LPC1342FBD48 - 72MHz Cortex-M3 MCU | NXP Semiconductors
MPN: LPC1342FBD48 ✓ AktifLPC1342FBD48 Ringkasan
A microcontroller is a programmable system-on-chip that combines a processor core, nonvolatile program memory, data memory, peripheral interfaces, and clocking on one integrated circuit. The LPC1342FBD48 belongs to the LPC13xx family of low-power embedded controllers. Its Arm Cortex-M3 architecture provides a 32-bit processing platform while retaining efficient event-driven control for industrial, instrumentation, communications, and embedded interface applications.
The principal features include a maximum CPU frequency of 72 MHz, up to 16 kB of Flash, up to 4 kB of SRAM, USB Device support, and as many as 40 general-purpose I/O lines. These resources support firmware storage, protocol handling, sensor acquisition, actuator control, and human-interface functions. The 48-LQFP package exposes the required pins through a conventional leaded footprint suitable for prototype boards and established production assemblies.
The LPC1342FBD48 combines the Cortex-M3 processing core with integrated USB and serial peripherals in a device intended to balance functionality, power consumption, and integration. Running at up to 72 MHz provides additional performance margin for protocol stacks and control routines, while the low-power design is appropriate for embedded systems that spend substantial time idle. Exact voltage ranges, current consumption, timer configurations, and USB operating details must be confirmed in the NXP datasheet before final circuit implementation.
Typical uses include USB-connected control panels, industrial data loggers, serial-to-USB adapters, instrumentation front ends, and compact peripheral controllers. A design can use the USB interface for configuration, logging, or control traffic while general-purpose I/O handles sensors, relays, displays, and communication lines. The Cortex-M3 software ecosystem also supports standard embedded development tools and real-time operating systems.
Designers should confirm the supported supply-voltage range, clock configuration, decoupling requirements, programming method, and USB transceiver details in the manufacturer datasheet. PCB planning must preserve the 48-LQFP land pattern, provide clean routing around USB and clock signals, and include the required programming and reset connections. Adequate copper and ground-plane continuity help maintain predictable behavior in compact embedded products.
This page combines the manufacturer product information with ordering-code differences, application guidance, pin-package planning, and drop-in replacement considerations. It is intended to help engineers determine whether the LPC1342FBD48 provides the required CPU, memory, USB connectivity, I/O capacity, and package footprint before beginning a PCB or firmware design.
Alternatif penggantian untuk LPC1342FBD48 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian LPC1342FBD48 (sama faktor bentuk dan footprint) — berbeda di dalam Flash Memory, Package.
LPC1342FBD48,151
✅ Drop-InKontak untuk harga
Lihat Datasheet →LPC1342FBD48,118
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
LPC1342FBD48 Rating Maksimal & Karakteristik Listrik
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Maximum CPU Frequency | 72 MHz |
| Flash Memory | Up to 16 kB |
| Data Memory | Up to 4 kB |
| General-Purpose I/O | Up to 40 lines |
| USB Interface | USB Device |
| Processor Core | Arm Cortex-M3 |
| Architecture | 32-bit |
| Device Family | LPC13xx |
| Paket | 48-LQFP (7 x 7 mm) |
| Package Pin Count | 48 pins |
| Package Type | LQFP |
| Tipe Mounting | Surface mount |
LPC1342FBD48 lqfp Diamant Konfigurasi Panduan
Konfigurasi pin untuk LPC1342FBD48 (lqfp pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk LPC1342FBD48.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
LPC1342FBD48 cocok untuk 6 aplikasis: USB Data Logger, Industrial Sensor Interface, USB-to-Serial Protocol Adapter, Compact Instrumentation Controller, Human-Machine Control Panel, Low-Power Embedded Peripheral.
USB Data Logger
The LPC1342FBD48 fits a USB data logger because its Arm Cortex-M3 core operates up to 72 MHz while USB Device support provides a direct connection to a host computer. Up to 40 general-purpose I/O lines can connect digital sensors, status indicators, and control signals, and up to 16 kB of Flash supports resident firmware. In implementation, place the USB data lines and clock circuitry according to the manufacturer layout guidance, provide the specified decoupling, and use the remaining GPIO for the acquisition and storage subsystem. The Cortex-M3 processor leaves performance headroom for buffering, timestamp handling, and communication protocols, although the design must verify the exact USB operating limits and power requirements from the NXP datasheet.
Direkomendasikan
Industrial Sensor Interface
The LPC1342FBD48 is well suited to an industrial sensor interface because its 40 available general-purpose I/O lines can connect digital sensors, switches, encoders, and alarm inputs without requiring a large discrete interface device. The 72 MHz Cortex-M3 core can supervise acquisition timing, filtering, diagnostics, and a communications protocol. Use the device as the central embedded controller, assigning GPIO groups to sensor inputs and actuator outputs while routing sensitive or high-speed signals away from switching nodes. The integration helps reduce board size and component count, but the finished design must confirm operating-temperature limits, I/O electrical characteristics, supply range, and any required external signal conditioning in the manufacturer documentation.
Direkomendasikan
USB-to-Serial Protocol Adapter
The LPC1342FBD48 can serve as the controller in a USB-to-serial protocol adapter because USB Device is a key peripheral and the Cortex-M3 processor provides up to 72 MHz for framing, buffering, and protocol conversion. General-purpose I/O supports UART, chip-select, reset, and status signaling, while the integrated controller reduces the need for separate interface logic. Place the USB transceiver and connector according to the manufacturer reference configuration, maintain controlled return paths, and isolate external serial lines from sensitive clock and USB routing. Firmware can enumerate as a USB peripheral and translate commands between the host and an external serial device. The exact supported USB modes, transceiver requirements, and electrical limits must be verified before schematic release.
Direkomendasikan
Compact Instrumentation Controller
The LPC1342FBD48 fits a compact instrumentation controller when a design needs moderate processing performance, USB connectivity, and abundant digital I/O in a 48-LQFP package. The 72 MHz Cortex-M3 core can execute control loops, device commands, calibration logic, and status reporting, while up to 16 kB of Flash stores firmware and up to 4 kB of data memory supports short-term buffering. Use GPIO for instrument control and digital measurement interfaces, and use USB for configuration or data transfer. Its integrated architecture helps shorten the design cycle compared with separate processor and interface devices. Before layout, verify clock tolerance, reset behavior, power sequencing, and signal levels against the datasheet, and preserve a clean ground plane for predictable analog-adjacent measurements.
Direkomendasikan
Human-Machine Control Panel
The LPC1342FBD48 can act as the local controller for a human-machine control panel because the Cortex-M3 processor handles menu logic and device communication while up to 40 I/O lines support keys, indicators, alarm signals, and external interface control. USB Device connectivity permits configuration, diagnostics, or firmware-related service traffic when the product architecture includes a host connection. Partition the GPIO by function and place switching elements away from sensitive clock and USB routes to reduce coupling. The 72 MHz operating rate provides performance margin for responsive control and communication tasks, while low-power characteristics support compact embedded equipment. The design must still verify the operating-temperature grade, I/O limits, display or relay interface requirements, and power budget for the complete panel.
Direkomendasikan
Low-Power Embedded Peripheral
The LPC1342FBD48 is appropriate for a low-power embedded peripheral because NXP describes the LPC1342FBD48 as a low-power, highly integrated Cortex-M3 microcontroller with USB and up to 40 I/O lines. It can coordinate low-speed sensors, local controls, and host communication without requiring several discrete interface components. Firmware can disable unused peripherals, manage GPIO states deliberately, and use low-power operating modes where the application permits. The 72 MHz maximum clock is useful during startup, configuration, and data-transfer periods, while the integration supports a compact PCB. Exact sleep currents, wake-up conditions, and operating-mode restrictions must be taken from the manufacturer datasheet because a complete power budget depends on clock choice, enabled peripherals, I/O loading, and board leakage.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk LPC1342FBD48 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | LPC1342FBD48,151 | LPC1342FBD48,118 |
|---|---|---|---|
| Package | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm) | 48-LQFP |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Processor Core | Arm Cortex-M3 | Arm Cortex-M3 | Arm Cortex-M3 |
| Maximum CPU Frequency | 72 MHz | 72 MHz | 72 MHz |
| Flash Memory | Up to 16 kB | 16 kB | 32 kB |
| USB Interface | USB Device | USB Device | USB Device |
| Architecture | 32-bit | 32-bit | 32-bit |
Diferensiator Kunci
- USB integration (vsLPC1342FBD48,118)
- Direct manufacturer part-page identity (vsLPC1342FBD48,151)
- 48-LQFP footprint reuse (vsLPC1342FBD48,118)
Catatan Desain
Use the NXP recommended supply arrangement, decoupling capacitors, and power-pin connections. Confirm the supported input-voltage range, absolute maximum ratings, and internal regulator requirements from the manufacturer datasheet before assigning external rails. Place bulk and high-frequency decoupling close to the relevant supply pins, maintain a continuous ground reference, and review voltage tolerances for every USB transceiver, memory component, and attached peripheral connected to the controller.
Plan the PCB around the exact 48-LQFP footprint and pin numbering in the NXP package drawing. Keep USB traces short, provide a continuous reference plane, and avoid routing high-current switching outputs near USB, clock, or programming signals. The 7 x 7 mm package still requires careful escape routing between its closely spaced leads; check drill, land, solder-mask, paste, and courtyard dimensions against the manufacturer land-pattern guidance.
Route the clock and reset circuitry to minimize susceptibility to noise and accidental triggering. Follow the datasheet guidance for oscillator placement, load capacitors, and startup components, and keep potential clock sources away from switching nodes. Provide a stable reset path and accessible programming interface so firmware can be recovered during development and production without redesigning the main board.
Do not treat LPC1342FBD48, LPC1342FBD48,151, and LPC1342FBD48,118 as interchangeable solely because their names and packages are similar. Confirm the selected suffix's temperature grade, packing method, memory configuration, and shipment format in the current NXP ordering documentation. Also verify USB transceiver requirements and firmware support; a footprint match alone does not validate a complete replacement.
Informasi Konformitas
The available product and distributor information does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm current declarations and qualification records on the NXP product page before production release.