NXP Semiconductors

LPC1316FBD48 - 72MHz Arm Cortex-M3 MCU | NXP | USB

MPN: LPC1316FBD48 ✓ Aktif
48-LQFP, 7 x 7 mm Package 72 MHz Speed 48 KB Memory
MOQ: 1 |

LPC1316FBD48 Ringkasan

The NXP Semiconductors LPC1316FBD48 is a 32-bit Arm Cortex-M3 microcontroller for embedded applications, operating at up to 72 MHz with 48 KB of flash, 8 KB of SRAM, and USB connectivity in a 48-LQFP 7 x 7 mm package. Its combination of a 72 MHz processor, integrated USB device support, and low-power operation makes it suitable for compact control, communications, and data-acquisition products.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one device. The LPC1316FBD48 belongs to the 32-bit microcontroller hierarchy, using the Arm Cortex-M3 core with enhanced debug support and an integrated support-block architecture. This category provides embedded systems with more processing capability than simple 8-bit controllers while retaining low cost, low power, and deterministic real-time operation.

The device provides 48 KB of program flash, 8 KB of SRAM, USB device support, USART, and EEPROM. The 72 MHz Cortex-M3 core supports floating-point instructions and efficient exception handling for responsive control loops. Its integrated USB capability reduces external interface-component requirements in portable data-collection and human-interface devices, while serial communications support links to sensors, modules, and external converters.

The LPC1316 family combines a common Arm Cortex-M3 platform with low-power operating characteristics and a high level of peripheral integration. The 48-LQFP package exposes the microcontroller's GPIO, communications, timing, and power-related connections in a conventional surface-mount footprint. Because the target is specified as the LPC1316FBD48 variant, its listed memory configuration is 48 KB flash and 8 KB SRAM rather than the maximum configuration associated with other members of the broader LPC13xx range.

Typical uses include USB-connected industrial data loggers, compact sensor interfaces, serial-to-digital gateways, access-control terminals, and embedded control modules. The 72 MHz processing rate is useful for protocol handling and real-time peripheral management, while USB can provide both power and a standard host interface in portable equipment.

Designers should preserve the recommended power, clock, decoupling, and programming-interface connections from the manufacturer datasheet. Firmware planning should include adequate flash and SRAM headroom, and USB firmware must account for clocking and bus-power requirements. The LQFP footprint also requires a land pattern designed for its 0.5 mm pitch and a thermal design suitable for the board's ambient environment.

This product page organizes the principal LPC1316FBD48 specifications, engineering application guidance, datasheet links, and genuine same-package family alternatives. It also distinguishes exact drop-in candidates from merely similar microcontrollers, helping engineers evaluate board reuse without assuming that compatibility across different cores, peripherals, packages, or memory sizes is automatic.

Alternatif penggantian untuk LPC1316FBD48 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian LPC1316FBD48 (sama faktor bentuk dan footprint) — berbeda di dalam Package.

NXP Semiconductors
Package: 48-LQFP (7x7 mm)
Bandingkan dengan LPC1316FBD48 →

LPC1314FBD48

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 48-LQFP (7x7)
Flash is 24 KB versus 48 KB (-50%) and SRAM is 4 KB versus 8 KB (-50%); CPU remains 72 MHz and the package remains 48-LQFP.

📋 Alternatif referensi (tidak dalam katalog)

LPC1315FBD48,551

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
NXP Semiconductors
📦 48-LQFP (7x7)
ARM Cortex-M3 · 32-Bit · 72 MHz · 32 KB (32K x 8) · FLASH · 8 KB · 32 bit · Harvard, 3-stage pipeline

Kontak untuk harga

Lihat Datasheet →

LPC1317FBD48

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 48-LQFP (7x7)
Flash is 64 KB versus 48 KB (+33.3%) and SRAM is 12 KB versus 8 KB (+50%); CPU remains 72 MHz and the package remains 48-LQFP.

📋 Alternatif referensi (tidak dalam katalog)

LPC1316FBD48 Rating Maksimal & Karakteristik Listrik

Product Type 32-bit ARM Cortex-M3 microcontroller
CPU Core Arm Cortex-M3
Maximum CPU Frequency 72 MHz
Architecture 32-bit
Program Flash 48 KB
SRAM 8 KB
USB Support USB device
Serial Interface USART
Paket 48-LQFP, 7 x 7 mm
Tipe Mounting Surface mount
Status Lingkungan Hidup Active

LPC1316FBD48 48-lqfp, 7 x 7 mm Diamant Konfigurasi Panduan

Konfigurasi pin untuk LPC1316FBD48 (48-lqfp, 7 x 7 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 48-lqfp, 7 x 7 mm untuk LPC1316FBD48

Tidak ada data diatribut pin yang tersedia untuk LPC1316FBD48.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

LPC1316FBD48 cocok untuk 6 aplikasis: USB Connected Data Logger, Industrial Sensor Interface, Serial-to-USB Gateway, Access-Control Terminal, Portable Medical Monitoring Module, Embedded Control Module.

🖥️

USB Connected Data Logger

The LPC1316FBD48 fits a compact USB data logger because its Arm Cortex-M3 core operates at up to 72 MHz and the device includes USB device connectivity, 48 KB of flash, and 8 KB of SRAM. The processor can acquire sensor data, timestamp events, maintain a communication protocol, and transfer records to a host. A practical design uses DMA-driven peripheral acquisition and stores buffered data in the 8 KB SRAM before USB transmission. The memory budget requires attention because stack, USB descriptors, and application buffers share the same working RAM. For a design that regularly buffers larger records, LPC1317FBD48 offers 12 KB of SRAM, although it must be reviewed as a family upgrade rather than assumed to preserve every peripheral assignment.

🏭

Industrial Sensor Interface

The LPC1316FBD48 is appropriate for an industrial sensor interface that must combine timing-sensitive acquisition with low-power embedded processing. Its 72 MHz Arm Cortex-M3 core provides ample instruction throughput for digital filtering, status handling, and serial protocol management, while the integrated USART supports connection to external sensors or transceivers. The 48 KB flash can hold application firmware, calibration tables, and update logic, although 8 KB of SRAM should be reserved carefully for acquisition buffers. A robust implementation should use timer-triggered sampling, buffered USART transfers, and a defined brownout and reset strategy. The manufacturer positions the LPC1316 as a low-power, highly integrated embedded controller, making it suitable for compact sensor nodes that communicate locally rather than requiring a separate interface processor.

🌐

Serial-to-USB Gateway

The LPC1316FBD48 works well in a serial-to-USB gateway because USB device support and USART communication are integrated into the same microcontroller. At 72 MHz, the Cortex-M3 core can frame and validate incoming serial data while maintaining the USB protocol stack and host enumeration requirements. The 48 KB flash is useful for gateway firmware, descriptor tables, and protocol conversion logic, while 8 KB of SRAM supports command buffers and transient USB data. Use hardware flow control when the selected USART and external transceiver support it, and place interface protection close to the connector. If firmware growth or larger USB packet buffering becomes limiting, LPC1317FBD48 adds 16 KB of flash and 4 KB of SRAM without changing the 48-LQFP family package.

🔐

Access-Control Terminal

The LPC1316FBD48 can serve as the controller in a compact access-control terminal requiring digital credential handling, status LEDs, keypad or reader input, and serial communication with a door controller. Its 72 MHz Cortex-M3 core provides ample performance for protocol parsing and event management, while USB device support enables configuration or diagnostic connectivity. The 48 KB flash accommodates application code and credential tables, although the 8 KB SRAM should be allocated carefully to avoid contention between protocol buffers and real-time tasks. A production design should isolate credential storage, define secure firmware-update behavior, and validate all external reader interfaces electrically. The same 48-LQFP package also simplifies PCB reuse between LPC1315, LPC1316, and LPC1317 variants, subject to memory and peripheral verification.

💊

Portable Medical Monitoring Module

The LPC1316FBD48 is suitable for a portable monitoring module when low-power operation, compactness, and local data processing are priorities. The microcontroller can sample sensors, perform basic filtering, maintain event logs, and expose configuration or data through USB. Its 72 MHz Cortex-M3 core handles multiple peripheral tasks, while 48 KB of flash stores firmware and 8 KB of SRAM provides limited but workable working space for short acquisition windows. Designers should partition the RAM map, use the lowest justified clock rate, and keep analog signal conditioning outside the digital controller. The 48-LQFP package is compact but requires a thermal-aware PCB layout. Because medical product requirements extend beyond semiconductor specifications, the complete module must undergo the applicable product-level safety and reliability validation.

🔧

Embedded Control Module

The LPC1316FBD48 fits an embedded control module that executes deterministic peripheral routines while exchanging status information over USART or USB. Its 72 MHz Arm Cortex-M3 core supports responsive task scheduling, communication framing, and control-loop computation, while the low-power focus suits battery- or line-powered modules that spend substantial time idle. The 48 KB flash provides useful code space for control logic and boot features, and the 8 KB SRAM can support bounded task stacks and communication buffers. For mixed-speed peripherals, use the chip's timer and interrupt resources to establish deterministic timing rather than relying on blocking delays. Pin assignment, clocking, and power behavior must follow the manufacturer datasheet exactly, especially when converting an existing board from LPC1315FBD48 or LPC1317FBD48.

Ringkasan Produk Direkomendasikan

LPC1317FBD48 Same-family option with 64 KB flash and 12 KB SRAM Digunakan di dalam: USB Connected Data Logger, Serial-to-USB Gateway, Access-Control Terminal, Portable Medical Monitoring Module, Embedded Control Module LPC1315FBD48 Same-package 72 MHz family option with 32 KB flash and 8 KB SRAM Digunakan di dalam: Industrial Sensor Interface, Access-Control Terminal, Embedded Control Module
What is the LPC1316FBD48?
The LPC1316FBD48 is a 32-bit Arm Cortex-M3 microcontroller from NXP Semiconductors that operates at up to 72 MHz and combines 48 KB of flash, 8 KB of SRAM, USB device support, and USART communication in a 48-LQFP package. According to the NXP product information, it is designed for embedded applications requiring high integration and low power consumption. Its processor, memory, USB interface, and serial communications are integrated on one device, reducing the component count of connected control products.
What are the key specifications of LPC1316FBD48 that engineers should know?
The principal LPC1316FBD48 specifications are a 72 MHz Arm Cortex-M3 core, 48 KB of flash, 8 KB of SRAM, USB device support, USART, and a 48-LQFP 7 x 7 mm package. NXP identifies the device as a low-power embedded microcontroller. The 72 MHz core supports responsive control and communication tasks, while 8 KB of SRAM requires careful allocation for stacks, buffers, and real-time data.
What is the operating voltage of LPC1316FBD48?
The LPC1316FBD48 operating voltage range must be confirmed in the NXP manufacturer datasheet before power-supply or signal-level design is finalized. The manufacturer product information confirms a 72 MHz Arm Cortex-M3 architecture, 48 KB flash, 8 KB SRAM, USB device support, and a 48-LQFP package, but it does not state the voltage limits in the product listing. Use the datasheet's supply-voltage table and absolute-maximum ratings as the controlling design references.
Where can I download the LPC1316FBD48 datasheet PDF?
The LPC1316FBD48 datasheet PDF can be obtained from NXP's product page at https://www.nxp.com/products/LPC1316FBD48 or through the indexed datasheet document linked at https://www.alldatasheet.com/datasheet-pdf/pdf/513980/NXP/LPC1316FBD48.html. The manufacturer document is the preferred source for the complete pin description, memory map, electrical characteristics, clock requirements, USB implementation, and recommended application circuit.
Where is the LPC1316FBD48 pinout located?
The LPC1316FBD48 pinout is located in the pin-description table and package drawing in the NXP manufacturer datasheet. The device uses a 48-LQFP package with a 7 x 7 mm body. Assign PCB nets directly from the datasheet rather than relying on a generic LQFP symbol, because exposed multiplexing, debug functions, clock sources, power pins, and ground assignments determine whether the footprint is electrically correct.
What can replace the LPC1316FBD48?
The closest supported replacements are qualified members of the LPC131x family in the same 48-LQFP footprint, but firmware, memory, and peripheral differences must be checked before replacement. LPC1314FBD48, LPC1315FBD48, and LPC1317FBD48 are same-family candidates, while the LPC1317 offers additional flash and SRAM. Treat these as design-review candidates rather than automatic substitutions until the manufacturer pin and peripheral tables confirm compatibility.
Is LPC1316FBD48 suitable for USB data-logging devices?
The LPC1316FBD48 is suitable for a compact USB data logger when its 48 KB flash, 8 KB SRAM, 72 MHz Cortex-M3 core, and USB device support satisfy the design. The processor can manage sensor acquisition, buffering, and USB protocol handling, although the SRAM budget is modest. NXP identifies USB device functionality and low-power operation as core capabilities of this microcontroller family.
What is the difference between LPC1316FBD48 and LPC1317FBD48?
The LPC1316FBD48 and LPC1317FBD48 are both 72 MHz Arm Cortex-M3 devices in the same 48-LQFP family, but their memory capacities differ. LPC1316FBD48 has 48 KB of flash and 8 KB of SRAM, while LPC1317FBD48 provides 64 KB of flash and 12 KB of SRAM. The LPC1317 therefore adds 16 KB of flash and 4 KB of SRAM, making it preferable when the additional working memory reduces buffering or code-size pressure.
Is LPC1314FBD48 a drop-in replacement for LPC1316FBD48?
LPC1314FBD48 is a same-package family candidate for LPC1316FBD48, but it should not be treated as an automatic drop-in replacement. Both use the 48-LQFP 7 x 7 mm package and the Arm Cortex-M3 platform, while LPC1314FBD48 provides 24 KB of flash and 4 KB of SRAM. That is 24 KB less flash and 4 KB less SRAM than LPC1316FBD48, so firmware size and RAM requirements must fit before PCB reuse is approved.
When should I choose LPC1316FBD48 over LPC1315FBD48?
Choose LPC1316FBD48 over LPC1315FBD48 when the application benefits from 48 KB of flash and 8 KB of SRAM instead of 32 KB of flash and 8 KB of SRAM. Both devices operate at up to 72 MHz and use the same 48-LQFP package, so the decision can remain package-compatible. LPC1316 provides 16 KB more flash for protocol libraries, boot code, or feature expansion while retaining the same SRAM capacity.
Can an STM32 or other Cortex-M MCU replace LPC1316FBD48?
An STM32 or another Cortex-M microcontroller cannot be assumed to replace LPC1316FBD48 without a complete peripheral and pin-level review. Although both devices may use an Arm Cortex-M3 core, package pins, voltage limits, USB implementation, peripheral mapping, startup code, and firmware support differ between vendors. The LPC131x family is the safer route for board reuse because it preserves the NXP device architecture and package organization.
How do I choose an LPC1316FBD48 replacement for an existing PCB?
Choose an LPC1316FBD48 replacement by first confirming the 48-LQFP 7 x 7 mm footprint, then checking flash, SRAM, CPU frequency, USB, USART, clock, power, and pin multiplexing. LPC1315FBD48, LPC1317FBD48, and LPC1314FBD48 are the principal same-family candidates to evaluate. Confirm each candidate against the NXP pin and peripheral tables, then port the startup, linker, clock, USB, and interrupt code before production release.
Where can I buy LPC1316FBD48 and check its current lead time?
Use the Request a Quote form on this page to ask for LPC1316FBD48 availability, current lead time, minimum order quantity, and package quantity. The manufacturer lists LPC1316FBD48 as active, and distributor listings show the part in a 48-LQFP package. Current production allocation and shipment timing should be confirmed through the quote request rather than relying on a stale listing or an unverified stock statement.
What is the price of LPC1316FBD48?
Use the Request a Quote form on this page for the current LPC1316FBD48 price and quantity breaks. The available product listing includes a unit-price indication, but it does not provide an explicit quantity-break table for the exact MPN, so no static price tier is reproduced in the structured data. A quote request allows current pricing, stock status, packaging, and lead time to be confirmed together.
Is LPC1316FBD48 in stock?
The LPC1316FBD48 is listed as active by NXP, while current stock should be confirmed through the Request a Quote form on this page. Some distributor listings indicate available inventory, but stock levels can change independently of lifecycle status and may differ by reel, tray, or order quantity. Submit the exact MPN with your required package, quantity, and delivery location to obtain a current availability answer.
How much power does the LPC1316FBD48 consume?
The LPC1316FBD48 is designed for low-power embedded operation, but its operating current depends on CPU activity, clock configuration, USB state, peripherals, voltage, and temperature. Use the NXP manufacturer datasheet for operating-current and power-mode limits. For an energy estimate, measure the relevant modes on the finished board rather than combining maximum ratings that may represent mutually exclusive operating conditions.

Data referensi engineering untuk LPC1316FBD48 — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the LPC1316FBD48 when an embedded design needs a 72 MHz Arm Cortex-M3, USB device connectivity, USART, 48 KB of flash, and 8 KB of SRAM in a 48-LQFP footprint. Choose LPC1317FBD48 when code size, USB buffering, or future features require another 16 KB of flash and 4 KB of SRAM. Choose LPC1315FBD48 when 32 KB of flash is sufficient and the lower memory demand better matches the product. LPC1314FBD48 is appropriate only for substantially smaller firmware because it provides 24 KB of flash and 4 KB of SRAM. For any substitution, verify the pin table, USB and USART features, clocks, power pins, peripheral mapping, and firmware dependencies. The package match supports PCB reuse, but it does not by itself prove electrical or software compatibility.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini LPC1314FBD48 LPC1315FBD48 LPC1317FBD48
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 48-LQFP (7x7) 48-LQFP (7x7) - same 48-LQFP (7x7) - same 48-LQFP (7x7) - same
CPU Core Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3
Maximum CPU Frequency 72 MHz 72 MHz 72 MHz 72 MHz
Program Flash 48 KB 24 KB 32 KB 64 KB
SRAM 8 KB 4 KB 8 KB 12 KB
Architecture 32-bit 32-bit 32-bit 32-bit

Diferensiator Kunci

  • Balanced memory capacity within the LPC131x 48-LQFP family (vsLPC1315FBD48)
  • Higher working-memory option in the same package (vsLPC1314FBD48)
  • Lower memory footprint than the higher-capacity family member (vsLPC1317FBD48)

Catatan Desain

Create the PCB footprint from the NXP 48-LQFP 7 x 7 mm package drawing rather than a generic LQFP library item. Confirm body size, lead span, pin pitch, pin-1 orientation, solder-mask clearance, and paste-land dimensions against the manufacturer datasheet. Keep the USB differential pair, oscillator connections, reset network, and decoupling layout exactly as recommended for the selected board stack-up.

Place the required input and internal bypass capacitors close to their associated power pins, with the shortest return path and no plane split beneath the device unless the datasheet permits it. Establish the local power budget from the operating mode and peripheral load rather than using a single maximum-current value. Validate startup, USB bus-power behavior, brownout response, and regulator headroom at the lowest input voltage.

Assign every GPIO, communication signal, clock, reset, and ground connection from the datasheet pin table, including alternate-function and reserved-pin requirements. The 8 KB SRAM is a significant design constraint: budget stacks, interrupt context, USB buffers, and application variables separately. Consider LPC1317FBD48 when the firmware or RAM map no longer fits, and recheck peripheral assignments even though its package is the same.

Do not treat another Cortex-M3 microcontroller as an automatic replacement merely because the CPU instruction set is related. A board migration requires matching the package pins, power pins, oscillator arrangement, USB routing, peripheral mapping, memory configuration, startup code, linker configuration, and interrupt vector expectations. For the closest candidates, use the LPC131x family and verify each changed peripheral against the NXP documentation.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The manufacturer product information identifies LPC1316FBD48 as an active embedded microcontroller but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

Data disahkan pada: 2026-11-10 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

LPC1316FBD48 datasheet LPC1316FBD48 pinout LPC1316FBD48 datasheet pdf LPC1316FBD48 equivalent LPC1316FBD48 replacement LPC1316FBD48 cross reference LPC1316FBD48 vs LPC1317FBD48 LPC1316FBD48 footprint LPC1316FBD48 reference manual LPC1316FBD48 price LPC1316FBD48 stock NXP LPC1316FBD48 LPC1316FBD48 USB microcontroller LPC1316FBD48 48-LQFP pinout LPC1316FBD48 application circuit

Komponen dan Istilah Terkait

NXP Semiconductors LPC1316FBD48 LPC1314FBD48 LPC1315FBD48 LPC1317FBD48 Arm Arm Cortex-M3 32-bit microcontroller embedded microcontroller microcontroller semiconductor USB device Universal Serial Bus USART Universal Synchronous/Asynchronous Receiver/Transmitter 48 KB flash 8 KB SRAM 72 MHz 48-LQFP LQFP package family surface-mount package embedded control industrial sensor interface USB data logger low-power embedded processing
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ