Texas Instruments

LM2903VQDR - Dual Differential Comparator | Texas Instruments

MPN: LM2903VQDR ✓ Aktif
2 V to 36 V Vdss 0.5 nA Id SOIC (D), 8 pins Package
MOQ: 1 |

LM2903VQDR Ringkasan

Texas Instruments LM2903VQDR is a dual differential comparator with open-collector outputs, a 2 V to 36 V supply range, and an operating temperature range of -40°C to +125°C, housed in an 8-pin SOIC (D) package. Each channel compares one differential input pair and provides an open-collector output suitable for wired logic, relay drive, and industrial sensing circuits.

A differential comparator is an analog integrated circuit that compares two input voltages and produces a digital logic state indicating which input is higher. The LM2903V belongs to the comparator hierarchy: differential comparator, voltage comparator, analog comparator, and ultimately semiconductor. Its two channels allow one packaged device to perform two independent threshold decisions, reducing component count when a system requires multiple sensing or control functions.

The device operates from a 2 V minimum supply to a 36 V maximum supply, giving it broad compatibility with industrial control voltages. The distributor specifications identify an input bias current of 0.5 nA and a supply current of 0.8 mA. Its open-collector outputs can sink output current from external pull-up circuitry, and the 8-pin SOIC package supports conventional surface-mount assembly and automated inspection.

The enhanced-voltage LM2903V family is intended for applications that benefit from wide supply-voltage operation and low input bias current. A high-impedance input stage can limit loading on slow sensor signals, while the open-collector output provides flexibility in voltage-domain interfacing. Because the output transistor is open, the external pull-up voltage can be selected independently within the design's logic constraints.

Typical uses include industrial process-limit detection, automotive and battery-powered control systems, motor and relay interfaces, window-comparator circuits, and low-frequency sensor conditioning. In a threshold circuit, one input can receive the sensed voltage and the other can receive a reference. The output changes state when their relationship crosses the configured threshold, allowing the result to drive another logic stage or an external transistor.

Design the pull-up network carefully because it determines output voltage, rise time, and available sink current. Place the pull-up resistor close to the open-collector output, keep comparator inputs away from switching-current paths, and provide a stable reference with low noise when threshold accuracy matters. The open-collector pins can also be tied together for wired-AND behavior when the circuit requires multiple fault signals to share one node.

This product page combines device specifications, application guidance, drop-in replacement options, and parameter-by-parameter comparison information. It helps engineers determine whether the LM2903VQDR's voltage range, low input bias current, open-collector interface, and extended temperature coverage match the mechanical and electrical requirements of a specific PCB design.

Alternatif penggantian untuk LM2903VQDR — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian LM2903VQDR (sama faktor bentuk dan footprint) — berbeda di dalam Input Bias Current, Supply Current, Number of Channels, Output Type, Operating Temperature Range.

Texas Instruments
Input Bias Current: 3.5 nA
Supply Current: 200 µA per comparator
Operating Temperature Range: -40 °C to +125 °C
Bandingkan dengan LM2903VQDR →
Texas Instruments
Input Bias Current: 25 nA typical
Supply Current: 0.4 mA per comparator
Number of Channels: 2
Bandingkan dengan LM2903VQDR →
Texas Instruments
Operating Temperature Range: -40 °C to +125 °C
Bandingkan dengan LM2903VQDR →

LM2903QDRQ1

✅ Drop-In
Texas Instruments
📦 SOIC-8
Dual differential comparator · 2 · AEC-Q100 Grade 0 and Grade 1 · 2 V to 36 V · Total supply difference of 2 V to 36 V · 0.4 mA per comparator · 2 mV typical · 25 nA typical

Kontak untuk harga

Lihat Datasheet →

LM2903BIDR

✅ Drop-In
Texas Instruments
📦 SOIC-8
Dual differential comparator · 2 channels · Open-collector · 36 V · 2 V · 0.37 mV · 3.5 nA · 200 µA per comparator

Kontak untuk harga

Lihat Datasheet →

LM2903VQDR

✅ Drop-In
Texas Instruments
📦 SOIC-8
Dual differential comparator · 2 channels · 2 V to 36 V · Open-collector · 0.5 nA · 0.8 mA · 370 uV · -40°C to +125°C

Kontak untuk harga

Lihat Datasheet →

LM2903DT

✅ Drop-In
📦 SOIC-8
Shared dual-comparator SOIC-8 architecture with a stated response time of 1.3 us; the LM2903VQDR response comparison is 0.5 us different.

📋 Alternatif referensi (tidak dalam katalog)

LM2903DQ

✅ Drop-In
📦 SOIC-8
Uses an 8-pin SOP package, open-drain outputs, and the same -40°C to +125°C temperature range; the LM2903VQDR package and temperature limits differ by 0.

📋 Alternatif referensi (tidak dalam katalog)

LM2903VQDR Rating Maksimal & Karakteristik Listrik

Comparator Type Dual differential comparator
Number of Channels 2 channels
Supply Voltage Range 2 V to 36 V
Tipe Output Open-collector
Input Bias Current 0.5 nA
Arus Pemuat 0.8 mA
Offset Voltage 370 uV
Rentang Suhu Kerja -40°C to +125°C
Package Type SOIC (D), 8 pins
Package Pin Count 8 pins
Tipe Mounting Surface mount
Comparator Class Enhanced voltage
Output Wiring Open-collector wired-logic output

Konfigurasi Pin LM2903VQDR

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin produk 1 OUT1 — Open-collector output for comparator channel 1
Pin produk 2 IN1- — Inverting input for comparator channel 1
Pin produk 3 IN1+ — Non-inverting input for comparator channel 1
Pin produk 4 V- — Ground or negative supply connection
Pin produk 5 IN2+ — Non-inverting input for comparator channel 2
Pin produk 6 IN2- — Inverting input for comparator channel 2
Pin produk 7 OUT2 — Open-collector output for comparator channel 2
Pin produk 8 V+ — Positive supply connection

Aplikasi Umum

LM2903VQDR cocok untuk 6 aplikasis: Industrial Sensor Threshold Detection, Automotive Control and Logic Interface, Relay and Actuator Interfacing, Battery-Powered Monitoring, Power-Supply Window Monitoring, Zero-Cross and Level Detection.

🏭

Industrial Sensor Threshold Detection

The LM2903VQDR is well suited to comparing a low-current sensor signal with a reference voltage because each channel provides 0.5 nA input bias current and operates from 2 V to 36 V. Place the sensed voltage on one input and the threshold reference on the other, then use the open-collector output to alert a controller or request a relay action. The low bias current limits input loading, while the wide supply range supports industrial control voltages. The main design consideration is input common-mode range: both inputs must remain within the comparator's permitted operating region at every supply voltage and temperature.

🚗

Automotive Control and Logic Interface

The LM2903VQDR's -40°C to +125°C operating range makes it applicable to automotive control, battery monitoring, and actuator-logic circuits where temperature variation is significant. Its dual-channel arrangement can independently monitor a system signal and a safety threshold, reducing board area. The open-collector output can pull up to the logic rail through a resistor or drive a suitable transistor. Designers should confirm common-mode limits, output current, ESD requirements, and automotive qualification requirements for the complete assembly rather than relying only on the temperature rating.

⚡

Relay and Actuator Interfacing

The LM2903VQDR can generate a low-side control signal for relay, solenoid, or motor-driver circuitry through its open-collector output. Place a pull-up resistor on the output so the comparator can sink the logic current, then connect the collector to an N-channel MOSFET or NPN transistor gate or base. This arrangement keeps the inductive load away from the comparator and permits the pull-up voltage to match the controller logic domain. Add a flyback diode across the coil and verify the output sink-current and voltage ratings in the manufacturer datasheet.

🔋

Battery-Powered Monitoring

The LM2903VQDR is useful for battery-powered monitoring because it accepts a 2 V minimum supply and has a stated 0.8 mA supply current for the dual device. Two channels can monitor pack voltage and a secondary threshold, helping implement simple overvoltage, undervoltage, or state-of-charge decisions. The open-collector output can remain unpowered or be pulled to a low-power logic rail, depending on the system architecture. Ensure that the comparator's quiescent current, input leakage, and reference circuit consumption are acceptable for the target standby-time budget.

📺

Power-Supply Window Monitoring

The two LM2903VQDR channels can implement upper and lower thresholds for a monitored power rail. One comparator channel detects the rail crossing above the upper limit, while the other detects operation below the lower limit. Using the open-collector outputs with pull-up resistors allows the resulting states to be combined for fault signaling. The 2 V to 36 V device supply range supports monitoring of widely distributed voltage rails, but the monitored input must stay within the comparator's common-mode limits. Account for input offset when defining guard bands around critical thresholds.

🔧

Zero-Cross and Level Detection

The LM2903VQDR can detect when a bipolar or offset signal crosses a configurable reference level. Use the appropriate input polarity so the output state identifies whether the signal is above or below the threshold, and add positive feedback or hysteresis when noise near the transition could otherwise cause repeated switching. Its 0.5 nA input bias current is helpful for high-impedance signal sources, while the open-collector output supports flexible pull-up arrangements. Check input common-mode voltage, output timing, and the pull-up resistor's effect on rise time.

Ringkasan Produk Direkomendasikan

LM2903QDR Related dual comparator Digunakan di dalam: Industrial Sensor Threshold Detection, Automotive Control and Logic Interface, Power-Supply Window Monitoring LM2903BIDR Texas Instruments Digunakan di dalam: Industrial Sensor Threshold Detection, Automotive Control and Logic Interface, Power-Supply Window Monitoring LM2903DT Related low-power dual comparator Digunakan di dalam: Relay and Actuator Interfacing, Battery-Powered Monitoring, Zero-Cross and Level Detection LM2903DQ Open-drain dual comparator option Digunakan di dalam: Relay and Actuator Interfacing, Battery-Powered Monitoring LM2903VQDR Texas Instruments Digunakan di dalam: Zero-Cross and Level Detection
What is the LM2903VQDR?
The LM2903VQDR is a Texas Instruments dual differential comparator with two independent channels, open-collector outputs, and an 8-pin SOIC package. According to the Texas Instruments LM2903V product page, it is the enhanced-voltage LM2903 family option rated for a 2 V to 36 V supply range and an operating temperature range of -40°C to +125°C. Each channel compares its IN+ and IN- inputs and controls one open-collector output.
What are the key specifications of LM2903VQDR that engineers should know?
The LM2903VQDR combines two differential-comparator channels, open-collector outputs, a 2 V to 36 V supply range, and an 8-pin SOIC package. The Texas Instruments LM2903V product information identifies 0.8 mA supply current, 0.5 nA input bias current, and a 370 uV offset-voltage figure for this ordering variant. Its -40°C to +125°C operating range makes it suitable for industrial and automotive temperature ranges when other system requirements are satisfied.
What is the supply voltage range of LM2903VQDR?
The LM2903VQDR operates from 2 V to 36 V across its supply pins. This wide range is a defining feature of the enhanced-voltage LM2903V family described by Texas Instruments. The 2 V minimum permits operation in low-voltage control systems, while the 36 V maximum supports higher-voltage industrial interfaces. Actual usable input and output common-mode limits must also remain within the device's operating conditions.
Where can I download the LM2903VQDR datasheet PDF?
The LM2903VQDR datasheet is available through the Texas Instruments LM2903V product page at https://www.ti.com/product/LM2903V. The dedicated ordering page for LM2903VQDR is https://www.ti.com/product/LM2903V/part-details/LM2903VQDR and identifies the part as an 8-pin SOIC (D) device rated from -40°C to 125°C. Use the manufacturer document for the authoritative pin description, limits, timing characteristics, and recommended operating conditions.
Where can I find the LM2903VQDR pinout?
The LM2903VQDR uses an 8-pin SOIC (D) package with pins 1 and 7 assigned to the two open-collector outputs, pins 2 and 6 to the inverting inputs, pins 3 and 5 to the non-inverting inputs, pin 4 to ground, and pin 8 to the supply. Confirm the numbering against the manufacturer datasheet before laying out the PCB or assigning nets.
Is LM2903VQDR suitable for industrial control applications?
The LM2903VQDR is suitable for many industrial control applications because it operates from 2 V to 36 V and across -40°C to +125°C. Its 0.5 nA input bias current can also reduce loading on high-impedance sensors. The open-collector outputs can drive an external relay-driver transistor or logic pull-up network, while the 8-pin SOIC package is compatible with standard surface-mount assembly.
Can LM2903VQDR drive a relay directly?
The LM2903VQDR should normally drive a relay through a suitable transistor rather than by connecting the relay coil directly to the comparator output. Its open-collector output is designed to sink current from an external pull-up, and the relay coil requires its own supply and flyback protection. The relevant output sink-current and voltage limits must be checked in the manufacturer datasheet before selecting the driver transistor and flyback diode.
What can replace LM2903VQDR?
The LM2903QDR, LM2903BIDR, ROHM LM2903VQDR, STMicroelectronics LM2903DT, and 3PEAK LM2903DQ are candidate 8-pin SOIC replacements for the LM2903VQDR. Compatibility depends on the required supply range, input common-mode range, output sink current, offset voltage, response time, and exact pin arrangement. Treat a candidate as a true production drop-in only after comparing those limits and the manufacturer pinout.
What is the best ROHM equivalent for LM2903VQDR?
The ROHM Semiconductor LM2903VQDR is the closest identified cross-brand equivalent because it carries the same ordering code, operates in the 8-pin SOIC format, and is described as a dual comparator with open-collector output. The Texas Instruments and ROHM versions should nevertheless be compared for input bias current, supply current, common-mode limits, output timing, and any manufacturer-specific test conditions before substitution.
Is LM2903VQDR the same as LM2903QDR?
The LM2903VQDR and LM2903QDR are related 8-pin SOIC members of the Texas Instruments LM2903 family, but the V ordering designation identifies the enhanced-voltage version. Both use the same general dual differential-comparator architecture and open-collector outputs. Confirm the ordering table and electrical limits because suffix differences can change grading, temperature coverage, or tested performance parameters even when the footprint remains unchanged.
LM2903VQDR vs LM2903BIDR - which is better for a drop-in design?
The LM2903BIDR is the better candidate when the design specifically requires Texas Instruments' B-version LM2903 feature set, while the LM2903VQDR remains appropriate when its enhanced-voltage characteristics are specified. Both are dual comparators in 8-pin SOIC packages. The selection should be based on the required supply, offset, response-time, and temperature limits rather than package appearance alone.
When should I choose LM2903VQDR over LM2903DT?
Choose the LM2903VQDR when your design requires the Texas Instruments enhanced-voltage LM2903V characteristics, including a 2 V to 36 V supply range and -40°C to +125°C operation. Consider the STMicroelectronics LM2903DT for an established low-power dual-comparator alternative after checking its input common-mode range, output current, offset, and response time. The shared SOIC-8 footprint alone does not establish electrical equivalence.
Where can I buy LM2903VQDR online?
Use the Request a Quote form on this page to request current LM2903VQDR availability, lead time, order quantity, and sourcing support. The part is manufactured by Texas Instruments and is also listed by authorized distribution channels, but inventory and commercial terms can change. The form is the appropriate route for a current quotation tied to the exact LM2903VQDR ordering code.
What is the price of LM2903VQDR?
The current LM2903VQDR quotation is available through the Request a Quote form on this page. Pricing depends on order quantity, package quantity, required delivery date, and current component availability. Submit the exact MPN LM2903VQDR with your target quantity so the quotation reflects the correct Texas Instruments ordering configuration rather than a related comparator.
Is LM2903VQDR in stock and what is its lead time?
Current stock status and lead time for LM2903VQDR should be confirmed through the Request a Quote form on this page. The exact quantity and required delivery date determine the most useful availability response. Texas Instruments identifies the part as an 8-pin SOIC (D) ordering option within the LM2903V family, but manufacturing availability and distributor inventory should not be assumed without a current quotation.

Data referensi engineering untuk LM2903VQDR — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the LM2903VQDR when the design needs two differential-comparison channels, open-collector outputs, operation from 2 V to 36 V, and an extended -40°C to +125°C temperature range. The LM2903QDR is the closest same-manufacturer family alternative when the V-enhanced ordering version is unnecessary, but its detailed limits should be reviewed. LM2903BIDR is useful when the B-version grading and its stated 0.37 mV offset and 1 us response time better match the design. For cross-brand sourcing, ROHM LM2903VQDR has the same ordering code and SOIC-8 format, STMicroelectronics LM2903DT offers a stated 1.3 us response time, and 3PEAK LM2903DQ provides an open-drain 8-pin option with the same stated temperature span. In every case, verify the exact pinout, common-mode input range, output sink current, supply-current behavior, and timing before production substitution.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini LM2903QDR LM2903BIDR LM2903VQDR LM2903DT LM2903DQ
Brand Texas Instruments Texas Instruments Texas Instruments ROHM Semiconductor STMicroelectronics 3PEAK
Package SOIC-8 SOIC-8 SOIC-8 SOIC-8 SOIC-8 SOIC-8
Number of Channels 2 channels 2 channels 2 channels 2 channels 2 channels 2 channels

Diferensiator Kunci

  • Wide 36 V maximum supply rating (vsLM2903DT)
  • Low 0.5 nA input bias current (vsLM2903BIDR)
  • Dual channels in an 8-pin SOIC footprint (vsLM2903DQ)
  • Wide-temperature operation (vsLM2903QDR)

Catatan Desain

Do not treat the open-collector outputs as push-pull logic outputs. Each OUT pin requires a pull-up resistor to the intended logic rail unless it drives a transistor input. Confirm that the available sink current is sufficient and that the pull-up value produces the required output rise time. Also verify that both comparator inputs remain inside the allowable common-mode range at the lowest and highest supply voltages.

Place the output pull-up resistor close to OUT1 or OUT2 to minimize trace capacitance and keep the switching return current short. Route the two input pairs away from relay-coil wiring, switching-power nodes, and high-current return paths. If a precision reference is used, keep its ground connection compact and use a low-value bypass capacitor where compatible with the reference circuit.

Add hysteresis with positive feedback when a slow or noisy signal can cross the threshold repeatedly. The hysteresis voltage adds directly to the switching point, so select the resistor values from the intended noise margin rather than using a generic value. Also account for comparator offset and input error when setting upper and lower detection limits.

The dual device is specified at 0.8 mA supply current, but total system consumption also includes the pull-up network, reference circuit, and external driver. Use the lowest pull-up resistance that still satisfies output sink-current and timing requirements. For battery-powered operation, calculate standby current at the highest anticipated temperature because device consumption can vary with supply voltage and temperature.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

No explicit compliance declaration for LM2903VQDR was identified. Confirm current material and environmental compliance documentation with the manufacturer before production release.

Pencarian Terkait

LM2903VQDR datasheet LM2903VQDR pinout LM2903VQDR datasheet pdf Texas Instruments LM2903VQDR LM2903VQDR equivalent LM2903VQDR replacement LM2903VQDR cross reference LM2903VQDR vs LM2903DT LM2903VQDR price LM2903VQDR stock LM2903VQDR SOIC-8 comparator LM2903VQDR industrial sensor threshold

Komponen dan Istilah Terkait

Texas Instruments LM2903VQDR LM2903QDR LM2903BIDR ROHM Semiconductor STMicroelectronics 3PEAK LM2903DT LM2903DQ dual differential comparator voltage comparator analog comparator semiconductor open-collector output open-drain output SOIC-8 SOIC package family surface-mount device input bias current supply current offset voltage common-mode input range industrial threshold detection battery-powered monitoring relay interfacing
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ