LM393ADGKRG4 - Dual Open-Collector Comparator | Texas Instruments
MPN: LM393ADGKRG4 ✓ AktifLM393ADGKRG4 Ringkasan
An analog comparator is an interface IC that compares two input voltages and produces a logic-level indication of their relationship. The LM393 belongs to the comparator hierarchy within analog and mixed-signal semiconductors. Unlike a digital logic gate, the comparator evaluates continuously varying analog voltages, while its open-collector output provides a flexible interface to pull-up-based digital systems, relay drivers, and open-collector buses.
The two LM393ADGKRG4 channels operate independently, allowing one device to implement two threshold functions. Its open-collector outputs can sink current from an external pull-up and can be left unconnected when unused. The broad 2 V to 36 V supply range supports low-voltage logic systems as well as higher-voltage industrial and instrumentation circuits, while the 8-VSSOP surface-mount package supports compact PCB layouts.
Common-mode input behavior is an important architectural feature of the LM393 family. The manufacturer identifies the device as rail-to-rail, allowing the input voltages to approach the supply rails under supported operating conditions. The open-collector architecture is particularly useful when the output must drive a pull-up to a different voltage domain, participate in wired-AND logic, or control a downstream stage without an integrated push-pull output driver.
Typical uses include battery-threshold detection, sensor signal conditioning, overvoltage and undervoltage supervision, window comparators, industrial control interfaces, and logic-level translation between voltage domains. Two independent channels can monitor a pair of limits, compare a sensor signal against a reference, or provide separate comparator functions with the same device.
When designing the circuit, select an external pull-up resistor for each open-collector output and account for its maximum sink current, output voltage, and switching speed. Keep input and output paths away from high-current switching nodes, use a stable reference for precise thresholds, and verify the complete design against the manufacturer datasheet’s input common-mode, supply, output-current, and absolute-maximum-rating limits.
This page consolidates the verified LM393ADGKRG4 package and supply information with pin-level implementation guidance, application examples, and same-package replacement comparisons. It helps engineers identify the correct footprint, understand the open-collector interface, and assess whether a candidate alternative preserves both the 8-VSSOP layout and the LM393’s core operating characteristics.
Alternatif penggantian untuk LM393ADGKRG4 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian LM393ADGKRG4 (sama faktor bentuk dan footprint) — berbeda di dalam Comparator Type, Number of Channels, Output Type, Package.
LM393ADGKR
✅ Drop-InKontak untuk harga
Lihat Datasheet →LM293ADGKR
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
LM393DGK
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
LM393DGKR
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →LM393ADGKT
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
LM393ADGKRG4 Rating Maksimal & Karakteristik Listrik
| Comparator Type | Dual differential general-purpose comparator |
| Number of Channels | 2 channels |
| Supply Voltage Range | 2 V to 36 V |
| Split-Supply Range | ±1 V to ±18 V |
| Tipe Output | Open-collector |
| Input Common-Mode Range | Rail-to-rail |
| Paket | 8-VSSOP |
| Package Family | VSSOP family |
| Tipe Mounting | Surface mount |
| Lead Pitch | 0.118 in (3.00 mm) |
| Supply Configuration | Single supply or split supply |
Konfigurasi Pin LM393ADGKRG4
| Pin produk 1 | OUT1 — Comparator 1 open-collector output |
| Pin produk 2 | IN1- — Comparator 1 inverting input |
| Pin produk 3 | IN1+ — Comparator 1 noninverting input |
| Pin produk 4 | GND — Ground connection |
| Pin produk 5 | IN2+ — Comparator 2 noninverting input |
| Pin produk 6 | IN2- — Comparator 2 inverting input |
| Pin produk 7 | OUT2 — Comparator 2 open-collector output |
| Pin produk 8 | VCC — Positive supply connection |
Aplikasi Umum
LM393ADGKRG4 cocok untuk 6 aplikasis: Industrial Sensor Threshold Detection, Battery Overvoltage and Undervoltage Monitoring, Window Comparator for Signal Qualification, Open-Collector Logic Level Translation, Automotive and Heavy Equipment Control Interfaces, Portable and Battery-Powered Monitoring.
Industrial Sensor Threshold Detection
The LM393ADGKRG4 suits industrial sensor interfaces where a changing analog signal must be converted into a digital state. Its two independent differential channels can compare a sensor output with a reference or monitor two separate limits. The 2 V to 36 V supply range accommodates 3.3 V, 5 V, 12 V, and higher industrial rails, while the rail-to-rail input behavior supports thresholds near the supply rails. Use one channel for an upper threshold and the other for a lower threshold, adding positive feedback for hysteresis. The open-collector outputs can pull up to the voltage required by a controller input, although the external pull-up and the comparator’s sink-current limit must be selected together.
Direkomendasikan
Battery Overvoltage and Undervoltage Monitoring
The LM393ADGKRG4 can implement dual battery-limit monitoring by assigning one comparator to an overvoltage threshold and the other to an undervoltage threshold. The 2 V to 36 V operating range is useful for low-voltage cells and multi-cell industrial battery packs, while the dual differential architecture eliminates the need for two separate comparator packages. The open-collector outputs can drive fault indicators or controller inputs through pull-up networks. Design the threshold around a stable reference, include hysteresis to prevent oscillation near the trip point, and account for battery chemistry, tolerance, temperature drift, and input offset before setting the final switching levels.
Direkomendasikan
Window Comparator for Signal Qualification
The two channels in the LM393ADGKRG4 can establish upper and lower limits around an analog signal, creating a window comparator for signal qualification. This arrangement is useful when a sensor output must remain within a defined band and the system needs an active-high or active-low indication of out-of-range conditions. The wide 2 V to 36 V supply range supports both low-voltage embedded systems and higher-voltage instrumentation. Choose pull-up voltages independently for the two outputs when they connect to different logic domains. For reliable behavior, derive both references from a low-noise source, add controlled hysteresis, and verify input overdrive and common-mode conditions across the full temperature range.
Direkomendasikan
Open-Collector Logic Level Translation
The LM393ADGKRG4 can translate between logic domains because each open-collector output is pulled up to the voltage of the destination circuit rather than being driven by an internal push-pull stage. The comparator’s 2 V to 36 V supply capability allows a low-voltage sensing section to control a higher-voltage digital input, provided the input common-mode and absolute-maximum conditions remain satisfied. This approach is particularly useful with wired-AND buses, relay-driver interfaces, and legacy open-collector logic. Select the pull-up voltage and resistor for the required speed and current, and ensure that every attached open-collector transistor can withstand the bus voltage during the off state.
Direkomendasikan
Automotive and Heavy Equipment Control Interfaces
The LM393ADGKRG4 can serve as a general-purpose decision element in equipment-control systems where a sensor or supply rail must be compared with a threshold. Its dual-channel architecture allows two independent conditions to be evaluated, and its broad supply range accommodates multiple nominal system voltages. The open-collector outputs are useful for driving discrete indicators or connecting to controller inputs after appropriate pull-up selection. For vehicle or severe-environment equipment, verify whether the selected LM393 grade meets the required temperature and qualification criteria. Also check vibration, transient, and electrical-noise requirements at the system level; comparator qualification alone does not establish compliance of the completed assembly.
Direkomendasikan
Portable and Battery-Powered Monitoring
The LM393ADGKRG4 is applicable to portable equipment that must monitor a battery-derived rail or evaluate a low-power sensor signal. Its 2 V minimum supply allows operation from a single-cell or low-voltage source, while the 8-VSSOP package supports space-constrained layouts. The open-collector output minimizes the number of active output stages and allows the pull-up voltage to match a low-power controller domain. Select the pull-up resistance carefully because a high resistance reduces current consumption but can slow the output transition and increase susceptibility to leakage or noise. Confirm the comparator’s quiescent-current requirement and output-leakage limits for the intended battery operating profile.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk LM393ADGKRG4 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | LM393ADGKR | LM293ADGKR | LM393DGK | LM393DGKR | LM393ADGKT |
|---|---|---|---|---|---|---|
| Package | 8-VSSOP | 8-VSSOP - same | 8-VSSOP - same | 8-VSSOP - same | 8-VSSOP - same | 8-VSSOP - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Device Family | LM393 | LM393 | LM293 | LM393 | LM393 | LM393 |
Diferensiator Kunci
- Two independent comparator channels in one package (vsLM293ADGKR)
- Direct logical equivalent with the same listed electrical configuration (vsLM393ADGKR)
- Open-collector interface supports flexible pull-up voltage (vsLM393DGK)
Catatan Desain
Calculate the required pull-up network from the receiving logic’s input current, desired rise time, and the LM393 output sink-current limit. A smaller pull-up produces a faster rising edge but increases current when the output transistor is on; a larger pull-up reduces current but can slow the transition and make leakage effects more significant. Verify both the high-state voltage and the maximum current through the open-collector transistor against the manufacturer datasheet.
Avoid operating the inputs outside the supported common-mode range, especially when the signal approaches a supply rail or when split supplies create a large total voltage. Input offset can shift the decision point, and insufficient hysteresis can cause repeated output transitions as noise moves the differential input around the threshold. Use a stable reference and add deliberate positive feedback where the application cannot tolerate output chatter.
Keep the comparator input pins and reference network compact, with short traces and a quiet return path to the device ground. Place the pull-up resistor close to the open-collector output and avoid routing input and output traces in parallel with high-current switching paths. If a reference voltage is generated on the board, provide local bypassing and isolate sensitive threshold circuitry from inductors, power converters, and relay drivers.
Informasi Konformitas
The verified product information does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm the current manufacturer declarations for the exact ordering code before procurement.