Texas Instruments

LM224KADG4 - 1.2MHz Quad Op Amp | Texas Instruments

料号: LM224KADG4 ✓ 量产中
2 mV typical Vdss 15 nA typical Id 14-SOIC, 0.154 inch body width, 3.90 mm Package Internal Speed
最小起订量: 1 |

LM224KADG4 概述

The Texas Instruments LM224KADG4 is a general-purpose quad operational amplifier with four independent, internally frequency-compensated amplifiers, a 1.2 MHz gain-bandwidth product, and a 14-SOIC package. It is designed for single-supply operation across industrial instrumentation, sensor conditioning, and low-frequency analog signal-processing systems. The device combines a wide operating-voltage range with low input bias current and output-current capability, making it suitable for applications requiring multiple amplifier channels on one PCB footprint.

An operational amplifier is an analog integrated circuit that uses high open-loop gain to amplify the difference between two input voltages. A quad operational amplifier combines four amplifiers in one package, reducing component count and simplifying power distribution in designs that need several independent gain stages. The LM224KADG4 belongs to the general-purpose operational-amplifier family within the broader voltage-regulator and power-management-independent analog IC hierarchy. Its internal frequency compensation removes the need for an external compensation capacitor in typical closed-loop configurations.

The principal features are a 1.2 MHz gain-bandwidth product, four amplifier channels, 14-SOIC packaging, low input bias current of approximately 15 nA, and output-current capability of approximately 30 mA per channel. These characteristics support accurate signal amplification in DC and low-frequency systems, including transducer interfaces, current-loop receivers, analog measurement circuits, and embedded control systems. The wide input common-mode range allows direct sensing near ground, which is important in battery-powered and single-supply equipment.

Internally, the LM224 family uses a differential-input stage, voltage-amplification stage, and output stage optimized for general-purpose analog operation. Internal frequency compensation provides stable operation in common noninverting configurations when the recommended feedback network and gain limits are respected. The 14-pin gull-wing SOIC package is compatible with conventional surface-mount assembly and provides separate connections for each amplifier’s differential inputs, output, and supply pins.

Typical applications include industrial sensor interfaces, temperature measurement, current sensing, process-control instrumentation, data-acquisition systems, audio preamplifier stages, and power-supply feedback loops. The quad organization is particularly useful when a design needs multiple buffered channels, such as four sensor inputs sharing one analog front end.

Designers should maintain adequate input and output voltage headroom, check the common-mode and output-swing limits against the actual supply voltage, and provide stable bypass capacitance close to the supply pins. The 14-SOIC footprint requires adequate copper routing and thermal consideration when several channels operate continuously.

This page summarizes the LM224KADG4’s verified device identity, package and analog specifications, drop-in alternatives, application guidance, and design considerations for engineers evaluating a quad general-purpose op amp.

直接替换替代料: LM224KADG4 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: LM224KADG4 (相同外形与封装尺寸) ——差异在于 Package, Mounting Type, Input Offset Voltage, Product Type, Slew Rate.

Texas Instruments
Package: 14-pin SOIC
Mounting Type: Surface-mount SOIC
Input Offset Voltage: 3 mV
对比 LM224KADG4 →
Texas Instruments
Package: 14-pin SOIC
Mounting Type: Surface-mount SOIC
Input Offset Voltage: 3 mV
对比 LM224KADG4 →
Texas Instruments
Package: 14-SOIC
Product Type: Standard general-purpose operational amplifier
对比 LM224KADG4 →

LM224DR

✅ 直接替换
Texas Instruments
📦 14-SOIC
Standard general-purpose operational amplifier · 4 circuits · 14-SOIC · Surface mount

✓ 有现货

$0.1641 / 个

查看数据手册 →

LM224ADR

✅ 直接替换
Texas Instruments
📦 14-SOIC
Quad general-purpose operational amplifier · 4 circuits · Four independent high-gain, frequency-compensated amplifiers · 1.2 MHz · 0.5 V/µs · 3 mV · 30 V · ±1.5 V to ±16 V

联系询价

查看数据手册 →

LM224KADR

✅ 直接替换
📦 14-SOIC
Same LM224 family, four amplifier channels, approximately 1.2 MHz bandwidth, and 14-SOIC package; exact suffix configuration differs.

📋 参考替代料(不在目录中)

LM224KADRG4

✅ 直接替换
📦 14-SOIC
Same LM224KAD family and 14-SOIC footprint; ordering and packing suffix differs from LM224KADG4 while core specifications remain aligned.

📋 参考替代料(不在目录中)

LM224ADRE4

✅ 直接替换
Texas Instruments
📦 14-SOIC
4 channels · High gain, internally frequency compensated · 1.2 MHz · 0.5 V/µs · 3 V · 32 V · 2 mV · 2 nA

联系询价

查看数据手册 →

LM224KADG4 最大额定值与电气特性

Amplifier Type General-purpose operational amplifier
Number of Channels 4 independent channels
Gain-Bandwidth Product 1.2 MHz
Slew Rate 0.5 V/us
Input Bias Current 15 nA typical
Input Offset Voltage 2 mV typical
Input Offset Current 2 nA typical
Output Current Capability 30 mA per channel
电源电流 0.8 mA typical per amplifier
Supply Voltage Range 3 V to 32 V
Common-Mode Input Range Includes ground
Frequency Compensation Internal
封装 14-SOIC, 0.154 inch body width, 3.90 mm
安装类型 Surface mount
Lead Form Gull wing

LM224KADG4 14-soic, 0.154 inch body width, 3.90 mm 引脚配置指南

LM224KADG4(14-soic, 0.154 inch body width, 3.90 mm 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

LM224KADG4 的 14-soic, 0.154 inch body width, 3.90 mm 封装引脚图

暂无详细引脚数据: LM224KADG4.

请参阅 数据手册 以查看完整引脚配置。

典型应用

LM224KADG4 适用于 6 应用s: Industrial Sensor Conditioning, Data Acquisition Systems, Temperature Measurement, Power-Supply Feedback, Audio Preamplifier Stages, Battery-Powered Portable Instruments.

🏭

Industrial Sensor Conditioning

The LM224KADG4 fits four-channel industrial sensor conditioning because it combines four independent amplifiers with approximately 15 nA typical input bias current and a common-mode input range that includes ground. The device can buffer thermocouple, resistive, and low-current sensor outputs while preserving the low-frequency signals used in process monitoring. Its 1.2 MHz gain-bandwidth product is sufficient for sensor networks and diagnostic equipment operating well below megahertz bandwidth. Place supply bypass capacitors near the package and maintain the output within the specified swing range.

🖥️

Data Acquisition Systems

The LM224KADG4 is useful in data-acquisition systems requiring four analog channels on a compact 14-SOIC footprint. Its four independent amplifiers can provide input buffering, gain stages, active filtering, and output drive without requiring four separate packages. A 1.2 MHz gain-bandwidth product supports low-frequency measurement and control loops, while 0.5 V/us slew rate helps preserve signal fidelity in moderate-bandwidth channels. Designers should check the output-current requirement and ensure that ADC input drive settling is compatible with the selected gain and bandwidth.

🌡️

Temperature Measurement

The LM224KADG4 can be used in multi-channel temperature-measurement front ends where the input signal is referenced near ground. The common-mode input range including ground is especially useful for resistive sensors and low-level thermocouple-style circuits, while the approximately 15 nA typical input bias current limits loading of high-resistance sensing elements. Four independent channels allow several measurement points to share one package. The amplifier’s 2 mV typical input offset should be included in the overall error budget, and supply bypass should be placed close to the device.

⚡

Power-Supply Feedback

The LM224KADG4 is suitable for power-supply feedback and remote-sensing circuits where several amplifier stages must operate from a relatively wide supply range. Its internal frequency compensation supports conventional closed-loop use, and the 3 V to 32 V supply capability allows use in industrial supply designs. The 1.2 MHz gain-bandwidth product is suitable for slow control loops, while the 30 mA per-channel output-current capability provides margin for driving feedback-network nodes. Compensation and stability should be evaluated with the complete power-stage and feedback-network layout.

🎧

Audio Preamplifier Stages

The LM224KADG4 can provide multiple general-purpose preamplifier or buffer stages in low-frequency audio and communication equipment. Its 1.2 MHz gain-bandwidth product covers voice-band and control-signal paths, while the four-channel configuration reduces package count when several preamplifier inputs are required. The typical 0.5 V/us slew rate supports moderate signal amplitudes, but applications requiring low-noise high-fidelity audio should assess the LM224 noise characteristics against the system requirement. Output loading and power-supply ripple should also be checked during headroom analysis.

📱

Battery-Powered Portable Instruments

The LM224KADG4 supports low-power portable instrumentation because its supply current is approximately 0.8 mA typical per amplifier and its supply range includes low-voltage single-supply operation. Four channels make it practical to multiplex or buffer several low-frequency inputs while retaining a compact 14-SOIC footprint. The common-mode range including ground simplifies interfaces to grounded resistive and current-sense sensors. A 3 V to 32 V supply range provides flexibility, although battery life depends on the actual output activity, external load, and regulator efficiency.

What is the operating voltage of LM224KADG4?
The LM224KADG4 operates from 3 V to 32 V, allowing operation from single-supply systems or split-supply rails. According to the LM224 family information, the device is a general-purpose quad operational amplifier with four internally compensated channels. The supply range must also accommodate the signal’s input and output swing, not just the nominal supply voltage.
What is the gain-bandwidth product of LM224KADG4?
The LM224KADG4 has a gain-bandwidth product of 1.2 MHz. This specification determines the useful frequency range at different closed-loop gains and is suitable for low-frequency instrumentation and sensor-conditioning circuits. The same device specification identifies a slew rate of 0.5 V/us, which should be checked when driving larger capacitive or dynamic loads.
How many amplifiers are in the LM224KADG4?
The LM224KADG4 contains four independent, internally frequency-compensated operational amplifiers in one package. Each channel has its own inverting and non-inverting inputs and output, while the amplifiers share the package power rails. This arrangement is useful for multi-sensor acquisition, multiple buffer stages, and four-channel analog front ends.
Where can I download the LM224KADG4 datasheet PDF?
The LM224KADG4 datasheet PDF is available through the Texas Instruments part documentation and the listed manufacturer-linked datasheet result. Use the manufacturer datasheet for the complete electrical characteristics, pin description, recommended operating conditions, and application guidance. The target device is identified as a 14-SOIC general-purpose quad amplifier.
Where can I find the LM224KADG4 pinout?
The LM224KADG4 pinout is defined in the manufacturer datasheet’s pin-configuration and pin-description sections. The device uses a 14-SOIC package with gull-wing leads and four independent amplifier channels. Use the datasheet pin table when assigning power, input, output, and no-connect functions rather than relying on a generic quad-op-amp diagram.
Can LM224KADG4 operate from a single 5 V supply?
Yes, the LM224KADG4 is compatible with single-supply operation because its operating range begins at 3 V and its common-mode input range includes ground. A 5 V supply is therefore suitable for many single-supply signal-conditioning designs, provided the output remains inside the specified output-swing range. Bypass capacitors should be placed close to the supply pins.
Is LM224KADG4 suitable for sensor-conditioning applications?
The LM224KADG4 is well suited to general sensor conditioning because it provides four channels, approximately 15 nA typical input bias current, and a common-mode range that includes ground. These features help preserve weak sensor signals and support current sensing, temperature measurement, and grounded sensor inputs. Input bias, offset, noise, and supply rejection still need to be evaluated against the sensor’s impedance and accuracy target.
What is the difference between LM224KADG4 and LM224DR?
The LM224KADG4 is the 14-SOIC ordering variant associated with the listed LM224 family, while LM224DR is another ordering code shown in a comparison result. The verified comparison identifies the same 1.2 MHz quad general-purpose amplifier class and 14-SOIC format. Confirm the exact suffix, temperature grade, and production status against the manufacturer’s ordering table before substitution.
What is the difference between LM224KADG4 and LM224KADRG4?
LM224KADG4 and LM224KADRG4 are closely related 14-SOIC LM224 ordering variants. The comparison result states that the LM224ADRE4 alternative has consistent performance, terminals, and package characteristics. In practice, engineers should verify the exact reel or packing suffix, temperature rating, and lifecycle status; the suffix can affect packaging logistics without changing the core amplifier function.
What is the best drop-in replacement for LM224KADG4?
The strongest drop-in choice is an LM224-family 14-SOIC variant with matching four-channel architecture, approximately 1.2 MHz bandwidth, and compatible supply and signal conditions. LM224DR, LM224ADR, LM224KADR, LM224KADRG4, and LM224ADRE4 are the closest listed candidates. Before replacement, verify pin functions, common-mode limits, output swing, temperature grade, and lifecycle requirements.
When should I choose LM224KADG4 over a precision op amp?
Choose the LM224KADG4 when four low-frequency, general-purpose channels are more valuable than very low offset or low-noise specifications. It offers a 1.2 MHz gain-bandwidth product, approximately 2 mV typical input offset, and internal frequency compensation. For high-resolution sensor measurement or audio paths requiring lower noise, a precision or low-noise amplifier may be a better architectural choice.
What is the best Analog Devices equivalent for LM224KADG4?
An Analog Devices equivalent must be selected from a verified 14-pin, four-channel, pin-compatible quad general-purpose amplifier with comparable supply voltage, gain-bandwidth, slew rate, and input/output ranges. The cross-reference results identify Analog Devices as a replacement manufacturer, but they do not expose a complete manufacturer part number in the supplied excerpt. Use the manufacturer’s cross-reference tool to confirm the exact device before placing an order.
How much current does LM224KADG4 consume?
The LM224KADG4 has a typical low supply-current drain of approximately 0.8 mA per amplifier, or about 3.2 mA for four active channels under the stated typical condition. Actual consumption depends on supply voltage, output activity, input common-mode voltage, and load. This makes the device suitable for low-power instrumentation while still requiring normal supply decoupling.
Where can I buy LM224KADG4 online?
Use the Request a Quote form on this page to request current availability, commercial terms, and lead time for LM224KADG4. The component is a standard 14-SOIC quad operational amplifier, and the manufacturer documentation confirms its device identity. Current sourcing status should be confirmed through the quote process rather than inferred from a static product listing.
What is the price of LM224KADG4?
Use the Request a Quote form on this page for the current price of LM224KADG4 and the applicable quantity breaks. The component is listed as a Texas Instruments 14-SOIC quad general-purpose operational amplifier, and commercial terms may change with volume, packaging, and market conditions. This page does not present a static price as a guaranteed quotation.
What is the lead time for LM224KADG4?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. Lead time can change with manufacturer inventory, order volume, and shipment destination, so an archived stock statement is not a reliable promise for a new order. The exact MPN LM224KADG4 identifies the Texas Instruments 14-SOIC ordering configuration.
What are the key specifications of LM224KADG4 that engineers should know?
The LM224KADG4 is a four-channel, internally compensated general-purpose op amp with a 1.2 MHz gain-bandwidth product, 0.5 V/us slew rate, approximately 15 nA typical input bias current, 2 mV typical input offset, and approximately 30 mA output-current capability per channel. It operates from 3 V to 32 V, uses a 14-SOIC package, and supports common-mode inputs that include ground.

工程参考数据: LM224KADG4 ——对比、设计指导和合规信息。

选型指南

Choose LM224KADG4 when a compact 14-SOIC solution must provide four general-purpose, internally compensated amplifier channels for low-frequency instrumentation or signal conditioning. It is particularly suitable for grounded sensor inputs because its common-mode range includes ground, and its 3 V to 32 V supply range supports both compact and industrial rails. LM224DR, LM224ADR, and LM224KADR are appropriate alternatives when the same core LM224 electrical performance and footprint are required but the ordering configuration differs. LM224KADRG4 is useful when a closely related ordering code is available, while LM224ADRE4 should be selected only after confirming its exact grade and suffix. For high-resolution measurement, very low offset, or low-noise audio, choose a precision or low-noise amplifier instead. Verify output swing, load current, temperature grade, lifecycle status, and manufacturer ordering information before approving any substitution.

与替代料对比

参数 本产品 LM224DR LM224ADR LM224KADR LM224KADRG4 LM224ADRE4
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 14-SOIC 14-SOIC - same 14-SOIC - same 14-SOIC - same 14-SOIC - same 14-SOIC - same
Number of Amplifiers 4 4 4 4 4 4
Gain-Bandwidth Product 1.2 MHz 1.2 MHz 1.2 MHz 1.2 MHz 1.2 MHz 1.2 MHz
Slew Rate 0.5 V/us 0.5 V/us 0.5 V/us 0.5 V/us 0.5 V/us 0.5 V/us
Supply Voltage Range 3 V to 32 V 3 V to 32 V 3 V to 32 V 3 V to 32 V 3 V to 32 V 3 V to 32 V
Input Offset Voltage 2 mV typical 2 mV typical 2 mV typical 2 mV typical 2 mV typical 2 mV typical
Input Bias Current 15 nA typical 15 nA typical 15 nA typical 15 nA typical 15 nA typical 15 nA typical
Output Current Capability 30 mA per channel 30 mA per channel 30 mA per channel 30 mA per channel 30 mA per channel 30 mA per channel
Compensation Internal Internal Internal Internal Internal Internal

关键差异点

  • Four independent general-purpose channels in one 14-SOIC package (对比 LM224DR)
  • Single-supply operation with common-mode input range including ground (对比 LM224ADR)
  • Approximately 15 nA typical input bias current (对比 LM224KADR)
  • Internal frequency compensation (对比 LM224KADRG4)

设计说明

Place a low-ESR bypass capacitor close to the supply pins and provide adequate routing for both input and output networks. The LM224KADG4 operates from 3 V to 32 V, but the usable signal range is narrower because the common-mode input range and output swing depend on the actual supply voltage. Confirm these limits against the signal being amplified and keep the output away from the positive and negative rails.

Keep the feedback resistors and non-inverting input connections short and away from high-current switching paths. The four-channel 14-SOIC layout should separate sensitive amplifier inputs from noisy digital or power-converter routing. Maintain a continuous ground path beneath and around the device, and use a quiet ground return for input-referenced signals to reduce offset and noise pickup.

Do not assume that any quad amplifier with a similar package can replace the LM224KADG4. Verify amplifier count, pinout, supply range, common-mode range, output swing, slew rate, bias current, temperature grade, and package suffix. The listed LM224 alternatives share the core family and footprint, but production status and exact ordering configuration still require confirmation before substitution.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The general-purpose LM224 is not presented as an automotive-qualified AEC-Q100 device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status are not established by the device results and should be confirmed from the manufacturer’s current product documentation.

相关搜索

LM224KADG4 datasheet LM224KADG4 pinout LM224KADG4 datasheet pdf LM224KADG4 equivalent LM224KADG4 replacement LM224KADG4 cross reference LM224KADG4 price LM224KADG4 stock Texas Instruments LM224KADG4 LM224KADG4 vs LM224DR LM224 14-SOIC pinout LM224KADG4 sensor conditioning

相关元器件 & 术语

Texas Instruments LM224KADG4 LM224DR LM224ADR LM224KADR LM224KADRG4 LM224ADRE4 quad operational amplifier operational amplifier analog integrated circuit general-purpose amplifier single-supply operation internally frequency-compensated amplifier 1.2 MHz gain-bandwidth product 0.5 V/us slew rate 15 nA input bias current 2 mV input offset voltage 30 mA output current 3 V to 32 V supply voltage common-mode input voltage 14-SOIC SOIC package family surface-mount package industrial sensor conditioning data acquisition system
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情