LPC11U34FHN33/311 - 50MHz Cortex-M0 MCU | NXP
MPN: LPC11U34FHN33/311 ✓ AktifLPC11U34FHN33/311 Ringkasan
A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, working memory, and peripherals into one device. The Arm Cortex-M0 core belongs to the microcontroller processor hierarchy and provides a compact, energy-efficient platform for embedded control. In the LPC11Uxx family, that general-purpose architecture is combined with USB device connectivity, USART communications, and mixed-signal peripheral functions for cost-sensitive applications.
The LPC11U34FHN33/311 provides 40 KB of flash for firmware and constants, 8 KB of SRAM for runtime data, and operation up to 50 MHz. Its 3.3 V to 3.6 V operating-supply range suits 3.3 V system rails, while its -40 °C to +85 °C temperature range covers industrial-temperature requirements. USB device and USART functions support direct peripheral connectivity, data transfer, and external serial interfaces without requiring separate discrete controllers.
The device uses the HVQFN package family, providing a compact 7 mm by 7 mm surface-mount solution. Its 0.65 mm terminal pitch supports dense PCB layouts, but the fine pitch also requires careful assembly planning and land-pattern verification. The Arm Keil device listing identifies the processor as Cortex-M0 at 50 MHz and associates it with the LPC1100 series and CMSIS Pack LPC1100_DFP, giving firmware developers a defined software-device-support path.
Typical uses include low-cost 8-bit and 16-bit embedded-control replacements, metering equipment, lighting systems, alarm systems, consumer peripherals, mobile-device accessories, and compact IoT nodes. The LPC11U34FHN33/311 is especially relevant when a design needs USB device connectivity and a USART within a small Cortex-M0 controller rather than a larger general-purpose microcontroller.
PCB implementation should begin with the exact NXP package drawing and pin-description table, especially for the 32-HVQFN footprint. Place decoupling capacitors close to the supply pins, preserve a continuous return path beneath the device, and validate the 0.65 mm-pitch assembly process. Firmware decisions should be checked against the NXP datasheet and the LPC1100_DFP device support package.
This product page combines the confirmed LPC11U34FHN33/311 identity, 50 MHz Cortex-M0 performance, 40 KB flash, 8 KB SRAM, package details, sourcing guidance, and practical design considerations. It also separates confirmed technical attributes from parameters that require confirmation from the manufacturer datasheet before design release.
Alternatif penggantian untuk LPC11U34FHN33/311 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
LPC11U34FHN33
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
LPC11U34FHN33/311 Rating Maksimal & Karakteristik Listrik
| Processor Core | Arm Cortex-M0, 32-bit |
| Maximum CPU Frequency | 50 MHz |
| Program Memory | 40 KB flash |
| Static RAM | 8 KB SRAM |
| Tegangan Pemuat Kerja | 3.3 V to 3.6 V |
| Suhu Kerja | -40 °C to +85 °C |
| Paket | 32-HVQFN, 7 mm × 7 mm |
| Terminal Count | 33 terminals |
| Terminal Pitch | 0.65 mm |
| Tipe Mounting | Surface mount |
| USB Controller | 1 USB device controller |
| Serial Interface | USART controller |
| Software Device Support | CMSIS Pack LPC1100_DFP |
| Application Processor Instruction Set | Arm Cortex-M0 |
| Product Series | LPC1100 series |
| Status Lingkungan Hidup | Active |
LPC11U34FHN33/311 32-hvqfn, 7 mm × 7 mm Diamant Konfigurasi Panduan
Konfigurasi pin untuk LPC11U34FHN33/311 (32-hvqfn, 7 mm × 7 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk LPC11U34FHN33/311.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
LPC11U34FHN33/311 cocok untuk 6 aplikasis: USB Connected Consumer Peripherals, Smart Metering and Energy Measurement, Industrial Lighting Control, Alarm and Security Peripherals, Battery-Powered IoT Sensor Nodes, Low-Cost Embedded Control Modules.
USB Connected Consumer Peripherals
The LPC11U34FHN33/311 fits compact USB-connected accessories that require a 32-bit controller without the overhead of a high-performance application processor. Its Arm Cortex-M0 core operates up to 50 MHz, while 40 KB of flash accommodates device firmware, descriptors, and configuration data. The integrated USB device function and USART provide complementary wired connectivity for control, diagnostics, and data transfer. At 3.3 V to 3.6 V, the device integrates naturally with a regulated 3.3 V rail. The main design consideration is that its 8 KB SRAM is modest, so protocol buffering and real-time data flows should be reviewed against worst-case memory use.
Smart Metering and Energy Measurement
The LPC11U34FHN33/311 is suited to metering systems that periodically acquire measurements, process them locally, and report results through a serial or USB link. Its 50 MHz Cortex-M0 execution rate supports responsive control and measurement logic, while 40 KB of flash provides room for calibration tables, communication stacks, and application code. USART connectivity can serve a communications module, while the USB device controller can simplify direct host connectivity. The 3.3 V operating range supports embedded metering designs. Firmware partitioning must preserve calibration data integrity and account for the limited 8 KB SRAM during simultaneous acquisition and communications.
Industrial Lighting Control
The LPC11U34FHN33/311 can serve as the central controller in a compact lighting system because it combines a 50 MHz Cortex-M0 core with configurable embedded-control peripherals and 40 KB of flash. Lighting sequences, sensor inputs, alarms, and communication tasks can be managed without a larger microcontroller. USART connectivity allows connection to a driver board or supervisory controller, while USB can aid configuration and diagnostics. Its -40 °C to +85 °C operating range is appropriate for many industrial environments, provided the complete electrical design also meets the system’s isolation, surge, and EMC requirements.
Alarm and Security Peripherals
The LPC11U34FHN33/311 fits compact alarm panels, access-control peripherals, and distributed sensors that require deterministic local control and external reporting. The 32-bit Cortex-M0 processor can execute filtering, debouncing, state-machine, and event-handling logic at up to 50 MHz. Its 40 KB flash supports protocol handlers and application firmware, and the USART interface can connect to a radio or security module. The USB device function provides a useful configuration path during manufacturing or service. Designers should budget SRAM for event queues and protect critical state through the appropriate nonvolatile mechanism rather than assuming that all 40 KB of flash is writable at runtime.
Battery-Powered IoT Sensor Nodes
The LPC11U34FHN33/311 is appropriate for compact IoT sensor nodes that need local sensing, control, and low-speed connectivity in one package. The 50 MHz Cortex-M0 core can service sensor acquisition and communication tasks, and 40 KB of flash leaves space for application logic while 8 KB of SRAM supports transient processing. USART or USB connectivity can link a node to a communications module or configuration host. The 3.3 V to 3.6 V range aligns with many regulated sensor-node rails. For battery operation, power-consumption modes, wake sources, and analog measurement accuracy must be evaluated directly in the NXP documentation because those operating-point details are not established by the catalog identity alone.
Low-Cost Embedded Control Modules
The LPC11U34FHN33/311 provides a practical migration path for equipment originally built around low-cost 8-bit and 16-bit controllers but requiring a 32-bit architecture. Its 50 MHz Cortex-M0 core, 40 KB of flash, and 8 KB of SRAM provide more headroom for protocol handling and structured control code, while USB device and USART functions simplify external integration. Arm Keil support through the LPC1100_DFP gives developers access to a defined CMSIS device pack. When replacing an older controller, verify pin multiplexing, timing, interrupt priorities, and peripheral register compatibility rather than assuming software-level equivalence.
Data referensi engineering untuk LPC11U34FHN33/311 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | LPC11U34FHN33 |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Package | 32-HVQFN (7 mm × 7 mm) | 32-HVQFN (7 mm × 7 mm) |
| Processor Core | Arm Cortex-M0, 32-bit | Arm Cortex-M0, 32-bit |
| Maximum CPU Frequency | 50 MHz | 50 MHz |
| Flash Memory | 40 KB | 40 KB |
| SRAM | 8 KB | 8 KB |
| USB Support | USB device controller | USB device controller |
| Serial Interface | USART | USART |
Diferensiator Kunci
- Combines 50 MHz Cortex-M0 performance with USB device connectivity (vsLPC11U34FHN33)
- Provides 40 KB of flash for compact embedded firmware (vsLPC11U34FHN33)
- Uses 8 KB of SRAM and the same compact HVQFN footprint (vsLPC11U34FHN33)
- Supports the LPC1100_DFP device pack for Arm Keil workflows (vsLPC11U34FHN33)
Catatan Desain
Use the exact NXP HVQFN land pattern and pin-one orientation for the LPC11U34FHN33/311. The package is listed as 7 mm by 7 mm with a 0.65 mm terminal pitch, although catalog records describe a 33-terminal physical arrangement under the 32-HVQFN designation. Confirm whether the center terminal is the exposed pad, how many perimeter leads are used, and the permitted paste and solder-mask geometry before releasing artwork or placing the part.
Design the power rail around the confirmed 3.3 V to 3.6 V operating range. Place the required local bypass capacitors close to the device supply and ground terminals, and route the return current through the shortest practical path. The value of every input, output, and decoupling capacitor must be checked against the NXP datasheet’s recommended application circuit; those component values are not established by the catalog listing.
Do not assign peripheral functions solely from the LPC11Uxx family overview. The family can support interfaces such as I2C, SSP, PWM timers, an ADC, and numerous GPIO pins, but the exact LPC11U34FHN33/311 terminal map determines which functions are available on which pins. Compare the complete pin-description table with the desired schematic, and reserve debugger and boot-related pins before placing external circuitry.
The 0.65 mm terminal pitch can complicate assembly, inspection, and hand rework. Confirm the PCB manufacturer’s minimum line width, spacing, via-in-pad policy, and solder-mask bridge tolerances. A stencil design should follow the manufacturer’s land pattern rather than a generic HVQFN footprint. Likewise, avoid routing high-speed or high-current signals beneath the device unless the package and return-path configuration specifically support that practice.
The 8 KB SRAM can become the limiting resource in USB, USART, or simultaneous sensor-processing workloads. Estimate peak heap use, stack depth, DMA buffers, and communication queues during worst-case operation, then leave margin rather than sizing the design directly to the full 8 KB. Use the Cortex-M0 memory map and linker configuration in the LPC1100_DFP to detect overflows early.
Informasi Konformitas
The NXP product page lists the device as Active, but the available product records do not explicitly establish the requested environmental or material-compliance classifications. AEC-Q100 status is recorded as unknown because the target ordering code is not identified as an automotive-qualified variant.