout changes.
Is the KSZ9896CTXI-TR suitable for industrial and automotive Ethernet products?
The KSZ9896CTXI-TR is suitable when the system architecture requires five integrated Gigabit PHYs, one configurable MAC interface, and managed Layer 2 switching. Its suitability for a specific industrial or automotive product depends on the required temperature grade, automotive qualification, reliability expectations, and environmental certification. Confirm those requirements against the exact ordering code and manufacturer documentation.
How do you design the PCB around the KSZ9896CTXI-TR?
Follow the manufacturer’s recommended layout and the pin-description table for the 128-pin TQFP exposed-pad package. Provide a continuous ground reference beneath the device, stitch the exposed pad to ground with an appropriate via array, place decoupling capacitors close to their assigned pins, and route Ethernet differential pairs as controlled-impedance transmission lines. Avoid substitutions for supply and ground pins based solely on package position.
How much thermal design is required for the KSZ9896CTXI-TR?
Thermal requirements depend on the selected core voltage, total switch activity, ambient temperature, PCB copper area, and exposed-pad construction. The exposed pad must be connected to the ground plane with substantial thermal via density to distribute heat into the board. Use the manufacturer’s electrical and thermal data to calculate worst-case dissipation for the complete six-port operating profile.
Where can I buy KSZ9896CTXI-TR and request a current quote?
Use the Request a Quote form on this page to request the current KSZ9896CTXI-TR price, stock position, minimum order quantity, and production lead time. The manufacturer’s direct product page also provides ordering information, while its listing notes partial-tray and full-tray inventory. Current commercial terms should always be confirmed through the quote form.
What is the lead time for KSZ9896CTXI-TR?
The current lead time depends on inventory, production scheduling, order quantity, and packaging requirements. Request a quote through the Request a Quote form on this page to confirm the latest allocation, estimated ship date, minimum order quantity, and whether partial trays can be supplied. Do not base a production schedule on an unconfirmed historical availability date.

Data referensi engineering untuk KSZ9896CTXI-TR — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the KSZ9896CTXI-TR when a system needs a managed Layer 2 switch with five integrated 10/100/1000 Mbps copper PHYs and a sixth port that can operate as GMII, RGMII, MII, or RMII. It is especially suitable for industrial gateways, embedded network appliances, communications equipment, and FPGA-based systems that need I2C or SPI control. The KSZ9896CTXC is the closest same-family ordering-code alternative when its different temperature-grade suffix matches the operating environment. Consider the KSZ9897RTXI only when its port architecture, management interface, electrical limits, and initialization requirements have been confirmed to match the existing PCB. A same-package appearance does not establish electrical or functional interchangeability. For any substitution, review the complete pin-description table, strap options, clocking requirements, supply sequencing, PHY support, and manufacturer errata before releasing a new PCB.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini KSZ9896CTXC KSZ9897RTXI
Package 128-pin TQFP with exposed pad, 14 x 14 mm 128-pin TQFP with exposed pad 128-pin TQFP with exposed pad
Brand Microchip Technology Microchip Technology Microchip Technology
Temperature Grade I-grade ordering suffix C-grade ordering suffix R-grade ordering suffix
Ordering Code Status KSZ9896CTXI-TR KSZ9896CTXC KSZ9897RTXI

Diferensiator Kunci

  • Five integrated Gigabit PHYs in one switch device (vsKSZ9896CTXC)
  • Configurable sixth-port MAC interface (vsKSZ9897RTXI)
  • Embedded configuration through two serial interfaces (vsKSZ9896CTXC)

Catatan Desain

Use the manufacturer’s recommended-layout section as the controlling reference for the 128-pin TQFP exposed-pad footprint. Connect the exposed pad to the ground plane with a dense via array, provide uninterrupted ground beneath the device, and place bypass capacitors directly at the corresponding supply pins. Route Ethernet differential pairs with matched impedance and controlled spacing, and avoid placing disruptive clocks or switching nodes beneath the high-speed network interfaces.

Treat the fifth integrated PHY and configurable MAC interface as separate high-speed design channels. Follow the manufacturer’s differential-pair length, spacing, isolation, and via-transition guidance, including any prescribed connection through Ethernet magnetics. Verify the sixth-port GMII, RGMII, MII, or RMII configuration against host clocking and signal-direction requirements because each mode changes timing, voltage, and routing constraints.

Estimate total dissipation from the switch core, PHY activity, configured MAC interface, and external supply currents under the worst expected port-loading condition. Compare junction temperature with the manufacturer’s maximum rating, accounting for ambient temperature and PCB thermal resistance. The exposed pad and ground-plane copper are primary heat paths, so thermal-via density and copper continuity should be included in thermal simulation rather than relying only on component placement.

Do not treat similar Ethernet-switch MPNs as drop-in parts without checking every pin and configuration. In particular, verify the ordering suffix, temperature grade, PHY count, sixth-port interface, management pins, clock requirements, strap options, initialization sequence, and exposed-pad connection. Follow the current manufacturer data sheet and errata documents because operational differences and recommended workarounds may apply to production devices.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

Compliance status requires confirmation from the exact ordering code or the manufacturer’s material-declaration documentation.

Pencarian Terkait

microchip ksz9896ctxi-tr KSZ9896CTXI-TR datasheet KSZ9896CTXI-TR datasheet pdf KSZ9896CTXI-TR pinout KSZ9896CTXI-TR 128 TQFP KSZ9896CTXI-TR six port Gigabit switch KSZ9896CTXI-TR replacement KSZ9896CTXI-TR drop-in replacement KSZ9896CTXI-TR vs KSZ9897STXI KSZ9896CTXI-TR equivalent KSZ9896CTXI-TR I2C SPI interface KSZ9896CTXI-TR price KSZ9896CTXI-TR stock KSZ9896CTXI-TR industrial Ethernet switch

Komponen dan Istilah Terkait

Microchip Technology KSZ9896CTXI-TR KSZ9896CTXC KSZ9897RTXI managed Ethernet switch Layer 2 switch network interface controller Ethernet switch Gigabit Ethernet PHY 10/100/1000 Mbps Ethernet GMII RGMII MII RMII I2C SPI IEEE 802.3 128-pin TQFP TQFP exposed-pad package surface-mount package industrial Ethernet automotive Ethernet FPGA network interface embedded network appliance Layer 2 switching
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ