LM224KADG4 - 1.2MHz Quad Op Amp | Texas Instruments
MPN: LM224KADG4 ✓ AktifLM224KADG4 Ringkasan
An operational amplifier is an analog integrated circuit that uses high open-loop gain to amplify the difference between two input voltages. A quad operational amplifier combines four amplifiers in one package, reducing component count and simplifying power distribution in designs that need several independent gain stages. The LM224KADG4 belongs to the general-purpose operational-amplifier family within the broader voltage-regulator and power-management-independent analog IC hierarchy. Its internal frequency compensation removes the need for an external compensation capacitor in typical closed-loop configurations.
The principal features are a 1.2 MHz gain-bandwidth product, four amplifier channels, 14-SOIC packaging, low input bias current of approximately 15 nA, and output-current capability of approximately 30 mA per channel. These characteristics support accurate signal amplification in DC and low-frequency systems, including transducer interfaces, current-loop receivers, analog measurement circuits, and embedded control systems. The wide input common-mode range allows direct sensing near ground, which is important in battery-powered and single-supply equipment.
Internally, the LM224 family uses a differential-input stage, voltage-amplification stage, and output stage optimized for general-purpose analog operation. Internal frequency compensation provides stable operation in common noninverting configurations when the recommended feedback network and gain limits are respected. The 14-pin gull-wing SOIC package is compatible with conventional surface-mount assembly and provides separate connections for each amplifier’s differential inputs, output, and supply pins.
Typical applications include industrial sensor interfaces, temperature measurement, current sensing, process-control instrumentation, data-acquisition systems, audio preamplifier stages, and power-supply feedback loops. The quad organization is particularly useful when a design needs multiple buffered channels, such as four sensor inputs sharing one analog front end.
Designers should maintain adequate input and output voltage headroom, check the common-mode and output-swing limits against the actual supply voltage, and provide stable bypass capacitance close to the supply pins. The 14-SOIC footprint requires adequate copper routing and thermal consideration when several channels operate continuously.
This page summarizes the LM224KADG4’s verified device identity, package and analog specifications, drop-in alternatives, application guidance, and design considerations for engineers evaluating a quad general-purpose op amp.
Alternatif penggantian untuk LM224KADG4 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian LM224KADG4 (sama faktor bentuk dan footprint) — berbeda di dalam Package, Mounting Type, Input Offset Voltage, Product Type, Slew Rate.
LM224DR
✅ Drop-In✓ Ada di Gudang
$0.1641 / Satuan
Lihat Datasheet →LM224ADR
✅ Drop-InKontak untuk harga
Lihat Datasheet →LM224KADR
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
LM224KADRG4
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
LM224ADRE4
✅ Drop-InKontak untuk harga
Lihat Datasheet →LM224KADG4 Rating Maksimal & Karakteristik Listrik
| Amplifier Type | General-purpose operational amplifier |
| Number of Channels | 4 independent channels |
| Gain-Bandwidth Product | 1.2 MHz |
| Slew Rate | 0.5 V/us |
| Input Bias Current | 15 nA typical |
| Input Offset Voltage | 2 mV typical |
| Input Offset Current | 2 nA typical |
| Output Current Capability | 30 mA per channel |
| Arus Pemuat | 0.8 mA typical per amplifier |
| Supply Voltage Range | 3 V to 32 V |
| Common-Mode Input Range | Includes ground |
| Frequency Compensation | Internal |
| Paket | 14-SOIC, 0.154 inch body width, 3.90 mm |
| Tipe Mounting | Surface mount |
| Lead Form | Gull wing |
LM224KADG4 14-soic, 0.154 inch body width, 3.90 mm Diamant Konfigurasi Panduan
Konfigurasi pin untuk LM224KADG4 (14-soic, 0.154 inch body width, 3.90 mm pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.
Tidak ada data diatribut pin yang tersedia untuk LM224KADG4.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
LM224KADG4 cocok untuk 6 aplikasis: Industrial Sensor Conditioning, Data Acquisition Systems, Temperature Measurement, Power-Supply Feedback, Audio Preamplifier Stages, Battery-Powered Portable Instruments.
Industrial Sensor Conditioning
The LM224KADG4 fits four-channel industrial sensor conditioning because it combines four independent amplifiers with approximately 15 nA typical input bias current and a common-mode input range that includes ground. The device can buffer thermocouple, resistive, and low-current sensor outputs while preserving the low-frequency signals used in process monitoring. Its 1.2 MHz gain-bandwidth product is sufficient for sensor networks and diagnostic equipment operating well below megahertz bandwidth. Place supply bypass capacitors near the package and maintain the output within the specified swing range.
Direkomendasikan
Data Acquisition Systems
The LM224KADG4 is useful in data-acquisition systems requiring four analog channels on a compact 14-SOIC footprint. Its four independent amplifiers can provide input buffering, gain stages, active filtering, and output drive without requiring four separate packages. A 1.2 MHz gain-bandwidth product supports low-frequency measurement and control loops, while 0.5 V/us slew rate helps preserve signal fidelity in moderate-bandwidth channels. Designers should check the output-current requirement and ensure that ADC input drive settling is compatible with the selected gain and bandwidth.
Direkomendasikan
Temperature Measurement
The LM224KADG4 can be used in multi-channel temperature-measurement front ends where the input signal is referenced near ground. The common-mode input range including ground is especially useful for resistive sensors and low-level thermocouple-style circuits, while the approximately 15 nA typical input bias current limits loading of high-resistance sensing elements. Four independent channels allow several measurement points to share one package. The amplifier’s 2 mV typical input offset should be included in the overall error budget, and supply bypass should be placed close to the device.
Direkomendasikan
Power-Supply Feedback
The LM224KADG4 is suitable for power-supply feedback and remote-sensing circuits where several amplifier stages must operate from a relatively wide supply range. Its internal frequency compensation supports conventional closed-loop use, and the 3 V to 32 V supply capability allows use in industrial supply designs. The 1.2 MHz gain-bandwidth product is suitable for slow control loops, while the 30 mA per-channel output-current capability provides margin for driving feedback-network nodes. Compensation and stability should be evaluated with the complete power-stage and feedback-network layout.
Direkomendasikan
Audio Preamplifier Stages
The LM224KADG4 can provide multiple general-purpose preamplifier or buffer stages in low-frequency audio and communication equipment. Its 1.2 MHz gain-bandwidth product covers voice-band and control-signal paths, while the four-channel configuration reduces package count when several preamplifier inputs are required. The typical 0.5 V/us slew rate supports moderate signal amplitudes, but applications requiring low-noise high-fidelity audio should assess the LM224 noise characteristics against the system requirement. Output loading and power-supply ripple should also be checked during headroom analysis.
Direkomendasikan
Battery-Powered Portable Instruments
The LM224KADG4 supports low-power portable instrumentation because its supply current is approximately 0.8 mA typical per amplifier and its supply range includes low-voltage single-supply operation. Four channels make it practical to multiplex or buffer several low-frequency inputs while retaining a compact 14-SOIC footprint. The common-mode range including ground simplifies interfaces to grounded resistive and current-sense sensors. A 3 V to 32 V supply range provides flexibility, although battery life depends on the actual output activity, external load, and regulator efficiency.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk LM224KADG4 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | LM224DR | LM224ADR | LM224KADR | LM224KADRG4 | LM224ADRE4 |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 14-SOIC | 14-SOIC - same | 14-SOIC - same | 14-SOIC - same | 14-SOIC - same | 14-SOIC - same |
| Number of Amplifiers | 4 | 4 | 4 | 4 | 4 | 4 |
| Gain-Bandwidth Product | 1.2 MHz | 1.2 MHz | 1.2 MHz | 1.2 MHz | 1.2 MHz | 1.2 MHz |
| Slew Rate | 0.5 V/us | 0.5 V/us | 0.5 V/us | 0.5 V/us | 0.5 V/us | 0.5 V/us |
| Supply Voltage Range | 3 V to 32 V | 3 V to 32 V | 3 V to 32 V | 3 V to 32 V | 3 V to 32 V | 3 V to 32 V |
| Input Offset Voltage | 2 mV typical | 2 mV typical | 2 mV typical | 2 mV typical | 2 mV typical | 2 mV typical |
| Input Bias Current | 15 nA typical | 15 nA typical | 15 nA typical | 15 nA typical | 15 nA typical | 15 nA typical |
| Output Current Capability | 30 mA per channel | 30 mA per channel | 30 mA per channel | 30 mA per channel | 30 mA per channel | 30 mA per channel |
| Compensation | Internal | Internal | Internal | Internal | Internal | Internal |
Diferensiator Kunci
- Four independent general-purpose channels in one 14-SOIC package (vsLM224DR)
- Single-supply operation with common-mode input range including ground (vsLM224ADR)
- Approximately 15 nA typical input bias current (vsLM224KADR)
- Internal frequency compensation (vsLM224KADRG4)
Catatan Desain
Place a low-ESR bypass capacitor close to the supply pins and provide adequate routing for both input and output networks. The LM224KADG4 operates from 3 V to 32 V, but the usable signal range is narrower because the common-mode input range and output swing depend on the actual supply voltage. Confirm these limits against the signal being amplified and keep the output away from the positive and negative rails.
Keep the feedback resistors and non-inverting input connections short and away from high-current switching paths. The four-channel 14-SOIC layout should separate sensitive amplifier inputs from noisy digital or power-converter routing. Maintain a continuous ground path beneath and around the device, and use a quiet ground return for input-referenced signals to reduce offset and noise pickup.
Do not assume that any quad amplifier with a similar package can replace the LM224KADG4. Verify amplifier count, pinout, supply range, common-mode range, output swing, slew rate, bias current, temperature grade, and package suffix. The listed LM224 alternatives share the core family and footprint, but production status and exact ordering configuration still require confirmation before substitution.
Informasi Konformitas
The general-purpose LM224 is not presented as an automotive-qualified AEC-Q100 device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status are not established by the device results and should be confirmed from the manufacturer’s current product documentation.