onsemi

LM324SNG - Quad Op-Amp 14-PDIP | onsemi | Single Supply

MPN: LM324SNG ✓ Aktif
3 V to 32 V Vdss 14-PDIP Package
MOQ: 1 |

LM324SNG Ringkasan

The onsemi LM324SNG is a low-cost quad operational amplifier with four independent, high-gain, internally frequency-compensated op amps in a 14-pin PDIP (dip-14) through-hole package. The LM324S is onsemi's version of the industry-standard LM324 family: single-supply quad operational amplifiers with true differential inputs, specified for operation from a single 3 V to 32 V supply or dual supplies up to ±16 V.

A quad operational amplifier is an analog IC that integrates four independent op amp circuits on one die, sharing the same supply pins while keeping inputs and outputs separate. In the amplifier hierarchy it sits as an amplifier IC > operational amplifier > general-purpose amplifier, forming the analog signal-conditioning backbone of power management, sensing, and control systems.

Key advantages of the LM324S family over standard op amps in single-supply applications include a common-mode input range that extends to the negative supply rail, which eliminates external biasing components in many designs, and outputs that can swing close to ground without a negative rail. The internally compensated amplifiers need no external frequency-compensation parts, simplifying BOM and layout.

The LM324S uses mature bipolar process technology, delivering stable, predictable behavior for low-frequency analog functions such as comparators, transducer amplifiers, DC gain blocks, and active filters. Typical parameters for the LM324 family include a gain-bandwidth product around 1 MHz and low supply current per amplifier, making it a workhorse for cost-driven designs rather than high-speed or precision applications.

Typical applications include transducer amplifier front ends in industrial sensing, DC gain blocks in power supplies and battery chargers, active RC filters in audio and control paths, and voltage comparator functions in household appliances and automotive accessories. The through-hole PDIP package suits prototyping, educational boards, and repair-driven industrial designs.

Design consideration: keep closed-loop gains modest and signal frequencies well below the gain-bandwidth limit, and provide an output pull-down resistor if you need the output to reach true ground under load.

This page adds value beyond the datasheet by synthesizing drop-in replacement options, application guidance, and sourcing information in one place.

Alternatif penggantian untuk LM324SNG — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian LM324SNG (sama faktor bentuk dan footprint) — berbeda di dalam Amplifier Type, Mounting Type, Gain-Bandwidth Product, Package, Input Offset Voltage.

Texas Instruments
Amplifier Type: Quad general-purpose operational amplifier
Mounting Type: Through-hole
Gain-Bandwidth Product: 1 MHz
Bandingkan dengan LM324SNG →
Texas Instruments
Amplifier Type: General-purpose operational amplifier
Mounting Type: Through-hole
Gain-Bandwidth Product: 1.2 MHz
Bandingkan dengan LM324SNG →
onsemi
Mounting Type: Through-hole
Gain-Bandwidth Product: 1 MHz
Input Offset Voltage: 3 mV
Bandingkan dengan LM324SNG →
onsemi
Amplifier Type: Single-supply quad operational amplifier with true differential inputs
Mounting Type: Surface mount
Gain-Bandwidth Product: 1 MHz
Bandingkan dengan LM324SNG →
Texas Instruments
Mounting Type: Through-hole
Package: 14-pin PDIP
Bandingkan dengan LM324SNG →

LM324ANG

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
onsemi
📦 14-PDIP
4 channels · Quad operational amplifier · 3 V to 32 V · 3 mV · 65 dB minimum · 1 MHz · True differential inputs · Commercial temperature grade

Kontak untuk harga

Lihat Datasheet →

LM324N

✅ Drop-In
Texas Instruments
📦 14-PDIP
4 independent amplifiers · Low-power quad operational amplifier · Standard general-purpose amplifier · High-gain, internally frequency-compensated amplifiers · Single-supply capable

Kontak untuk harga

Lihat Datasheet →

LM324AN

✅ Drop-In
Texas Instruments
📦 14-PDIP
General-purpose operational amplifier · 4 circuits · 4 outputs · 30 V · 1.2 MHz · 3 mV · Internally frequency-compensated · Single or dual supply

Kontak untuk harga

Lihat Datasheet →

LM2902N

✅ Drop-In
Texas Instruments
📦 14-PDIP
4 · 26 V · 1 MHz · Quad general-purpose operational amplifier · Independent, high-gain, internally frequency-compensated · Single-supply operation · 14-pin DIP · DIP-14

Kontak untuk harga

Lihat Datasheet →

LMC660AIN

✅ Drop-In
📦 14-PDIP
pin-for-pin compatible per TI, greater bandwidth and input resistance, CMOS process; supply range and output characteristics differ from bipolar LM324

📋 Alternatif referensi (tidak dalam katalog)

TL074N

✅ Drop-In
📦 14-PDIP
JFET-input quad op amp, same PDIP-14 pinout; higher bandwidth and lower input bias current, but narrower supply range and no negative-rail input common-mode - needs review for single-supply use

📋 Alternatif referensi (tidak dalam katalog)

LM324SNG Rating Maksimal & Karakteristik Listrik

Amplifier Type General Purpose Operational Amplifier
Number of Circuits 4
Supply Voltage (Single) 3 V to 32 V
Supply Voltage (Dual) ±1.5 V to ±16 V
Common-Mode Input Range Includes negative supply rail
Gain-Bandwidth Product 1 MHz (typical, LM324 family)
Paket 14-PDIP
Tipe Mounting Through Hole
Series LM324S / LM2902S

Konfigurasi Pin LM324SNG

DIP-14 Package Pinout Diagram DIP-14 14-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 DIP-14
Pin produk 1 OUT1 — Output of amplifier 1
Pin produk 2 IN1- — Inverting input of amplifier 1
Pin produk 3 IN1+ — Non-inverting input of amplifier 1
Pin produk 4 VCC — Positive supply voltage
Pin produk 5 IN2+ — Non-inverting input of amplifier 2
Pin produk 6 IN2- — Inverting input of amplifier 2
Pin produk 7 OUT2 — Output of amplifier 2
Pin produk 8 OUT3 — Output of amplifier 3
Pin produk 9 IN3- — Inverting input of amplifier 3
Pin produk 10 IN3+ — Non-inverting input of amplifier 3
Pin produk 11 VEE/GND — Negative supply or ground
Pin produk 12 IN4+ — Non-inverting input of amplifier 4
Pin produk 13 IN4- — Inverting input of amplifier 4
Pin produk 14 OUT4 — Output of amplifier 4

Aplikasi Umum

LM324SNG cocok untuk 6 aplikasis: Transducer Amplifier Front End, Power Supply Feedback and Monitoring, Active RC Filters, Household Appliance Control, Automotive Accessories, Educational and Prototype Analog Labs.

🏭

Transducer Amplifier Front End

In industrial sensing, the LM324SNG serves as a multichannel transducer amplifier: one amplifier per sensor channel (pressure, temperature, light) at low closed-loop gains of 10 to 100. Because its common-mode input range includes the negative rail, sensors referenced to ground can be read directly without biasing networks, which reduces component count and board area. The 3 V to 32 V supply range covers 5 V, 12 V, and 24 V industrial rails, letting a single design serve multiple systems. The roughly 1 MHz gain-bandwidth product comfortably handles slow physical variables, and the four amplifiers enable one package to condition a full sensor cluster, cutting cost per channel in cost-driven industrial equipment.

⚡

Power Supply Feedback and Monitoring

Linear and switching power supplies use the LM324SNG for output-voltage feedback amplification, current-limit sensing, and undervoltage/overvoltage monitoring. One package provides all four functions: an error amplifier around the reference, a differential current shunt amplifier, and two comparator-style threshold detectors. Operation from the supply's own 12 V or 24 V rail eliminates an auxiliary bias rail, and the input range to the negative rail allows ground-referenced shunt sensing on the low side. Since loop bandwidths here are far below the 1 MHz gain-bandwidth product, the internally compensated amplifiers remain stable without external compensation, which suits repairable, long-lifecycle industrial power hardware.

🎧

Active RC Filters

The LM324SNG implements Sallen-Key and multiple-feedback active filters for antialiasing, tone shaping, and noise limiting. A single PDIP-14 package realizes a complete fourth-order filter using all four amplifiers, such as two cascaded second-order low-pass sections at audio cutoff frequencies. The internally compensated design needs no external frequency-compensation parts, and the 3 V to 32 V supply range allows filtering on single-ended battery or logic rails. Keep cutoff frequencies modest relative to the approximately 1 MHz gain-bandwidth product so that Q remains accurate; at gains of one to ten and cutoffs in the tens of kilohertz, the filter response closely matches calculated values, making this a standard choice in appliance and audio conditioning stages.

🔧

Household Appliance Control

Appliance control boards use the LM324SNG for motor speed-error amplification, temperature threshold comparison, and user-interface signal conditioning on a single 12 V or 24 V rail. Its tolerance for large differential input voltages and its input range extending to the negative rail allow direct connection to ground-referenced thermistor dividers and current-sense resistors without protective biasing. The through-hole 14-PDIP package supports wave soldering and field repair, matching the service model of white-goods electronics. Because each amplifier draws modest supply current from the shared rail, a single package handles the whole analog control section, and the classic LM324 behavior keeps designs reproducible across long appliance production lifecycles.

🚗

Automotive Accessories

The onsemi datasheet lists automotive accessory applications for the LM324 family: battery-voltage supervision, indicator-lamp drivers, alternator charge monitoring, and sensor conditioning in non-safety-critical accessory circuits. The wide 3 V to 32 V supply range absorbs automotive load-dump-adjacent conditions when paired with upstream protection, and each amplifier's output can source current to drive indicator LEDs with a series resistor. Four amplifiers in one package consolidate dashboard logic, reducing component count on cost-sensitive accessory boards. For production designs, validate temperature grading and consider the automotive-qualified LM2902 family variant where AEC-grade qualification is mandated by the platform requirements.

🖥️

Educational and Prototype Analog Labs

The LM324SNG's through-hole PDIP-14 package and forgiving LM324-class behavior make it a staple of breadboard labs and educational analog courses. Students can build oscillators, comparators, summing amplifiers, and filters on 0.1-inch pitch without surface-mount tooling, powered from a single 9 V battery or bench supply within the 3 V to 32 V range. Internally compensated amplifiers tolerate wiring mistakes that would destabilize uncompensated devices, and the industry-standard pinout means the same lab exercises transfer directly to TI LM324N and LM2902 devices. This ubiquity also makes the part an ideal first-choice stock item for repair benches and maker inventories.

What is the LM324SNG?
The LM324SNG is onsemi's low-cost quad operational amplifier in a 14-pin PDIP through-hole package. It contains four independent, internally frequency-compensated op amps with true differential inputs, designed for single-supply operation from 3 V to 32 V (or dual supplies up to ±16 V). According to the onsemi datasheet, its common-mode input range includes the negative supply, eliminating external biasing components in many single-supply applications.
What is the supply voltage range of the LM324SNG?
The LM324SNG operates from a single supply of 3 V to 32 V, or from dual supplies of up to ±16 V, per the onsemi LM324S datasheet. This wide range lets the same device run from 5 V logic rails, 12 V or 24 V industrial buses, and ±15 V analog rails, which is a major reason the LM324 family has remained a general-purpose standard for decades.
Can the LM324SNG be used as a comparator?
Yes, the LM324SNG can function as a comparator, and the onsemi datasheet lists voltage comparison among its typical applications. The differential input stage tolerates large input differential voltages, and the output swings toward the negative rail when the inputs reverse. For production comparator duties at higher speed or defined logic levels, a dedicated comparator IC generally gives faster response and cleaner switching than this 1 MHz-class op amp.
What is the difference between LM324SNG and LM324N?
The LM324SNG (onsemi) and LM324N (Texas Instruments) are functionally equivalent quad op amps in the same 14-pin PDIP package with the same pinout. The 'S' suffix in the onsemi part number denotes the LM324S/LM2902S low-power family variant from onsemi. Differences are primarily manufacturer-specific test and compliance flows rather than the pinout or topology, so either part drives the same footprint; verify the exact suffix and compliance status against each manufacturer's datasheet before interchanging in production.
What is the best drop-in replacement for the LM324SNG?
The best drop-in replacements for the LM324SNG are the onsemi LM324ANG (same brand, same 14-pin PDIP quad op amp family) and the Texas Instruments LM324N, which is pin-for-pin compatible in PDIP-14. For improved performance on the same footprint, TI's LMC660 is documented as pin-for-pin compatible with the LM324 and offers greater bandwidth and input impedance, per TI's LMC660 documentation. All of these mount directly on the same PDIP-14 land pattern without PCB rework.
Can LMC660 replace LM324SNG?
Yes. According to Texas Instruments documentation and widely cited engineering references, the LMC660 is pin-for-pin compatible with the LM324 and offers greater bandwidth and input resistance, improving performance in many existing single-supply applications. Since the LM324SNG shares the standard LM324 PDIP-14 pinout, the LMC660 in the same 14-pin DIP package drops directly onto the same board. Review input voltage range and supply current differences in the LMC660 datasheet before finalizing the substitution.
What can replace the LM324SNG in a single-supply design?
For single-supply quad op amp designs, direct 14-pin PDIP replacements include the onsemi LM324ANG, the Texas Instruments LM324N, and the STMicroelectronics LM2902N quad op amp, all sharing the LM324 pinout. The LM2902 variant is typically graded as a functional alternative that should be validated on your board for production use. For higher performance on the same footprint, the TI LMC660 adds bandwidth and input impedance. Always confirm supply range, offset, and output swing against your circuit conditions.
What is the best Texas Instruments equivalent for the LM324SNG?
The best Texas Instruments equivalent for the onsemi LM324SNG is the LM324N (also sold as LM324N/NOPB), a quad operational amplifier in a 14-pin PDIP package with the identical LM324 pinout and 3 V to 32 V single-supply range. TI additionally offers the LM324A (tighter offset grading) and the LM324B enhanced version in the same family. For through-hole designs needing the exact same footprint, the LM324N is the standard cross-brand drop-in choice.
When should I choose the LM324SNG over a modern rail-to-rail op amp?
Choose the LM324SNG when cost, availability, through-hole packaging, and proven single-supply behavior matter more than precision or bandwidth. It suits DC gain blocks, slow comparators, transducer amplifiers, and repair/legacy designs where the classic LM324 behavior is expected. Choose a modern rail-to-rail CMOS quad instead when you need output swing to true ground under load, sub-millivolt offset, higher bandwidth, or low supply current at 3 V operation - the LM324's output does not reach ground without a pull-down.
Where can I download the LM324SNG datasheet PDF?
The LM324SNG datasheet PDF is available from onsemi's official documentation and through datasheet archives; an 8-page onsemi datasheet covering the LM324S/LM2902S single-supply quad operational amplifiers is accessible via the datasheet link on this page. For the most current revision, always prefer the PDF hosted on onsemi.com, since third-party mirror sites may hold superseded versions. Request a Quote on this page if you need help sourcing the document or the part itself.
Where can I find the LM324SNG pinout?
The LM324SNG pinout is printed in the onsemi datasheet's connection diagram for the 14-pin PDIP package. In brief: each amplifier has its inverting input, non-inverting input, and output on dedicated pins (amplifier 1: pins 2, 3, 1; amplifier 2: pins 6, 5, 7; amplifier 3: pins 9, 10, 8; amplifier 4: pins 13, 12, 14), with the shared positive supply on pin 4 and the negative rail/ground on pin 11. The pin diagram on this page shows the full assignment.
Is the LM324SNG suitable for audio applications?
Yes, the LM324SNG can be used for audio, and the onsemi datasheet's typical applications include active filters and AC amplifiers. However, the LM324 family's crossover distortion in the output stage and roughly 1 MHz gain-bandwidth product limit its fidelity in demanding audio paths. It works well for tone control, mixing at modest gains, and low-frequency filtering. For high-quality audio signal paths, consider audio-specialized quads such as the TL074 family, which trades some single-supply range for lower distortion.
What are the key specifications of the LM324SNG engineers should know?
The LM324SNG is a four-channel general-purpose op amp in 14-PDIP from onsemi, operating from 3 V to 32 V single supply or ±16 V dual supply. Its common-mode input range includes the negative rail; the internally compensated amplifiers need no external compensation; the LM324-class gain-bandwidth product is about 1 MHz. Output swing approaches but does not reach ground without a pull-down. According to onsemi datasheet documentation for the LM324S/LM2902S family, these characteristics target low-cost single-supply industrial, automotive accessory, and appliance signal-conditioning designs.
How much does the LM324SNG cost and where can I buy it?
The LM324SNG is a low-cost, widely stocked general-purpose quad op amp; XAIPART fulfills it through the Request a Quote form on this page, which returns current pricing, stock, and lead time directly rather than displaying numbers that go stale. Distributors list it as an active catalog item in 14-PDIP through-hole packaging. For volume requirements, request quantity pricing through the same form and XAIPART will respond with tiered quotes and delivery options.
Is the LM324SNG still in production and RoHS compliant?
The LM324SNG is listed as an active catalog product by onsemi and remains stocked by authorized distributors, so it is still in production. RoHS and REACH compliance for this exact suffix should be confirmed on the onsemi product page or the manufacturer's material declaration, since compliance can vary between the LM324 family suffixes (for example, legacy non-'G' parts may carry different statuses). Check the compliance documentation linked from this page before releasing the part into a new RoHS-regulated design.

Data referensi engineering untuk LM324SNG — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the LM324SNG when your design is a cost-driven, single-supply analog section operating from 3 V to 32 V, packaged in through-hole PDIP-14 for prototyping, education, or field-serviceable industrial and appliance hardware. It excels at DC gain blocks, slow transducer amplification, active filters below roughly 100 kHz, and undemanding comparator duties where all four amplifiers in one package save cost. Choose the onsemi LM324ANG or TI LM324N for identical through-hole roles when suffix grading or compliance flow matters. Choose the LMC660AIN when you want more bandwidth and CMOS rail-to-rail inputs on the same footprint. Choose the TL074N only for dual-supply, higher-fidelity audio paths, and the LM2902N where automotive temperature grading is needed. Avoid the LM324SNG when the output must reach true ground under load or when sub-millivolt precision is required.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini LM324ANG LM324N LM2902N LMC660AIN TL074N
Package 14-PDIP 14-PDIP - same 14-PDIP - same 14-PDIP - same 14-PDIP - same 14-PDIP - same
Brand onsemi onsemi Texas Instruments STMicroelectronics Texas Instruments Texas Instruments
Number of Amplifiers 4 4 4 4 4 4
Supply Voltage (Single) 3 V to 32 V 3 V to 32 V 3 V to 32 V 3 V to 32 V (family) 3 V to 16 V Requires dual supply (±3.5 V to ±18 V typical)
Input Common-Mode Includes Negative Rail Yes Yes Yes Yes Yes (rail-to-rail input) No (JFET input range)
Gain-Bandwidth Product 1 MHz (typical, LM324 family) 1 MHz (typical) 1 MHz (typical) 1 MHz (typical) 1.5 MHz (typical, CMOS) 3 MHz (typical)
Input Offset Voltage Grading LM324S family grade Standard LM324 grade Standard grade (LM324A = tighter) LM2902 grade CMOS grade, tighter typical JFET grade, tighter typical
Input Technology Bipolar Bipolar Bipolar Bipolar CMOS JFET

Diferensiator Kunci

  • Through-hole 14-PDIP packaging for serviceable designs (vsMC3403DR)
  • Proven single-supply input range to the negative rail (vsTL074N)
  • Low-cost four-channel consolidation (vsLMC660AIN)

Catatan Desain

The LM324 output stage cannot swing to the negative rail under load; it typically saturates a fraction of a volt above VEE/GND and exhibits crossover behavior near that point. If your circuit requires the output to reach true ground (for example, driving an ADC input at 0 V or a single-supply rectifier), add a pull-down resistor of roughly 2 kOhm to 10 kOhm from the output to ground, or select a rail-to-rail-output device. Ignoring this is the single most common LM324 design mistake in single-supply comparator and zero-referenced amplifier roles.

Keep each amplifier's closed-loop bandwidth comfortably below the approximately 1 MHz gain-bandwidth product. At a gain of 10, closed-loop bandwidth is roughly 100 kHz, so reserve the device for audio-range and DC applications. Because all four amplifiers share one die and one supply pair, ground and supply impedance couple channels; use a solid ground plane or heavy ground traces, place a 0.1 uF ceramic capacitor close to pin 4 with a 10 uF bulk capacitor nearby, and keep high-gain input traces short and away from output routing to prevent inter-channel crosstalk.

For breadboarding and prototypes, the PDIP-14 package inserts directly into 0.1-inch sockets and perfboards. For production, remember through-hole assembly adds drill cost versus a surface-mount quad such as the MC3403DR (SOIC-14 footprint) - keep LM324SNG on the BOM only where through-hole serviceability is a genuine requirement. When substituting pin-compatible parts (LM324N, LM2902N, LMC660), the socketed layout needs no changes, which makes socketing the DIP footprint a low-risk way to preserve substitution flexibility during bring-up.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

RoHS/REACH and lead-free status for the exact LM324SNG suffix were not stated in the retrieved catalog snippets; confirm on the onsemi product page material declaration. The 'G' suffix in onsemi part numbering generally denotes the RoHS-compliant, lead-bent variant of the legacy LM324N, but official declaration governs.

Data disahkan pada: 2026-11-08 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

LM324SNG datasheet LM324SNG datasheet pdf LM324SNG pinout LM324SNG equivalent LM324SNG replacement LM324SNG vs LM324N onsemi LM324SNG LM324 quad op amp PDIP-14 LM324 cross reference LM324SNG price stock single supply quad operational amplifier 3V 32V LM324 application circuit single supply

Komponen dan Istilah Terkait

onsemi LM324SNG LM324 LM324N LM324ANG LM2902N LMC660 TL074N Texas Instruments STMicroelectronics operational amplifier quad op amp amplifier IC single-supply operation gain-bandwidth product common-mode input range 14-PDIP PDIP package family through-hole mounting RoHS transducer amplifier active filter voltage comparator internally compensated amplifier
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ