Harris Corporation

LM2901M96 - 30V Quad Differential Comparator | Harris

MPN: LM2901M96 ✗ پایان تولید
30 V maximum Vdss 14-pin SOIC Package
حداقل سفارش: 1 |

LM2901M96 نمای کلی

The Harris LM2901M96 is a low-power quad differential voltage comparator designed for general-purpose signal conditioning and logic-interface applications. It contains four independent comparison channels in a 14-pin SOIC package and operates from a single or dual supply, with a common-mode input voltage range that includes ground. The device is identified by the manufacturer as a 30-V quad differential comparator, making it suitable for industrial control, sensor interface, and low-voltage logic applications.

A voltage comparator is an analog signal-conditioning IC that compares two input voltages and produces a digital-level output indicating their relationship. The LM2901M96 belongs to the comparator, analog IC, and semiconductor hierarchy. Its four independent channels allow one package to implement multiple threshold decisions, monitoring functions, or logic decisions. Open-collector outputs are compatible with TTL, CMOS, MOS, DTL, and ECL logic families, enabling the device to operate as an interface between analog sensing circuits and digital logic.

Key features include low power consumption, a common-mode input range extending to ground, and open-collector output structure. The common-mode capability is important for single-supply designs in which the sensed signal can approach the lower supply rail. The open-collector outputs can also be pulled up to an appropriate supply voltage and used to drive multiple open-collector-compatible loads when the current and speed requirements are satisfied.

The LM2901M96 is a quad comparator rather than a precision instrumentation amplifier or a dedicated logic gate. Each channel compares its non-inverting and inverting inputs independently, allowing the device to serve as a window comparator, overvoltage detector, or simple signal translator. The M96 designation identifies the Harris packaging variant listed in a 14-SOIC configuration. Its exact electrical limits, offset voltage, response time, input bias current, and output-current ratings should be confirmed in the manufacturer datasheet before production release.

Typical uses include industrial sensor interfaces, battery-powered monitoring circuits, automotive or equipment control systems, switching power-supply fault detection, and general-purpose logic level conditioning. The comparator is particularly useful when a small analog signal must be converted into a stable digital decision before being processed by a microcontroller or logic gate.

For reliable implementation, maintain adequate input common-mode headroom, respect the maximum supply and differential-input ratings, and provide pull-up resistors on each open-collector output. Check output timing against the propagation delay and the required system response time. This page combines manufacturer-family information, package details, sourcing guidance, compatible drop-in options, and practical design considerations for engineers evaluating the LM2901M96.

جایگزین‌های drop-in برای LM2901M96 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای LM2901M96 (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Comparator Type, Output Type.

Texas Instruments
Comparator Type: 4-channel differential analog comparator
Output Type: Open-collector
مقایسه با LM2901M96 →

LM2901M

✅ جایگزین مستقیم
Texas Instruments
📦 14-SOIC
4-channel differential analog comparator · 4 channels · 2 V to 36 V · Approximately ±1 V to ±18 V · 1.3 µs · Open-collector · 800 µA · 25 nA

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LM2901M

✅ جایگزین مستقیم
Texas Instruments
📦 14-SOIC
4-channel differential analog comparator · 4 channels · 2 V to 36 V · Approximately ±1 V to ±18 V · 1.3 µs · Open-collector · 800 µA · 25 nA

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

LM2901A

✅ جایگزین مستقیم
📦 14-SOIC
Quad comparator with single- or dual-supply operation and common-mode input including ground; exact offsets and timing differ

📋 جایگزین مرجع (خارج از کاتالوگ)

LM2901B-Q1

✅ جایگزین مستقیم
📦 14-SOIC
Automotive-qualified improved LM2901 generation with lower offset and supply current and higher supply capability

📋 جایگزین مرجع (خارج از کاتالوگ)

LM2901A

✅ جایگزین مستقیم
📦 14-SOIC
Low-power quad differential comparator family with 30-V-oriented operation; exact MPN suffix and ratings require verification

📋 جایگزین مرجع (خارج از کاتالوگ)

LM2901M96 حداکثر مقادیر مجاز و مشخصات الکتریکی

Comparator Type Quad differential voltage comparator
Number of Channels 4 channels
ولتاژ تغذیه 30 V maximum
نوع خروجی Open collector
Input Common-Mode Voltage Includes ground
Logic Compatibility TTL, CMOS, MOS, DTL, and ECL
بسته‌بندی 14-pin SOIC
Power Consumption Low power
نوع نصب Surface mount

پیکربندی پین LM2901M96

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
پین 1 OUT 1 — Comparator channel 1 output
پین 2 IN 1- — Comparator channel 1 inverting input
پین 3 IN 1+ — Comparator channel 1 non-inverting input
پین 4 V- — Negative supply or ground connection
پین 5 IN 2+ — Comparator channel 2 non-inverting input
پین 6 IN 2- — Comparator channel 2 inverting input
پین 7 OUT 2 — Comparator channel 2 output
پین 8 OUT 3 — Comparator channel 3 output
پین 9 IN 3- — Comparator channel 3 inverting input
پین 10 IN 3+ — Comparator channel 3 non-inverting input
پین 11 V+ — Positive supply connection
پین 12 IN 4+ — Comparator channel 4 non-inverting input
پین 13 IN 4- — Comparator channel 4 inverting input
پین 14 OUT 4 — Comparator channel 4 output

کاربردهای معمول

LM2901M96 مناسب است برای 6 کاربردs: Industrial Sensor Threshold Detection, Battery-Powered Monitoring Circuit, Overvoltage and Undervoltage Detection, Logic-Level Signal Conditioning, Window Comparator Control Circuit, Power-Supply Fault Detection.

🏭

Industrial Sensor Threshold Detection

The LM2901M96 is suitable for converting a sensor-derived analog voltage into a logic decision when the threshold lies close to the lower supply rail. Its common-mode input range includes ground, while four independent channels can monitor several inputs in one package. Place the relevant signal on one input and a precision reference on the other, then use a pull-up resistor at the open-collector output. The main engineering consideration is ensuring that the reference and signal remain inside the input limits across tolerance, temperature, and supply variation.

⚡

Battery-Powered Monitoring Circuit

The LM2901M96 works in low-power monitoring systems because the LM2901 family is identified as a low-power quad comparator and its common-mode range includes ground. This allows a battery-derived voltage or protected sensor signal to be compared against a low reference without requiring a mid-supply input bias. The design should use the lowest stable supply that satisfies the common-mode and output requirements, retain pull-up resistors sized for low standby current, and verify leakage behavior at the highest operating temperature.

🔧

Overvoltage and Undervoltage Detection

Four independent LM2901M96 channels can implement multiple protection decisions, such as monitoring a 30-V-class rail or coordinating several subsystem thresholds. The open-collector outputs can directly feed a supervisor, relay driver, or digital control input after appropriate pull-up selection. Because comparator output state depends on input offset, overdrive, and propagation delay, establish the required safety margin and response time from the datasheet rather than relying on nominal values alone.

🌐

Logic-Level Signal Conditioning

The LM2901M96 can translate a slowly changing analog signal into a logic-compatible decision for TTL, CMOS, MOS, DTL, or ECL circuitry. Its open-collector structure requires a pull-up to the destination logic rail, which also provides flexibility when interfacing systems operating at different logic voltages. Account for the pull-up network in the propagation-delay and power budget, and keep sensitive comparator inputs away from high-current switching nodes to reduce false transitions.

📺

Window Comparator Control Circuit

Two LM2901M96 channels can be combined to detect whether a monitored voltage lies above a lower threshold and below an upper threshold. The two open-collector outputs can be combined with suitable pull-up logic to produce a valid-window indication for a control system. This application requires careful reference selection and hysteresis analysis so that offset voltage and noise do not cause chatter near either boundary. The remaining two channels can monitor another voltage or provide an independent fault signal.

🖥️

Power-Supply Fault Detection

The LM2901M96 can supervise derived power rails by comparing monitored voltages with reference thresholds and driving open-collector fault signals. Four channels provide room to monitor several rails, while the 30-V-class device family is relevant to industrial supply designs. Choose pull-up rails compatible with the receiving logic, account for the power rail's tolerance and startup transient, and verify that every monitored node stays within the comparator's common-mode range during fault conditions.

What is the LM2901M96?
The LM2901M96 is a Harris low-power quad differential voltage comparator with four independent channels and an open-collector output stage. The device is listed in a 14-pin SOIC package, and its output is compatible with TTL, CMOS, MOS, DTL, and ECL logic. According to the manufacturer product information and distributor technical listings, it is intended for general-purpose comparator, signal-conditioning, and logic-interface applications.
What is the operating voltage of LM2901M96?
The LM2901M96 is rated for operation up to 30 V, making it suitable for circuits using supply voltages below that limit. The exact minimum supply, common-mode limits, and absolute maximum ratings must be taken from the Harris LM2901M96 datasheet. The 30-V figure is identified in the manufacturer-family information as the defining supply-voltage capability of the LM2901 series.
Where can I download the LM2901M96 datasheet PDF?
The LM2901M96 datasheet information is available through the Harris datasheet page and the linked manufacturer-family documentation. Use the Harris LM2901M96 datasheet page to obtain the PDF and confirm the exact electrical characteristics, pin descriptions, ordering information, and test conditions. The product page identifies the part as a low-power quad differential comparator with open-collector outputs.
Where is the LM2901M96 pinout located?
The LM2901M96 pinout is found in the manufacturer datasheet under the pin configuration or pin-description section. The device is listed in a 14-pin SOIC package, and the pin arrangement should be used directly when assigning the four comparator channels, supply pins, ground pins, and output connections. Verify pin numbering against the Harris documentation before laying out or modifying a PCB.
Can LM2901M96 operate from a single supply?
Yes, the LM2901M96 can be used in single-supply designs because its common-mode input voltage range includes ground. This is useful for monitoring battery or low-voltage sensor signals that operate near the lower supply rail. The supply arrangement must still comply with the absolute maximum ratings and the input common-mode limits specified in the manufacturer datasheet.
What logic families can the LM2901M96 output drive?
The LM2901M96 open-collector outputs are compatible with TTL, CMOS, MOS, DTL, and ECL logic families according to the product listing. Pull-up resistors are required because the open-collector stage does not actively drive the output high. Select the pull-up voltage and resistance based on the logic supply, output leakage current, speed requirement, and number of connected inputs.
What can replace the LM2901M96?
The LM2901M and related quad comparator families can be candidates for replacement when they use the same 14-SOIC footprint and meet the required electrical limits. The listed alternatives include TI LM2901M, onsemi LM2901M, 3PEAK LM2901A, and TI LM2901B-Q1. Confirm pinout, supply range, common-mode range, output type, propagation delay, and automotive requirements before substitution.
Is the LM2901M96 the same as LM2901M?
The LM2901M96 is the Harris M96 ordering designation for the LM2901 quad comparator family, while LM2901M is commonly used by other manufacturers for related 14-SOIC versions. They share the basic quad-comparator and open-collector architecture, but electrical parameters, qualification, temperature grades, and manufacturer-specific details may differ. Treat LM2901M as a potential drop-in candidate only after checking its datasheet.
LM2901M96 vs LM2901M - which is better for an industrial control board?
Choose the LM2901M96 when the design specifically calls for the Harris M96 device and its documented supply, temperature, and qualification characteristics. Choose another LM2901M implementation when it offers a needed qualification, lifecycle commitment, or better matching parameter at the same 14-SOIC footprint. For industrial control, the decision should also consider input offset, noise immunity, propagation delay, and availability.
When should I choose LM2901M96 over LM2901A?
Choose LM2901M96 when the PCB is designed around the Harris M96 device and its specified electrical behavior. Choose LM2901A when its verified 14-SOIC pinout and electrical ratings provide a better match for offset, supply range, speed, or lifecycle requirements. The two parts perform the same general function of four independent voltage comparisons, but naming similarity alone does not guarantee production interchangeability.
What is the best cross-brand equivalent for LM2901M96?
The TI LM2901M and onsemi LM2901M are the closest cross-brand candidates in the retrieved listings because each is a general-purpose open-collector quad comparator offered in a 14-SOIC package. The 3PEAK LM2901A is another quad-comparator family with single- or dual-supply capability and a common-mode range including ground. Final equivalence depends on verified pin compatibility and application-specific electrical limits.
Where can I buy LM2901M96 and check its lead time?
Use the Request a Quote form on this page to request current LM2901M96 availability, minimum order quantity, and lead time. The retrieved marketplace listing shows a Harris LM2901M96 catalog entry, but current stock and delivery information should be confirmed through the quote workflow. Package and suffix requirements should be stated with the request.
How much does LM2901M96 cost?
Use the Request a Quote form on this page for the current unit price and quantity breaks for LM2901M96. Pricing can vary with order quantity, procurement volume, date, and exact packaging or manufacturer status. The quote request keeps the commercial response tied to the exact Harris LM2901M96 orderable designation rather than a generic LM2901 family number.
Is LM2901M96 in stock?
Current LM2901M96 stock should be requested through the Request a Quote form on this page. The existence of a distributor catalog entry does not by itself establish present inventory. Include your required quantity, target date, and permitted alternative manufacturers when submitting the request so sourcing can confirm the exact 14-SOIC device.
What are the key specifications of LM2901M96 that engineers should know?
The central specifications are four independent comparator channels, a 30-V maximum supply rating, a common-mode input range that includes ground, and open-collector outputs compatible with TTL, CMOS, MOS, DTL, and ECL. The device is listed in a 14-pin SOIC package. Offset voltage, supply current, propagation delay, temperature range, and absolute input limits must be confirmed from the manufacturer datasheet.
How should pull-up resistors be selected for LM2901M96 outputs?
Select each LM2901M96 output pull-up to match the driven logic supply and the required switching speed while keeping output current within the comparator's rated limits. Start by calculating worst-case sink current from the pull-up voltage and resistance, then add the leakage and load currents. A smaller resistance lowers transition time but increases power and continuous sink current.

داده‌های مرجع مهندسی برای LM2901M96 — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the LM2901M96 when the design requires a Harris quad differential comparator in a 14-SOIC footprint and the application can operate within the documented 30-V-class supply capability. Its four independent channels and common-mode input range including ground make it useful for multi-level thresholding, sensor conditioning, and open-collector logic interfaces. Choose TI LM2901B-Q1 when automotive qualification or improved offset, supply-current, speed, or supply-voltage characteristics are priorities. Choose the TI or onsemi LM2901M when that manufacturer's documentation provides a closer electrical match or lifecycle advantage. Choose 3PEAK LM2901A when its verified single- or dual-supply operation and specification set better satisfy the circuit. Before approving any replacement, confirm the physical pinout, input voltage limits, output-current capability, propagation delay, temperature grade, and qualification requirements.

مقایسه با جایگزین‌ها

پارامتر این محصول LM2901M LM2901A LM2901B-Q1
Package 14-SOIC 14-SOIC 14-SOIC 14-SOIC
Brand Harris Texas Instruments or onsemi 3PEAK or STMicroelectronics Texas Instruments
Comparator Configuration Quad differential comparator Quad differential comparator Quad differential comparator Quad differential comparator
Common-Mode Input Includes Ground Yes Yes Yes Yes
Power Class Low power Low power Low power Lower supply current

تفاوت‌های کلیدی

  • Four independent channels in one package (در مقابلLM2902N/PB)
  • Automotive-grade alternative with improved operating characteristics (در مقابلLM2901B-Q1)
  • Single-supply-friendly input range (در مقابلLM2901A)

یادداشت‌های طراحی

Do not assume that every LM2901-family suffix is automatically interchangeable. The LM2901M96 is the Harris M96 catalog designation, while other manufacturers use LM2901M or LM2901A for related devices. Before substitution, verify the complete 14-pin SOIC pinout, supply and common-mode limits, output electrical characteristics, temperature grade, and qualification status in the relevant manufacturer datasheet.

Place each comparator input directly beside its corresponding channel and keep the input traces short and away from switching nodes. The open-collector outputs should have compact pull-up resistors placed near the device to limit rise time and reduce susceptibility to coupling. Maintain a stable ground reference for all four channels; common supply impedance can otherwise create output errors that appear unrelated to the intended input comparison.

Estimate the pull-up network dissipation before committing to a resistor value. Estimated: with a 5 V pull-up, a 10 kΩ resistor, and the output continuously low, the resistor dissipates approximately P = V²/R = 5²/10,000 = 2.5 mW and sinks about 0.5 mA. This calculation excludes comparator leakage and should be repeated with the actual logic rail, resistor tolerance, and duty cycle.

Comparator output timing depends on input overdrive and the pull-up network, so include hysteresis where a slowly changing signal could produce repeated transitions. Use a Schmitt-trigger stage after the LM2901M96 when the downstream system cannot tolerate chatter. Also verify that the output pull-up voltage remains within the receiver's allowed range and that the comparator's output leakage is acceptable when the output is high.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

No definitive compliance declarations for the exact Harris LM2901M96 ordering designation were included in the retrieved product information. Confirm material and environmental compliance with the manufacturer before procurement.

جستجوهای مرتبط

LM2901M96 datasheet LM2901M96 pinout LM2901M96 datasheet pdf LM2901M96 equivalent LM2901M96 replacement LM2901M96 14-SOIC LM2901M96 open collector comparator LM2901M96 30V comparator Harris LM2901M96 LM2901M96 price LM2901M96 stock LM2901M96 vs LM2901B-Q1

قطعات و اصطلاحات مرتبط

Harris LM2901M96 LM2901M LM2901A LM2901B-Q1 Texas Instruments onsemi 3PEAK STMicroelectronics quad differential comparator voltage comparator analog IC semiconductor open-collector output single-supply operation common-mode input voltage TTL CMOS MOS DTL ECL 14-SOIC SOIC package family surface-mount package industrial sensor interface power-supply fault detection
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ