STMicroelectronics

LM2903YST - Dual 36V Low-Power Comparator | STMicroelectronics

MPN: LM2903YST ✓ Aktif
+2 V to +36 V Vdss 0.4 mA typical, independent of supply voltage Id 8-pin MiniSO/TSSOP Package
MOQ: 1 |

LM2903YST Ringkasan

The STMicroelectronics LM2903YST is a dual low-power voltage comparator with two independent open-collector outputs, a 2 V to 36 V single-supply range, and support for dual supplies from ±1 V to ±18 V. The device is packaged in an 8-pin MiniSO/TSSOP package and is intended for low-voltage, low-power signal conditioning, threshold detection, and industrial control applications.

A voltage comparator is an analog integrated circuit that compares an input voltage with a reference voltage and changes its output state according to the polarity of the difference. The LM2903 contains two independent comparator channels. Within the broader semiconductor hierarchy, it is an analog comparator, an interface IC, and a signal-conditioning device commonly used between sensors, switching circuits, and digital control logic.

Key features include a supply current of 0.4 mA that remains independent of supply voltage, low input bias current of 25 nA typical, and low input offset current of ±5 nA typical. The open-collector outputs permit wired-AND connections and require an external pull-up resistor. A typical propagation delay of 1.3 µs supports threshold and switching functions, while the wide supply range accommodates industrial and automotive-style supply conditions.

Each comparator has its own non-inverting input, inverting input, and open-collector output. The channels share the supply and ground pins but remain electrically independent for signal comparison. Operation from a single supply or split dual supplies gives designers flexibility when working with bipolar sensor signals, positive-only rails, or systems whose input range extends close to ground.

Typical uses include sensor threshold detection, battery and power-supply monitoring, industrial control interfaces, automotive signal conditioning, window or level comparisons, and general-purpose logic qualification. The low 0.4 mA supply-current characteristic is particularly useful in continuously powered equipment where every increment of standby current affects system architecture.

Designers should account for the open-collector output when selecting a pull-up resistor and logic supply voltage. Input common-mode limits, output saturation behavior, and the 1.3 µs response time must also be checked against the propagation delay allowed by the surrounding system. The manufacturer datasheet provides the authoritative pin assignments, electrical limits, and test conditions.

This page combines operating limits, package details, comparison data, replacement guidance, and practical design notes to support component selection, schematic review, PCB implementation, and sourcing for the LM2903YST.

Alternatif penggantian untuk LM2903YST — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

LM2903DT

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 TSSOP-8 (MiniSO)
Same LM2903 dual-comparator architecture and TSSOP-8 footprint; temperature-grade and ordering-code conditions differ by approximately 0 °C to 125 °C.

📋 Alternatif referensi (tidak dalam katalog)

LM2903YD

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 TSSOP-8 (MiniSO)
Same LM2903 dual-comparator architecture and TSSOP-8 footprint; automotive qualification and ordering-code conditions differ by up to 15 °C of temperature-range coverage.

📋 Alternatif referensi (tidak dalam katalog)

LM2903PWR

✅ Drop-In
Texas Instruments
📦 TSSOP-8 (MiniSO)
Dual differential comparator · 2 channels · Open-collector · Rail-to-rail · ±18V / 36V total · Up to 38V · 0.37mV maximum · 3.5nA maximum

Kontak untuk harga

Lihat Datasheet →

LM2903YST Rating Maksimal & Karakteristik Listrik

Comparator Type 2 independent differential voltage comparators
Number of Channels 2 channels
Single Supply Voltage Range +2 V to +36 V
Dual Supply Voltage Range ±1 V to ±18 V
Arus Pemuat 0.4 mA typical, independent of supply voltage
Comparator Power at 5 V 1 mW per comparator
Input Bias Current 25 nA typical
Input Offset Current ±5 nA typical
Propagation Delay 1.3 µs typical
Tipe Output Open-collector
Common-Mode Input Range Includes ground
Rentang Suhu Kerja -40 °C to +125 °C
Automotive Qualification AEC-Q100
Paket 8-pin MiniSO/TSSOP
Tipe Mounting Surface mount

Konfigurasi Pin LM2903YST

TSSOP-8 Package Pinout Diagram TSSOP-8 8-pin thin shrink small outline, P0.65mm, JEDEC MO-153. 1 8 2 7 3 6 4 5 TSSOP-8
Pin produk 1 OUT1 — Comparator 1 open-collector output
Pin produk 2 IN1- — Comparator 1 inverting input
Pin produk 3 IN1+ — Comparator 1 non-inverting input
Pin produk 4 GND — Ground connection
Pin produk 5 IN2+ — Comparator 2 non-inverting input
Pin produk 6 IN2- — Comparator 2 inverting input
Pin produk 7 OUT2 — Comparator 2 open-collector output
Pin produk 8 VCC — Positive supply connection

Aplikasi Umum

LM2903YST cocok untuk 6 aplikasis: Industrial Sensor Threshold Detection, Battery and Power-Supply Monitoring, Automotive Signal Conditioning, Window and Level Comparators, Control-System Logic Interface, Portable and Low-Power Monitoring.

🏭

Industrial Sensor Threshold Detection

The LM2903YST fits industrial sensor interfaces that convert an analog measurement into a digital switching event. Each independent comparator can compare a sensor signal against a reference, while the 25 nA typical input bias current limits disturbance of high-impedance sensing paths. Its 2 V to 36 V single-supply range supports operation from low-voltage sensor rails through higher industrial supply levels. The 1.3 µs typical propagation delay is suitable for general threshold and alarm functions. Because the outputs are open collector, pull-up resistors can establish the logic voltage independently, allowing the comparator channels to drive a different logic domain from the analog supply when the interface permits it.

⚡

Battery and Power-Supply Monitoring

The LM2903YST can supervise a battery-backed rail or supply node by comparing its voltage with a reference threshold and producing an open-collector status indication. The 2 V to 36 V operating range accommodates multiple battery and industrial supply arrangements, while 0.4 mA typical supply current reduces continuous monitoring overhead. Two independent channels allow simultaneous supervision of a main rail and a backup or auxiliary rail. The pull-up resistor on each output defines the status-logic voltage, and the 1.3 µs typical response allows rapid reaction to threshold crossings. Designers should confirm the precise common-mode limits before sensing near the negative rail under dual-supply operation.

🚗

Automotive Signal Conditioning

The LM2903YST is suitable for automotive threshold and signal-conditioning circuits requiring a dual comparator, broad supply range, and qualified temperature behavior. AEC-Q100 qualification and operation from -40 °C to +125 °C distinguish it from generic consumer-grade alternatives. The two channels can independently monitor different inputs, including sensor signals, switch states, or supply-derived thresholds. Open-collector outputs provide flexible wired-AND arrangements and selectable pull-up voltages, but the external pull-up network must preserve adequate rise time in the connected logic circuit. Designers should review input protection and transient requirements separately from the comparator's static operating limits.

🔧

Window and Level Comparators

The LM2903YST is well suited to window-limit and level-detection functions because it provides two independent channels with complementary input connections for each comparison. For example, one channel can detect a signal crossing an upper reference while the other detects a lower boundary. The 25 nA typical input bias current is beneficial when the monitored voltage comes from a high-impedance divider, and the 0.4 mA typical supply current supports low-power monitoring. Open-collector outputs allow both channels to be pulled up to a common logic rail or combined for a wired-AND fault indication. Timing components should be placed so the circuit remains stable around the switching threshold.

⚙️

Control-System Logic Interface

The LM2903YST can bridge slowly varying or noisy analog control signals to digital logic in industrial equipment. One comparator channel may translate a feedback voltage into a logic state, while the second supports an auxiliary limit or alarm function. Its low 0.4 mA typical supply current is advantageous in systems that remain powered continuously. The open-collector output can sink the required logic current and requires an external pull-up, which lets the output voltage be matched to the receiving circuit. Engineers should verify output sink-current limits, pull-up resistance, and the resulting RC rise time before using it with high-speed buses or heavily capacitive nodes.

📱

Portable and Low-Power Monitoring

The LM2903YST supports compact, continuously powered monitoring systems because its supply current is 0.4 mA typical and remains independent of supply voltage. It can monitor charger status, battery transitions, or a divided system rail while the two channels provide independent decisions. The 2 V minimum single-supply voltage is useful in low-energy designs, and the 36 V maximum expands applicability to higher-voltage systems. Open-collector outputs reduce the number of required logic rails because an external resistor can connect them to the host's appropriate pull-up voltage. Leakage through the pull-up network should be included in the complete power budget because it adds to the comparator's 0.4 mA consumption.

Ringkasan Produk Direkomendasikan

LM2903 Dual comparator family for single or dual-supply sensing Digunakan di dalam: Industrial Sensor Threshold Detection, Battery and Power-Supply Monitoring, Automotive Signal Conditioning, Portable and Low-Power Monitoring LM2903B Comparator family option for reviewed drop-in designs Digunakan di dalam: Industrial Sensor Threshold Detection, Window and Level Comparators LM2903PWR Texas Instruments Digunakan di dalam: Battery and Power-Supply Monitoring LM2903AVQDR Texas Instruments Digunakan di dalam: Automotive Signal Conditioning LM2903DT Same-brand TSSOP-8 family variant Digunakan di dalam: Window and Level Comparators LM2903PWRG4 Texas Instruments Digunakan di dalam: Control-System Logic Interface LM2903N/NOPB Texas Instruments Digunakan di dalam: Control-System Logic Interface LM2903YD Same-brand LM2903 TSSOP-8 family option Digunakan di dalam: Portable and Low-Power Monitoring
What is the operating voltage of LM2903YST?
The LM2903YST operates from 2 V to 36 V on a single supply or from ±1 V to ±18 V on dual supplies. According to the STMicroelectronics manufacturer datasheet, the two independent comparator channels share the supply pins and can therefore evaluate two input pairs without requiring separate amplifier ICs.
Where to download the LM2903YST datasheet PDF?
Download the LM2903YST datasheet PDF from STMicroelectronics at https://www.st.com/resource/en/datasheet/lm2903.pdf. The manufacturer datasheet contains the complete 8-pin MiniSO/TSSOP pin assignment, recommended operating conditions, electrical characteristics, application information, and ordering information for the LM2903YST.
Where can I find the LM2903YST pinout?
The LM2903YST uses an 8-pin MiniSO/TSSOP arrangement with pins 1 through 8 assigned to OUT1, IN1−, IN1+, GND, IN2+, IN2−, OUT2, and VCC. Use the manufacturer pin-description table when assigning PCB tracks because the two open-collector outputs require external pull-up components.
What are the key specifications of LM2903YST that engineers should know?
The LM2903YST is a dual open-collector comparator rated for 2 V to 36 V single-supply operation, with 0.4 mA typical supply current, 25 nA typical input bias current, and approximately 1.3 µs typical propagation delay. According to the STMicroelectronics manufacturer datasheet, each channel provides independent inputs and an open-collector output in an 8-pin MiniSO/TSSOP package.
Where to buy LM2903YST online?
Use the Request a Quote form on this page to request LM2903YST availability, current commercial terms, and suitable order quantities. The part is an 8-pin MiniSO/TSSOP dual comparator, so confirm the package code, tape-and-reel requirements, and the quantity needed when submitting the request.
What is the price of LM2903YST?
Use the Request a Quote form on this page for the current LM2903YST price because commercial pricing can vary with quantity, packaging, and market conditions. The request should specify the required order quantity and whether the shipment must use tape-and-reel production packaging.
What is the lead time for LM2903YST?
The current lead time for LM2903YST should be confirmed through the Request a Quote form on this page. When requesting a quotation, identify the required quantity, 8-pin MiniSO/TSSOP packaging, and any automotive production requirements so the supplier can confirm the appropriate schedule.
Is LM2903YST in stock?
Confirm current LM2903YST inventory through the Request a Quote form on this page. Inventory status can vary by package, order quantity, and market conditions, so a quotation request provides the most direct way to establish availability for the production quantity.
LM2903YST vs LM2903PWR - which is better for an 8-pin TSSOP design?
The LM2903PWR is the relevant TSSOP-8 alternative when its manufacturer-specific ordering, grade, and qualification conditions meet the design requirements. The STMicroelectronics LM2903YST operates across 2 V to 36 V with approximately 1.3 µs propagation delay and AEC-Q100 qualification, so it remains the stronger choice when that automotive grade is required.
What is the difference between LM2903YST and LM2903PWR?
Both devices occupy the 8-pin TSSOP class and implement the LM2903 dual-comparator architecture, but their manufacturers, ordering codes, qualification grades, and exact electrical limits must be checked separately. The LM2903YST is specified by STMicroelectronics for -40 °C to +125 °C operation and AEC-Q100 qualification.
When should I choose LM2903YST over LM2903PWR?
Choose the LM2903YST when the design benefits from its STMicroelectronics dual comparator, -40 °C to +125 °C operating range, and AEC-Q100 qualification. Compare the LM2903PWR datasheet for exact offset, response, common-mode, and output-current limits before approving a substitution for production.
What can replace LM2903YST?
The LM2903PWR is the principal identified 8-pin TSSOP-class drop-in candidate, but it is a cross-manufacturer alternative and requires parameter verification. A valid replacement must preserve pin assignments, the 2 V to 36 V supply capability, differential input arrangement, open-collector outputs, and required temperature qualification.
Is LM2903YST suitable for automotive applications?
Yes, the LM2903YST is identified as AEC-Q100 qualified and is rated for -40 °C to +125 °C operation. According to the STMicroelectronics manufacturer datasheet, its dual open-collector architecture supports threshold detection and signal-conditioning functions across automotive temperature conditions.
How much supply current does LM2903YST consume?
The LM2903YST consumes 0.4 mA typical, independent of the supply voltage, equivalent to about 1 mW per comparator at 5 V. This low current is a principal advantage for continuously powered monitoring and industrial equipment compared with higher-power comparator families.
What is the best Texas Instruments equivalent for LM2903YST?
The Texas Instruments LM2903PWR is the closest identified 8-pin TSSOP-class equivalent because it uses the same dual differential comparator architecture and open-collector output style. Verify pinout, common-mode range, offset, propagation delay, and qualification on the TI datasheet before treating it as a production replacement.

Data referensi engineering untuk LM2903YST — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the LM2903YST for an 8-pin MiniSO/TSSOP design that needs two independent open-collector comparators, a 2 V to 36 V operating range, and an automotive-qualified -40 °C to +125 °C grade. Choose LM2903YD when the LM2903 family and TSSOP-8 footprint are required but the exact ordering and qualification conditions better match the intended program. Choose LM2903DT for a non-automotive LM2903-family implementation after checking its temperature rating. Consider LM2903PWR as a cross-manufacturer TSSOP-8 alternative, but compare its pinout, input offset, common-mode limits, propagation delay, output current, and qualification against the LM2903YST datasheet. No candidate should be approved solely from the package name; production substitution requires verification of electrical limits and environmental requirements.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini LM2903DT LM2903YD LM2903PWR
Brand STMicroelectronics STMicroelectronics STMicroelectronics Texas Instruments
Package 8-pin MiniSO/TSSOP 8-pin MiniSO/TSSOP 8-pin MiniSO/TSSOP 8-pin MiniSO/TSSOP
Comparator Channels 2 independent channels 2 independent channels 2 independent channels 2 independent channels
Output Type Open-collector Open-collector Open-collector Open-collector
Single-Supply Range 2 V to 36 V 2 V to 36 V 2 V to 36 V 2 V to 36 V
Dual-Supply Range ±1 V to ±18 V ±1 V to ±18 V ±1 V to ±18 V ±1 V to ±18 V

Diferensiator Kunci

  • Combines dual comparators with automotive qualification (vsLM2903PWR)
  • Wide operating supply supports industrial and battery-related rails (vsLM2903DT)
  • Low supply current independent of supply voltage (vsLM2903YD)

Catatan Desain

Do not treat the open-collector outputs as actively driven logic outputs. Connect a suitable pull-up resistor from each OUT pin to the intended logic supply, and verify that the output voltage at the maximum sink current and temperature remains compatible with the receiving device. If both outputs are tied together for a wired-AND function, ensure that the pull-up network can support the combined sink current.

Choose the pull-up resistor to balance low power consumption against rise time. Estimated: with a 10 kΩ pull-up and 100 pF total node capacitance, the RC time constant is 1 µs and the 10% to 90% rise time is approximately 2.2 µs. Confirm that this transition is acceptable for the connected logic and add hysteresis where noise near the threshold could cause repeated switching.

The LM2903YST has a 2 V minimum single-supply voltage, but the input common-mode range and output behavior must also be valid at the chosen rail. For dual-supply operation, keep the total supply span within the ±1 V to ±18 V range and avoid forcing either input outside its specified common-mode limits. Review input bias-current error when sensing through a high-value divider.

Place input traces away from switching nodes and route the two comparator channels to minimize shared pickup. Keep the ground connection short and provide a solid ground reference beneath the device where layout permits. External pull-up resistors should be positioned close to the corresponding output pins, while input-divider components should be placed close to the input nodes to reduce leakage and capacitance effects.

Confirm the exact ordering code before approving a board because temperature grade, qualification, package, and shipping form are encoded in the MPN. The LM2903YST is an automotive-qualified 8-pin MiniSO/TSSOP device; do not substitute a DIP-8 or SOIC-8 variant solely because the comparator functions are similar. A mechanical footprint mismatch requires PCB changes.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

AEC-Q100 qualification is stated in the manufacturer datasheet. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer product or material declaration.

Pencarian Terkait

LM2903YST datasheet LM2903YST pinout LM2903YST datasheet pdf LM2903YST equivalent LM2903YST replacement LM2903YST vs LM2903PWR LM2903YST TSSOP-8 LM2903YST 36V comparator LM2903YST open collector output LM2903YST automotive comparator LM2903YST sensor threshold STMicroelectronics LM2903YST LM2903YST price LM2903YST stock LM2903YST cross reference

Komponen dan Istilah Terkait

STMicroelectronics LM2903YST LM2903DT LM2903YD LM2903PWR LM2903 LM2903B dual voltage comparator differential comparator open-collector output low-dropout voltage input bias current input offset current common-mode input range propagation delay MiniSO TSSOP-8 surface-mount package AEC-Q100 industrial sensor interface automotive signal conditioning power-supply monitoring semiconductor analog integrated circuit
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ