Texas Instruments

LM2904VQDRG4 - Dual 30V 700kHz Op Amp | Texas Instruments

MPN: LM2904VQDRG4 ✓ Aktif
30 V Vdss 500 µA per channel Id 8-pin SOIC (D) Package
MOQ: 1 |

LM2904VQDRG4 Ringkasan

Texas Instruments LM2904VQDRG4 is a dual general-purpose operational amplifier with a 30 V maximum supply rating, 700 kHz gain-bandwidth product, and low quiescent current of 500 µA per channel. The device is packaged in an 8-pin SOIC (D) package and operates from -40°C to 125°C. Two independent amplifiers in one package support signal conditioning, current sensing, voltage buffering, and general feedback-control circuits.

An operational amplifier, or op amp, is a high-gain differential amplifier whose external feedback network determines its closed-loop behavior. A dual op amp combines two amplifiers in one package, reducing board area when a circuit needs two related analog functions. Within the broader semiconductor hierarchy, an op amp is an analog integrated circuit used for linear amplification, filtering, comparison, and feedback control.

The LM2904VQDRG4 is intended for general-purpose applications rather than precision or high-speed signal chains. Its 700 kHz gain-bandwidth product is suitable for low-to-moderate bandwidth amplification, while the 30 V supply rating allows operation from single or dual supplies. A 500 µA per-channel quiescent current helps limit power consumption in battery-operated and low-power equipment. The broad -40°C to 125°C operating range supports industrial and automotive environments.

Each channel can be configured as an inverting amplifier, non-inverting amplifier, voltage follower, comparator, or active-filter building block. Common-mode and output-drive behavior must be checked against the specific operating point because the LM2904V trades precision and bandwidth for wide supply-voltage tolerance and low quiescent current. The dual configuration is particularly useful when a board requires gain in one signal path and buffering or active filtering in another.

Typical uses include transducer-signal conditioning, 4-20 mA current-loop receivers, low-side current sensing, sensor amplification, power-supply feedback, audio preamplification, and industrial control loops. The device is also suitable for battery-powered instrumentation because its low quiescent current reduces the supply burden when both channels are not continuously active.

Design layouts should keep input and feedback traces short, place input-biasing resistors close to the amplifier pins, and avoid routing high-current switching paths beneath the SOIC footprint. Decoupling capacitors should be connected with minimal loop area, and unused amplifier channels should be configured according to the Texas Instruments datasheet rather than left open. Verify input and output swing, common-mode range, output-current capability, and stability for every selected feedback network.

This product page combines the Texas Instruments family specifications, exact MPN packaging details, lifecycle-oriented sourcing guidance, and application-focused design guidance. It also highlights the need to distinguish verified drop-in alternatives from electrically similar devices that require different packages or different pin assignments.

Alternatif penggantian untuk LM2904VQDRG4 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian LM2904VQDRG4 (sama faktor bentuk dan footprint) — berbeda di dalam Package, Operating Temperature Range, Automotive Qualification, Input Offset Voltage, Slew Rate.

Texas Instruments
Package: SOIC-8 (D)
Operating Temperature Range: -40 C to +125 C
Input Offset Voltage: 0.5 mV typical / 3 mV maximum
Bandingkan dengan LM2904VQDRG4 →
Texas Instruments
Package: 8-SOIC (D)
Automotive Qualification: AEC-Q100 qualified
Input Offset Voltage: 3 mV maximum
Bandingkan dengan LM2904VQDRG4 →

LM2904VQDRG4Q1

✅ Drop-In
Texas Instruments
📦 8-pin SOIC (D)
General-purpose operational amplifier · 2 circuits · 26 V maximum · 700 kHz · 0.3 V/µs · 3 mV maximum · 500 µA typical · -40°C to 125°C

Kontak untuk harga

Lihat Datasheet →

LM2904BIDR

✅ Drop-In
Texas Instruments
📦 8-pin SOIC (D)
Texas Instruments · Industry-standard dual operational amplifier · 2 (Dual) · 3 V to 36 V · +/-1.5 V to +/-18 V · 1.2 MHz · 0.5 V/us (typical) · 0.5 mV typical / 3 mV maximum

Kontak untuk harga

Lihat Datasheet →

LM2904BA

✅ Drop-In
📦 8-pin SOIC (D)
Later LM2904 family variant with the same dual-amplifier footprint; headline voltage, bandwidth, and temperature differences are limited to 10% or less, with revised precision characteristics to be checked.

📋 Alternatif referensi (tidak dalam katalog)

CA0158AE

✅ Drop-In
📦 8-pin SOIC (D)
Cross-brand dual-amplifier candidate with a conservatively estimated parameter proximity of at least 70%; offset, bias-current, bandwidth, and output-swing differences must be checked before substitution.

📋 Alternatif referensi (tidak dalam katalog)

LM2904VQDRG4 Rating Maksimal & Karakteristik Listrik

Product Type Dual operational amplifier
Number of Amplifier Channels 2 channels
Maximum Supply Voltage 30 V
Single-Supply Operating Range 3 V to 30 V
Dual-Supply Operating Range ±4.5 V to ±15 V
Gain-Bandwidth Product 700 kHz
Arus Memerintah 500 µA per channel
Rentang Suhu Kerja -40°C to 125°C
Paket 8-pin SOIC (D)
Jumlah Pin 8 pins
Tipe Mounting Surface mount
Amplifier Classification General-purpose operational amplifier
Automotive Qualification Qualified variant available as LM2904VQDRG4Q1

Konfigurasi Pin LM2904VQDRG4

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin produk 1 OUTA — Amplifier A output
Pin produk 2 IN A- — Amplifier A inverting input
Pin produk 3 IN A+ — Amplifier A non-inverting input
Pin produk 4 V- — Negative supply connection
Pin produk 5 IN B+ — Amplifier B non-inverting input
Pin produk 6 IN B- — Amplifier B inverting input
Pin produk 7 OUTB — Amplifier B output
Pin produk 8 V+ — Positive supply connection

Aplikasi Umum

LM2904VQDRG4 cocok untuk 6 aplikasis: Industrial Sensor Signal Conditioning, Low-Side Current Sensing, Battery-Powered Instrumentation, Audio Preamplification, Active Filtering and Control Loops, Automotive and Heavy Equipment Control.

🏭

Industrial Sensor Signal Conditioning

The LM2904VQDRG4 is well suited to amplifying weak sensor signals in industrial control equipment because its two channels can handle related gain and filtering functions in one 8-pin SOIC package. The 700 kHz gain-bandwidth product supports low-to-moderate bandwidth signals, while the 30 V maximum supply rating accommodates industrial rails more readily than many low-voltage precision amplifiers. The 500 µA per-channel quiescent current also limits power demand in distributed sensing systems. During design, verify the input common-mode range against the sensor output and confirm output swing at the selected gain before committing the circuit.

⚡

Low-Side Current Sensing

The LM2904VQDRG4 can amplify the voltage produced by a low-value shunt resistor when the common-mode voltage remains within the amplifier's permitted input range. Its 700 kHz gain-bandwidth product is adequate for many current-monitoring loops, and the dual package permits a second channel to support gain, filtering, or offset correction. The wide 3 V to 30 V single-supply range supports control systems operating from higher-voltage rails. Accurate current measurement depends on checking offset voltage, bias current, common-mode limits, and shunt-induced output swing in the final operating point.

📱

Battery-Powered Instrumentation

The LM2904VQDRG4 fits portable measurement and monitoring equipment that needs two general-purpose analog channels without the power demand of a high-speed precision amplifier. Its approximately 500 µA quiescent current per channel is valuable when the amplifier must remain connected to a battery, while the 3 V minimum single-supply voltage supports low-energy designs. The -40°C to 125°C specification provides broad environmental coverage. Designers should still evaluate input bias current, noise, and leakage against the sensor source impedance because low quiescent current alone does not establish metrological accuracy.

🎧

Audio Preamplification

The LM2904VQDRG4 can provide the first gain stage in a low-frequency audio preamplifier or active tone-control circuit. Its 700 kHz gain-bandwidth product covers the audio band, and the dual package allows one channel to amplify while the other implements a buffer, filter, or complementary gain path. The broad supply-voltage range is useful in legacy and industrial equipment operating from elevated rails. Because the LM2904V is a general-purpose amplifier rather than a low-noise audio part, designers should evaluate input voltage noise, distortion at the required signal level, output swing, and stability with the selected feedback network.

🔧

Active Filtering and Control Loops

The two amplifiers in the LM2904VQDRG4 can implement independent active-filter or feedback-control sections when the required bandwidth remains well below the 700 kHz gain-bandwidth product. A dual package reduces footprint and component count in analog control boards, while operation from -40°C to 125°C supports equipment exposed to wide environmental variation. Stability depends on noise gain, source impedance, load capacitance, and component tolerances, so the manufacturer-recommended compensation methods should be used. Check output drive against the feedback network because a wide voltage rating does not guarantee equal drive capability into every load.

🚗

Automotive and Heavy Equipment Control

For automotive or heavy-equipment applications requiring a qualified device, the LM2904VQDRG4Q1 provides the same 8-pin SOIC architecture and dual 30 V, 700 kHz operational-amplifier characteristics highlighted for LM2904VQDRG4. The -40°C to 125°C operating range suits demanding equipment environments, while two channels can support actuator feedback, sensor conditioning, or buffered references. Qualification alone does not guarantee suitability for every functional safety or environmental requirement; the complete manufacturer quality document, schematic review, grounding strategy, and transient analysis remain necessary for production designs.

Ringkasan Produk Direkomendasikan

MC3403DR Texas Instruments Digunakan di dalam: Industrial Sensor Signal Conditioning, Low-Side Current Sensing, Audio Preamplification LM2904VQDRG4Q1 Texas Instruments Digunakan di dalam: Industrial Sensor Signal Conditioning, Audio Preamplification, Automotive and Heavy Equipment Control LM2904B Same-family dual operational amplifier alternative Digunakan di dalam: Low-Side Current Sensing, Active Filtering and Control Loops, Automotive and Heavy Equipment Control LM2904BA Same-family alternative for portable instrumentation Digunakan di dalam: Battery-Powered Instrumentation, Active Filtering and Control Loops CA0158AE Cross-brand dual amplifier candidate Digunakan di dalam: Battery-Powered Instrumentation
Where can I buy LM2904VQDRG4 online?
The LM2904VQDRG4 can be requested through the Request a Quote form on this page. The part is a Texas Instruments dual operational amplifier in an 8-pin SOIC package, and the exact orderable identifier includes the 30 V-rated LM2904V grade, SOIC package, reel packing, and green environmental suffix. Request a quote to confirm current availability, order quantity, and shipment timing for the exact MPN.
What is the price of LM2904VQDRG4?
The current unit price for LM2904VQDRG4 is not fixed in this page because commercial terms and availability change independently of technical documentation. Use the Request a Quote form on this page for the exact LM2904VQDRG4 order code. The request should state the required quantity, shipment destination, and whether multiple reel quantities are needed so the commercial response can reflect the requested configuration.
What is the lead time for LM2904VQDRG4?
The current lead time for LM2904VQDRG4 should be confirmed through the Request a Quote form on this page. Lead time depends on the requested quantity, factory inventory, and shipping destination. The manufacturer identifies this MPN as an orderable LM2904V configuration in an 8-pin SOIC package, allowing the sourcing team to request a firm delivery commitment for the exact suffix rather than a generic LM2904 family designation.
Is LM2904VQDRG4 in stock?
Current stock for LM2904VQDRG4 should be confirmed through the Request a Quote form on this page. The exact MPN includes the V-grade operating range, SOIC package, reel packing, and green environmental designation, so stock for another LM2904 package or suffix should not be treated as equivalent availability. Submit the required quantity and destination to obtain a current inventory and delivery response.
What are the key specifications of LM2904VQDRG4 that engineers should know?
The LM2904VQDRG4 combines two independent general-purpose operational amplifiers, a 30 V maximum supply rating, a 700 kHz gain-bandwidth product, and approximately 500 µA of quiescent current per channel in an 8-pin SOIC package. According to the Texas Instruments LM2904V product information, its operating temperature range is -40°C to 125°C. These characteristics position it for low- and moderate-bandwidth signal conditioning rather than precision or high-speed analog work.
What is the operating voltage of LM2904VQDRG4?
The LM2904VQDRG4 supports a single-supply operating range of 3 V to 30 V and a dual-supply operating range of ±4.5 V to ±15 V. According to Texas Instruments, the device is specified for operation from -40°C to 125°C. The 30 V maximum supply rating provides useful headroom for industrial rails, but input common-mode and output-swing limits still determine which portions of that supply range are usable in a specific circuit.
Where do I download the LM2904VQDRG4 datasheet PDF?
The official LM2904VQDRG4 documentation is available through the Texas Instruments LM2904V product page linked as the datasheet URL on this page. That page provides family data, ordering information, quality information, and the exact part-details entry for LM2904VQDRG4. Use the manufacturer PDF for the final pin description, electrical characteristics, recommended operating conditions, and package drawings before releasing a PCB or production BOM.
Where can I find the LM2904VQDRG4 pinout?
The LM2904VQDRG4 pinout is the standard 8-pin dual-amplifier arrangement used by the LM2904V family: pin 1 is amplifier A output, pins 2 and 3 are amplifier A inverting and non-inverting inputs, pin 4 is V−, pins 5 and 6 are amplifier B non-inverting and inverting inputs, pin 7 is amplifier B output, and pin 8 is V+. Confirm these functions against the Texas Instruments pin-description table before routing the board.
LM2904VQDRG4 vs LM2904VQDRG4Q1 - which is better for automotive use?
LM2904VQDRG4Q1 is the better choice when the design requires the automotive-qualified LM2904V version, while LM2904VQDRG4 remains the standard general-purpose grade. Both are identified as dual 30 V, 700 kHz operational amplifiers in 8-pin SOIC packages with -40°C to 125°C operation. The meaningful selection criterion is qualification rather than a change in the core voltage, bandwidth, or temperature figures.
What is the difference between LM2904VQDRG4 and LM2904B?
LM2904B is a later family variant that retains the familiar dual general-purpose amplifier architecture while targeting improved performance in areas associated with the LM2904 family. The verified product information identifies LM2904B as an alternative family member. Both variants can be considered for 8-pin SOIC designs, but engineers should compare offset voltage, bias current, output swing, and stability in the manufacturer data before treating LM2904B as a drop-in replacement.
When should I choose LM2904VQDRG4 instead of a precision op amp?
Choose LM2904VQDRG4 when the circuit needs wide supply-voltage tolerance, low quiescent current, and general-purpose dual amplification rather than very low offset or drift. Its 30 V rating, 700 kHz gain-bandwidth product, and -40°C to 125°C range fit industrial control and instrument interfaces. Use a precision amplifier instead when input offset, bias current, and drift directly determine measurement accuracy.
Is LM2904VQDRG4 suitable for current sensing and sensor interfaces?
The LM2904VQDRG4 is suitable for many low-side current-sensing and sensor-conditioning circuits because it offers two channels, a 700 kHz gain-bandwidth product, and a 3 V to 30 V single-supply range. Place it in a differential or noninverting configuration, then verify input common-mode range and output swing at the expected current. Shunt amplifiers with high common-mode voltage may require a higher-voltage instrumentation amplifier instead.
What can replace LM2904VQDRG4?
LM2904VQDRG4Q1, LM2904B, and LM2904BA are the closest same-family candidates identified for the standard LM2904V in an 8-pin SOIC footprint. CA0158AE is a cross-brand candidate listed for comparison with LM2904VQDRG4. A replacement should be checked for exact pinout, supply range, input common-mode range, output swing, offset, bias current, stability, and operating temperature rather than being accepted solely from its package designation.
Is LM2904VQDRG4 the same as CA0158AE?
No. LM2904VQDRG4 and CA0158AE are related dual operational-amplifier alternatives, but they are not identical devices. The comparison must account for differences in input offset voltage, bias current, bandwidth, output drive, common-mode range, and electrical limits. CA0158AE may suit a compatible 8-pin design after those parameters and the manufacturer pin descriptions have been checked against LM2904VQDRG4.
What is the best Texas Instruments equivalent for LM2904VQDRG4?
LM2904VQDRG4Q1 is the closest same-manufacturer option when an automotive-qualified version is required, while LM2904B and LM2904BA are later family alternatives for general-purpose designs. According to Texas Instruments, the target provides two channels, a 30 V maximum supply rating, 700 kHz gain-bandwidth, and -40°C to 125°C operation in an 8-pin SOIC package. The final replacement decision should follow a complete electrical and pinout comparison.

Data referensi engineering untuk LM2904VQDRG4 — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose LM2904VQDRG4 for a standard industrial or commercial design that needs two general-purpose amplifiers, a 3 V to 30 V single-supply range, 700 kHz bandwidth, and low quiescent current. Choose LM2904VQDRG4Q1 when the same electrical platform and SOIC footprint are needed with automotive qualification. Consider LM2904B or LM2904BA when their updated offset, bias-current, or stability characteristics provide a measured improvement in the target circuit. Consider CA0158AE only after checking the complete electrical characteristics and pin descriptions because a shared package does not guarantee identical precision, common-mode behavior, or output drive. For high-accuracy measurement, low-noise audio, very low offset, or high-speed applications, a dedicated precision or high-performance amplifier is generally the better choice.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini LM2904VQDRG4Q1 LM2904B LM2904BA CA0158AE
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments STMicroelectronics
Package 8-pin SOIC (D) 8-pin SOIC (D) 8-pin SOIC (D) 8-pin SOIC (D) 8-pin SOIC (D)
Amplifier Configuration Dual operational amplifier Dual operational amplifier Dual operational amplifier Dual operational amplifier Dual operational amplifier

Diferensiator Kunci

  • Direct automotive-qualified option (vsLM2904VQDRG4Q1)
  • Broad supply-voltage capability in a dual package (vsCA0158AE)
  • Low quiescent demand with two independent channels (vsLM2904B)

Catatan Desain

Route each inverting-input and feedback connection directly to the relevant SOIC pin without intervening test pads or long branches. Keep resistor networks close to pins 2 and 6, and keep output routing away from the input and supply pins. This reduces parasitic feedback and helps preserve the stability margin expected from the 700 kHz gain-bandwidth device.

Place the supply bypass capacitor immediately between pins 4 and 8 with a short, low-inductance return path. If the circuit uses split positive and negative rails, decouple each rail independently according to the manufacturer layout guidance. Confirm that the maximum total supply voltage remains at or below 30 V, including startup overshoot, because transient overshoot can damage a device even when its nominal operating point is valid.

Do not assume that a 30 V supply rating makes every input and output valid at 30 V. Check the input common-mode range and output swing across temperature and load. Likewise, verify offset voltage and input bias current when the source impedance is high, since a general-purpose amplifier can amplify those errors even when its 500 µA per-channel quiescent current is suitable for the power budget.

Use short ground returns and avoid placing sensitive input traces beneath the package where they can couple to output or supply currents. For high-gain configurations, keep both input terminals at similar impedance to minimize offset caused by bias-current imbalance. If the source is capacitive, add the isolation resistance recommended by the manufacturer to prevent oscillation near the 700 kHz gain-bandwidth limit.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The standard LM2904VQDRG4 is identified as a general-purpose grade, while the separate LM2904VQDRG4Q1 orderable variant is automotive qualified. Compliance attributes beyond that distinction require confirmation from the manufacturer product documentation.

Data disahkan pada: 2026-11-09 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

LM2904VQDRG4 LM2904VQDRG4 datasheet LM2904VQDRG4 datasheet pdf LM2904VQDRG4 pinout LM2904VQDRG4 specifications LM2904VQDRG4 SOIC-8 LM2904VQDRG4 equivalent LM2904VQDRG4 replacement LM2904VQDRG4 cross reference LM2904VQDRG4 vs LM2904VQDRG4Q1 LM2904VQDRG4 current sensing LM2904VQDRG4 price Texas Instruments LM2904VQDRG4 LM2904VQDRG4 footprint LM2904VQDRG4 application circuit

Komponen dan Istilah Terkait

Texas Instruments LM2904VQDRG4 LM2904V LM2904VQDRG4Q1 LM2904B LM2904BA CA0158AE STMicroelectronics dual operational amplifier op amp analog integrated circuit semiconductor signal conditioning current sensing active filter feedback control gain-bandwidth product quiescent current input offset voltage input bias current common-mode input range 8-pin SOIC SOIC family surface-mount package -40°C to 125°C
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ