LPC1316FBD48 - 72MHz Arm Cortex-M3 MCU | NXP | USB
MPN: LPC1316FBD48 ✓ 啟用中LPC1316FBD48 概覽
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one device. The LPC1316FBD48 belongs to the 32-bit microcontroller hierarchy, using the Arm Cortex-M3 core with enhanced debug support and an integrated support-block architecture. This category provides embedded systems with more processing capability than simple 8-bit controllers while retaining low cost, low power, and deterministic real-time operation.
The device provides 48 KB of program flash, 8 KB of SRAM, USB device support, USART, and EEPROM. The 72 MHz Cortex-M3 core supports floating-point instructions and efficient exception handling for responsive control loops. Its integrated USB capability reduces external interface-component requirements in portable data-collection and human-interface devices, while serial communications support links to sensors, modules, and external converters.
The LPC1316 family combines a common Arm Cortex-M3 platform with low-power operating characteristics and a high level of peripheral integration. The 48-LQFP package exposes the microcontroller's GPIO, communications, timing, and power-related connections in a conventional surface-mount footprint. Because the target is specified as the LPC1316FBD48 variant, its listed memory configuration is 48 KB flash and 8 KB SRAM rather than the maximum configuration associated with other members of the broader LPC13xx range.
Typical uses include USB-connected industrial data loggers, compact sensor interfaces, serial-to-digital gateways, access-control terminals, and embedded control modules. The 72 MHz processing rate is useful for protocol handling and real-time peripheral management, while USB can provide both power and a standard host interface in portable equipment.
Designers should preserve the recommended power, clock, decoupling, and programming-interface connections from the manufacturer datasheet. Firmware planning should include adequate flash and SRAM headroom, and USB firmware must account for clocking and bus-power requirements. The LQFP footprint also requires a land pattern designed for its 0.5 mm pitch and a thermal design suitable for the board's ambient environment.
This product page organizes the principal LPC1316FBD48 specifications, engineering application guidance, datasheet links, and genuine same-package family alternatives. It also distinguishes exact drop-in candidates from merely similar microcontrollers, helping engineers evaluate board reuse without assuming that compatibility across different cores, peripherals, packages, or memory sizes is automatic.
直接替換替代品,適用於 LPC1316FBD48 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: LPC1316FBD48 (相同外形與佔位) — 差異在於 Package.
LPC1314FBD48
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
LPC1315FBD48,551
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →LPC1317FBD48
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
LPC1316FBD48 最大額定值與電氣特性
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| CPU Core | Arm Cortex-M3 |
| Maximum CPU Frequency | 72 MHz |
| Architecture | 32-bit |
| Program Flash | 48 KB |
| SRAM | 8 KB |
| USB Support | USB device |
| Serial Interface | USART |
| 封裝 | 48-LQFP, 7 x 7 mm |
| 安裝類型 | Surface mount |
| 生命週期狀態 | Active |
LPC1316FBD48 48-lqfp, 7 x 7 mm 腳位配置指南
LPC1316FBD48(48-lqfp, 7 x 7 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: LPC1316FBD48.
請參閱 資料表 以查看完整腳位配置。
典型應用
LPC1316FBD48 適用於 6 應用s: USB Connected Data Logger, Industrial Sensor Interface, Serial-to-USB Gateway, Access-Control Terminal, Portable Medical Monitoring Module, Embedded Control Module.
USB Connected Data Logger
The LPC1316FBD48 fits a compact USB data logger because its Arm Cortex-M3 core operates at up to 72 MHz and the device includes USB device connectivity, 48 KB of flash, and 8 KB of SRAM. The processor can acquire sensor data, timestamp events, maintain a communication protocol, and transfer records to a host. A practical design uses DMA-driven peripheral acquisition and stores buffered data in the 8 KB SRAM before USB transmission. The memory budget requires attention because stack, USB descriptors, and application buffers share the same working RAM. For a design that regularly buffers larger records, LPC1317FBD48 offers 12 KB of SRAM, although it must be reviewed as a family upgrade rather than assumed to preserve every peripheral assignment.
推薦
Industrial Sensor Interface
The LPC1316FBD48 is appropriate for an industrial sensor interface that must combine timing-sensitive acquisition with low-power embedded processing. Its 72 MHz Arm Cortex-M3 core provides ample instruction throughput for digital filtering, status handling, and serial protocol management, while the integrated USART supports connection to external sensors or transceivers. The 48 KB flash can hold application firmware, calibration tables, and update logic, although 8 KB of SRAM should be reserved carefully for acquisition buffers. A robust implementation should use timer-triggered sampling, buffered USART transfers, and a defined brownout and reset strategy. The manufacturer positions the LPC1316 as a low-power, highly integrated embedded controller, making it suitable for compact sensor nodes that communicate locally rather than requiring a separate interface processor.
推薦
Serial-to-USB Gateway
The LPC1316FBD48 works well in a serial-to-USB gateway because USB device support and USART communication are integrated into the same microcontroller. At 72 MHz, the Cortex-M3 core can frame and validate incoming serial data while maintaining the USB protocol stack and host enumeration requirements. The 48 KB flash is useful for gateway firmware, descriptor tables, and protocol conversion logic, while 8 KB of SRAM supports command buffers and transient USB data. Use hardware flow control when the selected USART and external transceiver support it, and place interface protection close to the connector. If firmware growth or larger USB packet buffering becomes limiting, LPC1317FBD48 adds 16 KB of flash and 4 KB of SRAM without changing the 48-LQFP family package.
推薦
Access-Control Terminal
The LPC1316FBD48 can serve as the controller in a compact access-control terminal requiring digital credential handling, status LEDs, keypad or reader input, and serial communication with a door controller. Its 72 MHz Cortex-M3 core provides ample performance for protocol parsing and event management, while USB device support enables configuration or diagnostic connectivity. The 48 KB flash accommodates application code and credential tables, although the 8 KB SRAM should be allocated carefully to avoid contention between protocol buffers and real-time tasks. A production design should isolate credential storage, define secure firmware-update behavior, and validate all external reader interfaces electrically. The same 48-LQFP package also simplifies PCB reuse between LPC1315, LPC1316, and LPC1317 variants, subject to memory and peripheral verification.
推薦
Portable Medical Monitoring Module
The LPC1316FBD48 is suitable for a portable monitoring module when low-power operation, compactness, and local data processing are priorities. The microcontroller can sample sensors, perform basic filtering, maintain event logs, and expose configuration or data through USB. Its 72 MHz Cortex-M3 core handles multiple peripheral tasks, while 48 KB of flash stores firmware and 8 KB of SRAM provides limited but workable working space for short acquisition windows. Designers should partition the RAM map, use the lowest justified clock rate, and keep analog signal conditioning outside the digital controller. The 48-LQFP package is compact but requires a thermal-aware PCB layout. Because medical product requirements extend beyond semiconductor specifications, the complete module must undergo the applicable product-level safety and reliability validation.
推薦
Embedded Control Module
The LPC1316FBD48 fits an embedded control module that executes deterministic peripheral routines while exchanging status information over USART or USB. Its 72 MHz Arm Cortex-M3 core supports responsive task scheduling, communication framing, and control-loop computation, while the low-power focus suits battery- or line-powered modules that spend substantial time idle. The 48 KB flash provides useful code space for control logic and boot features, and the 8 KB SRAM can support bounded task stacks and communication buffers. For mixed-speed peripherals, use the chip's timer and interrupt resources to establish deterministic timing rather than relying on blocking delays. Pin assignment, clocking, and power behavior must follow the manufacturer datasheet exactly, especially when converting an existing board from LPC1315FBD48 or LPC1317FBD48.
推薦
推薦產品摘要
工程參考資料,適用於 LPC1316FBD48 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LPC1314FBD48 | LPC1315FBD48 | LPC1317FBD48 |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 48-LQFP (7x7) | 48-LQFP (7x7) - same | 48-LQFP (7x7) - same | 48-LQFP (7x7) - same |
| CPU Core | Arm Cortex-M3 | Arm Cortex-M3 | Arm Cortex-M3 | Arm Cortex-M3 |
| Maximum CPU Frequency | 72 MHz | 72 MHz | 72 MHz | 72 MHz |
| Program Flash | 48 KB | 24 KB | 32 KB | 64 KB |
| SRAM | 8 KB | 4 KB | 8 KB | 12 KB |
| Architecture | 32-bit | 32-bit | 32-bit | 32-bit |
主要差異化特點
- Balanced memory capacity within the LPC131x 48-LQFP family (對比LPC1315FBD48)
- Higher working-memory option in the same package (對比LPC1314FBD48)
- Lower memory footprint than the higher-capacity family member (對比LPC1317FBD48)
設計說明
Create the PCB footprint from the NXP 48-LQFP 7 x 7 mm package drawing rather than a generic LQFP library item. Confirm body size, lead span, pin pitch, pin-1 orientation, solder-mask clearance, and paste-land dimensions against the manufacturer datasheet. Keep the USB differential pair, oscillator connections, reset network, and decoupling layout exactly as recommended for the selected board stack-up.
Place the required input and internal bypass capacitors close to their associated power pins, with the shortest return path and no plane split beneath the device unless the datasheet permits it. Establish the local power budget from the operating mode and peripheral load rather than using a single maximum-current value. Validate startup, USB bus-power behavior, brownout response, and regulator headroom at the lowest input voltage.
Assign every GPIO, communication signal, clock, reset, and ground connection from the datasheet pin table, including alternate-function and reserved-pin requirements. The 8 KB SRAM is a significant design constraint: budget stacks, interrupt context, USB buffers, and application variables separately. Consider LPC1317FBD48 when the firmware or RAM map no longer fits, and recheck peripheral assignments even though its package is the same.
Do not treat another Cortex-M3 microcontroller as an automatic replacement merely because the CPU instruction set is related. A board migration requires matching the package pins, power pins, oscillator arrangement, USB routing, peripheral mapping, memory configuration, startup code, linker configuration, and interrupt vector expectations. For the closest candidates, use the LPC131x family and verify each changed peripheral against the NXP documentation.
合規資訊
The manufacturer product information identifies LPC1316FBD48 as an active embedded microcontroller but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.