Texas Instruments

LM393ADGKRG4 - Dual Open-Collector Comparator | Texas Instruments

N.º de pieza: LM393ADGKRG4 ✓ Activo
2 V to 36 V Vdss 8-VSSOP Package
MOQ: 1 |

LM393ADGKRG4 Descripción general

The Texas Instruments LM393ADGKRG4 is a dual differential analog comparator with two independent general-purpose channels, a 2 V to 36 V single-supply operating range, and an 8-VSSOP package. Each comparator provides open-collector output for compatibility with wired logic, and the device supports single-supply or split-supply operation. Its rail-to-rail input common-mode range makes it suitable for general-purpose voltage-threshold, signal-conditioning, and industrial control tasks.

An analog comparator is an interface IC that compares two input voltages and produces a logic-level indication of their relationship. The LM393 belongs to the comparator hierarchy within analog and mixed-signal semiconductors. Unlike a digital logic gate, the comparator evaluates continuously varying analog voltages, while its open-collector output provides a flexible interface to pull-up-based digital systems, relay drivers, and open-collector buses.

The two LM393ADGKRG4 channels operate independently, allowing one device to implement two threshold functions. Its open-collector outputs can sink current from an external pull-up and can be left unconnected when unused. The broad 2 V to 36 V supply range supports low-voltage logic systems as well as higher-voltage industrial and instrumentation circuits, while the 8-VSSOP surface-mount package supports compact PCB layouts.

Common-mode input behavior is an important architectural feature of the LM393 family. The manufacturer identifies the device as rail-to-rail, allowing the input voltages to approach the supply rails under supported operating conditions. The open-collector architecture is particularly useful when the output must drive a pull-up to a different voltage domain, participate in wired-AND logic, or control a downstream stage without an integrated push-pull output driver.

Typical uses include battery-threshold detection, sensor signal conditioning, overvoltage and undervoltage supervision, window comparators, industrial control interfaces, and logic-level translation between voltage domains. Two independent channels can monitor a pair of limits, compare a sensor signal against a reference, or provide separate comparator functions with the same device.

When designing the circuit, select an external pull-up resistor for each open-collector output and account for its maximum sink current, output voltage, and switching speed. Keep input and output paths away from high-current switching nodes, use a stable reference for precise thresholds, and verify the complete design against the manufacturer datasheet’s input common-mode, supply, output-current, and absolute-maximum-rating limits.

This page consolidates the verified LM393ADGKRG4 package and supply information with pin-level implementation guidance, application examples, and same-package replacement comparisons. It helps engineers identify the correct footprint, understand the open-collector interface, and assess whether a candidate alternative preserves both the 8-VSSOP layout and the LM393’s core operating characteristics.

Alternativas directas para LM393ADGKRG4 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con LM393ADGKRG4 (mismo factor de forma y huella) — difiere en Comparator Type, Number of Channels, Output Type, Package.

Texas Instruments
Comparator Type: Dual differential comparator
Package: 8-pin VSSOP
Comparar con LM393ADGKRG4 →
Texas Instruments
Comparator Type: Dual differential voltage comparator
Number of Channels: 2 independent channels
Output Type: Open collector
Comparar con LM393ADGKRG4 →

LM393ADGKR

✅ Sustitución directa
Texas Instruments
📦 8-VSSOP
Dual differential comparator · 2 channels · Open-collector · 2 V to 36 V · ±1 V to ±18 V · 1.3 us · 2 mV · 250 nA

Consulte el precio

Ver hoja de datos →

LM293ADGKR

✅ Sustitución directa
📦 8-VSSOP
Same dual-comparator architecture and 8-VSSOP footprint with 0% difference in the listed 2 V to 36 V core supply capability; temperature-grade classification differs.

📋 Alternativa de referencia (no en el catálogo)

LM393DGK

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 8-VSSOP
Same LM393 dual open-collector comparator and 8-VSSOP footprint with 0% difference in channel count and 2 V to 36 V supply range; device-marking and ordering configuration differ.

📋 Alternativa de referencia (no en el catálogo)

LM393DGKR

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Texas Instruments
📦 8-VSSOP
Dual differential voltage comparator · 2 independent channels · 2 V to 36 V · 2 V to 36 V · VCC at least 1.5 V more positive than input common-mode voltage · Open collector · Differential inputs on each channel · 8-VSSOP

Consulte el precio

Ver hoja de datos →

LM393ADGKT

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 8-VSSOP
Same LM393ADGK electrical device and 8-VSSOP footprint with 0% difference in dual-channel and 2 V to 36 V supply specifications; shipment packing differs.

📋 Alternativa de referencia (no en el catálogo)

LM393ADGKRG4 Valores máximos y características eléctricas

Comparator Type Dual differential general-purpose comparator
Number of Channels 2 channels
Supply Voltage Range 2 V to 36 V
Split-Supply Range ±1 V to ±18 V
Tipo de salida Open-collector
Input Common-Mode Range Rail-to-rail
Encapsulado 8-VSSOP
Package Family VSSOP family
Tipo de montaje Surface mount
Lead Pitch 0.118 in (3.00 mm)
Supply Configuration Single supply or split supply

Configuración de pines de LM393ADGKRG4

TSSOP-8 Package Pinout Diagram TSSOP-8 8-pin thin shrink small outline, P0.65mm, JEDEC MO-153. 1 8 2 7 3 6 4 5 TSSOP-8
Pin 1 OUT1 — Comparator 1 open-collector output
Pin 2 IN1- — Comparator 1 inverting input
Pin 3 IN1+ — Comparator 1 noninverting input
Pin 4 GND — Ground connection
Pin 5 IN2+ — Comparator 2 noninverting input
Pin 6 IN2- — Comparator 2 inverting input
Pin 7 OUT2 — Comparator 2 open-collector output
Pin 8 VCC — Positive supply connection

Aplicaciones típicas

LM393ADGKRG4 es adecuado para 6 aplicacións: Industrial Sensor Threshold Detection, Battery Overvoltage and Undervoltage Monitoring, Window Comparator for Signal Qualification, Open-Collector Logic Level Translation, Automotive and Heavy Equipment Control Interfaces, Portable and Battery-Powered Monitoring.

🏭

Industrial Sensor Threshold Detection

The LM393ADGKRG4 suits industrial sensor interfaces where a changing analog signal must be converted into a digital state. Its two independent differential channels can compare a sensor output with a reference or monitor two separate limits. The 2 V to 36 V supply range accommodates 3.3 V, 5 V, 12 V, and higher industrial rails, while the rail-to-rail input behavior supports thresholds near the supply rails. Use one channel for an upper threshold and the other for a lower threshold, adding positive feedback for hysteresis. The open-collector outputs can pull up to the voltage required by a controller input, although the external pull-up and the comparator’s sink-current limit must be selected together.

⚡

Battery Overvoltage and Undervoltage Monitoring

The LM393ADGKRG4 can implement dual battery-limit monitoring by assigning one comparator to an overvoltage threshold and the other to an undervoltage threshold. The 2 V to 36 V operating range is useful for low-voltage cells and multi-cell industrial battery packs, while the dual differential architecture eliminates the need for two separate comparator packages. The open-collector outputs can drive fault indicators or controller inputs through pull-up networks. Design the threshold around a stable reference, include hysteresis to prevent oscillation near the trip point, and account for battery chemistry, tolerance, temperature drift, and input offset before setting the final switching levels.

📺

Window Comparator for Signal Qualification

The two channels in the LM393ADGKRG4 can establish upper and lower limits around an analog signal, creating a window comparator for signal qualification. This arrangement is useful when a sensor output must remain within a defined band and the system needs an active-high or active-low indication of out-of-range conditions. The wide 2 V to 36 V supply range supports both low-voltage embedded systems and higher-voltage instrumentation. Choose pull-up voltages independently for the two outputs when they connect to different logic domains. For reliable behavior, derive both references from a low-noise source, add controlled hysteresis, and verify input overdrive and common-mode conditions across the full temperature range.

🌐

Open-Collector Logic Level Translation

The LM393ADGKRG4 can translate between logic domains because each open-collector output is pulled up to the voltage of the destination circuit rather than being driven by an internal push-pull stage. The comparator’s 2 V to 36 V supply capability allows a low-voltage sensing section to control a higher-voltage digital input, provided the input common-mode and absolute-maximum conditions remain satisfied. This approach is particularly useful with wired-AND buses, relay-driver interfaces, and legacy open-collector logic. Select the pull-up voltage and resistor for the required speed and current, and ensure that every attached open-collector transistor can withstand the bus voltage during the off state.

🚗

Automotive and Heavy Equipment Control Interfaces

The LM393ADGKRG4 can serve as a general-purpose decision element in equipment-control systems where a sensor or supply rail must be compared with a threshold. Its dual-channel architecture allows two independent conditions to be evaluated, and its broad supply range accommodates multiple nominal system voltages. The open-collector outputs are useful for driving discrete indicators or connecting to controller inputs after appropriate pull-up selection. For vehicle or severe-environment equipment, verify whether the selected LM393 grade meets the required temperature and qualification criteria. Also check vibration, transient, and electrical-noise requirements at the system level; comparator qualification alone does not establish compliance of the completed assembly.

📱

Portable and Battery-Powered Monitoring

The LM393ADGKRG4 is applicable to portable equipment that must monitor a battery-derived rail or evaluate a low-power sensor signal. Its 2 V minimum supply allows operation from a single-cell or low-voltage source, while the 8-VSSOP package supports space-constrained layouts. The open-collector output minimizes the number of active output stages and allows the pull-up voltage to match a low-power controller domain. Select the pull-up resistance carefully because a high resistance reduces current consumption but can slow the output transition and increase susceptibility to leakage or noise. Confirm the comparator’s quiescent-current requirement and output-leakage limits for the intended battery operating profile.

What are the key specifications of LM393ADGKRG4 that engineers should know?
The LM393ADGKRG4 is a dual general-purpose comparator with two independent channels, a 2 V to 36 V supply range, open-collector outputs, and an 8-VSSOP package. According to the Texas Instruments LM393 datasheet, the device can operate from a single supply or split supplies of ±1 V to ±18 V and supports rail-to-rail input common-mode operation. Each output requires an external pull-up when used as a standard wired logic output.
What is the operating voltage of LM393ADGKRG4?
The LM393ADGKRG4 operates from 2 V to 36 V when powered by a single supply. According to the Texas Instruments LM393 datasheet, split-supply operation is also possible over ±1 V to ±18 V. The allowable total supply span and input common-mode limits must be respected in every design, especially when the comparator receives signals near the upper or lower supply rail.
What type of output does LM393ADGKRG4 use?
The LM393ADGKRG4 uses open-collector outputs on both comparator channels. According to the Texas Instruments LM393 datasheet, the output transistor can sink current from an external pull-up but cannot actively drive the output high. The pull-up may connect to a supply selected for the next logic stage, enabling level translation and wired-AND or wired-OR behavior when multiple open-collector outputs share a node.
Where can I download the LM393ADGKRG4 datasheet PDF?
The LM393ADGKRG4 datasheet PDF is available from the Texas Instruments product documentation at https://www.ti.com/lit/ds/symlink/lm393.pdf. The document describes the dual-comparator architecture, supply limits, input common-mode behavior, open-collector outputs, pin configuration, and electrical characteristics. Use the manufacturer datasheet as the controlling document when finalizing a circuit or verifying absolute-maximum ratings.
Where can I find the LM393ADGKRG4 pinout?
The LM393ADGKRG4 uses an 8-VSSOP pinout with two independent comparator channels: OUT1, IN1−, IN1+, GND, IN2+, IN2−, OUT2, and VCC at pins 1 through 8. According to the Texas Instruments LM393 datasheet, both noninverting inputs are tied to VCC internally, while the noninverting input pins remain available for external signals. Assign PCB tracks using the package drawing and pin-description table in the manufacturer datasheet.
Can LM393ADGKRG4 operate from split supplies?
Yes, the LM393ADGKRG4 can operate from split supplies over ±1 V to ±18 V as well as from a single 2 V to 36 V source. According to the Texas Instruments LM393 datasheet, split-supply operation is possible when the total supply difference and common-mode limits are respected. This makes the device appropriate for bipolar sensing systems where the signal can cross the midpoint between negative and positive rails.
What can replace LM393ADGKRG4?
The closest same-footprint replacements are LM393ADGKR, LM393DGK, LM393DGKR, and LM293ADGKR in the 8-VSSOP family, provided their temperature grade, electrical limits, marking, and sourcing requirements match the intended design. According to Texas Instruments comparison information, LM393-family options differ in voltage range and performance details. Confirm the complete pin map and operating limits before treating any candidate as a drop-in replacement.
Is LM393ADGKRG4 the same as LM393ADGKR?
The LM393ADGKRG4 and LM393ADGKR describe the same TI comparator in 8-VSSOP packaging, with the final ordering code reflecting the supplier packing configuration. According to the Texas Instruments product listings, both use the LM393ADGK device and open-collector architecture. Verify the required reel or other shipment format when ordering, but compare the electrical MPN rather than relying on the packaging suffix alone.
What is the best LM293ADGKR alternative for LM393ADGKRG4?
LM293ADGKR is a relevant same-package alternative because it is also described as a dual differential comparator in an 8-VSSOP package. The meaningful distinction is the device-family temperature grade, not the physical footprint. According to Texas Instruments product information, the LM293 and LM393 families share the basic comparator architecture but have different operating classifications. Choose based on the required environmental range and verified electrical limits.
When should I choose LM393ADGKRG4 over LM393DGKR?
Choose LM393ADGKRG4 when the exact LM393ADGK ordering configuration and its associated grade are required by your BOM or qualification process. LM393DGKR is a closely related 8-VSSOP option, but the device suffix can indicate a different qualification, grade, or marking arrangement even when the comparator architecture is similar. According to Texas Instruments ordering information, confirm the full device details and operating-temperature requirements before substitution.
Is LM393ADGKRG4 suitable for sensor threshold detection?
Yes, the LM393ADGKRG4 is suitable for sensor threshold detection when the sensor signal remains within the supported input common-mode range. According to the Texas Instruments LM393 datasheet, its rail-to-rail input behavior and 2 V to 36 V supply range support low-voltage sensing systems. Add hysteresis to prevent output chatter, use a stable reference for the threshold, and account for input offset when the decision boundary must be precise.
How should an open-collector comparator output be connected?
Connect an external pull-up resistor from each LM393ADGKRG4 output to the supply used by the receiving logic device. According to the Texas Instruments LM393 datasheet, the open-collector transistor actively sinks current but does not source output current. Select the resistor using the required rise time, logic-current budget, and maximum sink-current rating, and leave the output unconnected if that channel is unused.
Where to buy LM393ADGKRG4 online?
Use the Request a Quote form on this page to request LM393ADGKRG4 availability, order quantity, and shipment information. The Request a Quote workflow provides a single route for commercial review without relying on potentially stale marketplace listings. For a production design, specify the exact LM393ADGKRG4 ordering code, 8-VSSOP package, tape-and-reel format, and required quantity.
What is the price of LM393ADGKRG4?
Use the Request a Quote form on this page for the current commercial price of LM393ADGKRG4. Pricing can vary with quantity, shipment format, and current market conditions, so a current quotation is more useful than a static listing value. Include your required order quantity and packaging format to allow the product team to return an accurate response.
What is the lead time for LM393ADGKRG4 and is it in stock?
Current stock status and lead time for LM393ADGKRG4 should be confirmed through the Request a Quote form on this page. The form captures the exact quantity, package format, and delivery requirement needed for a meaningful allocation response. Treat any general availability indication as temporary until the quotation confirms the orderable configuration and current dispatch schedule.

Datos de referencia de ingeniería para LM393ADGKRG4 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the LM393ADGKRG4 when the design requires a dual general-purpose comparator with open-collector outputs, rail-to-rail input behavior, a 2 V to 36 V supply range, and the 8-VSSOP footprint. LM393ADGKR is the closest ordering option when the required supplier packing differs, with no change to the listed core electrical configuration. LM293ADGKR offers the same physical package and dual-comparator architecture but should be selected only when its distinct temperature-grade classification fits the operating environment. LM393DGK, LM393DGKR, and LM393ADGKT are same-brand alternatives for procurement flexibility, but their marking, qualification, and ordering codes must be reconciled with the BOM. None should be treated as interchangeable without checking the full TI ordering table, electrical limits, operating-temperature grade, and required shipment format.

Comparación con alternativas

Parámetro Este producto LM393ADGKR LM293ADGKR LM393DGK LM393DGKR LM393ADGKT
Package 8-VSSOP 8-VSSOP - same 8-VSSOP - same 8-VSSOP - same 8-VSSOP - same 8-VSSOP - same
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Device Family LM393 LM393 LM293 LM393 LM393 LM393

Diferenciadores clave

  • Two independent comparator channels in one package (frente a LM293ADGKR)
  • Direct logical equivalent with the same listed electrical configuration (frente a LM393ADGKR)
  • Open-collector interface supports flexible pull-up voltage (frente a LM393DGK)

Notas de diseño

Calculate the required pull-up network from the receiving logic’s input current, desired rise time, and the LM393 output sink-current limit. A smaller pull-up produces a faster rising edge but increases current when the output transistor is on; a larger pull-up reduces current but can slow the transition and make leakage effects more significant. Verify both the high-state voltage and the maximum current through the open-collector transistor against the manufacturer datasheet.

Avoid operating the inputs outside the supported common-mode range, especially when the signal approaches a supply rail or when split supplies create a large total voltage. Input offset can shift the decision point, and insufficient hysteresis can cause repeated output transitions as noise moves the differential input around the threshold. Use a stable reference and add deliberate positive feedback where the application cannot tolerate output chatter.

Keep the comparator input pins and reference network compact, with short traces and a quiet return path to the device ground. Place the pull-up resistor close to the open-collector output and avoid routing input and output traces in parallel with high-current switching paths. If a reference voltage is generated on the board, provide local bypassing and isolate sensitive threshold circuitry from inductors, power converters, and relay drivers.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The verified product information does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm the current manufacturer declarations for the exact ordering code before procurement.

Datos verificados el: 2026-11-09 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

LM393ADGKRG4 datasheet LM393ADGKRG4 pinout LM393ADGKRG4 datasheet pdf LM393ADGKRG4 equivalent LM393ADGKRG4 replacement LM393ADGKRG4 cross reference LM393ADGKRG4 vs LM393ADGKR LM393ADGKRG4 footprint LM393ADGKRG4 price LM393ADGKRG4 stock Texas Instruments LM393ADGKRG4 LM393 8-VSSOP open collector LM393ADGKRG4 application circuit LM393ADGKRG4 supply voltage

Componentes & términos relacionados

Texas Instruments LM393ADGKRG4 LM393ADGKR LM293ADGKR LM393DGK LM393DGKR LM393ADGKT dual differential comparator analog comparator interface IC semiconductor open-collector output rail-to-rail input input common-mode range single-supply operation split-supply operation VSSOP-8 VSSOP family surface-mount package SMD industrial sensor threshold detection battery monitoring window comparator logic level translation RoHS REACH AEC-Q100
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ