LM224KDE4 - Quad 30V 1.2MHz Op Amp | Texas Instruments
MPN: LM224KDE4 ✓ AktifLM224KDE4 Ringkasan
An operational amplifier is an analog signal-conditioning integrated circuit that compares two input voltages and amplifies the difference between them. Its broader hierarchy is operational amplifier -> voltage-amplifier IC -> analog amplifier -> amplifier IC -> semiconductor. The LM224K combines four general-purpose amplifiers in one package, allowing a compact circuit to perform buffering, amplification, filtering, level shifting, and feedback-control functions.
The principal features of the LM224KDE4 include four independent amplifier channels, operation from a single or split supply, a 30 V maximum supply rating, and a 1.2 MHz gain-bandwidth product. The improved 2 kV ESD protection helps the device tolerate electrostatic discharge exposure, while the -25°C to +85°C operating range supports industrial and extended-temperature applications.
Each channel uses a differential input stage, high-gain voltage-amplification stage, and output stage optimized for general-purpose analog signal paths. Because the four amplifiers share a common supply architecture but operate independently, engineers can use them for simultaneous sensing, buffering, error amplification, or active filtering when sufficient decoupling is provided.
Typical uses include industrial sensor interfaces, low-frequency active filters, transducer conditioning, control-loop error amplifiers, and general instrumentation. The 14-pin SOIC is also convenient for prototypes and repair assemblies because its four amplifiers can replace separate single or dual amplifier packages when board area is limited.
For reliable operation, place the supply bypass capacitor close to the positive and ground pins and route high-current return paths away from sensitive input nodes. Check output swing, input common-mode range, load capability, and stability against the required signal amplitude before closing the feedback loop.
This page combines manufacturer specifications, lifecycle information, package guidance, structured comparisons, and practical replacement guidance to support component selection, PCB layout, sourcing, and second-source qualification.
Alternatif penggantian untuk LM224KDE4 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian LM224KDE4 (sama faktor bentuk dan footprint) — berbeda di dalam Package, Mounting Type, Architecture, Operating Temperature Range, Product Type.
LM224KADR
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
LM224ADR
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →LM224DR
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan✓ Ada di Gudang
$0.1641 / Satuan
Lihat Datasheet →LM224DG4
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →LM224KDR
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →LM224KDE4 Rating Maksimal & Karakteristik Listrik
| Amplifier Type | General-purpose operational amplifier |
| Number of Channels | 4 channels |
| Architecture | Quadruple, four independent amplifiers |
| Maximum Supply Voltage | 30 V |
| Gain-Bandwidth Product | 1.2 MHz |
| ESD Protection | 2 kV |
| Rentang Suhu Kerja | -25°C to +85°C |
| Paket | 14-SOIC (0.154 inch, 3.90 mm width) |
| Jumlah Pin | 14 pins |
| Tipe Mounting | Surface mount |
| Terminal Form | Gull wing |
| Package Shape | Rectangular |
| Supply Configuration | Single or split supply |
Konfigurasi Pin LM224KDE4
| Pin produk 1 | OUT1 — Amplifier 1 output |
| Pin produk 2 | IN1- — Amplifier 1 inverting input |
| Pin produk 3 | IN1+ — Amplifier 1 non-inverting input |
| Pin produk 4 | V- — Negative supply connection |
| Pin produk 5 | IN2+ — Amplifier 2 non-inverting input |
| Pin produk 6 | IN2- — Amplifier 2 inverting input |
| Pin produk 7 | OUT2 — Amplifier 2 output |
| Pin produk 8 | OUT3 — Amplifier 3 output |
| Pin produk 9 | IN3- — Amplifier 3 inverting input |
| Pin produk 10 | IN3+ — Amplifier 3 non-inverting input |
| Pin produk 11 | V+ — Positive supply connection |
| Pin produk 12 | IN4+ — Amplifier 4 non-inverting input |
| Pin produk 13 | IN4- — Amplifier 4 inverting input |
| Pin produk 14 | OUT4 — Amplifier 4 output |
Aplikasi Umum
LM224KDE4 cocok untuk 6 aplikasis: Industrial Sensor Signal Conditioning, Active Audio and Low-Frequency Filters, Transducer and Bridge Excitation Interfaces, Power Supply Control and Feedback Loops, Test and Measurement Buffering, Automotive and Equipment Control Modules.
Industrial Sensor Signal Conditioning
The LM224KDE4 is suitable for conditioning low-bandwidth industrial sensor signals because four independent amplifiers can buffer inputs, amplify small differentials, and form active filter stages within one 14-SOIC package. Its 1.2 MHz gain-bandwidth product supports general-purpose signal paths operating well below megahertz bandwidth, while the 30 V supply rating accommodates higher-voltage industrial interfaces. The 2 kV ESD rating adds useful device-level robustness near external connectors, although system-level protection remains necessary. Designers should verify input common-mode range, output swing, and offset behavior against the sensor output before selecting gain values.
Direkomendasikan
Active Audio and Low-Frequency Filters
The LM224KDE4 can implement active low-pass, high-pass, and band-pass filters in audio, communications, and control circuits where four channels reduce board area. A 1.2 MHz gain-bandwidth product gives ample loop-gain margin for many sub-audio-band filters, allowing practical closed-loop operation well below the unity-gain frequency. The four independent amplifiers support separate filter stages or stereo pairs. Stable results depend on suitable resistor and capacitor values, adequate supply bypassing, and keeping input and output nodes away from high-current return paths. Prototype the filter and verify gain, phase margin, output range, and channel-to-channel behavior before production.
Direkomendasikan
Transducer and Bridge Excitation Interfaces
The LM224KDE4 fits instrumentation amplifiers, bridge-sensor front ends, and programmable transducer interfaces requiring several buffered or gain-shaping stages. Its four-channel organization permits an instrumentation-amplifier core, output filter, and auxiliary buffer within a single package, while the 30 V maximum supply rating supports industrial excitation levels. At 1.2 MHz gain-bandwidth product, the device is intended for low- or moderate-bandwidth measurement paths rather than high-speed instrumentation. Validate common-mode headroom, excitation voltage, input bias-current effects, and output drive against the transducer and bridge tolerances before finalizing the gain network.
Direkomendasikan
Power Supply Control and Feedback Loops
The LM224KDE4 is appropriate for slow error-amplifier and feedback-control roles in linear power supplies, regulated outputs, and industrial power modules. Four channels can implement a control amplifier, output buffer, current-loop amplifier, and auxiliary monitoring channel in one package. Its 30 V supply rating is useful when the feedback network operates above typical low-voltage logic levels, and the 1.2 MHz gain-bandwidth product is sufficient for many control loops whose bandwidth is deliberately limited for noise and stability. Compensation must be designed around the amplifier gain-bandwidth behavior, output loading, and the plant delay; otherwise oscillation or slow settling may occur.
Direkomendasikan
Test and Measurement Buffering
The LM224KDE4 can buffer source impedances and condition probe signals in general-purpose test and measurement equipment. Four independent channels allow repeated buffering without requiring separate amplifier packages, and the 1.2 MHz gain-bandwidth product is useful for low-frequency measurement systems with moderate source impedance. The 14-SOIC format simplifies assembly in laboratory instruments and automated test fixtures. Designers should account for amplifier input bias current, capacitive loading, settling behavior, and output-current limits when driving long cables or high-capacitance networks. Isolation, attenuation, and high-voltage protection must be implemented separately because the device is not an instrumentation-protection barrier.
Direkomendasikan
Automotive and Equipment Control Modules
The LM224KDE4 can support low-frequency control, conditioning, and interface functions in industrial equipment and non-safety automotive auxiliary circuits. Its four independent general-purpose amplifiers provide flexible routing of error signals, sensor outputs, and actuator references, while the -25°C to +85°C range covers many commercial and extended-temperature environments. The 2 kV ESD capability improves robustness but does not qualify the device for a specific automotive functional-safety or AEC-Q100 requirement by itself. Confirm the exact ordering qualification, automotive temperature requirement, transient levels, and system protection scheme before using the amplifier in a vehicle or safety-related equipment.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk LM224KDE4 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | LM224KADR | LM224ADR | LM224DR | LM224DG4 | LM224KDR |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC |
| Number of Channels | 4 channels | 4 channels | 4 channels | 4 channels | 4 channels | 4 channels |
| Gain-Bandwidth Product | 1.2 MHz | 1.2 MHz | 1.2 MHz | 1.2 MHz | 1.2 MHz | 1.2 MHz |
| Supply Configuration | Single or split supply | Single or split supply | Single or split supply | Single or split supply | Single or split supply | Single or split supply |
| Amplifier Type | General-purpose operational amplifier | General-purpose operational amplifier | General-purpose operational amplifier | General-purpose operational amplifier | General-purpose operational amplifier | General-purpose operational amplifier |
Diferensiator Kunci
- Documented no-change replacement option (vsLM224KADR)
- Four independent amplifiers in one package (vsLM2902N/PB)
- Higher supply rating than the related LM324 option (vsLM324KDR)
- Improved ESD capability within the LM224 family (vsLM224ADR)
Catatan Desain
Place the positive-supply bypass capacitor directly between the V+ pin and ground, and connect the negative or ground return through a low-impedance path. For split supplies, decouple each supply rail at the device. Keep the capacitor loop short because the four amplifiers can draw transient current when driving capacitive loads. A compact supply-and-ground layout helps prevent output disturbance from appearing as an input signal.
Route each inverting-input trace away from the outputs, supply pins, and other high-impedance input nodes. When an amplifier is configured with a high-gain feedback network, keep the feedback resistor and compensation components close to the relevant input and output pins. This minimizes parasitic capacitance and feedback-loop pickup, which can reduce phase margin or cause oscillation in otherwise stable 1.2 MHz-capable designs.
Do not assume that a matching 14-SOIC footprint guarantees electrical equivalence. Before replacing LM224KDE4, compare maximum supply voltage, input common-mode range, output swing, gain-bandwidth product, slew rate, output-current capability, operating temperature, and ESD rating. Also verify that the alternative uses the same amplifier-to-pin channel arrangement, because package outlines can match while functional assignments differ.
Estimate the maximum signal frequency from the closed-loop gain and the 1.2 MHz gain-bandwidth product, then include additional margin for filter Q, load capacitance, and feedback-component tolerances. For high-Q filters or long feedback loops, prototype the network with realistic loading and probe the phase margin. This is especially important when multiple channels share a board with digital switching circuitry or long unprotected input wiring.
Informasi Konformitas
The available product and distributor information does not establish the requested compliance statuses. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals documentation for the selected ordering code before regulatory submission.