NXP Semiconductors

LPC11U34FHN33/311 - 50MHz Cortex-M0 MCU | NXP

MPN: LPC11U34FHN33/311 ✓ Nakahanda
3.3 V to 3.6 V Vdss 32-HVQFN, 7 mm × 7 mm Package 50 MHz Speed 40 KB flash Memory
MOQ: 1 |

LPC11U34FHN33/311 Ulas

The NXP Semiconductors LPC11U34FHN33/311 is a 32-bit Arm Cortex-M0 microcontroller operating up to 50 MHz, with 40 KB of flash memory, 8 KB of SRAM, and a 32-HVQFN surface-mount package measuring 7 mm by 7 mm. It is a member of the LPC11Uxx family, a low-cost embedded MCU platform intended for compact control, sensing, communications, and consumer-peripheral designs.

A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, working memory, and peripherals into one device. The Arm Cortex-M0 core belongs to the microcontroller processor hierarchy and provides a compact, energy-efficient platform for embedded control. In the LPC11Uxx family, that general-purpose architecture is combined with USB device connectivity, USART communications, and mixed-signal peripheral functions for cost-sensitive applications.

The LPC11U34FHN33/311 provides 40 KB of flash for firmware and constants, 8 KB of SRAM for runtime data, and operation up to 50 MHz. Its 3.3 V to 3.6 V operating-supply range suits 3.3 V system rails, while its -40 °C to +85 °C temperature range covers industrial-temperature requirements. USB device and USART functions support direct peripheral connectivity, data transfer, and external serial interfaces without requiring separate discrete controllers.

The device uses the HVQFN package family, providing a compact 7 mm by 7 mm surface-mount solution. Its 0.65 mm terminal pitch supports dense PCB layouts, but the fine pitch also requires careful assembly planning and land-pattern verification. The Arm Keil device listing identifies the processor as Cortex-M0 at 50 MHz and associates it with the LPC1100 series and CMSIS Pack LPC1100_DFP, giving firmware developers a defined software-device-support path.

Typical uses include low-cost 8-bit and 16-bit embedded-control replacements, metering equipment, lighting systems, alarm systems, consumer peripherals, mobile-device accessories, and compact IoT nodes. The LPC11U34FHN33/311 is especially relevant when a design needs USB device connectivity and a USART within a small Cortex-M0 controller rather than a larger general-purpose microcontroller.

PCB implementation should begin with the exact NXP package drawing and pin-description table, especially for the 32-HVQFN footprint. Place decoupling capacitors close to the supply pins, preserve a continuous return path beneath the device, and validate the 0.65 mm-pitch assembly process. Firmware decisions should be checked against the NXP datasheet and the LPC1100_DFP device support package.

This product page combines the confirmed LPC11U34FHN33/311 identity, 50 MHz Cortex-M0 performance, 40 KB flash, 8 KB SRAM, package details, sourcing guidance, and practical design considerations. It also separates confirmed technical attributes from parameters that require confirmation from the manufacturer datasheet before design release.

Mga alternatibo na pwedeng ilagay na LPC11U34FHN33/311 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

LPC11U34FHN33

✅ Drop-In
📦 32-HVQFN (7x7 mm)
Base LPC11U34FHN33 ordering designation versus the /311 order code; core, 40 KB flash, 8 KB SRAM, 50 MHz rating, and HVQFN package are unchanged, with 0% electrical difference

📋 Alternatibo na Reference (hindi sa katalogo)

LPC11U34FHN33/311 Mga Pinakamataas na Rating at Electrical Characteristics

Processor Core Arm Cortex-M0, 32-bit
Maximum CPU Frequency 50 MHz
Program Memory 40 KB flash
Static RAM 8 KB SRAM
Supply Voltage na Operasyon 3.3 V to 3.6 V
Temperature na Operasyon -40 °C to +85 °C
Packhaging 32-HVQFN, 7 mm × 7 mm
Terminal Count 33 terminals
Terminal Pitch 0.65 mm
Uri ng Pagpapasok Surface mount
USB Controller 1 USB device controller
Serial Interface USART controller
Software Device Support CMSIS Pack LPC1100_DFP
Application Processor Instruction Set Arm Cortex-M0
Product Series LPC1100 series
Katayuan ng Lifecycle Active

Gabay sa Pin Configuration ng LPC11U34FHN33/311 32-hvqfn, 7 mm × 7 mm

Pin configuration para sa LPC11U34FHN33/311 (32-hvqfn, 7 mm × 7 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 32-hvqfn, 7 mm × 7 mm package para sa LPC11U34FHN33/311

Wala ng detalyadong pinout data na magagamit para sa LPC11U34FHN33/311.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

LPC11U34FHN33/311 ay nararapat para sa 6 aplikasyons: USB Connected Consumer Peripherals, Smart Metering and Energy Measurement, Industrial Lighting Control, Alarm and Security Peripherals, Battery-Powered IoT Sensor Nodes, Low-Cost Embedded Control Modules.

📱

USB Connected Consumer Peripherals

The LPC11U34FHN33/311 fits compact USB-connected accessories that require a 32-bit controller without the overhead of a high-performance application processor. Its Arm Cortex-M0 core operates up to 50 MHz, while 40 KB of flash accommodates device firmware, descriptors, and configuration data. The integrated USB device function and USART provide complementary wired connectivity for control, diagnostics, and data transfer. At 3.3 V to 3.6 V, the device integrates naturally with a regulated 3.3 V rail. The main design consideration is that its 8 KB SRAM is modest, so protocol buffering and real-time data flows should be reviewed against worst-case memory use.

⚡

Smart Metering and Energy Measurement

The LPC11U34FHN33/311 is suited to metering systems that periodically acquire measurements, process them locally, and report results through a serial or USB link. Its 50 MHz Cortex-M0 execution rate supports responsive control and measurement logic, while 40 KB of flash provides room for calibration tables, communication stacks, and application code. USART connectivity can serve a communications module, while the USB device controller can simplify direct host connectivity. The 3.3 V operating range supports embedded metering designs. Firmware partitioning must preserve calibration data integrity and account for the limited 8 KB SRAM during simultaneous acquisition and communications.

💡

Industrial Lighting Control

The LPC11U34FHN33/311 can serve as the central controller in a compact lighting system because it combines a 50 MHz Cortex-M0 core with configurable embedded-control peripherals and 40 KB of flash. Lighting sequences, sensor inputs, alarms, and communication tasks can be managed without a larger microcontroller. USART connectivity allows connection to a driver board or supervisory controller, while USB can aid configuration and diagnostics. Its -40 °C to +85 °C operating range is appropriate for many industrial environments, provided the complete electrical design also meets the system’s isolation, surge, and EMC requirements.

🧩

Alarm and Security Peripherals

The LPC11U34FHN33/311 fits compact alarm panels, access-control peripherals, and distributed sensors that require deterministic local control and external reporting. The 32-bit Cortex-M0 processor can execute filtering, debouncing, state-machine, and event-handling logic at up to 50 MHz. Its 40 KB flash supports protocol handlers and application firmware, and the USART interface can connect to a radio or security module. The USB device function provides a useful configuration path during manufacturing or service. Designers should budget SRAM for event queues and protect critical state through the appropriate nonvolatile mechanism rather than assuming that all 40 KB of flash is writable at runtime.

🧩

Battery-Powered IoT Sensor Nodes

The LPC11U34FHN33/311 is appropriate for compact IoT sensor nodes that need local sensing, control, and low-speed connectivity in one package. The 50 MHz Cortex-M0 core can service sensor acquisition and communication tasks, and 40 KB of flash leaves space for application logic while 8 KB of SRAM supports transient processing. USART or USB connectivity can link a node to a communications module or configuration host. The 3.3 V to 3.6 V range aligns with many regulated sensor-node rails. For battery operation, power-consumption modes, wake sources, and analog measurement accuracy must be evaluated directly in the NXP documentation because those operating-point details are not established by the catalog identity alone.

🏭

Low-Cost Embedded Control Modules

The LPC11U34FHN33/311 provides a practical migration path for equipment originally built around low-cost 8-bit and 16-bit controllers but requiring a 32-bit architecture. Its 50 MHz Cortex-M0 core, 40 KB of flash, and 8 KB of SRAM provide more headroom for protocol handling and structured control code, while USB device and USART functions simplify external integration. Arm Keil support through the LPC1100_DFP gives developers access to a defined CMSIS device pack. When replacing an older controller, verify pin multiplexing, timing, interrupt priorities, and peripheral register compatibility rather than assuming software-level equivalence.

What is the operating voltage of LPC11U34FHN33/311?
The LPC11U34FHN33/311 operates from 3.3 V to 3.6 V according to the component listing for the exact ordered device. This range is suitable for systems using a regulated 3.3 V rail. Confirm absolute maximum voltage limits, decoupling requirements, and power-sequencing constraints in the NXP datasheet before connecting external circuitry, because the operating range alone does not define every electrical boundary condition.
What are the key specifications of LPC11U34FHN33/311 that engineers should know?
The LPC11U34FHN33/311 combines a 32-bit Arm Cortex-M0 processor, up to 50 MHz operating frequency, 40 KB of flash memory, and 8 KB of SRAM in a 32-HVQFN package measuring 7 mm by 7 mm. According to the NXP product information and distributor listings, it also supports USB device connectivity and USART communication. Its confirmed supply range is 3.3 V to 3.6 V, with an operating temperature range of -40 °C to +85 °C.
Where to download the LPC11U34FHN33/311 datasheet PDF?
The official LPC11U34FHN33 product page is the preferred starting point for the manufacturer datasheet and product documentation. The indexed PDF copy is also available through Alldatasheet for the LPC11U34FHN33 family document. Use the NXP document for final design decisions because it is the authoritative manufacturer source. The indexed PDF identifies the document as a 76-page datasheet for the LPC11U34FHN33 device.
Where can I find the LPC11U34FHN33/311 pinout and package drawing?
Use the pin-description table and HVQFN package drawing in the NXP LPC11U34FHN33 datasheet to assign every terminal and establish the PCB land pattern. The component is listed in a 32-HVQFN, 7 mm × 7 mm package with 0.65 mm terminal pitch, although one listing describes the physical terminal arrangement as 33 terminals. Confirm the exposed-pad treatment, pin-one orientation, and land pattern directly from the manufacturer drawing before fabrication.
What can replace the LPC11U34FHN33/311 on the same PCB?
The LPC11U34FHN33 is the closest documented same-footprint replacement candidate for the LPC11U34FHN33/311 ordering designation. It retains the 40 KB flash, 8 KB SRAM, 50 MHz Cortex-M0 configuration, and HVQFN package identity, allowing software and board-level reuse subject to order-code and pin-definition review. No independently documented cross-manufacturer drop-in alternative was established for this exact footprint.
Is LPC11U34FHN33/311 the same as LPC11U34FHN33?
The LPC11U34FHN33/311 is an ordered form of the LPC11U34FHN33 device, while the NXP product page is indexed under the base LPC11U34FHN33 designation. The listings consistently associate the ordered device with 40 KB flash, 8 KB SRAM, a 50 MHz Cortex-M0 core, and a 32-HVQFN package. Verify the ordering-information table to determine how the trailing order code affects packing, temperature, or other delivery attributes.
When should I choose LPC11U34FHN33/311 over a larger Cortex-M MCU?
Choose the LPC11U34FHN33/311 when a design needs a 50 MHz Cortex-M0 controller, 40 KB flash, 8 KB SRAM, USB device support, and USART communication in a compact 7 mm × 7 mm HVQFN footprint. It is appropriate for low-cost control, metering, lighting, alarm, consumer-peripheral, and connected embedded products. Select a larger MCU when the application requires substantially more memory, higher performance, more I/O, or advanced peripherals.
Is LPC11U34FHN33/311 suitable for IoT and connected devices?
The LPC11U34FHN33/311 is suitable for compact IoT and connected-device designs that need USB device or serial connectivity without adopting a larger microcontroller. Its 50 MHz Cortex-M0 core and 40 KB flash provide room for embedded control and communication firmware, while 8 KB SRAM supports runtime data and protocol buffers. The 3.3 V to 3.6 V operating range integrates naturally into regulated 3.3 V systems.
What is the best NXP equivalent for LPC11U34FHN33/311?
The closest documented NXP choice is the LPC11U34FHN33 base ordering designation, which corresponds to the LPC11U34FHN33/311 device in the product and distributor records. It preserves the same confirmed 50 MHz Cortex-M0 core, 40 KB flash, 8 KB SRAM, and HVQFN package configuration. A third-party equivalent cannot be treated as drop-in unless its complete terminal map, memory configuration, supply limits, and peripheral behavior are verified against the NXP datasheet.
LPC11U34FHN33/311 vs STM8S003K3T3TR — which fits a low-cost control design?
The LPC11U34FHN33/311 offers a 32-bit Arm Cortex-M0 core running up to 50 MHz with 40 KB flash and 8 KB SRAM, while the STM8S003K3T3TR is a different architecture and package family. The comparison therefore does not establish drop-in compatibility. Choose the LPC11U34FHN33/311 for Cortex-M0 software ecosystems and USB/USART-connected control; consider an STM8 device only when its smaller memory use and native peripheral requirements justify a redesign.
LPC11U34FHN33/311 vs LPC11U24FHN33 — which is better for firmware-heavy applications?
The LPC11U34FHN33/311 is the better choice when firmware size is the deciding factor because it provides 40 KB of flash, whereas the LPC11U24FHN33 is the lower-memory member of the family. Both belong to the LPC11Uxx platform, but the reduced flash capacity of the 24 KB variant may force code reduction, optimization, or external storage. Confirm exact electrical ratings, pin availability, and package compatibility in the manufacturer documentation.
How much flash and SRAM does LPC11U34FHN33/311 provide?
The LPC11U34FHN33/311 provides 40 KB of flash memory and 8 KB of SRAM according to the exact-device distributor records and the NXP product-page context. The flash stores firmware and nonvolatile constants, while SRAM provides working memory during execution. Before finalizing a design, reserve space for the bootloader, interrupt vectors, stack, heap, and application data rather than treating the full 8 KB SRAM as permanently available.
What peripherals are available on LPC11U34FHN33/311?
The exact device is identified as an ARM Cortex-M0 MCU with USB device and USART functionality, and it belongs to the LPC11Uxx family whose broader peripheral set can include I2C, SSP, PWM timers, an ADC, and general-purpose I/O. The precise number of each peripheral connected to this ordering option must be confirmed from the NXP pin and peripheral tables. Do not infer that every maximum count in the LPC11Uxx family applies to LPC11U34FHN33/311.
Does LPC11U34FHN33/311 support Arm Keil development?
Yes, the LPC11U34FHN33/311 is listed in the Arm Keil device-support catalog with a Cortex-M0 core, 50 MHz operating frequency, and the LPC1100_DFP CMSIS Pack. The LPC1100 series is positioned for low-cost embedded-control applications, including metering, lighting, alarm systems, consumer peripherals, and mobile-device accessories. The CMSIS Pack supplies device descriptions and startup support for integrating the MCU into an Arm-based development environment.
Where to buy LPC11U34FHN33/311 and what is its lead time?
Use the Request a Quote form on this page to request the LPC11U34FHN33/311, current availability, minimum order quantity, and production lead time. The part is listed as active by NXP, but live stock and delivery schedules can vary by order quantity and packaging code. The page’s commercial workflow provides a direct quotation path without relying on a static price that may quickly become outdated.
Is LPC11U34FHN33/311 currently active?
The NXP product page lists LPC11U34FHN33 as Active. The LPC11U34FHN33/311 ordering designation is shown in current distributor records with matching core, memory, and package information. Before committing to a long-running production program, review the manufacturer product-change notices and ordering-information documents for any revisions affecting packing, qualification, or supply continuity.

Impormasyon ng Talumpati sa Engineering for LPC11U34FHN33/311 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the LPC11U34FHN33/311 for a compact embedded design that requires an Arm Cortex-M0 core at up to 50 MHz, 40 KB of flash, 8 KB of SRAM, USB device connectivity, USART, and a 3.3 V-to-3.6 V operating range. It is well matched to metering, lighting, alarm, consumer-peripheral, and IoT-control products with a modest memory budget. The base LPC11U34FHN33 is the preferred alternative when that ordering designation is the approved purchasing configuration; it retains the same processor, memory, and package characteristics. Do not select a cross-manufacturer MCU merely because its flash and clock ratings look similar: USB pin mapping, peripheral multiplexing, voltage references, interrupts, and firmware configuration differ materially. If the product exceeds 8 KB of simultaneous SRAM, requires substantially more flash, or needs a larger GPIO set, move to a more capable microcontroller rather than forcing the LPC11U34FHN33/311.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto LPC11U34FHN33
Brand NXP Semiconductors NXP Semiconductors
Package 32-HVQFN (7 mm × 7 mm) 32-HVQFN (7 mm × 7 mm)
Processor Core Arm Cortex-M0, 32-bit Arm Cortex-M0, 32-bit
Maximum CPU Frequency 50 MHz 50 MHz
Flash Memory 40 KB 40 KB
SRAM 8 KB 8 KB
USB Support USB device controller USB device controller
Serial Interface USART USART

Pangunahing mga Pagkakaiba

  • Combines 50 MHz Cortex-M0 performance with USB device connectivity (kumpara saLPC11U34FHN33)
  • Provides 40 KB of flash for compact embedded firmware (kumpara saLPC11U34FHN33)
  • Uses 8 KB of SRAM and the same compact HVQFN footprint (kumpara saLPC11U34FHN33)
  • Supports the LPC1100_DFP device pack for Arm Keil workflows (kumpara saLPC11U34FHN33)

Talaan ng Disenyo

Use the exact NXP HVQFN land pattern and pin-one orientation for the LPC11U34FHN33/311. The package is listed as 7 mm by 7 mm with a 0.65 mm terminal pitch, although catalog records describe a 33-terminal physical arrangement under the 32-HVQFN designation. Confirm whether the center terminal is the exposed pad, how many perimeter leads are used, and the permitted paste and solder-mask geometry before releasing artwork or placing the part.

Design the power rail around the confirmed 3.3 V to 3.6 V operating range. Place the required local bypass capacitors close to the device supply and ground terminals, and route the return current through the shortest practical path. The value of every input, output, and decoupling capacitor must be checked against the NXP datasheet’s recommended application circuit; those component values are not established by the catalog listing.

Do not assign peripheral functions solely from the LPC11Uxx family overview. The family can support interfaces such as I2C, SSP, PWM timers, an ADC, and numerous GPIO pins, but the exact LPC11U34FHN33/311 terminal map determines which functions are available on which pins. Compare the complete pin-description table with the desired schematic, and reserve debugger and boot-related pins before placing external circuitry.

The 0.65 mm terminal pitch can complicate assembly, inspection, and hand rework. Confirm the PCB manufacturer’s minimum line width, spacing, via-in-pad policy, and solder-mask bridge tolerances. A stencil design should follow the manufacturer’s land pattern rather than a generic HVQFN footprint. Likewise, avoid routing high-speed or high-current signals beneath the device unless the package and return-path configuration specifically support that practice.

The 8 KB SRAM can become the limiting resource in USB, USART, or simultaneous sensor-processing workloads. Estimate peak heap use, stack depth, DMA buffers, and communication queues during worst-case operation, then leave margin rather than sizing the design directly to the full 8 KB. Use the Cortex-M0 memory map and linker configuration in the LPC1100_DFP to detect overflows early.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The NXP product page lists the device as Active, but the available product records do not explicitly establish the requested environmental or material-compliance classifications. AEC-Q100 status is recorded as unknown because the target ordering code is not identified as an automotive-qualified variant.

Data napatotohanan sa: 2026-11-20 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

LPC11U34FHN33/311 datasheet LPC11U34FHN33 datasheet pdf LPC11U34FHN33/311 pinout LPC11U34FHN33/311 equivalent LPC11U34FHN33/311 replacement LPC11U34FHN33/311 footprint NXP LPC11U34FHN33/311 LPC11U34FHN33 50MHz Cortex-M0 LPC11U34FHN33 40KB flash 8KB SRAM LPC11U34FHN33/311 price LPC11U34FHN33/311 stock LPC11U34FHN33 vs LPC11U24FHN33 LPC11U34FHN33 USB USART application LPC11U34FHN33 Arm Keil CMSIS pack

Mga kaugnay na Mga Komponente at mga Tuntunin

NXP Semiconductors LPC11U34FHN33/311 LPC11U34FHN33 LPC11Uxx LPC1100 series Arm Cortex-M0 Arm Keil CMSIS Pack LPC1100_DFP microcontroller MCU embedded controller semiconductor 32-bit microcontroller 40 KB flash memory 8 KB SRAM USB device controller USART HVQFN-32 surface-mount package 3.3 V supply eMetering lighting control alarm systems consumer peripherals IoT sensor nodes
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ