LM2901M96 - 30V Quad Differential Comparator | Harris
MPN: LM2901M96 ✗ Akhir HidupLM2901M96 Ringkasan
A voltage comparator is an analog signal-conditioning IC that compares two input voltages and produces a digital-level output indicating their relationship. The LM2901M96 belongs to the comparator, analog IC, and semiconductor hierarchy. Its four independent channels allow one package to implement multiple threshold decisions, monitoring functions, or logic decisions. Open-collector outputs are compatible with TTL, CMOS, MOS, DTL, and ECL logic families, enabling the device to operate as an interface between analog sensing circuits and digital logic.
Key features include low power consumption, a common-mode input range extending to ground, and open-collector output structure. The common-mode capability is important for single-supply designs in which the sensed signal can approach the lower supply rail. The open-collector outputs can also be pulled up to an appropriate supply voltage and used to drive multiple open-collector-compatible loads when the current and speed requirements are satisfied.
The LM2901M96 is a quad comparator rather than a precision instrumentation amplifier or a dedicated logic gate. Each channel compares its non-inverting and inverting inputs independently, allowing the device to serve as a window comparator, overvoltage detector, or simple signal translator. The M96 designation identifies the Harris packaging variant listed in a 14-SOIC configuration. Its exact electrical limits, offset voltage, response time, input bias current, and output-current ratings should be confirmed in the manufacturer datasheet before production release.
Typical uses include industrial sensor interfaces, battery-powered monitoring circuits, automotive or equipment control systems, switching power-supply fault detection, and general-purpose logic level conditioning. The comparator is particularly useful when a small analog signal must be converted into a stable digital decision before being processed by a microcontroller or logic gate.
For reliable implementation, maintain adequate input common-mode headroom, respect the maximum supply and differential-input ratings, and provide pull-up resistors on each open-collector output. Check output timing against the propagation delay and the required system response time. This page combines manufacturer-family information, package details, sourcing guidance, compatible drop-in options, and practical design considerations for engineers evaluating the LM2901M96.
Alternatif penggantian untuk LM2901M96 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian LM2901M96 (sama faktor bentuk dan footprint) — berbeda di dalam Comparator Type, Output Type.
LM2901M
✅ Drop-InKontak untuk harga
Lihat Datasheet →LM2901M
✅ Drop-InKontak untuk harga
Lihat Datasheet →LM2901A
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
LM2901B-Q1
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
LM2901A
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
LM2901M96 Rating Maksimal & Karakteristik Listrik
| Comparator Type | Quad differential voltage comparator |
| Number of Channels | 4 channels |
| Tegangan Pemuat | 30 V maximum |
| Tipe Output | Open collector |
| Input Common-Mode Voltage | Includes ground |
| Logic Compatibility | TTL, CMOS, MOS, DTL, and ECL |
| Paket | 14-pin SOIC |
| Power Consumption | Low power |
| Tipe Mounting | Surface mount |
Konfigurasi Pin LM2901M96
| Pin produk 1 | OUT 1 — Comparator channel 1 output |
| Pin produk 2 | IN 1- — Comparator channel 1 inverting input |
| Pin produk 3 | IN 1+ — Comparator channel 1 non-inverting input |
| Pin produk 4 | V- — Negative supply or ground connection |
| Pin produk 5 | IN 2+ — Comparator channel 2 non-inverting input |
| Pin produk 6 | IN 2- — Comparator channel 2 inverting input |
| Pin produk 7 | OUT 2 — Comparator channel 2 output |
| Pin produk 8 | OUT 3 — Comparator channel 3 output |
| Pin produk 9 | IN 3- — Comparator channel 3 inverting input |
| Pin produk 10 | IN 3+ — Comparator channel 3 non-inverting input |
| Pin produk 11 | V+ — Positive supply connection |
| Pin produk 12 | IN 4+ — Comparator channel 4 non-inverting input |
| Pin produk 13 | IN 4- — Comparator channel 4 inverting input |
| Pin produk 14 | OUT 4 — Comparator channel 4 output |
Aplikasi Umum
LM2901M96 cocok untuk 6 aplikasis: Industrial Sensor Threshold Detection, Battery-Powered Monitoring Circuit, Overvoltage and Undervoltage Detection, Logic-Level Signal Conditioning, Window Comparator Control Circuit, Power-Supply Fault Detection.
Industrial Sensor Threshold Detection
The LM2901M96 is suitable for converting a sensor-derived analog voltage into a logic decision when the threshold lies close to the lower supply rail. Its common-mode input range includes ground, while four independent channels can monitor several inputs in one package. Place the relevant signal on one input and a precision reference on the other, then use a pull-up resistor at the open-collector output. The main engineering consideration is ensuring that the reference and signal remain inside the input limits across tolerance, temperature, and supply variation.
Direkomendasikan
Battery-Powered Monitoring Circuit
The LM2901M96 works in low-power monitoring systems because the LM2901 family is identified as a low-power quad comparator and its common-mode range includes ground. This allows a battery-derived voltage or protected sensor signal to be compared against a low reference without requiring a mid-supply input bias. The design should use the lowest stable supply that satisfies the common-mode and output requirements, retain pull-up resistors sized for low standby current, and verify leakage behavior at the highest operating temperature.
Direkomendasikan
Overvoltage and Undervoltage Detection
Four independent LM2901M96 channels can implement multiple protection decisions, such as monitoring a 30-V-class rail or coordinating several subsystem thresholds. The open-collector outputs can directly feed a supervisor, relay driver, or digital control input after appropriate pull-up selection. Because comparator output state depends on input offset, overdrive, and propagation delay, establish the required safety margin and response time from the datasheet rather than relying on nominal values alone.
Direkomendasikan
Logic-Level Signal Conditioning
The LM2901M96 can translate a slowly changing analog signal into a logic-compatible decision for TTL, CMOS, MOS, DTL, or ECL circuitry. Its open-collector structure requires a pull-up to the destination logic rail, which also provides flexibility when interfacing systems operating at different logic voltages. Account for the pull-up network in the propagation-delay and power budget, and keep sensitive comparator inputs away from high-current switching nodes to reduce false transitions.
Direkomendasikan
Window Comparator Control Circuit
Two LM2901M96 channels can be combined to detect whether a monitored voltage lies above a lower threshold and below an upper threshold. The two open-collector outputs can be combined with suitable pull-up logic to produce a valid-window indication for a control system. This application requires careful reference selection and hysteresis analysis so that offset voltage and noise do not cause chatter near either boundary. The remaining two channels can monitor another voltage or provide an independent fault signal.
Direkomendasikan
Power-Supply Fault Detection
The LM2901M96 can supervise derived power rails by comparing monitored voltages with reference thresholds and driving open-collector fault signals. Four channels provide room to monitor several rails, while the 30-V-class device family is relevant to industrial supply designs. Choose pull-up rails compatible with the receiving logic, account for the power rail's tolerance and startup transient, and verify that every monitored node stays within the comparator's common-mode range during fault conditions.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk LM2901M96 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | LM2901M | LM2901A | LM2901B-Q1 |
|---|---|---|---|---|
| Package | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC |
| Brand | Harris | Texas Instruments or onsemi | 3PEAK or STMicroelectronics | Texas Instruments |
| Comparator Configuration | Quad differential comparator | Quad differential comparator | Quad differential comparator | Quad differential comparator |
| Common-Mode Input Includes Ground | Yes | Yes | Yes | Yes |
| Power Class | Low power | Low power | Low power | Lower supply current |
Diferensiator Kunci
- Four independent channels in one package (vsLM2902N/PB)
- Automotive-grade alternative with improved operating characteristics (vsLM2901B-Q1)
- Single-supply-friendly input range (vsLM2901A)
Catatan Desain
Do not assume that every LM2901-family suffix is automatically interchangeable. The LM2901M96 is the Harris M96 catalog designation, while other manufacturers use LM2901M or LM2901A for related devices. Before substitution, verify the complete 14-pin SOIC pinout, supply and common-mode limits, output electrical characteristics, temperature grade, and qualification status in the relevant manufacturer datasheet.
Place each comparator input directly beside its corresponding channel and keep the input traces short and away from switching nodes. The open-collector outputs should have compact pull-up resistors placed near the device to limit rise time and reduce susceptibility to coupling. Maintain a stable ground reference for all four channels; common supply impedance can otherwise create output errors that appear unrelated to the intended input comparison.
Estimate the pull-up network dissipation before committing to a resistor value. Estimated: with a 5 V pull-up, a 10 kΩ resistor, and the output continuously low, the resistor dissipates approximately P = V²/R = 5²/10,000 = 2.5 mW and sinks about 0.5 mA. This calculation excludes comparator leakage and should be repeated with the actual logic rail, resistor tolerance, and duty cycle.
Comparator output timing depends on input overdrive and the pull-up network, so include hysteresis where a slowly changing signal could produce repeated transitions. Use a Schmitt-trigger stage after the LM2901M96 when the downstream system cannot tolerate chatter. Also verify that the output pull-up voltage remains within the receiver's allowed range and that the comparator's output leakage is acceptable when the output is high.
Informasi Konformitas
No definitive compliance declarations for the exact Harris LM2901M96 ordering designation were included in the retrieved product information. Confirm material and environmental compliance with the manufacturer before procurement.