Texas Instruments

LM339LVRTER - Quad 5.5V Comparator | Texas Instruments

MPN: LM339LVRTER ✓ Aktif
1.65 V to 5.5 V Vdss 35 µA maximum per channel Id 16-WQFN (3 x 3 mm, RTE) Package
MOQ: 1 |

LM339LVRTER Ringkasan

The Texas Instruments LM339LVRTER is a four-channel voltage comparator designed for low-voltage operation from 1.65 V to 5.5 V. Each channel provides rail-to-rail input capability, an open-collector output, and a typical propagation delay of 600 ns, with a nominal 1 µs device-level delay class. The IC is packaged in a 16-WQFN 3 x 3 mm RTE package and is rated for operation from -40 °C to 125 °C.

A voltage comparator is an analog integrated circuit that compares two input voltages and changes its output state when the non-inverting input rises above the inverting input, or vice versa. Comparators belong to the broader integrated-circuit hierarchy and are used to implement threshold detection, level translation, signal conditioning, overvoltage detection, and autonomous system decisions. The LM339LV belongs to the low-voltage comparator family and is intended to replace standard LM339-family devices in low-voltage systems where rail-to-rail input operation improves usable signal range.

Four independent channels allow one device to implement several comparison functions without using separate single-channel packages. The 1.65 V to 5.5 V supply range supports low-voltage portable, embedded, industrial-control, and mixed-signal systems. Rail-to-rail input behavior permits sensing signals near either supply rail, while the open-collector outputs provide flexible interface options when paired with suitable pull-up resistors. Maximum quiescent current is 35 µA per channel.

The open-collector architecture requires an external pull-up resistor on each output node. This arrangement allows wired-open logic, level translation to another supply voltage, and direct interfacing with open-drain-compatible devices. Because the output transistor can sink current but cannot actively drive a supply rail, output rise time depends on the pull-up resistance, total bus capacitance, and leakage from connected devices. System designers should not substitute a push-pull output without rechecking downstream logic compatibility.

Typical uses include battery-powered threshold detection, sensor signal conditioning, overvoltage and undervoltage monitoring, industrial control logic, and four-channel level translation. The quad organization is especially useful when a system compares several rails or sensor thresholds against independent references. Input offset, common-mode behavior, response delay, and output leakage should be considered when setting switching thresholds or designing hysteresis.

For reliable operation, place the pull-up resistor close to the output node and route comparator inputs away from switching-node and high-current paths. The small WQFN package benefits from careful assembly practices and adequate PCB copper, although exposed-pad thermal requirements depend on ambient temperature and dissipation. Confirm the manufacturer pin description table before assigning signals because the public result excerpts do not reproduce every terminal name.

This product page consolidates the key electrical ratings, package information, application guidance, and replacement considerations for LM339LVRTER. It also distinguishes true drop-in options from comparators that differ in channel count, package, output architecture, or supply rating, helping engineers make a board-level decision without assuming that every similarly named LM339 device is interchangeable.

Alternatif penggantian untuk LM339LVRTER — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Tidak ada alternatif pengganti yang tersedia untuk produk ini.

Permintaan Alternatif

LM339LVRTER Rating Maksimal & Karakteristik Listrik

Comparator Type General-purpose voltage comparator
Number of Channels 4 channels
Supply Voltage Range 1.65 V to 5.5 V
Maximum Supply Voltage 5.5 V
Input Common-Mode Range Rail-to-rail
Tipe Output Open-collector
Propagation Delay 600 ns typical
Device-Level Propagation Delay 1 µs
Arus Memerintah 35 µA maximum per channel
Rentang Suhu Kerja -40 °C to 125 °C
Paket 16-WQFN (3 x 3 mm, RTE)
Jumlah Pin 16 pins
Tipe Mounting Surface mount
ESD Protection Integrated ESD protection

LM339LVRTER 16-wqfn (3 x 3 mm, rte) Diamant Konfigurasi Panduan

Konfigurasi pin untuk LM339LVRTER (16-wqfn (3 x 3 mm, rte) pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.

Diamant diagram pakai pakai 16-wqfn (3 x 3 mm, rte) untuk LM339LVRTER

Tidak ada data diatribut pin yang tersedia untuk LM339LVRTER.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

LM339LVRTER cocok untuk 6 aplikasis: Battery-Powered Threshold Detection, Industrial Sensor Signal Conditioning, Power-Rail Supervision, Open-Drain Level Translation, Portable Medical and Wearable Electronics, Automotive and Transportation Control.

⚡

Battery-Powered Threshold Detection

The LM339LVRTER fits battery-powered sensing because its four channels operate from 1.65 V to 5.5 V and consume no more than 35 µA quiescent current per channel. A resistor divider can establish a reference for each inverting input, while the other input receives a battery, sensor, or divider-derived voltage. Rail-to-rail input operation is valuable when the monitored signal approaches either supply rail. Because the outputs are open-collector, each node requires a pull-up resistor selected to balance low current consumption against the required logic rise time. Four threshold detectors can therefore be implemented with one compact IC, reducing component count while preserving independent reference points and switching behavior.

🏭

Industrial Sensor Signal Conditioning

The LM339LVRTER can convert slowly changing sensor signals into decisive digital transitions for an industrial controller. Its rail-to-rail inputs allow a divided sensor signal to be compared with a local threshold over most of the 1.65 V to 5.5 V supply range, while the 600 ns typical propagation delay is suitable for many measurement and interlock functions. The open-collector output can feed a controller input through a suitable pull-up or support a wired-open alarm network. Engineers should add hysteresis around the threshold to prevent chatter from sensor noise and should route sensitive input traces away from motors, relays, and switching power stages.

🔧

Power-Rail Supervision

Four independent LM339LVRTER channels can supervise multiple low-voltage rails against resistor-derived reference points. The device compares divided rail voltages with references and reports faults through open-collector outputs, allowing pull-ups to the monitored logic level. Its 1.65 V to 5.5 V operating range covers common portable and embedded supply domains, and the -40 °C to 125 °C rating supports industrial equipment. The design must account for input offset and resistor tolerances when defining trip points. Use separate pull-up supplies when the monitored outputs connect to a domain different from the comparator supply, and verify that every output remains within its external logic-level limits during startup.

🌐

Open-Drain Level Translation

The LM339LVRTER open-collector outputs allow a low-voltage domain to drive a higher-voltage logic domain by placing the pull-up resistor on the higher rail. The comparator supply can remain at 1.65 V to 5.5 V while each output transistor sinks current from the external pull-up node. This arrangement is useful for translating fault, ready, or threshold signals between systems with different voltage levels. It is not a high-speed bidirectional translator, so rise time must be checked against bus capacitance and leakage. Pull-up resistance should also be chosen so that the maximum sink-current capability of the output is not exceeded under the worst-case logic-low voltage.

💊

Portable Medical and Wearable Electronics

The LM339LVRTER can support low-voltage monitoring in portable medical, wearable, and personal-health devices where four compact sensing channels are useful. The 1.65 V to 5.5 V supply range accommodates small battery systems, while the rail-to-rail inputs improve threshold coverage near the rail limits. Four comparisons can evaluate battery status, sensor thresholds, charge-state signals, or safety-related limits. Because this is a general-purpose comparator rather than a medical-qualified device, system designers must evaluate the complete signal chain for the intended risk classification. Low quiescent current helps conserve battery capacity, while open-collector outputs allow pull-ups to a local low-voltage rail or an appropriate interface domain.

🚗

Automotive and Transportation Control

The LM339LVRTER can evaluate multiple low-voltage signals in transportation electronics where its -40 °C to 125 °C operating range is useful. Four channels can monitor redundant sensor lines, discrete control signals, or supply-derived thresholds. Rail-to-rail inputs support low-voltage signal chains, and open-collector outputs suit wired-open interfaces used in vehicle electrical systems. The exact LM339LVRTER ordering option is not identified as an AEC-Q100-qualified variant, so it should not be treated as automotive-grade merely because of its temperature range. Vehicle-system qualification, transient protection, fault tolerance, and electromagnetic compatibility must be assessed at the application level.

Ringkasan Produk Direkomendasikan

LM393LV Low-voltage comparator family option for dual-channel monitoring Digunakan di dalam: Battery-Powered Threshold Detection, Power-Rail Supervision, Open-Drain Level Translation, Portable Medical and Wearable Electronics, Automotive and Transportation Control TL391LV Low-voltage dual comparator family option Digunakan di dalam: Battery-Powered Threshold Detection, Industrial Sensor Signal Conditioning, Power-Rail Supervision, Automotive and Transportation Control TL331LV Single-channel low-voltage comparator family option Digunakan di dalam: Industrial Sensor Signal Conditioning, Open-Drain Level Translation, Portable Medical and Wearable Electronics
What are the key specifications of LM339LVRTER that engineers should know?
The LM339LVRTER is a four-channel, general-purpose comparator operating from 1.65 V to 5.5 V. It has rail-to-rail inputs, open-collector outputs, 600 ns typical propagation delay, and a maximum quiescent current of 35 µA per channel. According to the Texas Instruments LM339LV datasheet, the device uses a 16-WQFN RTE package and is rated from -40 °C to 125 °C. These characteristics make it suitable for low-voltage threshold detection, sensing, level translation, and embedded control systems.
Where can I download the LM339LVRTER datasheet PDF?
The official LM339LV datasheet is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/lm339lv.pdf. It covers the LM339LV quad comparator, including its low-voltage operation, rail-to-rail inputs, electrical characteristics, pin configuration, and application information. The TI product page at https://www.ti.com/product/LM339LV provides ordering information and links to additional technical resources. Use the pin-description table in the manufacturer datasheet when assigning connections or checking exposed-pad requirements.
Where can I find the LM339LVRTER pinout?
The LM339LVRTER pinout is shown in the Texas Instruments LM339LV datasheet under the package information and pin-configuration sections. The device has 16 terminals in the 3 x 3 mm RTE WQFN package. Because the public product excerpts do not reproduce the complete terminal table, no terminal numbers or names should be inferred from a generic LM339 diagram. Use the manufacturer drawing to confirm each comparator input, output, supply, ground, and exposed-pad connection before laying out the PCB.
Is LM339LVRTER suitable for low-voltage battery systems?
Yes, LM339LVRTER is suitable for low-voltage battery-powered systems because its specified supply range is 1.65 V to 5.5 V and its maximum quiescent current is 35 µA per channel. According to the Texas Instruments datasheet, the rail-to-rail inputs also allow comparisons near the supply limits. The open-collector outputs need pull-up resistors, whose current should be checked against the available battery power and required output speed.
How does the LM339LVRTER open-collector output work?
Each LM339LVRTER output uses an open-collector transistor that can pull its output node toward ground but cannot actively drive the node high. A pull-up resistor is required to establish the high state. According to the Texas Instruments LM339LV datasheet, this architecture supports wired-open logic and level translation to another voltage domain. Choose the pull-up value to balance output rise time against power consumption, and account for capacitance and leakage from all devices attached to the output node.
What is the propagation delay of LM339LVRTER?
The LM339LVRTER has a propagation delay of 600 ns typical, while Texas Instruments describes the LM339LV as a comparator with a 1 µs delay class. According to the manufacturer datasheet, the exact limits and test conditions should be used when designing timing margins. The delay is important in oscillator, pulse-width detection, and fast threshold applications where input crossing direction and overdrive can affect observed response time.
What is the best drop-in replacement for LM339LVRTER?
No verified drop-in replacement was identified for LM339LVRTER in the current component cross-reference results. A valid replacement must retain the 16-WQFN RTE footprint, four-channel organization, 1.65 V to 5.5 V supply range, rail-to-rail input behavior, open-collector output, and compatible terminal assignment. Use the Request a Quote form on this page to discuss replacement sourcing, and require a manufacturer pin-for-pin comparison before approving any substitute.
Can LM339LVRTER be replaced by a generic LM339 device?
A generic LM339 should not be treated as a drop-in replacement for LM339LVRTER without a complete package, pinout, and electrical comparison. The LM339LVRTER is specified for 1.65 V to 5.5 V operation, rail-to-rail inputs, and a 16-WQFN RTE package, while generic LM339 devices may use different voltage ratings, input ranges, packages, or output timing. According to the Texas Instruments LM339LV documentation, the LV family is designed for low-voltage drop-in use within specified applications, but package and pin compatibility must still be confirmed.
When should I choose LM339LVRTER instead of a dual or single comparator?
Choose LM339LVRTER when the design needs four independent comparisons in one low-voltage package. Its four channels can reduce board area and component count when monitoring several sensor thresholds, rails, or logic levels. A dual comparator may be preferable when only two channels are required because it can simplify routing or provide a smaller functional block. A single comparator is appropriate when one threshold function dominates the design and unused package area would be wasteful.
What is the difference between LM339LVRTER and LM339LV?
LM339LVRTER is the specific orderable 16-WQFN RTE package for the Texas Instruments LM339LV quad-comparator family; LM339LV is the family name. According to the TI product page, the RTE orderable variant provides four channels, a 5.5 V maximum supply rating, 1 µs delay class, and operation from -40 °C to 125 °C. Other LM339LV package or suffix options may differ in temperature grade, reel format, or ordering code, so the full ordering suffix must be checked.
Where to buy LM339LVRTER online?
Use the Request a Quote form on this page to request LM339LVRTER availability, current pricing, and the required delivery quantity. The form is the direct route for quote-based sourcing and avoids presenting stale pricing. For design review, confirm that the quoted part is the complete LM339LVRTER orderable designation rather than LM339LV or a generic LM339 with a different package suffix. Lead time and stock should be confirmed for the quantity and date required by the build schedule.
What is the price of LM339LVRTER?
The current price for LM339LVRTER is obtained through the Request a Quote form on this page. Pricing depends on order quantity, package suffix, delivery date, and current component conditions, so a static price figure can become inaccurate. Submit the required quantity and target date with the quote request to receive current commercial terms. The structured quote workflow also helps distinguish the exact 16-WQFN RTE orderable part from other LM339-family variants.
What is the lead time for LM339LVRTER?
The current lead time for LM339LVRTER should be requested through the Request a Quote form on this page. Lead time depends on the quantity ordered, scheduled delivery date, and market conditions at the time of quotation. Include the required reel quantity, acceptable partial shipment policy, and target production date. Confirm that the response identifies the full LM339LVRTER orderable number and the 16-WQFN RTE package.
Is LM339LVRTER in stock?
Current LM339LVRTER stock should be confirmed through the Request a Quote form on this page. Inventory can vary with order quantity and delivery date, so a general availability statement does not guarantee material for a production schedule. Include your required quantity, shipment schedule, and packaging preferences with the request. The quote team can then confirm current availability and the expected lead time for the exact part.
What is the best Texas Instruments equivalent for LM339LVRTER?
The closest Texas Instruments family referenced for low-voltage drop-in use is LM339LV, but the exact orderable suffix must still match the required footprint and temperature grade. According to the manufacturer datasheet, the LV family can replace standard LM339-family comparators in low-voltage applications while adding rail-to-rail input capability. LM339LVRTER already denotes the 16-WQFN RTE member, so merely naming the family does not establish that another orderable variant is interchangeable.
How do I design a robust threshold detector with LM339LVRTER?
Apply the signal to either the inverting or non-inverting input and establish the switching threshold at the other input with a resistor divider or precision reference. According to the Texas Instruments datasheet, the family also supports resistor-based reference arrangements. Add intentional hysteresis to prevent repeated output transitions when the input noise approaches the threshold, and select the pull-up resistor to meet the required rise time without excessive supply current.

Data referensi engineering untuk LM339LVRTER — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose LM339LVRTER when a low-voltage system needs four independent comparisons, rail-to-rail input coverage, and open-collector outputs in a 16-WQFN package. It is particularly suitable for multiple threshold monitors, sensor conditioning, open-drain alarms, and level translation between compact logic domains. Use LM393LV when only two channels are required, and TL391LV when a dual-channel comparator from the same low-voltage family better fits the board arrangement. A single-channel option may be more efficient when the design contains only one threshold function. Do not approve a generic LM339 substitute without checking package dimensions, terminal assignment, supply range, input common-mode limits, propagation delay, output sink current, and exposed-pad requirements. For automotive production, verify that the exact ordering option satisfies the required qualification and environmental standards rather than inferring qualification from temperature rating alone.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini
Brand Texas Instruments
Package 16-WQFN (3 x 3 mm, RTE)
Number of Channels 4 channels
Supply Voltage Range 1.65 V to 5.5 V
Maximum Supply Voltage 5.5 V
Input Common-Mode Range Rail-to-rail
Output Type Open-collector
Propagation Delay 600 ns typical
Quiescent Current 35 µA maximum per channel
Operating Temperature Range -40 °C to 125 °C

Diferensiator Kunci

  • Four independent channels in a compact low-voltage package (vsLM393LV)
  • Low-voltage operation with rail-to-rail inputs (vsStandard LM339 family devices)
  • Flexible open-collector output interface (vsPush-pull comparator families)

Catatan Desain

Treat the LM339LVRTER as a mixed-signal component even though its function is simple. Keep the four comparator input nets short and position their reference dividers close to the associated inputs. Route inputs away from switching nodes, relay contacts, inductors, and high-current return paths. A solid ground plane reduces sensitivity to common-mode disturbance, while avoiding input traces directly beneath the switching stage can prevent induced threshold errors.

Do not assume an open-collector output can source current. Every output requires a pull-up resistor, and its high level equals the pull-up supply rather than the comparator supply. Confirm the external pull-up voltage remains within the limits of every connected device. Also account for input offset and resistor tolerances when defining trip points; add positive feedback for hysteresis when the compared signal may cross the threshold slowly or contain noise.

Place output pull-up resistors close to the LM339LVRTER pins to minimize the duration of the high-impedance output state and reduce susceptibility to capacitive coupling and leakage. Select resistance from the required rise time, total node capacitance, and available sink-current budget rather than choosing solely for low power. The manufacturer package drawing should be followed for the exposed-pad connection and land pattern, and assembly should maintain the specified solder and moisture-handling controls.

Rail-to-rail input capability does not eliminate EMI sensitivity. If a comparator detects a fast sensor or switching signal, keep the input path compact and consider a small series resistor with input filtering at the pin. Hysteresis must remain larger than the filtered input noise while still meeting the required trip-point accuracy. Validate the complete circuit with conducted and radiated emissions measurements when it operates beside switching power converters or motor drivers.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The current product excerpts do not state the compliance status of the exact LM339LVRTER ordering option. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status must be confirmed from the manufacturer product page or declaration before qualification.

Pencarian Terkait

LM339LVRTER datasheet LM339LVRTER pinout LM339LVRTER datasheet pdf LM339LVRTER equivalent LM339LVRTER replacement LM339LVRTER drop-in substitute LM339LVRTER price LM339LVRTER stock Texas Instruments LM339LVRTER LM339LVRTER WQFN comparator LM339LVRTER rail-to-rail comparator LM339LVRTER application circuit LM339LVRTER vs LM393LV LM339LVRTER footprint

Komponen dan Istilah Terkait

Texas Instruments LM339LVRTER LM339LV LM393LV TL331LV TL391LV voltage comparator quad comparator logic integrated circuit analog integrated circuit semiconductor rail-to-rail input open-collector output open-drain logic propagation delay quiescent current input offset voltage common-mode voltage range 16-WQFN RTE package WQFN family surface-mount package low-voltage operation threshold detection sensor signal conditioning level translation
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ