Texas Instruments

LM2904AVQPWRG4Q1 - Dual 26V 700kHz AEC-Q100 Op Amp | TI

MPN: LM2904AVQPWRG4Q1 ✓ Aktif
26 V Vdss 0.7 mA Id 8-pin TSSOP (PW) Package
MOQ: 1 |

LM2904AVQPWRG4Q1 Ringkasan

The Texas Instruments LM2904AVQPWRG4Q1 is a dual, general-purpose operational amplifier with a 26 V maximum supply rating, 700 kHz gain-bandwidth product, and AEC-Q100 automotive qualification. The device is offered in an 8-pin TSSOP package and supports single-supply or dual-supply operation, making it suitable for automotive, industrial, and low-cost analog signal-conditioning circuits.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. The dual configuration provides two independent amplifiers in one package, which saves board area in applications such as sensing, filtering, buffering, and control loops. Within the device hierarchy, this part belongs to the operational amplifier family of amplifier ICs, combining wide supply-voltage tolerance with low supply-current consumption.

Key characteristics include a 700 kHz gain-bandwidth product, an input common-mode range that includes ground, and a low typical supply-current drain of 0.7 mA. The common-mode capability supports direct sensing near ground in battery-powered and sensor-interface circuits. Single-supply operation is possible because the common-mode input range reaches the negative supply rail, while the 26 V rating supports higher-voltage industrial control systems.

The LM2904 architecture uses frequency compensation to provide stable closed-loop operation in typical amplifier configurations. Its wide supply range and low supply-current drain suit applications that need adequate signal headroom without continuous high quiescent power. Automotive qualification is provided under AEC-Q100 specifications for the LM2904-Q1 family.

Typical uses include 12 V automotive sensor conditioning, low-side current measurement, transducer amplification, active filtering, and general-purpose analog control. The TSSOP-8 outline also supports compact mixed-signal boards where a dual amplifier is needed rather than two separate single-channel devices.

Design with adequate supply decoupling, confirm the input common-mode and output-swing limits against the actual signal range, and check the maximum total supply voltage before applying power. This page also organizes pinout, packaging, qualification, drop-in alternatives, and application guidance for faster component selection.

Alternatif penggantian untuk LM2904AVQPWRG4Q1 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

LM2904AVQPWRG4

✅ Drop-In
Texas Instruments
📦 8-pin TSSOP (PW)
Dual general-purpose operational amplifier · 2 channels · 700 kHz · 26 V · 13 V for dual supplies · 0.7 mA typical · Includes ground · 4 inputs

Kontak untuk harga

Lihat Datasheet →

LM2904B QPWRQ1

✅ Drop-In
📦 8-pin TSSOP (PW)
Maximum supply rating increases from 26 V to 36 V (+38%) and gain-bandwidth product increases from 700 kHz to 1.2 MHz (+71%), while retaining a dual 8-pin TSSOP arrangement

📋 Alternatif referensi (tidak dalam katalog)

LM2904AVQPWRG4Q1 Rating Maksimal & Karakteristik Listrik

Number of Amplifiers 2
Amplifier Type Standard general-purpose operational amplifier
Maximum Supply Voltage 26 V
Gain-Bandwidth Product 700 kHz
Typical Supply-Current Drain 0.7 mA
Input Common-Mode Range Includes ground
Supply Configuration Single or dual supply
Automotive Qualification AEC-Q100 qualified
Paket 8-pin TSSOP (PW)
Tipe Mounting Surface mount

Konfigurasi Pin LM2904AVQPWRG4Q1

TSSOP-8 Package Pinout Diagram TSSOP-8 8-pin thin shrink small outline, P0.65mm, JEDEC MO-153. 1 8 2 7 3 6 4 5 TSSOP-8
Pin produk 1 OUTA — Amplifier A output
Pin produk 2 INA- — Amplifier A inverting input
Pin produk 3 INA+ — Amplifier A non-inverting input
Pin produk 4 V- — Negative supply connection
Pin produk 5 INB+ — Amplifier B non-inverting input
Pin produk 6 INB- — Amplifier B inverting input
Pin produk 7 OUTB — Amplifier B output
Pin produk 8 V+ — Positive supply connection

Aplikasi Umum

LM2904AVQPWRG4Q1 cocok untuk 6 aplikasis: Automotive Sensor Signal Conditioning, Low-Side Current Measurement, Active Low-Pass Filtering, Transducer Amplification, Battery-Powered Monitoring, Industrial Control Analog Front End.

🚗

Automotive Sensor Signal Conditioning

The LM2904AVQPWRG4Q1 fits 12 V automotive sensor interfaces because it combines a 26 V supply rating with AEC-Q100 qualification and a 700 kHz gain-bandwidth product. Place one channel in a non-inverting amplifier configuration and use the second channel for filtering or an active transducer driver. The input common-mode range includes ground, which helps when the sensor output rests near 0 V. Decoupling capacitors should be placed close to pins 4 and 8, and input and feedback resistors should be chosen to keep the closed-loop bandwidth well below 700 kHz.

⚡

Low-Side Current Measurement

A shunt amplifier for a low-side current sensor can use the LM2904AVQPWRG4Q1's two amplifiers to create a differential measurement stage. The first channel senses the shunt voltage and the second provides filtering or an additional gain stage. Its 700 kHz gain-bandwidth product supports measurement bandwidths in the audio-to-low-kilohertz range, while the 0.7 mA typical supply-current drain limits quiescent loading. Maintain common-mode and output-swing headroom, and place the shunt Kelvin connections away from high-current switching nodes to reduce pickup.

🔧

Active Low-Pass Filtering

The LM2904AVQPWRG4Q1 is suitable for first- or second-order active filters where moderate bandwidth, low supply-current drain, and ground-referenced input capability are important. Each amplifier channel can implement a Sallen-Key or inverting active-filter section with external resistors and capacitors. The 700 kHz gain-bandwidth product leaves headroom above typical audio or sensor-conditioning filter cutoffs. Keep resistor values high enough to limit noise and load effects, but low enough to avoid excessive capacitive loading on the amplifier output.

🌡️

Transducer Amplification

The dual LM2904AVQPWRG4Q1 can condition resistive-bridge, strain-gauge, or resistive temperature-sensor outputs when the excitation and signal levels fit the amplifier's common-mode range. A bridge output can be amplified by one channel while the other channel buffers the reference or drives a guard path. Because the input common-mode range includes ground, unipolar sensor outputs can be measured without a separate bias-supply arrangement. Select feedback resistors for the required gain and verify offset, bias-current, and common-mode accuracy against the temperature range of the final design.

🔋

Battery-Powered Monitoring

The LM2904AVQPWRG4Q1 works well in battery-powered monitors because its typical supply-current drain is 0.7 mA and its common-mode input range includes ground. One channel can monitor a cell voltage while the other amplifies a sensor or comparator signal. A single-supply configuration simplifies the power tree, although the output-swing limits must be observed at light load. Use low-leakage input biasing and protection components when long battery life is more important than wide input bandwidth.

🏭

Industrial Control Analog Front End

The LM2904AVQPWRG4Q1 can serve as a general-purpose analog front end in industrial controllers with 12 V or 24 V signal rails. The 26 V supply rating provides headroom for transient-tolerant systems, and the dual configuration handles both sensing and feedback functions. Use amplifier A for the error amplifier and amplifier B for a filter or auxiliary buffer. Keep supply wiring compact, provide local bypass capacitance, and route high-energy switching nodes separately from the high-impedance input nodes to minimize differential noise pickup.

Ringkasan Produk Direkomendasikan

What is the LM2904AVQPWRG4Q1?
The LM2904AVQPWRG4Q1 is a dual general-purpose operational amplifier from Texas Instruments, specified for 26 V operation with a 700 kHz gain-bandwidth product in an 8-pin TSSOP package. According to the Texas Instruments LM2904-Q1 datasheet, the device is qualified to AEC-Q100 automotive specifications and supports single- or dual-supply operation for general-purpose analog signal conditioning.
Is the LM2904AVQPWRG4Q1 suitable for automotive applications?
Yes, the LM2904AVQPWRG4Q1 is an automotive-qualified member of the Texas Instruments LM2904-Q1 family. The manufacturer states that the LM2904-Q1 devices are qualified for automotive use in accordance with AEC-Q100 specifications. This qualification makes the part suitable for vehicle sensor interfaces and other 12 V automotive electronics requiring a dual, general-purpose amplifier in an 8-pin TSSOP.
What is the gain-bandwidth product of the LM2904AVQPWRG4Q1?
The LM2904AVQPWRG4Q1 has a gain-bandwidth product of 700 kHz. According to the Texas Instruments LM2904 product information, the amplifier is a dual, 26 V, 700 kHz operational amplifier. This bandwidth supports general-purpose closed-loop amplifier configurations at moderate frequencies, while applications requiring substantially more signal bandwidth should use a higher-speed amplifier family.
Where can I download the LM2904AVQPWRG4Q1 datasheet PDF?
The LM2904AVQPWRG4Q1 datasheet can be obtained from the Texas Instruments LM2904-Q1 product page for this exact orderable part. The device appears in the family document covering the LM2904-Q1, LM2904B-Q1, and LM2904BA-Q1 automotive dual operational amplifiers. Use the pin-description table, electrical-characteristics table, and recommended operating conditions from that document during design verification.
Where can I find the LM2904AVQPWRG4Q1 pinout?
The LM2904AVQPWRG4Q1 pinout is defined in the Texas Instruments LM2904-Q1 datasheet and follows the standard 8-pin TSSOP dual-amplifier arrangement. Pins 1, 2, and 3 belong to amplifier A, pins 5, 6, and 7 belong to amplifier B, and pins 4 and 8 provide the supply connections. Verify the physical package orientation and pin-1 marking against the manufacturer diagram before laying out the PCB.
Can the LM2904AVQPWRG4Q1 operate from a single 5 V supply?
The LM2904AVQPWRG4Q1 supports single-supply operation, and its input common-mode range includes ground. This permits direct sensing of signals near the negative supply rail, which is useful in battery-powered and unipolar sensor systems. The output must still remain inside the output-swing limits, and the operating voltage must comply with the electrical-characteristics conditions in the manufacturer datasheet.
What is the supply-current drain of the LM2904AVQPWRG4Q1?
The LM2904AVQPWRG4Q1 has a typical supply-current drain of 0.7 mA. According to the LM2904-Q1 datasheet description, the low supply-current drain remains independent of supply voltage. This characteristic is useful when the amplifier operates continuously in low-power automotive, industrial monitoring, or remote-sensing systems where total quiescent current affects battery life and thermal rise.
What is the difference between the LM2904AVQPWRG4Q1 and LM2904B-Q1?
The LM2904B-Q1 is the next-generation 36 V, 1.2 MHz version of the automotive LM2904 family, while the LM2904AVQPWRG4Q1 is the 26 V, 700 kHz original LM2904-Q1 version. Both belong to Texas Instruments' automotive-qualified dual-operational-amplifier portfolio, but the LM2904B-Q1 provides higher voltage capability and approximately 71% more gain-bandwidth product than the LM2904AVQPWRG4Q1.
When should I choose the LM2904AVQPWRG4Q1 over the LM2904B-Q1?
Choose the LM2904AVQPWRG4Q1 when a mature 26 V, 700 kHz dual amplifier is sufficient and you want the established LM2904-Q1 automotive family. Choose the LM2904B-Q1 instead when the design needs its 36 V rating, 1.2 MHz gain-bandwidth product, or newer performance. Both families serve general-purpose analog applications, so the required signal bandwidth and supply headroom determine the choice.
What can replace the LM2904AVQPWRG4Q1?
The closest same-family replacement is the non-automotive-orderable LM2904 variant identified as LM2904AVQPWRG4, which retains the LM2904-Q1 electrical function but is not the automotive-qualified Q1 orderable. The LM2904B-Q1 is an automotive alternative with a 36 V rating and 1.2 MHz bandwidth, but it is not a parameter-for-parameter substitute. Request a quote on this page for the exact orderable configuration.
What is the best drop-in replacement for the LM2904AVQPWRG4Q1?
The best confirmed drop-in option is the LM2904AVQPWRG4 because it retains the LM2904-Q1 family function and the same 8-pin TSSOP land pattern. The primary engineering difference is automotive qualification: LM2904AVQPWRG4Q1 is AEC-Q100 qualified, while the non-Q1 orderable is intended for standard applications. Confirm temperature limits, qualification requirements, and production availability before substitution.
Where can I buy the LM2904AVQPWRG4Q1 online?
Use the Request a Quote form on this page to ask for the LM2904AVQPWRG4Q1, including the 8-pin TSSOP package and automotive qualification requirements. XAIPART can confirm current source availability, order quantity, and lead time against the requested configuration. The Texas Instruments part-details page confirms the exact orderable MPN and provides the authoritative device documentation.
How much does the LM2904AVQPWRG4Q1 cost?
Current commercial pricing for the LM2904AVQPWRG4Q1 is handled through the Request a Quote form on this page. Submit the required quantity, package, and automotive-qualification details to obtain a current quotation. Prices can vary with volume, sourcing condition, and market availability, so a live quote is more reliable than a static listing figure.
Is the LM2904AVQPWRG4Q1 in stock and what is its lead time?
Stock status and current lead time should be confirmed through the Request a Quote form on this page. The Texas Instruments part-details page identifies the LM2904AVQPWRG4Q1 as an orderable configuration, while real-time allocation can change by date and quantity. Include your required delivery schedule so the quote can reflect the appropriate supply position.
What are the key specifications of LM2904AVQPWRG4Q1 that engineers should know?
The LM2904AVQPWRG4Q1 is a dual 26 V, 700 kHz general-purpose operational amplifier with a 0.7 mA typical supply-current drain. Its input common-mode range includes ground, and the family supports single- or dual-supply operation. The part is AEC-Q100 qualified and offered in an 8-pin TSSOP package, making it a standard choice for automotive sensor conditioning and low-power analog interfaces.
Is the LM2904AVQPWRG4Q1 the same as an LM2904AQTH-13?
No. The LM2904AQTH-13 and the LM2904AVQPWRG4Q1 are different package configurations of the automotive LM2904 family, so the land patterns are not interchangeable. The LM2904AVQPWRG4Q1 uses an 8-pin TSSOP package, whereas the AQTH order code identifies a different package option. Verify the manufacturer pinout and package drawing before considering any substitution.

Data referensi engineering untuk LM2904AVQPWRG4Q1 — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the LM2904AVQPWRG4Q1 for 12 V or 24 V automotive and industrial analog circuits that require a mature dual amplifier, AEC-Q100 qualification, a 26 V supply rating, and approximately 700 kHz bandwidth. Choose LM2904AVQPWRG4 when the board does not require automotive qualification and a standard-grade LM2904-Q1 configuration is acceptable. Choose LM2904B QPWRQ1 when the design benefits from a 36 V rating, 1.2 MHz bandwidth, or the newer LM2904B-Q1 feature set. Confirm that the package land pattern, temperature grade, qualification requirements, output-swing conditions, and common-mode range satisfy the application before releasing a production BOM.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini LM2904AVQPWRG4 LM2904B QPWRQ1
Brand Texas Instruments Texas Instruments Texas Instruments
Package 8-pin TSSOP (PW) 8-pin TSSOP (PW) 8-pin TSSOP (PW)
Number of Amplifiers 2 2 2
Maximum Supply Voltage 26 V 26 V 36 V
Gain-Bandwidth Product 700 kHz 700 kHz 1.2 MHz
Automotive Qualification AEC-Q100 qualified Standard grade AEC-Q100 qualified
Supply Configuration Single or dual supply Single or dual supply Single or dual supply

Diferensiator Kunci

  • Automotive qualification within the established LM2904 performance class (vsLM2904AVQPWRG4)
  • Lower-voltage original LM2904-Q1 rating supports established 26 V designs (vsLM2904B QPWRQ1)
  • Dual amplifier in a compact 8-pin TSSOP package (vsLM2904AQTH-13)

Catatan Desain

Place a supply bypass capacitor close to pins 4 and 8 and route the return directly to the device ground or supply-return plane. The typical supply-current drain is 0.7 mA, but the total current also includes output-current demand and input-bias currents. Keep the maximum total supply voltage below 26 V for this device and include protection for automotive transients where the platform requires it.

Keep the two amplifier channels physically separated when one handles a low-level sensor and the other drives a switching or load stage. Use short traces for feedback connections and avoid routing inputs beneath the TSSOP package or parallel to high-current edges. Place input-referenced protection components close to the pins so surge current is diverted before it reaches the amplifier inputs.

Do not assume that an input at ground can produce an output exactly at ground; the output-swing limits still apply. Likewise, the 700 kHz gain-bandwidth product is not the usable closed-loop bandwidth at high gain. Select feedback resistors and capacitors for the required noise, gain, and stability, then verify operation across temperature and supply tolerance using the manufacturer electrical-characteristics table.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

Texas Instruments states that the LM2904-Q1 family is qualified for automotive use in accordance with AEC-Q100 specifications. Other compliance declarations require confirmation on the manufacturer part-details page.

Pencarian Terkait

LM2904AVQPWRG4Q1 LM2904AVQPWRG4Q1 datasheet LM2904AVQPWRG4Q1 datasheet pdf LM2904AVQPWRG4Q1 pinout LM2904AVQPWRG4Q1 equivalent LM2904AVQPWRG4Q1 replacement LM2904AVQPWRG4Q1 TSSOP-8 LM2904AVQPWRG4Q1 automotive op amp LM2904AVQPWRG4Q1 vs LM2904B-Q1 Texas Instruments LM2904AVQPWRG4Q1 LM2904 dual 26V 700kHz amplifier LM2904 TSSOP-8 pinout LM2904 automotive sensor conditioning LM2904AVQPWRG4Q1 price LM2904AVQPWRG4Q1 stock

Komponen dan Istilah Terkait

Texas Instruments LM2904AVQPWRG4Q1 LM2904AVQPWRG4 LM2904B QPWRQ1 LM2904AQTH-13 LM2904YPT operational amplifier dual operational amplifier general-purpose amplifier analog integrated circuit amplifier IC AEC-Q100 RoHS REACH TSSOP-8 surface mount SMD package gain-bandwidth product common-mode input voltage range supply-current drain single-supply operation automotive electronics sensor signal conditioning active filter
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ