LPC1114LVFHN24/303 - 50MHz Cortex-M0 32KB MCU | NXP
MPN: LPC1114LVFHN24/303 ✗ Akhir HidupLPC1114LVFHN24/303 Ringkasan
A microcontroller (MCU) is a single-chip computer integrating a processor core, memory, and peripherals, used as the control element in embedded systems. Within this hierarchy, the Cortex-M0 is a 32-bit ARM core, and the LPC11xxLV family from NXP is positioned as a low-cost 32-bit replacement for 8-bit and 16-bit MCU applications, offering higher performance, lower power, and a simple instruction set with reduced code size compared to existing 8/16-bit architectures.
Key features of the LPC1114LVFHN24/303 include the ARM Cortex-M0 core running at 50 MHz, 32 kB on-chip flash (32K x 8), 8 kB SRAM, and a low-voltage supply operation consistent with the LPC1100LV series designation. The compact 24-HVQFN exposed-pad package suits space-constrained designs, and peripherals such as USART, SPI/SSP, I2C, timers, and the 8-bit ADC support typical embedded connectivity and sensing tasks.
The Cortex-M0 architecture uses a von Neumann structure with a 32-bit instruction set subset (56 instructions) and Thumb code density, making code smaller than comparable 8/16-bit cores while delivering deterministic interrupt handling via the Nested Vectored Interrupt Controller (NVIC). The single-cycle I/O porting and configurable pin function multiplexing on the LPC1114 allow flexible peripheral mapping on the limited 24-pin footprint.
According to NXP and Arm Keil documentation, typical applications for the LPC1100LV series include 8/16-bit application migration, eMetering, lighting, alarm systems, and general embedded control. The LPC1114LVFHN24/303 fits designs needing 32-bit performance and 32 kB flash in a 4x4 mm QFN.
Important design consideration: NXP lists the LPC1114LVFHN24 base part as End of Life (per the NXP product page), so verify stock and plan a replacement strategy before new designs; consult the manufacturer datasheet for exact supply voltage limits and pin mapping.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Alternatif penggantian untuk LPC1114LVFHN24/303 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian LPC1114LVFHN24/303 (sama faktor bentuk dan footprint) — berbeda di dalam Package.
LPC1114FHN33/303
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
LPC1112LVFHN24/003
✅ Drop-InKontak untuk harga
Lihat Datasheet →LPC1113LVFHN24/003
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
LPC1112LVFHN24/303
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
LPC1114FHN33/333
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
LPC1114LVFHN24/303 Rating Maksimal & Karakteristik Listrik
| Core Processor | ARM Cortex-M0 |
| Core Size | 32-Bit |
| Frekuensi Bawah Maximum | 50 MHz |
| Flash Memory Size | 32 KB (32K x 8) |
| SRAM Size | 8 KB |
| Series | LPC1100LV |
| ADC Resolution | 8-bit |
| Connectivity | I2C, SPI/SSP, UART/USART |
| Paket | 24-HVQFN (4x4 mm), Exposed Pad |
| Tipe Mounting | Surface Mount |
| Data Sheet Pages | 53 Pages (per alldatasheet listing) |
| Status Lingkungan Hidup | End of Life (per NXP product page) |
LPC1114LVFHN24/303 24-hvqfn (4x4 mm), exposed pad Diamant Konfigurasi Panduan
Konfigurasi pin untuk LPC1114LVFHN24/303 (24-hvqfn (4x4 mm), exposed pad pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk LPC1114LVFHN24/303.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
LPC1114LVFHN24/303 cocok untuk 6 aplikasis: eMetering, Lighting Control (LED and ballast), Alarm and Security Systems, 8/16-bit Application Migration, Industrial Sensing Nodes, IoT Sensor End Nodes.
eMetering
Electricity, water, and gas metering electronics demand long service life, low cost, and reliable serial communication with measurement front-ends. The LPC1114LVFHN24/303 fits this profile: its ARM Cortex-M0 core at 50 MHz delivers far more computation headroom than 8-bit predecessors while the simple 56-instruction Thumb set keeps code compact within the 32 kB flash budget. Its I2C and UART interfaces connect to metrology ADCs and communication modules, and the 8-bit ADC handles auxiliary analog supervision such as tamper detection. Because NXP explicitly lists eMetering as a target application for the LPC1100 series, reference firmware and toolchain support are mature. Designers should manage the 8 kB SRAM carefully for cumulative energy registers and buffering.
Direkomendasikan
Lighting Control (LED and ballast)
Advanced lighting systems require PWM dimming, sensor inputs, and communication (DALI/DMX-over-UART), typically within tight cost and board-area budgets. The LPC1114LVFHN24/303 addresses this with multiple timer outputs on its 24-pin HVQFN footprint, a 50 MHz Cortex-M0 core for smooth high-resolution PWM, and UART/I2C links to drivers and occupancy sensors. The low-voltage LV supply class suits dimmer electronics powered from auxiliary low-voltage rails. The 4x4 mm QFN with exposed pad fits into compact LED driver PCBs, and the 32 kB flash accommodates a full lighting protocol stack. Confirm the LV voltage range against the driver auxiliary supply and use the exposed pad for ground return to reduce switching noise coupling into ADC readings.
Direkomendasikan
Alarm and Security Systems
Alarm panels and security sensors combine low standby power, multiple digital inputs, and reliable communication - a natural fit for the LPC1114LVFHN24/303. The Cortex-M0's deterministic interrupt handling via the NVIC processes sensor events promptly, while the 32 kB flash stores detection algorithms and protocol handling for UART or I2C links to panels and RF modules. The 8-bit ADC supervises battery voltage and tamper loops. NXP names alarm systems explicitly among LPC1100 target applications, so the family's track record in this space eases qualification. In battery-backed sensors, the LV variant's low-voltage operation helps extend runtime from primary cells; verify sleep and deep-sleep currents in the datasheet for your power budget.
Direkomendasikan
8/16-bit Application Migration
The primary purpose of the LPC1100LV family is replacing legacy 8-bit (8051, PIC16) and 16-bit MCUs with a 32-bit ARM core at comparable cost. The LPC1114LVFHN24/303 offers a single-cycle Cortex-M0, free GCC/Keil toolchains, and CMSIS-compliant libraries, so firmware productivity improves even though the instruction set differs. The 32 kB flash and 8 kB SRAM comfortably host applications that challenged 8-bit parts' 16-bit address spaces. Migration requires a new PCB unless the legacy part already used a similar QFN footprint, but hardware BOM cost often falls because fewer external glue components are needed. NXP positions the family explicitly as a performance, power, and code-size upgrade over existing 8/16-bit architectures.
Direkomendasikan
Industrial Sensing Nodes
Factory sensing nodes - temperature probes, limit switches, simple actuators - benefit from the LPC1114LVFHN24/303's combination of an 8-bit ADC, USART, and I2C/SPI peripherals in a compact 4x4 mm QFN. The 50 MHz Cortex-M0 processes sensor linearization and filtering locally, while the UART connects to RS-485 transceivers for noisy industrial buses. The exposed pad provides a solid ground connection important for EMC in electrically harsh environments. Because the part is EOL, industrial users should either secure last-time-buy stock or qualify the pin-compatible LPC1114FHN33/303 as a substitution path. Verify the operating temperature grade and supply range in the datasheet against the node's enclosure thermal profile before deployment.
Direkomendasikan
IoT Sensor End Nodes
Low-cost IoT end nodes pair a small MCU with a radio module and one or two sensors, exactly the role of the LPC1114LVFHN24/303. The Cortex-M0 handles sensor acquisition and protocol framing while a separate BLE or sub-GHz radio (connected via UART/SPI) manages the air interface, keeping the MCU's 32 kB flash and 8 kB SRAM well within budget. The LV low-voltage supply class supports single-cell or low-rail designs typical of battery-powered nodes, and the 4x4 mm QFN preserves board space for the antenna section. Since the part is EOL, prototype with it only if production stock is secured; otherwise select an active MCU with an equivalent footprint-compatible NXP alternative from the LPC11xx HVQFN-24 family.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk LPC1114LVFHN24/303 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | LPC1114FHN33/303 | LPC1112LVFHN24/003 | LPC1113LVFHN24/003 | LPC1112LVFHN24/303 | LPC1114FHN33/333 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 24-HVQFN (4x4 mm), Exposed Pad | 24-HVQFN (4x4 mm) - same | 24-HVQFN (4x4 mm) - same | 24-HVQFN (4x4 mm) - same | 24-HVQFN (4x4 mm) - same | 24-HVQFN (4x4 mm) - same |
| Core | ARM Cortex-M0, 32-bit | ARM Cortex-M0, 32-bit | ARM Cortex-M0, 32-bit | ARM Cortex-M0, 32-bit | ARM Cortex-M0, 32-bit | ARM Cortex-M0, 32-bit |
| Max Clock Frequency | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz |
| Flash Memory | 32 KB | 32 KB | 16 KB | 24 KB | 16 KB | 32 KB |
| SRAM | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB |
| Supply Voltage Class | Low-voltage (LPC1100LV series) | Standard (3.3V class) | Low-voltage (LV) | Low-voltage (LV) | Low-voltage (LV) | Standard (3.3V class) |
Diferensiator Kunci
- Full 32 kB flash in the LV low-voltage class (vsLPC1112LVFHN24/003)
- Identical pin-compatible 32 kB option in standard voltage class (vsLPC1114FHN33/303)
- Trade-off: EOL lifecycle status (vsLPC1113LVFHN24/003)
Catatan Desain
As a member of the LPC1100LV low-voltage family, this MCU targets reduced supply rails compared to the standard 3.3V-class LPC1114FHN33 parts. Before layout, confirm the exact VDD range from the manufacturer datasheet and ensure the local regulator's tolerance stays inside it. Decouple VDD with a 100 nF ceramic placed within 2-3 mm of the HVQFN power pin plus a 4.7-10 uF bulk capacitor per rail. Solder the exposed pad to a grounded copper pour for both thermal relief and a low-inductance ground return - omitting this connection is a common field-failure cause on QFN microcontrollers.
The most frequent integration mistake with EOL LPC111x parts is reusing an outdated schematic-capture symbol with wrong pin-multiplexing defaults. GPIO functions on the LPC1114 are assigned via IOCON registers per pin; UART, I2C (which needs external pull-ups, typically 4.7 kohm at 3V-class rails), and ADC functions must be explicitly enabled. Also, since NXP has published discontinuance notices for the LPC1114LVFHN24, freeze the firmware binary and CMSIS pack versions in your release management so legacy builds remain reproducible when tool vendors deprecate the target.
The 4x4 mm 24-HVQFN footprint requires a 0.5 mm pitch land pattern with the center pad connected to ground via a 4x4 array of 0.3 mm vias for solder pasting and outgassing during reflow. Keep the crystal (XTALIN/XTALOUT) traces under 10 mm, guard them with ground pour, and place 1 mm-maximum-distance load capacitors. Route SWD (SWCLK/SWDIO) to a 2x5 or 1x4 debug header even in production boards - field firmware updates on EOL silicon depend on retained debug access. Follow the footprint and land-pattern recommendations in the NXP datasheet package chapter.
Informasi Konformitas
Compliance data not present in the verified web data; consult the NXP product page Environmental Quality section for the LPC1114LVFHN24 official RoHS/REACH declarations.
