Texas Instruments

LM293ADR - 36 V Dual Comparator | Texas Instruments

MPN: LM293ADR ✓ Aktif
2 V to 36 V Vdss 0.4 mA typical Id 8-pin SOIC Package
MOQ: 1 |

LM293ADR Ringkasan

The Texas Instruments LM293ADR is a dual differential comparator designed for industrial applications, with two comparator channels, a 2 V to 36 V supply range, and an 8-pin SOIC package. The device supports open-collector and open-drain outputs and is specified for an extended temperature range of -25°C to +85°C. According to the manufacturer product page, its common-mode input voltage range includes ground, making it suitable for sensing signals close to the lower supply rail.

A differential comparator is an analog integrated circuit that compares two input voltages and produces a digital output indicating which input is higher. The LM293 belongs to the comparator hierarchy within interface ICs, where analog input conditioning is converted into a logic-compatible decision. Its open-collector output allows the output state to be defined by an external pull-up resistor, making the device useful in wired-logic, relay-driving, and open-drain bus interfaces.

The LM293ADR provides several characteristics suited to robust circuit design. Its 36 V maximum supply permits operation in industrial environments, while its rail-to-rail input capability allows comparisons near ground. The manufacturer identifies the output as compatible with TTL, MOS, and CMOS logic. The differential input voltage range can equal the maximum-rated supply voltage, and the device is specified for operation over a 2 V to 36 V total supply range.

The LM293A family uses two independent comparator sections within one package. Each section has inverting and non-inverting inputs, an output, and shared supply connections. The open-collector architecture requires a pull-up resistor when the output must actively drive high. The result is a flexible interface between high-voltage or low-level analog signals and digital control logic without requiring a rail-to-rail push-pull output stage.

Typical applications include overvoltage and undervoltage detection, sensor-threshold conditioning, industrial control interfaces, relay or solenoid drivers, window or level comparators, and open-drain bus signaling. The dual-channel configuration allows two related threshold decisions to be implemented in one package, reducing board area when both channels operate from the same supply.

When designing the circuit, choose the pull-up resistor for the required sink current and logic level, and verify that all input pins remain within the common-mode range at every supply condition. Because the output is open-collector, a floating output can occur without a pull-up. Confirm timing against the application’s threshold-crossing rate and maintain adequate supply decoupling close to the power pin.

This page combines the manufacturer’s electrical and ordering information with package guidance, comparison criteria, sourcing support, and practical application notes to help engineers evaluate the LM293ADR for new and existing comparator designs.

Alternatif penggantian untuk LM293ADR — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian LM293ADR (sama faktor bentuk dan footprint) — berbeda di dalam Output Type, Differential Input Voltage Range, Industrial Grade, Logic Compatibility, Operating Temperature Range.

Texas Instruments
Output Type: Open-collector/open-drain
Differential Input Voltage Range: -38 V to +38 V
Industrial Grade: Industrial
Bandingkan dengan LM293ADR →
Texas Instruments
Output Type: Open collector
Differential Input Voltage Range: -38 V to +38 V
Operating Temperature Range: 0 C to +70 C
Bandingkan dengan LM293ADR →

LM393ADR

✅ Drop-In
Texas Instruments
📦 8-pin SOIC
Dual differential comparator · 2 channels · Open collector · Includes ground · -38 V to +38 V · TTL, MOS, and CMOS · Commercial grade · 8-SOIC

Kontak untuk harga

Lihat Datasheet →

LM393BDR

✅ Drop-In
📦 8-pin SOIC
Same 8-pin SOIC footprint and open-collector architecture; the B-version electrical limits differ from LM293A and require datasheet comparison.

📋 Alternatif referensi (tidak dalam katalog)

LM293BDR

✅ Drop-In
📦 8-pin SOIC
Same 8-pin SOIC footprint; the B-version has revised specifications relative to LM293A while retaining the dual comparator and open-collector arrangement.

📋 Alternatif referensi (tidak dalam katalog)

LM2903BDR

✅ Drop-In
📦 8-pin SOIC
Same 8-pin SOIC footprint and open-collector output arrangement; revised B-version limits and temperature coverage must be verified for the target application.

📋 Alternatif referensi (tidak dalam katalog)

LM293ADT

✅ Drop-In
📦 8-pin SO
The comparison lists the same dual open-collector, 2 V to 36 V comparator architecture in an 8-pin SO package; response-time conditions and qualification differ.

📋 Alternatif referensi (tidak dalam katalog)

LM293ADR Rating Maksimal & Karakteristik Listrik

Comparator Channels 2 channels
Supply Voltage Range 2 V to 36 V
Maximum Supply Voltage 36 V
Common-Mode Input Range Includes ground
Differential Input Voltage Range ±38 V
Response Time 300 ns
Tipe Output Open-collector / open-drain
Logic Compatibility TTL, MOS, and CMOS
Input Offset Voltage at 25°C 2 mV maximum
Quiescent Current per Channel 0.4 mA typical
Rentang Suhu Kerja -25°C to +85°C
Paket 8-pin SOIC
Tipe Mounting Surface mount
Product Classification Dual precision standard comparator
Industrial Grade Yes

LM293ADR 8-pin soic Diamant Konfigurasi Panduan

Konfigurasi pin untuk LM293ADR (8-pin soic pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.

Diamant diagram pakai pakai 8-pin soic untuk LM293ADR

Tidak ada data diatribut pin yang tersedia untuk LM293ADR.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

LM293ADR cocok untuk 6 aplikasis: Industrial Overvoltage Detection, Sensor Threshold Conditioning, Relay and Solenoid Interfacing, Battery Supply Monitoring, Motor and Position Limit Detection, Open-Drain Alarm and Fault Bus.

🏭

Industrial Overvoltage Detection

The LM293ADR fits industrial overvoltage detection because each channel can compare a divided feedback voltage against a reference while operating from a supply extending to 36 V. The manufacturer specifies a common-mode input range that includes ground and a differential input range of ±38 V, providing useful range for protected industrial supplies. Its open-collector output can directly pull down a system fault line while an external pull-up establishes the inactive state. The two channels can implement overvoltage and undervoltage thresholds in one 8-pin SOIC package. Because output timing and saturation behavior depend on load and supply conditions, the design should include a suitable pull-up, local supply bypassing, and a defined response time for the protection system.

🧩

Sensor Threshold Conditioning

The LM293ADR can convert a slowly changing sensor signal into a clean digital threshold event when the signal lies within its common-mode range. The 2 mV maximum input offset at 25°C and 300 ns listed response time are useful figures for assessing small-signal discrimination, although actual accuracy also depends on the reference and feedback network. Two independent channels allow separate rising and falling thresholds or comparison of two sensor outputs. The open-drain output is useful when driving a wired-OR alarm line or a microcontroller input with an adjustable logic pull-up. Place the comparator close to the sensed node when the source impedance is high, and use resistor ratios that keep both inputs inside the allowable common-mode range.

🔧

Relay and Solenoid Interfacing

The LM293ADR is suitable as the decision stage in relay and solenoid interfaces because its open-collector output can sink the current required by a relay driver transistor. The comparator evaluates a control or feedback signal before enabling the external driver, while the open-drain structure avoids actively driving the load supply. A pull-up resistor on the output establishes the complementary logic state. The 36 V supply capability supports industrial control environments, but the output’s maximum sink current and saturation voltage must be checked against the driver design. Keep the relay coil return current away from sensitive comparator input traces, and provide a separate protection path for inductive transients so switching noise cannot create false threshold crossings.

⚡

Battery Supply Monitoring

The LM293ADR can supervise a battery-backed or industrial supply by comparing a scaled battery voltage with a reference at each of its two channels. Its 2 V to 36 V operating range accommodates many 24 V nominal systems, while the common-mode range including ground supports low-end monitoring approaches. The open-collector outputs can separately report overvoltage and undervoltage conditions to a controller or fault bus. A pull-up defines the inactive state and allows wired-OR behavior. Because battery systems experience wide transients and changing source impedance, the divider should include filtering and clamping as required. Verify the comparator behavior over the full battery range, temperature range, and startup ramp rather than relying only on a nominal operating point.

🏭

Motor and Position Limit Detection

The LM293ADR can implement limit-switch and position-sensor interfaces in industrial motor-control systems. One channel can evaluate a normally closed or normally open limit switch, while the other monitors a second direction or stage. The open-collector output supports fail-safe wired logic when an open circuit or missing pull-up is interpreted as a fault. The 2 V to 36 V supply range is useful for systems with protected 12 V or 24 V rails, and the common-mode input range includes ground for switch returns referenced to the lower rail. Route switch wiring away from motor power currents and use filtering on long cables. Confirm that the comparator’s input protection and common-mode limits accommodate the switch transients and supply variation present in the motor environment.

🔧

Open-Drain Alarm and Fault Bus

The LM293ADR can drive an open-drain alarm bus because each comparator output can pull a shared line low and release it when the input condition changes. This arrangement supports multiple fault sources with a common pull-up and helps represent a wired-OR alarm condition. The two channels can monitor separate rails or produce an upper and lower threshold event. Texas Instruments identifies the output as compatible with TTL, MOS, and CMOS logic. Choose the pull-up voltage for the connected receiver and size the resistor to balance sink current against bus rise time. For safety-related behavior, verify output states during power-up, input overvoltage, and loss of the pull-up so the alarm interpretation remains deterministic.

Where can I download the LM293ADR datasheet PDF?
The LM293ADR datasheet and product information are available from the Texas Instruments LM293 product page. The ordering page identifies LM293ADR as a dual precision standard comparator in an 8-pin SOIC package. Texas Instruments states that the device is an industrial-grade dual differential comparator with a supply range extending to 36 V and open-collector outputs.
What are the key specifications of LM293ADR that engineers should know?
The LM293ADR is a dual differential comparator with two channels, a 2 V to 36 V supply range, and an 8-pin SOIC package. Its listed response time is 300 ns, operating temperature range is -25°C to 85°C, and outputs are open-collector and compatible with TTL, MOS, and CMOS logic. The manufacturer also identifies a common-mode input range that includes ground.
What is the operating voltage of LM293ADR?
The LM293ADR operates from 2 V to 36 V. According to the Texas Instruments LM293 product page, the common-mode input range includes ground and the differential input range can equal the maximum-rated supply voltage. The manufacturer also states that the output is compatible with TTL, MOS, and CMOS logic.
Where can I find the LM293ADR pinout?
Use the pin-description table and package drawing in the Texas Instruments LM293 datasheet to assign the eight LM293ADR connections. The device is packaged in an 8-pin SOIC, with two comparator channels, a shared supply, and an open-collector output for each channel. Confirm the exact ordering suffix and pin orientation against the manufacturer drawing before laying out the PCB.
What can replace LM293ADR?
The Texas Instruments LM393ADR is a practical drop-in candidate because it uses the same 8-pin SOIC comparator arrangement and open-collector output architecture. Texas Instruments identifies the LM393B family as a drop-in replacement for the LM293 family. Confirm input thresholds, output behavior, temperature range, and production requirements before approving any substitution.
Is LM293ADR the same as LM393ADR?
The LM293ADR and LM393ADR use the same 8-pin SOIC footprint and both provide two open-collector differential comparators. They are not identical in every operating characteristic, so verify offset voltage, timing, supply limits, and temperature coverage for the target circuit. Texas Instruments specifically identifies its B-version families as drop-in replacements for LM293 and LM393 devices.
LM293ADR vs LM293ADT - which is better for an industrial control board?
Both LM293ADR and LM293ADT provide dual open-collector comparators in an 8-pin SOIC package. The comparison result identifies a 36 V maximum supply, 2 V minimum supply, 2 mV maximum offset at 25°C, and 0.4 mA typical quiescent current per channel for the compared devices. Choose using manufacturer qualification, temperature grade, sourcing status, and lifecycle requirements.
What is the best STMicroelectronics equivalent for LM293ADR?
The STMicroelectronics LM293ADT is the directly identified cross-brand candidate. The comparison data lists an 8-pin SO package, two open-collector channels, a 2 V to 36 V supply range, and a 300 ns response-time class. Review the STMicroelectronics datasheet for threshold accuracy, common-mode behavior, temperature grade, and lifecycle status before using it as a drop-in replacement.
When should I choose LM293ADR over LM393ADR?
Choose LM293ADR when the design specifically calls for the LM293A-family offset, timing, temperature, or qualification characteristics. Choose LM393ADR when its datasheet parameters satisfy the application and the manufacturer confirms the intended replacement relationship. Both use an 8-pin SOIC footprint, but electrical characterization and lifecycle suitability still determine the correct choice.
Is LM293ADR suitable for sensing a signal near ground?
Yes, the LM293ADR is suitable for many ground-referenced sensing applications because Texas Instruments states that its common-mode input voltage range includes ground. The circuit must still remain within the full common-mode limits at the actual supply voltage, including tolerance and transient effects. The open-collector output also needs a suitable pull-up when a valid high level is required.
How do I use the open-drain output of LM293ADR?
Attach a pull-up resistor from the LM293ADR output to the logic supply so the transistor can pull the node low while the external resistor establishes the high state. Size the resistor for the required sink current, rise time, and bus capacitance. According to Texas Instruments, the output is compatible with TTL, MOS, and CMOS logic.
Where can I buy LM293ADR online?
Use the Request a Quote form on this page to request LM293ADR availability, current lead time, and order quantity. The manufacturer lists LM293ADR as an active industrial-grade part in an 8-pin SOIC package. Confirm the exact suffix, delivery packaging, and any obsolete-risk requirements in the quotation response before releasing a production order.
What is the price of LM293ADR?
Request a current LM293ADR quotation through the Request a Quote form on this page. The quote should specify the exact LM293ADR order code, quantity, delivery packaging, and target shipment region. This approach keeps commercial terms tied to the current supply position instead of displaying a potentially stale price figure.
Is LM293ADR in stock and what is its lead time?
Request the current LM293ADR inventory status, minimum order quantity, and production lead time through the Request a Quote form on this page. Texas Instruments identifies the LM293A ordering option with an -25°C to 85°C operating range in an 8-pin SOIC package. The quotation response should reflect current factory and distribution availability.
What compliance and qualification information applies to LM293ADR?
The manufacturer identifies LM293ADR as an industrial-grade LM293A-family device, but the listed ordering information does not provide a complete RoHS, REACH, AEC-Q100, lead-free, or halogen-free declaration for this exact suffix. Review the Texas Instruments product page and current material-compliance documentation before using the part in a regulated or automotive design.

Data referensi engineering untuk LM293ADR — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the LM293ADR for a new dual-threshold design that needs a 2 V to 36 V supply, an 8-pin SOIC footprint, open-collector outputs, and ground-referenced sensing. The listed 300 ns response time and 2 mV maximum offset at 25°C provide useful initial points for signal-path design. Choose LM393ADR or LM393BDR when the LM393-family characterization better matches the application and the manufacturer confirms the replacement relationship. LM293BDR provides a same-manufacturer alternative with revised B-version specifications, while LM2903BDR is useful when its specific limits satisfy the design. LM293ADT is the identified STMicroelectronics cross-brand option in the same 8-pin SO footprint. For every alternative, verify common-mode limits, offset over temperature, output saturation at the selected pull-up current, propagation delay under the actual load, and lifecycle status before approving a drop-in substitution.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini LM393ADR LM393BDR LM293BDR LM2903BDR LM293ADT
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SO
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments STMicroelectronics
Comparator Channels 2 channels 2 channels 2 channels 2 channels 2 channels 2 channels
Output Type Open-collector / open-drain Open-collector / open-drain Open-collector / open-drain Open-collector / open-drain Open-collector / open-drain Open-collector

Diferensiator Kunci

  • Two independent threshold channels in a compact SOIC (vsLM393ADR)
  • Wide industrial supply capability (vsLM293ADT)
  • Ground-referenced input capability (vsLM2903BDR)

Catatan Desain

Do not treat the LM293ADR output as a push-pull logic output. The open-collector transistor actively pulls the output low, while an external pull-up resistor must establish the high state. Select the pull-up voltage for the connected TTL, MOS, or CMOS receiver, and calculate its resistance from the required sink current and desired rising-edge time. A missing pull-up can leave the output node floating, so include continuity and fault-state analysis in the design review.

Place the supply bypass capacitor close to the VCC and ground pins, and keep comparator input traces short and away from relay, motor, and switching-conductor paths. High-impedance divider nodes require low-leakage components and guarding if contamination or board leakage could shift the threshold. Because the common-mode range includes ground, check the actual lower input limit at the minimum supply rather than assuming every ground-referenced signal remains valid.

Use the manufacturer input offset and timing specifications as the starting point for threshold-error analysis, then include resistor tolerance, reference drift, output saturation, and pull-up rise time in the end-to-end error budget. The listed 300 ns response time is a device characteristic rather than a complete system-delay guarantee. For slow thresholds, add controlled hysteresis to prevent output chatter around the switching point.

The 36 V maximum supply supports industrial environments but does not remove the need for transient protection. Use appropriate fusing, surge suppression, reverse-polarity protection, and input clamping where the supply can experience automotive-like or industrial transients. Keep any protection network outside the comparator’s high-current output path so it does not disturb threshold accuracy or pull-up rise time.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

Texas Instruments identifies LM293ADR as an industrial-grade component, but no exact suffix-specific material-compliance declaration was included. Review current manufacturer compliance documentation before using the device in regulated or automotive equipment.

Data disahkan pada: 2026-11-15 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

lm293adr datasheet LM293ADR LM293ADR datasheet PDF LM293ADR pinout LM293ADR specifications LM293ADR 36V comparator Texas Instruments LM293ADR LM293ADR replacement LM293ADR equivalent LM293ADR vs LM393ADR LM293ADR vs LM293ADT LM293ADR application circuit LM293ADR SOIC-8 footprint LM293ADR price LM293ADR stock

Komponen dan Istilah Terkait

Texas Instruments LM293ADR LM293A LM393ADR LM393BDR LM293BDR LM2903BDR LM293ADT STMicroelectronics dual differential comparator comparator interface IC analog comparator open-collector output open-drain output common-mode input voltage differential input voltage input offset voltage propagation delay TTL compatibility CMOS compatibility SOIC-8 industrial control sensor threshold conditioning battery supervision
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ