Texas Instruments

LM324KADR - Quad 30V 1.2MHz Op Amp | Texas Instruments

MPN: LM324KADR ✓ Aktif
30 V Vdss SOIC-14 (D), 14 pins Package Internal Speed
MOQ: 1 |

LM324KADR Ringkasan

Texas Instruments LM324KADR is a quad, general-purpose operational amplifier rated for a 30 V maximum supply, 1.2 MHz gain-bandwidth performance, and 3 mV input offset voltage. The device contains four independent, internally frequency-compensated amplifiers and is available in a 14-pin SOIC (D) package. Its improved ESD withstand rating is 2 kV, making it suitable for industrial control, instrumentation, signal conditioning, and low-cost general-purpose analog systems.

An operational amplifier is a high-gain differential amplifier whose external feedback network determines its behavior. In the signal-chain hierarchy, the LM324KADR belongs to the operational-amplifier family within amplifier ICs and analog signal-chain devices. Unlike a single-amplifier package, this quad device integrates four independent amplifiers, allowing one component to support multiple analog channels while reducing package count and board area.

Key features include four independent amplifiers, operation from a single supply or split supplies, a 1.2 MHz gain-bandwidth product, and a 3 mV input offset voltage. The 14-pin SOIC package also provides improved 2 kV ESD protection. These characteristics make the LM324KADR appropriate for low-frequency control loops, sensor amplification, buffering, and general-purpose signal processing where a broad supply-voltage range and economical quad integration are more important than precision or high-speed performance.

The amplifiers are internally frequency compensated, which simplifies closed-loop design when stable operation is required. The 30 V maximum supply supports higher-voltage industrial interfaces than many low-voltage rail-to-rail amplifier families. Split-supply operation is also possible when the difference between the supplies remains within the device's permitted range. Its 1.2 MHz bandwidth is adequate for audio-band and general control applications but is not intended for high-speed instrumentation or RF signal paths.

Typical uses include 4–20 mA current-loop receivers, industrial sensor interfaces, active low-pass filters, audio preamplifier stages, relay and motor-control loops, and general instrumentation. Using four amplifiers in one SOIC package simplifies multi-channel designs, although each amplifier has an independent signal path and shares the common supply and ground pins.

PCB design should keep sensitive input and feedback traces short, place input bypassing close to the supply pins, and maintain a stable ground reference around the device. Do not substitute a rail-to-rail amplifier without checking input common-mode range, output swing, offset voltage, bandwidth, stability, and maximum supply voltage; those electrical differences can change the behavior of an existing LM324-based circuit.

Alternatif penggantian untuk LM324KADR — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian LM324KADR (sama faktor bentuk dan footprint) — berbeda di dalam Package, Operating Temperature Range, Supply Configuration, Amplifier Type, Input Offset Voltage.

Texas Instruments
Package: 14-pin SSOP (DB)
Operating Temperature Range: 0°C to 70°C
Bandingkan dengan LM324KADR →
Texas Instruments
Package: 14-pin SOIC (D)
Operating Temperature Range: 0 C to +70 C
Bandingkan dengan LM324KADR →
Texas Instruments
Package: 14-pin SOIC
Bandingkan dengan LM324KADR →
Texas Instruments
Package: 14-SO
Supply Configuration: Single supply or dual supply
Bandingkan dengan LM324KADR →
Texas Instruments
Package: 14-pin SOIC (NS, SOP)
Supply Configuration: Single or split supply
Bandingkan dengan LM324KADR →
Texas Instruments
Package: 14-pin SOIC (surface mount)
Operating Temperature Range: 0 C to +70 C
Amplifier Type: Single-supply general-purpose operational amplifier, internally frequency compensated for unity gain
Bandingkan dengan LM324KADR →

LM324ADR

✅ Drop-In
Texas Instruments
📦 SOIC-14 (D)
4 circuits · 30 V · 1.2 MHz · 3 mV · Single supply or split supply · Internally compensated · True differential inputs · 14 pins

Kontak untuk harga

Lihat Datasheet →

LM324ADG

✅ Drop-In
onsemi
📦 SOIC-14 (D)
General Purpose · 4 · 1 MHz · 0.6 V/us · 3 V to 32 V · +/-1.5 V to +/-16 V · 3 mV · 14-SOIC (0.154 in, 3.90 mm Width)

Kontak untuk harga

Lihat Datasheet →

LM324ADBR

✅ Drop-In
Texas Instruments
📦 SOIC-14 (D)
Quad general-purpose operational amplifier · 4 circuits · 30 V · 3 V to 32 V · 1.2 MHz · 3 mV · 20 nA · 0.2 uA

Kontak untuk harga

Lihat Datasheet →

LM324KNSR

✅ Drop-In
Texas Instruments
📦 SOIC-14 (D)
4 independent amplifiers · Quad general-purpose operational amplifier · 30 V · Single or split supply · 1.2 MHz · 2 kV · 0 °C to 70 °C · 14-pin SOIC (NS, SOP)

Kontak untuk harga

Lihat Datasheet →

LM324ANSR

✅ Drop-In
Texas Instruments
📦 SOIC-14 (D)
Quad general-purpose operational amplifier · 4 independent sections · 14-SO · Surface mount · Single supply or dual supply · 0.8 mA typical · Includes ground · Internal frequency compensation

Kontak untuk harga

Lihat Datasheet →

LM324KADR Rating Maksimal & Karakteristik Listrik

Amplifier Type Quad general-purpose operational amplifier
Number of Amplifiers 4 circuits
Maximum Supply Voltage 30 V
Gain-Bandwidth Product 1.2 MHz
Input Offset Voltage 3 mV
ESD Withstand 2 kV
Rentang Suhu Kerja 0 °C to 70 °C
Paket SOIC-14 (D), 14 pins
Tipe Mounting Surface mount
Supply Configuration Single supply or split supply
Frequency Compensation Internal

Konfigurasi Pin LM324KADR

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
Pin produk 1 OUT1 — Output of amplifier 1
Pin produk 2 IN1- — Inverting input of amplifier 1
Pin produk 3 IN1+ — Non-inverting input of amplifier 1
Pin produk 4 V- — Negative supply connection
Pin produk 5 IN2+ — Non-inverting input of amplifier 2
Pin produk 6 IN2- — Inverting input of amplifier 2
Pin produk 7 OUT2 — Output of amplifier 2
Pin produk 8 OUT3 — Output of amplifier 3
Pin produk 9 IN3- — Inverting input of amplifier 3
Pin produk 10 IN3+ — Non-inverting input of amplifier 3
Pin produk 11 V+ — Positive supply connection
Pin produk 12 IN4+ — Non-inverting input of amplifier 4
Pin produk 13 IN4- — Inverting input of amplifier 4
Pin produk 14 OUT4 — Output of amplifier 4

Aplikasi Umum

LM324KADR cocok untuk 6 aplikasis: Industrial 4–20 mA Sensor Interface, Sensor Signal Conditioning, Audio Preamplifier Stages, Active Filter and Control Loops, Power Supply Feedback and Monitoring, Relay and Motor Control Interfaces.

🏭

Industrial 4–20 mA Sensor Interface

The LM324KADR fits a 4–20 mA receiver when the design needs four general-purpose amplifiers, operation from a broad supply range, and a common 14-pin SOIC footprint. One channel can buffer the signal produced by a precision current-to-voltage converter, while other channels provide active filtering, gain, or diagnostics. Its 1.2 MHz gain-bandwidth product is ample for the bandwidth normally associated with process-control loops, and the 30 V maximum supply provides margin for industrial interface voltages. However, the input common-mode range, output swing, offset voltage, and channel-to-channel matching must remain inside the actual supply-rail conditions because the LM324KADR is not universally rail-to-rail.

🧩

Sensor Signal Conditioning

The four independent amplifiers in the LM324KADR allow a compact analog front end to amplify, filter, and buffer outputs from resistive, capacitive, or voltage-based sensors. A 1.2 MHz gain-bandwidth product supports low-frequency control and instrumentation stages, while the internally compensated architecture simplifies implementation of ordinary closed-loop gain configurations. The 3 mV nominal input offset specification should be included in the error budget when the sensor signal is small. For bridge or high-impedance sensors, input bias current and common-mode limits must be checked because the general-purpose LM324 architecture is not optimized for extremely low bias current or rail-to-rail sensing.

🎧

Audio Preamplifier Stages

The LM324KADR can implement general-purpose audio preamplifier, mixer, and buffer stages where a four-amplifier package reduces component count. Its 1.2 MHz gain-bandwidth product provides more bandwidth than the audio band, and the 30 V maximum supply supports higher-amplitude headroom when operating from split supplies. The nominal 3 mV input offset can appear as low-level distortion or channel imbalance in high-gain audio paths, so designers should consider the signal level, source impedance, and required noise performance. Stable feedback-network values and adequate output-current margin are necessary to avoid distortion at the limits of the amplifier's drive capability.

⚡

Active Filter and Control Loops

The LM324KADR is well suited to active low-pass filters, integrators, comparators, and servo-control loops built with passive feedback networks. Its internal frequency compensation simplifies the design of stable closed-loop amplifiers, while four independent channels allow one package to form several filter poles or separate control functions. The 1.2 MHz gain-bandwidth product gives useful margin over low-frequency control loops, but loop-gain and phase-margin calculations remain necessary when operating close to the amplifier's bandwidth limit. Component tolerances, input/output swing, and the 3 mV nominal offset directly influence cutoff frequency, DC error, and useful signal range.

🔋

Power Supply Feedback and Monitoring

Within a linear power-supply or monitoring subsystem, the LM324KADR can supervise an output, amplify a feedback error signal, or provide buffering for a comparator-based protection circuit. Its ability to operate from a broad supply range and split supplies is useful when the monitored rail is referenced to a higher-voltage system, while the four-channel package leaves spare amplifiers for redundant monitoring or filtering. The 30 V maximum supply rating is the principal design boundary; input and output common-mode limits must still be respected. Offset error, output swing, and stability near the output rail should be evaluated against the required protection threshold.

🔧

Relay and Motor Control Interfaces

The LM324KADR can amplify error signals and drive transistor stages in relay, solenoid, or motor-control interfaces when the system operates from a conventional industrial supply. Four amplifiers permit integration of command amplification, current sensing, feedback filtering, and output-enable logic without using four separate packages. The 1.2 MHz gain-bandwidth product is normally sufficient for slower closed-loop control systems, although inductive loads require external flyback protection and care to prevent output saturation during switching transients. Because the device is not a power driver, verify output-current capability, output swing, thermal dissipation, and the external transistor dissipation separately.

What are the key specifications of LM324KADR that engineers should know?
The LM324KADR is a quad general-purpose operational amplifier with a 30 V maximum supply, 1.2 MHz gain-bandwidth product, 3 mV input offset voltage, and 2 kV improved ESD withstand. According to the Texas Instruments LM324K product page, the device is packaged as a 14-pin SOIC for an industrial temperature range of 0 °C to 70 °C. Four independent amplifiers share the supply rails while retaining separate inputs and outputs.
Where can I download the LM324KADR datasheet PDF?
The LM324KADR technical documentation is available through the Texas Instruments LM324K product page at https://www.ti.com/product/LM324K. The manufacturer product information identifies the device as a quad, 30 V, 1.2 MHz operational amplifier with a 3 mV offset voltage and improved 2 kV ESD protection. Use the electrical-characteristics and pin-configuration sections of the manufacturer datasheet when assigning pins or designing around the 14-pin SOIC footprint.
What is the LM324KADR pinout?
The LM324KADR uses a standard 14-pin quad-operational-amplifier arrangement. Pins 1, 7, 8, and 14 are outputs; pins 2, 6, 9, and 13 are inverting inputs; pins 3, 5, 10, and 12 are non-inverting inputs; pin 4 is the negative supply and pin 11 is the positive supply. Confirm the physical orientation and package details against the Texas Instruments pin-configuration drawing before PCB routing.
Can LM324KADR operate from a single 5 V supply?
Yes, the LM324KADR can operate from a single supply within the device's specified operating range. The Texas Instruments LM324K family is designed for single-supply operation and also supports split supplies when their total span remains within the permitted range. Because this is a non-rail-to-rail device in many operating configurations, input and output voltage limits must be checked against the actual supply voltages before the circuit is released.
What is the difference between LM324KADR and LM324ADR?
The LM324KADR is the K-series LM324 variant identified by Texas Instruments as having a 30 V maximum supply, 1.2 MHz gain-bandwidth product, 3 mV input offset voltage, and improved 2 kV ESD protection. Comparison listings identify LM324ADR as another member of the same 14-pin SOIC family. For an existing design, verify the exact temperature grade, offset limit, and ESD rating in the manufacturer ordering information before replacing one MPN with the other.
What can replace LM324KADR on the same 14-pin SOIC footprint?
The closest drop-in choices are other LM324-family devices specified in 14-pin SOIC packages, including LM324ADR, LM324ADG, LM324ADBR, LM324KNSR, and LM324ANSR. These alternatives share the operational-amplifier architecture and 14-pin outline, but the suffix can identify a different temperature grade, offset specification, or qualification status. Compare the manufacturer's ordering table and electrical characteristics before substitution.
Is LM324KADR the same as LM324ADBR?
LM324KADR and LM324ADBR are closely related 14-pin SOIC LM324-family amplifiers, but their suffixes can indicate different ordering attributes or temperature grades. The verified LM324K ordering information specifies a 30 V, 1.2 MHz, 3 mV-offset K-series device with improved 2 kV ESD protection and a 0 °C to 70 °C range. Treat LM324ADBR as a drop-in footprint candidate, not as an unconditional functional substitute until its grade limits are confirmed.
When should I choose LM324KADR instead of a rail-to-rail quad op amp?
Choose LM324KADR when a 14-pin SOIC, broad supply capability, four integrated amplifiers, and a straightforward general-purpose pin arrangement are the main priorities. A rail-to-rail quad amplifier should be selected when operation near the supply rails, lower offset voltage, wider bandwidth, or lower noise is necessary. The LM324KADR's 1.2 MHz bandwidth and 3 mV nominal offset support conventional control and instrumentation functions but do not match precision or rail-to-rail performance.
Is LM324KADR suitable for a 4–20 mA industrial sensor input?
Yes, the LM324KADR is suitable for many 4–20 mA receiver circuits because it combines four amplifiers, a 30 V maximum supply, and operation from split supplies. The input stage can provide buffering and gain after the current-to-voltage conversion while the remaining channels support filtering or output conditioning. The input common-mode range, output swing, offset error, and channel-to-channel variation must be checked against the field-side voltage and noise requirements.
Where can I buy LM324KADR and check its current lead time?
Use the Request a Quote form on this page to request LM324KADR availability, current lead time, and order quantities. The form is the appropriate channel because inventory and commercial terms can change by region, quantity, and date. Provide the required SOIC-14 package, tape-and-reel or other shipment format, target quantity, and delivery schedule in the request.
What is the current price of LM324KADR?
The current commercial price and available quantity are handled through the Request a Quote form on this page. Submit the exact MPN LM324KADR, required package format, order quantity, and destination so the quotation reflects current availability. Do not substitute a generic LM324 MPN because suffix codes can change package, reel orientation, temperature grade, or ordering attributes.
Is LM324KADR in stock for immediate shipment?
Current LM324KADR inventory should be confirmed through the Request a Quote form on this page. The form accepts the exact part number and quantity needed for a supply response, including any reel, tray, or alternate packaging requirements. Treat shipment timing as schedule-dependent until a quotation and order confirmation are issued.
What is the best cross-brand equivalent for LM324KADR?
A cross-brand equivalent must be selected only after confirming the same 14-pin SOIC pinout, supply rating, input and output voltage limits, offset voltage, bandwidth, and temperature range. The cross-reference information identifies several LM324-compatible manufacturers but does not establish a complete, pin-verified MPN list. Therefore, request manufacturer cross-reference support for the target manufacturer or use the Texas Instruments cross-reference search before approving a competitor part.
What design limitations matter for LM324KADR power and thermal performance?
The principal design issue is the internal power dissipation produced by the difference between supply and output voltage multiplied by output current. At high output current or a large supply-to-output difference, the 14-pin SOIC can become hot even though the amplifier itself requires no external heatsink in ordinary service. The manufacturer datasheet should be used for output-current and thermal limits; estimate board-level temperature rise from actual dissipation, copper area, and ambient temperature before operation.
Does LM324KADR support RoHS and REACH compliance?
The current Texas Instruments product page should be consulted for the authoritative compliance status associated with LM324KADR and its complete ordering codes. This product record does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status, so those attributes remain unconfirmed here. Check the manufacturer material-declaration and product-compliance records before using the component in a regulated production environment.

Data referensi engineering untuk LM324KADR — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose LM324KADR for general-purpose analog designs that require four independent amplifiers, a 14-pin SOIC footprint, operation from a broad supply range, and 1.2 MHz bandwidth. It is particularly practical for industrial sensor interfaces, active filters, audio preamplifiers, and low-frequency control loops. Select LM324KNSR when its ordering attributes and production status fit the program while retaining the same LM324 electrical class. LM324ADR, LM324ADG, and LM324ADBR are footprint candidates, but their suffix-specific offset, temperature, and ESD limits must be checked before substitution. Do not choose this family for precision measurement, operation very close to the supply rails, low-bias-current sources, or high-speed signal conditioning; use a rail-to-rail, low-offset, or higher-bandwidth amplifier for those requirements instead.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini LM324ADR LM324ADG LM324ADBR LM324KNSR LM324ANSR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package SOIC-14 (D) SOIC-14 (D) SOIC-14 (D) SOIC-14 (D) SOIC-14 (D) SOIC-14 (D)
Amplifier Configuration Quad Quad Quad Quad Quad Quad
Number of Pins 14 pins 14 pins 14 pins 14 pins 14 pins 14 pins

Diferensiator Kunci

  • K-series identification emphasizes improved ESD protection (vsLM324ADR)
  • Four independent amplifiers in a 14-pin SOIC (vsLM324ADG)
  • Broad supply capability for industrial interfaces (vsLM324ANSR)

Catatan Desain

Do not assume rail-to-rail input or output behavior. Before finalizing a single- or split-supply circuit, verify the input common-mode range and output swing at the actual supply voltage, especially when a sensor output can approach either rail. Also confirm that the selected replacement MPN has the same 14-pin pinout and that its offset, temperature, and ESD ratings satisfy the design rather than relying only on the LM324 family name.

Place the supply bypass capacitor close to pins 4 and 11, and keep each channel's input and feedback components close to its corresponding pins. Route output traces away from high-impedance input nodes to reduce capacitive feedthrough. The four amplifier sections share common power and ground pins, so adequate decoupling and a low-impedance ground plane are particularly important when several channels switch or drive appreciable loads simultaneously.

Estimated: amplifier dissipation is approximately equal to (V+ - VOUT) multiplied by output current for the relevant channel. For example, using a 30 V supply, a 12 V output, and 20 mA gives an estimated 0.36 W per active channel before accounting for the other internal dissipation. Use the manufacturer electrical and thermal limits for final design verification, and ensure the SOIC copper area and ambient temperature can dissipate the calculated load.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The verified product information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. The device is an industrial-temperature amplifier rather than an automotive-qualified option, so AEC-Q100 is recorded as not applicable.

Pencarian Terkait

LM324KADR datasheet LM324KADR datasheet pdf LM324KADR pinout LM324KADR specifications LM324KADR 14 pin SOIC LM324KADR 30V 1.2MHz Texas Instruments LM324KADR LM324KADR replacement LM324KADR equivalent LM324KADR vs LM324ADR LM324KADR price LM324KADR stock LM324KADR application circuit

Komponen dan Istilah Terkait

Texas Instruments LM324KADR LM324ADR LM324ADG LM324ADBR LM324KNSR LM324ANSR LM324K operational amplifier quad operational amplifier amplifier IC analog signal chain single-supply operation split-supply operation gain-bandwidth product input offset voltage common-mode input voltage power supply rejection ratio frequency compensation SOIC-14 surface mount industrial control sensor signal conditioning 4–20 mA current loop
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ