NXP Semiconductors

LPC1342FBD48 - 72MHz Cortex-M3 MCU | NXP Semiconductors

MPN: LPC1342FBD48 ✓ Nakahanda
48-LQFP (7 x 7 mm) Package 72 MHz Speed Up to 16 kB Memory
MOQ: 1 |

LPC1342FBD48 Ulas

The NXP Semiconductors LPC1342FBD48 is an Arm Cortex-M3-based 32-bit microcontroller for embedded applications, operating up to 72 MHz with up to 16 kB of Flash memory and up to 4 kB of data memory in a 48-LQFP 7 x 7 mm package. USB Device connectivity and a broad general-purpose I/O complement make it suitable for compact control, communications, and data-acquisition equipment.

A microcontroller is a programmable system-on-chip that combines a processor core, nonvolatile program memory, data memory, peripheral interfaces, and clocking on one integrated circuit. The LPC1342FBD48 belongs to the LPC13xx family of low-power embedded controllers. Its Arm Cortex-M3 architecture provides a 32-bit processing platform while retaining efficient event-driven control for industrial, instrumentation, communications, and embedded interface applications.

The principal features include a maximum CPU frequency of 72 MHz, up to 16 kB of Flash, up to 4 kB of SRAM, USB Device support, and as many as 40 general-purpose I/O lines. These resources support firmware storage, protocol handling, sensor acquisition, actuator control, and human-interface functions. The 48-LQFP package exposes the required pins through a conventional leaded footprint suitable for prototype boards and established production assemblies.

The LPC1342FBD48 combines the Cortex-M3 processing core with integrated USB and serial peripherals in a device intended to balance functionality, power consumption, and integration. Running at up to 72 MHz provides additional performance margin for protocol stacks and control routines, while the low-power design is appropriate for embedded systems that spend substantial time idle. Exact voltage ranges, current consumption, timer configurations, and USB operating details must be confirmed in the NXP datasheet before final circuit implementation.

Typical uses include USB-connected control panels, industrial data loggers, serial-to-USB adapters, instrumentation front ends, and compact peripheral controllers. A design can use the USB interface for configuration, logging, or control traffic while general-purpose I/O handles sensors, relays, displays, and communication lines. The Cortex-M3 software ecosystem also supports standard embedded development tools and real-time operating systems.

Designers should confirm the supported supply-voltage range, clock configuration, decoupling requirements, programming method, and USB transceiver details in the manufacturer datasheet. PCB planning must preserve the 48-LQFP land pattern, provide clean routing around USB and clock signals, and include the required programming and reset connections. Adequate copper and ground-plane continuity help maintain predictable behavior in compact embedded products.

This page combines the manufacturer product information with ordering-code differences, application guidance, pin-package planning, and drop-in replacement considerations. It is intended to help engineers determine whether the LPC1342FBD48 provides the required CPU, memory, USB connectivity, I/O capacity, and package footprint before beginning a PCB or firmware design.

Mga alternatibo na pwedeng ilagay na LPC1342FBD48 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok LPC1342FBD48 (parehas na form factor at footprint) — pagkakaiba sa Flash Memory, Package.

NXP Semiconductors
Flash Memory: 16 KB (16K x 8)
Package: 48-LQFP (7x7 mm)
Ikabit sa LPC1342FBD48 →

LPC1342FBD48,151

✅ Drop-In
NXP Semiconductors
📦 48-LQFP (7 x 7 mm)
ARM Cortex-M3 · 32-Bit · 72 MHz · 16 KB (16K x 8) · 4 KB · USB Device · 1x Fast-mode Plus (Fm+) · 48-LQFP (7x7 mm)

Magkontak para sa presyo

Tingnan ang Datasheet →

LPC1342FBD48,118

✅ Drop-In
📦 48-LQFP (7 x 7 mm)
Same LPC1342FBD48 base device and 48-LQFP footprint; ,118 identifies the order configuration, while its distributor listing associates the suffix with 32 kB Flash and 8 kB SRAM

📋 Alternatibo na Reference (hindi sa katalogo)

LPC1342FBD48 Mga Pinakamataas na Rating at Electrical Characteristics

Product Type 32-bit ARM Cortex-M3 microcontroller
Maximum CPU Frequency 72 MHz
Flash Memory Up to 16 kB
Data Memory Up to 4 kB
General-Purpose I/O Up to 40 lines
USB Interface USB Device
Processor Core Arm Cortex-M3
Architecture 32-bit
Device Family LPC13xx
Packhaging 48-LQFP (7 x 7 mm)
Package Pin Count 48 pins
Package Type LQFP
Uri ng Pagpapasok Surface mount

Gabay sa Pin Configuration ng LPC1342FBD48 lqfp

Pin configuration para sa LPC1342FBD48 (lqfp package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng lqfp package para sa LPC1342FBD48

Wala ng detalyadong pinout data na magagamit para sa LPC1342FBD48.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

LPC1342FBD48 ay nararapat para sa 6 aplikasyons: USB Data Logger, Industrial Sensor Interface, USB-to-Serial Protocol Adapter, Compact Instrumentation Controller, Human-Machine Control Panel, Low-Power Embedded Peripheral.

🖥️

USB Data Logger

The LPC1342FBD48 fits a USB data logger because its Arm Cortex-M3 core operates up to 72 MHz while USB Device support provides a direct connection to a host computer. Up to 40 general-purpose I/O lines can connect digital sensors, status indicators, and control signals, and up to 16 kB of Flash supports resident firmware. In implementation, place the USB data lines and clock circuitry according to the manufacturer layout guidance, provide the specified decoupling, and use the remaining GPIO for the acquisition and storage subsystem. The Cortex-M3 processor leaves performance headroom for buffering, timestamp handling, and communication protocols, although the design must verify the exact USB operating limits and power requirements from the NXP datasheet.

🏭

Industrial Sensor Interface

The LPC1342FBD48 is well suited to an industrial sensor interface because its 40 available general-purpose I/O lines can connect digital sensors, switches, encoders, and alarm inputs without requiring a large discrete interface device. The 72 MHz Cortex-M3 core can supervise acquisition timing, filtering, diagnostics, and a communications protocol. Use the device as the central embedded controller, assigning GPIO groups to sensor inputs and actuator outputs while routing sensitive or high-speed signals away from switching nodes. The integration helps reduce board size and component count, but the finished design must confirm operating-temperature limits, I/O electrical characteristics, supply range, and any required external signal conditioning in the manufacturer documentation.

🌐

USB-to-Serial Protocol Adapter

The LPC1342FBD48 can serve as the controller in a USB-to-serial protocol adapter because USB Device is a key peripheral and the Cortex-M3 processor provides up to 72 MHz for framing, buffering, and protocol conversion. General-purpose I/O supports UART, chip-select, reset, and status signaling, while the integrated controller reduces the need for separate interface logic. Place the USB transceiver and connector according to the manufacturer reference configuration, maintain controlled return paths, and isolate external serial lines from sensitive clock and USB routing. Firmware can enumerate as a USB peripheral and translate commands between the host and an external serial device. The exact supported USB modes, transceiver requirements, and electrical limits must be verified before schematic release.

🔧

Compact Instrumentation Controller

The LPC1342FBD48 fits a compact instrumentation controller when a design needs moderate processing performance, USB connectivity, and abundant digital I/O in a 48-LQFP package. The 72 MHz Cortex-M3 core can execute control loops, device commands, calibration logic, and status reporting, while up to 16 kB of Flash stores firmware and up to 4 kB of data memory supports short-term buffering. Use GPIO for instrument control and digital measurement interfaces, and use USB for configuration or data transfer. Its integrated architecture helps shorten the design cycle compared with separate processor and interface devices. Before layout, verify clock tolerance, reset behavior, power sequencing, and signal levels against the datasheet, and preserve a clean ground plane for predictable analog-adjacent measurements.

📱

Human-Machine Control Panel

The LPC1342FBD48 can act as the local controller for a human-machine control panel because the Cortex-M3 processor handles menu logic and device communication while up to 40 I/O lines support keys, indicators, alarm signals, and external interface control. USB Device connectivity permits configuration, diagnostics, or firmware-related service traffic when the product architecture includes a host connection. Partition the GPIO by function and place switching elements away from sensitive clock and USB routes to reduce coupling. The 72 MHz operating rate provides performance margin for responsive control and communication tasks, while low-power characteristics support compact embedded equipment. The design must still verify the operating-temperature grade, I/O limits, display or relay interface requirements, and power budget for the complete panel.

🧩

Low-Power Embedded Peripheral

The LPC1342FBD48 is appropriate for a low-power embedded peripheral because NXP describes the LPC1342FBD48 as a low-power, highly integrated Cortex-M3 microcontroller with USB and up to 40 I/O lines. It can coordinate low-speed sensors, local controls, and host communication without requiring several discrete interface components. Firmware can disable unused peripherals, manage GPIO states deliberately, and use low-power operating modes where the application permits. The 72 MHz maximum clock is useful during startup, configuration, and data-transfer periods, while the integration supports a compact PCB. Exact sleep currents, wake-up conditions, and operating-mode restrictions must be taken from the manufacturer datasheet because a complete power budget depends on clock choice, enabled peripherals, I/O loading, and board leakage.

Buod ng mga Inirekomendang Produkto

LPC1342FBD48,151 NXP Semiconductors Ginagamit sa: USB Data Logger, Industrial Sensor Interface, USB-to-Serial Protocol Adapter, Compact Instrumentation Controller, Human-Machine Control Panel, Low-Power Embedded Peripheral LPC1342FBD48,118 Order configuration of the target controller family Ginagamit sa: USB Data Logger, Industrial Sensor Interface, USB-to-Serial Protocol Adapter, Compact Instrumentation Controller, Human-Machine Control Panel, Low-Power Embedded Peripheral
What is the LPC1342FBD48?
The LPC1342FBD48 is a 32-bit NXP Semiconductors microcontroller built around an Arm Cortex-M3 processor and optimized for low-power embedded applications. According to the NXP product page, it operates up to 72 MHz and integrates USB Device connectivity, up to 16 kB of Flash memory, up to 4 kB of data memory, and as many as 40 general-purpose I/O lines in a 48-LQFP package.
What are the key specifications of LPC1342FBD48 that engineers should know?
The key LPC1342FBD48 specifications are a 72 MHz maximum CPU frequency, 32-bit Arm Cortex-M3 architecture, up to 16 kB of Flash, up to 4 kB of data memory, USB Device support, and up to 40 general-purpose I/O lines. The NXP product page identifies the device as a low-power embedded MCU, while the 48-LQFP 7 x 7 mm package provides 48 physical leads for production PCB assembly.
Where can I download the LPC1342FBD48 datasheet PDF?
The LPC1342FBD48 datasheet should be obtained from the official NXP part page at https://www.nxp.com/part/LPC1342FBD48. The manufacturer documentation contains the authoritative pin descriptions, electrical characteristics, memory organization, clock requirements, USB interface details, and package drawings. Use the revision linked from that page for production design and qualification rather than relying on a third-party mirror.
Where can I find the LPC1342FBD48 pinout?
The LPC1342FBD48 pinout is shown in the package and pin-description sections of the NXP manufacturer datasheet. The device uses a 48-LQFP package with leads distributed around all four sides. Assign signals from the manufacturer's pin table and follow its numbered land-pattern drawing to prevent errors in USB routing, programming, reset, clock, and power connections.
Is LPC1342FBD48 suitable for USB embedded applications?
Yes, the LPC1342FBD48 is suitable for USB embedded applications because NXP identifies USB as a key peripheral and describes the MCU as a highly integrated, low-power embedded controller. Its Cortex-M3 core can operate up to 72 MHz for protocol handling, while the I/O complement supports sensors, indicators, and external interfaces. Final USB qualification requires checking the datasheet's electrical limits, clock requirements, and transceiver implementation.
What is the difference between LPC1342FBD48 and LPC1342FBD48,151?
LPC1342FBD48,151 is an ordering designation for the same base LPC1342FBD48 device family and is listed with a 48-LQFP 7 x 7 mm package, 72 MHz Cortex-M3 processor, and 16 kB Flash. The suffix identifies the manufacturer's order configuration, so it is electrically and mechanically interchangeable when its temperature, packing, and shipment requirements match the design.
What is the difference between LPC1342FBD48 and LPC1342FBD48,118?
LPC1342FBD48,118 is another ordering designation associated with the LPC1342FBD48 device and is listed as a 32-bit Cortex-M3 MCU with 32 kB Flash and 8 kB SRAM in distributor catalog information. Before substitution, confirm the exact memory configuration and order-code temperature or packing attributes against the NXP datasheet because distributor summaries for related ordering codes can differ.
What can replace LPC1342FBD48 on the same PCB?
A true drop-in replacement must use the same 48-LQFP footprint, preserve pin assignments, and provide compatible supply, clock, USB, memory, and peripheral functions. The directly documented ordering alternatives are LPC1342FBD48,151 and LPC1342FBD48,118, subject to confirmation of their order attributes. Use the manufacturer part page and datasheet to verify that the selected suffix meets the production requirements before releasing the substitution.
Is LPC1342FBD48 the same as LPC1342FBD48,151?
LPC1342FBD48,151 is an orderable suffix of the LPC1342FBD48 base device, and both are associated with the same Cortex-M3 microcontroller family and 48-LQFP 7 x 7 mm package. They are generally interchangeable when the ,151 configuration satisfies the required temperature grade, packing method, and shipment format. Confirm those order attributes in the manufacturer documentation.
When should I choose LPC1342FBD48 over another LPC microcontroller?
Choose the LPC1342FBD48 when the design needs an Arm Cortex-M3 MCU operating up to 72 MHz, USB Device connectivity, as many as 40 I/O lines, and a 48-LQFP footprint. It is particularly appropriate for compact embedded controllers that combine protocol handling with external sensors or actuators. Select another LPC device when higher memory capacity, a different package, or additional specialized peripherals are required.
Is LPC1342FBD48 suitable for an industrial data logger?
Yes, the LPC1342FBD48 can suit an industrial data logger when its I/O count, memory, clock speed, and USB requirements match the logger architecture. The 40-line I/O complement can connect sensors and status signals, while the 72 MHz Cortex-M3 core provides processing margin for sampling control, buffering, and USB communication. Confirm temperature range, analog peripherals, and power specifications in the NXP datasheet before deployment.
What power-management considerations apply to an LPC1342FBD48 design?
An LPC1342FBD48 design should use the manufacturer's recommended supply range, decoupling network, clock arrangement, and power-control configuration. Because the controller is intended for low-power embedded operation, unused peripherals and I/O states should be configured deliberately to reduce unnecessary current draw. Exact voltage, current, and sleep-state figures must be selected from the datasheet rather than inferred from the 72 MHz clock rating.
Does the LPC1342FBD48 require a heatsink?
The LPC1342FBD48 is a microcontroller rather than a discrete power transistor, and no external heatsink requirement can be established from the package information alone. Thermal performance depends on supply voltage, clock activity, GPIO loading, ambient temperature, PCB construction, and duty cycle. Use the NXP thermal and operating information together with the finished board layout to determine whether additional copper or cooling is necessary.
Where can I buy LPC1342FBD48 and request a quote?
Use the Request a Quote form on this product page to request LPC1342FBD48 pricing, stock confirmation, current lead time, and order quantities. The form provides a direct purchasing path without presenting static prices that may become outdated. Include the required LPC1342FBD48 order suffix, delivery quantity, and packaging preference in the request.
What is the lead time for LPC1342FBD48?
Current LPC1342FBD48 lead time depends on the selected order suffix, factory inventory, requested quantity, and shipment destination. Request the current schedule through the Request a Quote form on this page rather than relying on a historical availability statement. Providing a forecast quantity and target date will allow procurement to confirm the most relevant allocation information.
Is LPC1342FBD48 RoHS compliant and qualified for automotive use?
The RoHS and AEC-Q100 status of LPC1342FBD48 cannot be confirmed from the basic part description and should be checked against the current NXP product documentation or declaration. RoHS governs restricted substances in electronic products, while AEC-Q100 addresses qualification for automotive-grade integrated circuits. Do not infer automotive qualification merely from the industrial ordering description or from the absence of a -Q1 suffix.

Impormasyon ng Talumpati sa Engineering for LPC1342FBD48 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the base LPC1342FBD48 when its documented up-to-16 kB Flash, up-to-4 kB data memory, 72 MHz Cortex-M3 performance, USB Device support, and 40-line I/O complement match an embedded design. Select LPC1342FBD48,151 when its listed 16 kB Flash configuration and specific order attributes satisfy the manufacturing requirement while retaining the same 48-LQFP footprint. Consider LPC1342FBD48,118 only after confirming its cataloged 32 kB Flash and 8 kB SRAM configuration, because those figures differ from the base part's NXP description. No cross-brand drop-in replacement was identified, and changing MCU architecture is generally a redesign rather than a substitution. For production, verify pin assignments, clocking, USB implementation, power rails, temperature range, qualification, and programming requirements in the current NXP documentation.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto LPC1342FBD48,151 LPC1342FBD48,118
Package 48-LQFP (7 x 7 mm) 48-LQFP (7 x 7 mm) 48-LQFP
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors
Processor Core Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3
Maximum CPU Frequency 72 MHz 72 MHz 72 MHz
Flash Memory Up to 16 kB 16 kB 32 kB
USB Interface USB Device USB Device USB Device
Architecture 32-bit 32-bit 32-bit

Pangunahing mga Pagkakaiba

  • USB integration (kumpara saLPC1342FBD48,118)
  • Direct manufacturer part-page identity (kumpara saLPC1342FBD48,151)
  • 48-LQFP footprint reuse (kumpara saLPC1342FBD48,118)

Talaan ng Disenyo

Use the NXP recommended supply arrangement, decoupling capacitors, and power-pin connections. Confirm the supported input-voltage range, absolute maximum ratings, and internal regulator requirements from the manufacturer datasheet before assigning external rails. Place bulk and high-frequency decoupling close to the relevant supply pins, maintain a continuous ground reference, and review voltage tolerances for every USB transceiver, memory component, and attached peripheral connected to the controller.

Plan the PCB around the exact 48-LQFP footprint and pin numbering in the NXP package drawing. Keep USB traces short, provide a continuous reference plane, and avoid routing high-current switching outputs near USB, clock, or programming signals. The 7 x 7 mm package still requires careful escape routing between its closely spaced leads; check drill, land, solder-mask, paste, and courtyard dimensions against the manufacturer land-pattern guidance.

Route the clock and reset circuitry to minimize susceptibility to noise and accidental triggering. Follow the datasheet guidance for oscillator placement, load capacitors, and startup components, and keep potential clock sources away from switching nodes. Provide a stable reset path and accessible programming interface so firmware can be recovered during development and production without redesigning the main board.

Do not treat LPC1342FBD48, LPC1342FBD48,151, and LPC1342FBD48,118 as interchangeable solely because their names and packages are similar. Confirm the selected suffix's temperature grade, packing method, memory configuration, and shipment format in the current NXP ordering documentation. Also verify USB transceiver requirements and firmware support; a footprint match alone does not validate a complete replacement.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The available product and distributor information does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm current declarations and qualification records on the NXP product page before production release.

Data napatotohanan sa: 2026-11-10 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

LPC1342FBD48 datasheet LPC1342FBD48 datasheet pdf LPC1342FBD48 pinout LPC1342FBD48 equivalent LPC1342FBD48 replacement LPC1342FBD48 cross reference LPC1342FBD48 footprint LPC1342FBD48 application circuit NXP LPC1342FBD48 LPC1342FBD48 price LPC1342FBD48 stock LPC1342FBD48 vs LPC1342FBD48,118 LPC1342FBD48 USB microcontroller LPC1342FBD48 48-LQFP pinout LPC1342FBD48 programming

Mga kaugnay na Mga Komponente at mga Tuntunin

NXP Semiconductors LPC1342FBD48 LPC1342FBD48,151 LPC1342FBD48,118 Arm Arm Cortex-M3 LPC13xx 32-bit microcontroller embedded microcontroller USB Device Universal Serial Bus Flash memory SRAM general-purpose I/O 48-LQFP LQFP surface-mount package 7 x 7 mm package 72 MHz embedded systems industrial data logging USB-to-serial conversion low-power electronics NXP product page RoHS REACH AEC-Q100
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ